99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7208 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7208. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7208 dimensions and recorded technical data

The recorded 7208 base designation measures 40×80×18 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 98 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7208Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
44.1 kN25.1 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 9600 min-10.382 kg382 g
SKF7208 ACCBMSingle row angular contact ball bearing with 25° contact angle
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
41.5 kN29 kN11000 rpm17000 rpm0.385 kg385 g
SKF7208 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
31.9 kN22.8 kN——0.321 kg321 g
SKF7208 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
31.9 kN22.8 kN——0.367 kg367 g
SKF7208 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
31.9 kN22.8 kN——0.367 kg367 g
SKF7208 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
31.9 kN22.8 kN——0.367 kg367 g
SKF7208 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
31.9 kN22.8 kN——0.321 kg321 g
SKF7208 ACD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
52 kN45.5 kN——0.643 kg643 g
SKF7208 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
31.9 kN22.8 kN——0.367 kg367 g
SKF7208 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
52 kN45.5 kN——0.734 kg734 g
SKF7208 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
52 kN45.5 kN——0.734 kg734 g
SKF7208 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
52 kN45.5 kN——0.734 kg734 g
SKF7208 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
52 kN45.5 kN——0.734 kg734 g
SKF7208 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
52 kN45.5 kN——0.734 kg734 g
SKF7208 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
52 kN45.5 kN——0.738 kg738 g
SKF7208 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
52 kN45.5 kN——0.734 kg734 g
SKF7208 ACD/P4AQBTCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
72 mm
2.834646 in
85.2 kN91.5 kN——1.47 kg1470 g
SKF7208 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
54 mm
2.125984 in
68.9 kN69.5 kN——1.1 kg1100 g
SKF7208 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
54 mm
2.125984 in
68.9 kN69.5 kN——1.1 kg1100 g
SKF7208 BE-2RZPSingle row angular contact ball bearing with 40° contact angle and non-contact seals on both sides
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
34.5 kN24 kN11000 rpm8000 rpm0.36 kg360 g
SKF7208 BECBJSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36.5 kN26 kN11000 rpm11000 rpm0.381 kg381 g
SKF7208 BECBMSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36.5 kN26 kN11000 rpm14000 rpm0.385 kg385 g
SKF7208 BECBM/W64Single row angular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
34.5 kN24 kN11000 rpm12000 rpm0.392 kg392 g
SKF7208 BECBPSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36.5 kN26 kN11000 rpm11000 rpm0.356 kg356 g
SKF7208 BECBYSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36.5 kN26 kN11000 rpm11000 rpm0.395 kg395 g
SKF7208 BECBY/W64Single row angular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
34.5 kN24 kN11000 rpm10000 rpm0.395 kg395 g
SKF7208 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36.5 kN26 kN11000 rpm11000 rpm0.356 kg356 g
SKF7208 BEGBYSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36.5 kN26 kN11000 rpm11000 rpm0.4 kg400 g
SKF7208 BEPSingle row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
34.5 kN24 kN11000 rpm10000 rpm0.356 kg356 g
SKF7208 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
33.8 kN24 kN——0.321 kg321 g
SKF7208 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
33.8 kN24 kN——0.367 kg367 g
SKF7208 CDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
33.8 kN24 kN——0.321 kg321 g
SKF7208 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
33.8 kN24 kN——0.367 kg367 g
SKF7208 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
33.8 kN24 kN——0.367 kg367 g
SKF7208 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
33.8 kN24 kN——0.321 kg321 g
SKF7208 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.643 kg643 g
SKF7208 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
33.8 kN24 kN——0.367 kg367 g
SKF7208 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.734 kg734 g
SKF7208 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.734 kg734 g
SKF7208 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.734 kg734 g
SKF7208 CD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.734 kg734 g
SKF7208 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.734 kg734 g
SKF7208 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.734 kg734 g
SKF7208 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.738 kg738 g
SKF7208 CD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.734 kg734 g
SKF7208 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
55.3 kN48 kN——0.734 kg734 g
SKF7208 CD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
72 mm
2.834646 in
88.4 kN96.5 kN——1.48 kg1480 g
FAG7208-B-XL-2RS-TVPAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN—5000 rpm0.373 kg373 g
FAG7208-B-XL-2RS-TVP-ULAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN—5000 rpm0.373 kg373 g
FAG7208-B-XL-JPAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.386 kg386 g
FAG7208-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.386 kg386 g
FAG7208-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.386 kg386 g
FAG7208-B-XL-MPAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm15500 rpm0.407 kg407 g
FAG7208-B-XL-MP-UAAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm15500 rpm0.407 kg407 g
FAG7208-B-XL-MP-UBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm15500 rpm0.407 kg407 g
FAG7208-B-XL-MP-UOAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm15500 rpm0.407 kg407 g
FAG7208-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.367 kg367 g
FAG7208-B-XL-TVP-P5Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.367 kg367 g
FAG7208-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.367 kg367 g
FAG7208-B-XL-TVP-P5-UOAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.367 kg367 g
FAG7208-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.367 kg367 g
FAG7208-B-XL-TVP-UBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.367 kg367 g
FAG7208-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
36 kN23.5 kN8600 rpm11900 rpm0.367 kg367 g
TIMKEN7208WNAngular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
32.1 kN23 kN——0.33 kg330 g
TIMKEN7208WNMBRSUAngular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
32.1 kN23 kN——0.33 kg330 g
TIMKEN7208WNSUAngular contact ball bearing
Recorded bore (d)
40 mm
1.574803 in
Recorded outside dimension (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
32.1 kN23 kN——0.33 kg330 g
NSK7208AWAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Individual bearing width (B)
18 mm
0.708661 in
39 kN25.1 kN——0.375 kg375 g
NSK7208AWDBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
63 kN50.5 kN———
NSK7208AWDFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
63 kN50.5 kN———
NSK7208AWDTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
63 kN50.5 kN———
NSK7208BEAT85Angular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Individual bearing width (B)
18 mm
0.708661 in
40.5 kN24.5 kN——0.357 kg357 g
NSK7208BWAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Individual bearing width (B)
18 mm
0.708661 in
35.5 kN23 kN——0.383 kg383 g
NSK7208BWDBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
57.5 kN46 kN———
NSK7208BWDFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
57.5 kN46 kN———
NSK7208BWDTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
57.5 kN46 kN———
KOYO7208BAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
40.2 kN23 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 8000 min-10.382 kg382 g
KOYO7208BDBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
65.2 kN45.9 kN—4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6400 min-10.764 kg764 g
KOYO7208BDB FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
62.1 kN42.7 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 8000 min-10.764 kg764 g
KOYO7208BDFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
65.2 kN45.9 kN—4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6400 min-10.764 kg764 g
KOYO7208BDF FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
62.1 kN42.7 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 8000 min-10.764 kg764 g
KOYO7208BDTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
65.2 kN45.9 kN—4800 rpmLimiting Speeds(Grease Lub.): 4800 min-1Limiting Speeds(Oil Lub.): 6400 min-10.764 kg764 g
KOYO7208BDT FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
62.1 kN42.7 kN—6000 rpmLimiting Speeds(Grease Lub.): 6000 min-1Limiting Speeds(Oil Lub.): 8000 min-10.764 kg764 g
KOYO7208B FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
38.2 kN21.3 kN—7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1Limiting Speeds(Oil Lub.): 10000 min-10.382 kg382 g
KOYO7208CAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
47.7 kN27.1 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 14000 min-10.382 kg382 g
KOYO7208CDBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
77.6 kN54.3 kN—8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 12000 min-10.764 kg764 g
KOYO7208CDB FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
73.8 kN50.4 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.764 kg764 g
KOYO7208CDFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
77.6 kN54.3 kN—8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 12000 min-10.764 kg764 g
KOYO7208CDF FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
73.8 kN50.4 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.764 kg764 g
KOYO7208CDTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
77.6 kN54.3 kN—8800 rpmLimiting Speeds(Grease Lub.): 8800 min-1Limiting Speeds(Oil Lub.): 12000 min-10.764 kg764 g
KOYO7208CDT FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
73.8 kN50.4 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.764 kg764 g
KOYO7208C FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
45.4 kN25.2 kN—14000 rpmLimiting Speeds(Grease Lub.): 14000 min-1Limiting Speeds(Oil Lub.): 18000 min-10.382 kg382 g
KOYO7208DBAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
71.7 kN50.3 kN—6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8000 min-10.764 kg764 g
KOYO7208DB FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
68.2 kN46.7 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 10000 min-10.764 kg764 g
KOYO7208DFAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
71.7 kN50.3 kN—6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8000 min-10.764 kg764 g
KOYO7208DF FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
68.2 kN46.7 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 10000 min-10.764 kg764 g
KOYO7208DTAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
71.7 kN50.3 kN—6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8000 min-10.764 kg764 g
KOYO7208DT FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
36 mm
1.417323 in
68.2 kN46.7 kN—8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 10000 min-10.764 kg764 g
KOYO7208 FYAngular contact ball bearing
Bore diameter (d)
40 mm
1.574803 in
Outside diameter (D)
80 mm
3.149606 in
Width (B)
18 mm
0.708661 in
42 kN23.3 kN—10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 12000 min-10.382 kg382 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7208Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7208 ACCBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7208 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7208 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7208 ACD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7208 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4AQBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 BE-2RZPSeal on both sidesNormalNot recordedNon-metallicBearing steelGrease
SKF 7208 BECBJWithoutP6Not recordedSteel sheet metalBearing steelNone
SKF 7208 BECBMWithoutP6Not recordedMachined brassBearing steelNone
SKF 7208 BECBM/W64WithoutNot recordedNot recordedMachined brassBearing steelSolid Oil
SKF 7208 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7208 BECBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7208 BECBY/W64WithoutNot recordedNot recordedBrass sheet metalBearing steelSolid Oil
SKF 7208 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7208 BEGBYWithoutP6Not recordedBrass sheet metalBearing steelNone
SKF 7208 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
SKF 7208 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7208 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7208 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7208 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7208 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADGDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7208 CD/P4AQBCCWithoutNot recordedNot recordedNot recordedBearing steelNone
FAG 7208-B-XL-2RS-TVP2RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 7208-B-XL-2RS-TVP-UL2RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 7208-B-XL-JPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7208-B-XL-JP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7208-B-XL-JP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7208-B-XL-MPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7208-B-XL-MP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7208-B-XL-MP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7208-B-XL-MP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedMP — Solid brass cage, ball guidedNot recordedWithout — Bearing not greased
FAG 7208-B-XL-TVPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7208-B-XL-TVP-P5Without — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7208-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7208-B-XL-TVP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7208-B-XL-TVP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7208-B-XL-TVP-UBWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7208-B-XL-TVP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
TIMKEN 7208WNOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7208WNMBRSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
TIMKEN 7208WNSUOpenNot recordedNot recordedBrass cageNot recordedNot recorded
NSK 7208AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7208AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7208AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7208AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7208BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7208BWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7208BWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7208BWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7208BWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7208BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7208 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7208

Angular contact ball bearing

View full technical record →SKF

7208 ACCBM

Single row angular contact ball bearing with 25° contact angle

View full technical record →SKF

7208 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7208 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7208 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7208 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7208 ACD/HCP4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7208 ACD/HCP4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7208 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7208 ACD/P4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7208 ACD/P4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7208 ACD/P4ADBC

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →
Filter all 98 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search