99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7201 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7201. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7201 dimensions and recorded technical data

The recorded 7201 base designation measures 12×32×10 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 73 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO7201Angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
10 kN4.05 kN—21000 rpmLimiting Speeds(Grease Lub.): 21000 min-1Limiting Speeds(Oil Lub.): 27000 min-10.038 kg38 g
SKF7201 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.72 kN2.45 kN——0.033 kg33 g
SKF7201 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.72 kN2.45 kN——0.037 kg37 g
SKF7201 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.72 kN2.45 kN——0.033 kg33 g
SKF7201 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.72 kN2.45 kN——0.037 kg37 g
SKF7201 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.72 kN2.45 kN——0.037 kg37 g
SKF7201 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.72 kN2.45 kN——0.037 kg37 g
SKF7201 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.23 kN4.9 kN——0.073 kg73 g
SKF7201 ACD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.23 kN4.9 kN——0.073 kg73 g
SKF7201 ACD/P4ADFDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.23 kN4.9 kN——0.073 kg73 g
SKF7201 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.23 kN4.9 kN——0.073 kg73 g
SKF7201 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.23 kN4.9 kN——0.073 kg73 g
SKF7201 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.23 kN4.9 kN——0.074 kg74 g
SKF7201 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
30 mm
1.181102 in
12.4 kN7.35 kN——0.11 kg110 g
SKF7201 BECBPSingle row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.61 kN3.8 kN28000 rpm26000 rpm0.0356 kg35.6 g
SKF7201 BEGAPSingle row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.61 kN3.8 kN28000 rpm26000 rpm0.0356 kg35.6 g
SKF7201 BEPSingle row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.61 kN3.8 kN28000 rpm26000 rpm0.0356 kg35.6 g
SKF7201 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.85 kN2.55 kN——0.033 kg33 g
SKF7201 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.85 kN2.55 kN——0.037 kg37 g
SKF7201 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.85 kN2.55 kN——0.037 kg37 g
SKF7201 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.85 kN2.55 kN——0.033 kg33 g
SKF7201 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.56 kN5.1 kN——0.065 kg65 g
SKF7201 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
5.85 kN2.55 kN——0.037 kg37 g
SKF7201 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.56 kN5.1 kN——0.073 kg73 g
SKF7201 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.56 kN5.1 kN——0.073 kg73 g
SKF7201 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.56 kN5.1 kN——0.073 kg73 g
SKF7201 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.56 kN5.1 kN——0.073 kg73 g
SKF7201 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.56 kN5.1 kN——0.073 kg73 g
SKF7201 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
9.56 kN5.1 kN——0.073 kg73 g
FAG7201-B-XL-2RS-TVPAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN—14800 rpm0.0357 kg35.7 g
FAG7201-B-XL-2RS-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN—14800 rpm0.036 kg36 g
FAG7201-B-XL-2RS-TVP-UAAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN—14800 rpm0.036 kg36 g
FAG7201-B-XL-2RS-TVP-UOAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN—14800 rpm0.036 kg36 g
FAG7201-B-XL-JPAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN21100 rpm33000 rpm0.042 kg42 g
FAG7201-B-XL-JP-UAAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN21100 rpm33000 rpm0.042 kg42 g
FAG7201-B-XL-JP-UOAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN21100 rpm33000 rpm0.042 kg42 g
FAG7201-B-XL-TVPAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN21100 rpm33000 rpm0.035 kg35 g
FAG7201-B-XL-TVP-P5-ULAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN21100 rpm33000 rpm0.035 kg35 g
FAG7201-B-XL-TVP-P5-UOAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN21100 rpm33000 rpm0.035 kg35 g
FAG7201-B-XL-TVP-UAAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN21100 rpm33000 rpm0.035 kg35 g
FAG7201-B-XL-TVP-UOAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
7.9 kN3.55 kN21100 rpm33000 rpm0.035 kg35 g
NSK7201AWAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Individual bearing width (B)
10 mm
0.393701 in
8.8 kN4.05 kN——0.037 kg37 g
NSK7201AWDBAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
14.3 kN8.05 kN———
NSK7201AWDFAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
14.3 kN8.05 kN———
NSK7201AWDTAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
14.3 kN8.05 kN———
NSK7201BEAT85Angular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Individual bearing width (B)
10 mm
0.393701 in
8.5 kN3.75 kN——0.036 kg36 g
NSK7201BWAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Individual bearing width (B)
10 mm
0.393701 in
8.15 kN3.75 kN——0.038 kg38 g
NSK7201BWDBAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
13.3 kN7.5 kN———
NSK7201BWDFAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
13.3 kN7.5 kN———
NSK7201BWDTAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
13.3 kN7.5 kN———
KOYO7201BAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
9.3 kN3.75 kN—16000 rpmLimiting Speeds(Grease Lub.): 16000 min-1Limiting Speeds(Oil Lub.): 21000 min-10.038 kg38 g
KOYO7201BDBAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
15.1 kN7.5 kN—12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.076 kg76 g
KOYO7201BDB FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
14 kN6.8 kN—16000 rpmLimiting Speeds(Grease Lub.): 16000 min-1Limiting Speeds(Oil Lub.): 22000 min-10.076 kg76 g
KOYO7201BDFAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
15.1 kN7.5 kN—12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.076 kg76 g
KOYO7201BDF FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
14 kN6.8 kN—16000 rpmLimiting Speeds(Grease Lub.): 16000 min-1Limiting Speeds(Oil Lub.): 22000 min-10.076 kg76 g
KOYO7201BDTAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
15.1 kN7.5 kN—12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1Limiting Speeds(Oil Lub.): 17000 min-10.076 kg76 g
KOYO7201BDT FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
14 kN6.8 kN—16000 rpmLimiting Speeds(Grease Lub.): 16000 min-1Limiting Speeds(Oil Lub.): 22000 min-10.076 kg76 g
KOYO7201B FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
8.65 kN3.4 kN—20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1Limiting Speeds(Oil Lub.): 27000 min-10.038 kg38 g
KOYO7201CAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
10.6 kN4.3 kN—30000 rpmLimiting Speeds(Grease Lub.): 30000 min-1Limiting Speeds(Oil Lub.): 40000 min-10.038 kg38 g
KOYO7201CDBAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
17.2 kN8.55 kN—24000 rpmLimiting Speeds(Grease Lub.): 24000 min-1Limiting Speeds(Oil Lub.): 32000 min-10.076 kg76 g
KOYO7201CDB FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
16 kN7.7 kN—30000 rpmLimiting Speeds(Grease Lub.): 30000 min-1Limiting Speeds(Oil Lub.): 40000 min-10.076 kg76 g
KOYO7201CDFAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
17.2 kN8.55 kN—24000 rpmLimiting Speeds(Grease Lub.): 24000 min-1Limiting Speeds(Oil Lub.): 32000 min-10.076 kg76 g
KOYO7201CDF FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
16 kN7.7 kN—30000 rpmLimiting Speeds(Grease Lub.): 30000 min-1Limiting Speeds(Oil Lub.): 40000 min-10.076 kg76 g
KOYO7201CDTAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
17.2 kN8.55 kN—24000 rpmLimiting Speeds(Grease Lub.): 24000 min-1Limiting Speeds(Oil Lub.): 32000 min-10.076 kg76 g
KOYO7201CDT FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
16 kN7.7 kN—30000 rpmLimiting Speeds(Grease Lub.): 30000 min-1Limiting Speeds(Oil Lub.): 40000 min-10.076 kg76 g
KOYO7201C FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
9.9 kN3.85 kN—38000 rpmLimiting Speeds(Grease Lub.): 38000 min-1Limiting Speeds(Oil Lub.): 50000 min-10.038 kg38 g
KOYO7201DBAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
16.2 kN8.05 kN—17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 21000 min-10.076 kg76 g
KOYO7201DB FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
15.1 kN7.25 kN—22000 rpmLimiting Speeds(Grease Lub.): 22000 min-1Limiting Speeds(Oil Lub.): 27000 min-10.076 kg76 g
KOYO7201DFAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
16.2 kN8.05 kN—17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 21000 min-10.076 kg76 g
KOYO7201DF FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
15.1 kN7.25 kN—22000 rpmLimiting Speeds(Grease Lub.): 22000 min-1Limiting Speeds(Oil Lub.): 27000 min-10.076 kg76 g
KOYO7201DTAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
16.2 kN8.05 kN—17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 21000 min-10.076 kg76 g
KOYO7201DT FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
20 mm
0.787402 in
15.1 kN7.25 kN—22000 rpmLimiting Speeds(Grease Lub.): 22000 min-1Limiting Speeds(Oil Lub.): 27000 min-10.076 kg76 g
KOYO7201 FYAngular contact ball bearing
Bore diameter (d)
12 mm
0.472441 in
Outside diameter (D)
32 mm
1.259843 in
Width (B)
10 mm
0.393701 in
9.3 kN3.65 kN—27000 rpmLimiting Speeds(Grease Lub.): 27000 min-1Limiting Speeds(Oil Lub.): 34000 min-10.038 kg38 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 7201Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7201 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7201 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7201 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACD/P4ADFDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 BECBPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7201 BEGAPWithoutP6Not recordedNon-metallicBearing steelNone
SKF 7201 BEPWithoutNormalNot recordedNon-metallicBearing steelNone
SKF 7201 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7201 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7201 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7201 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7201 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
FAG 7201-B-XL-2RS-TVP2RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 7201-B-XL-2RS-TVP-P5-UL2RS — Contact seal on both sidesP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 7201-B-XL-2RS-TVP-UA2RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 7201-B-XL-2RS-TVP-UO2RS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedGA14 — Ball bearing grease, low noise
FAG 7201-B-XL-JPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7201-B-XL-JP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7201-B-XL-JP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 7201-B-XL-TVPWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7201-B-XL-TVP-P5-ULWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7201-B-XL-TVP-P5-UOWithout — Not sealedP5 — Class 5 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7201-B-XL-TVP-UAWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
FAG 7201-B-XL-TVP-UOWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVP — Solid cage made of glass-fiber reinforced polyamid PA66Not recordedWithout — Bearing not greased
NSK 7201AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7201AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7201AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7201AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7201BEAT85Not recordedNot recordedNot recordedPolyamide 46 resinNot recordedNot recorded
NSK 7201BWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7201BWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7201BWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7201BWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7201BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201BDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201BDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201BDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201CNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201CDBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201CDFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201CDTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201DBNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201DFNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201DTNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7201 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

7201

Angular contact ball bearing

View full technical record →SKF

7201 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7201 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7201 ACDGB/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7201 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7201 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7201 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7201 ACD/P4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7201 ACD/P4ADFA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7201 ACD/P4ADFD

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7201 ACD/P4ADGA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7201 ACD/P4ADGB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →
Filter all 73 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search