Find · understand · compare
7200 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7200. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7200 dimensions and recorded technical data
The recorded 7200 base designation measures 10×30×9 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 62 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| KOYO7200Angular contact ball bearing |
| 6.75 kN | 2.75 kN | — | 23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1Limiting Speeds(Oil Lub.): 29000 min-1 | 0.031 kg31 g |
| SKF7200 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.36 kN | 1.86 kN | — | — | 0.03 kg30 g |
| SKF7200 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.36 kN | 1.86 kN | — | — | 0.026 kg26 g |
| SKF7200 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.36 kN | 1.86 kN | — | — | 0.03 kg30 g |
| SKF7200 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 4.36 kN | 1.86 kN | — | — | 0.026 kg26 g |
| SKF7200 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 4.36 kN | 1.86 kN | — | — | 0.03 kg30 g |
| SKF7200 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 7.02 kN | 3.65 kN | — | — | 0.06 kg60 g |
| SKF7200 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 7.02 kN | 3.65 kN | — | — | 0.06 kg60 g |
| SKF7200 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 7.02 kN | 3.65 kN | — | — | 0.06 kg60 g |
| SKF7200 BECBPSingle row angular contact ball bearing |
| 7.02 kN | 3.35 kN | 32000 rpm | 30000 rpm | 0.0298 kg29.8 g |
| SKF7200 BEGAPSingle row angular contact ball bearing |
| 7.02 kN | 3.35 kN | 32000 rpm | 30000 rpm | 0.0298 kg29.8 g |
| SKF7200 BEPSingle row angular contact ball bearing |
| 7.02 kN | 3.35 kN | 32000 rpm | 30000 rpm | 0.0298 kg29.8 g |
| SKF7200 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.49 kN | 1.93 kN | — | — | 0.03 kg30 g |
| SKF7200 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.49 kN | 1.93 kN | — | — | 0.03 kg30 g |
| SKF7200 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 4.49 kN | 1.93 kN | — | — | 0.026 kg26 g |
| SKF7200 CD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 7.28 kN | 3.8 kN | — | — | 0.053 kg53 g |
| SKF7200 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 4.49 kN | 1.93 kN | — | — | 0.03 kg30 g |
| SKF7200 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 7.28 kN | 3.8 kN | — | — | 0.06 kg60 g |
| SKF7200 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 7.28 kN | 3.8 kN | — | — | 0.06 kg60 g |
| SKF7200 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 7.28 kN | 3.8 kN | — | — | 0.06 kg60 g |
| FAG7200-B-XL-2RS-TVPAngular contact ball bearing |
| 5.6 kN | 2.6 kN | — | 16100 rpm | 0.031 kg31 g |
| FAG7200-B-XL-2RS-TVP-L212Angular contact ball bearing |
| 5.6 kN | 2.6 kN | — | 16100 rpm | 0.033 kg33 g |
| FAG7200-B-XL-2RS-TVP-ULAngular contact ball bearing |
| 5.6 kN | 2.6 kN | — | 16100 rpm | 0.032 kg32 g |
| FAG7200-B-XL-JPAngular contact ball bearing |
| 5.6 kN | 2.6 kN | 22600 rpm | 37500 rpm | 0.033 kg33 g |
| FAG7200-B-XL-JP-UAAngular contact ball bearing |
| 5.6 kN | 2.6 kN | 22600 rpm | 37500 rpm | 0.035 kg35 g |
| FAG7200-B-XL-JP-UOAngular contact ball bearing |
| 5.6 kN | 2.6 kN | 22600 rpm | 37500 rpm | 0.031 kg31 g |
| FAG7200-B-XL-MPAngular contact ball bearing |
| 5.6 kN | 2.6 kN | 22600 rpm | 49000 rpm | 0.031 kg31 g |
| FAG7200-B-XL-TVPAngular contact ball bearing |
| 5.6 kN | 2.6 kN | 22600 rpm | 37500 rpm | 0.032 kg32 g |
| FAG7200-B-XL-TVP-UAAngular contact ball bearing |
| 5.6 kN | 2.6 kN | 22600 rpm | 37500 rpm | 0.03 kg30 g |
| FAG7200-B-XL-TVP-ULAngular contact ball bearing |
| 5.6 kN | 2.6 kN | 22600 rpm | 37500 rpm | 0.032 kg32 g |
| FAG7200-B-XL-TVP-UOAngular contact ball bearing |
| 5.6 kN | 2.6 kN | 22600 rpm | 37500 rpm | 0.032 kg32 g |
| NSK7200AWAngular contact ball bearing |
| 5.95 kN | 2.71 kN | — | — | 0.032 kg32 g |
| NSK7200AWDBAngular contact ball bearing |
| 9.7 kN | 5.4 kN | — | — | — |
| NSK7200AWDFAngular contact ball bearing |
| 9.7 kN | 5.4 kN | — | — | — |
| NSK7200AWDTAngular contact ball bearing |
| 9.7 kN | 5.4 kN | — | — | — |
| NSK7200BWAngular contact ball bearing |
| 5.5 kN | 2.5 kN | — | — | 0.032 kg32 g |
| NSK7200BWDBAngular contact ball bearing |
| 8.9 kN | 5 kN | — | — | — |
| NSK7200BWDFAngular contact ball bearing |
| 8.9 kN | 5 kN | — | — | — |
| NSK7200BWDTAngular contact ball bearing |
| 8.9 kN | 5 kN | — | — | — |
| KOYO7200BAngular contact ball bearing |
| 6.2 kN | 2.5 kN | — | 17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 23000 min-1 | 0.031 kg31 g |
| KOYO7200BDBAngular contact ball bearing |
| 10.1 kN | 5.05 kN | — | 14000 rpmLimiting Speeds(Grease Lub.): 14000 min-1Limiting Speeds(Oil Lub.): 18000 min-1 | 0.062 kg62 g |
| KOYO7200BDB FYAngular contact ball bearing |
| 8.7 kN | 4.05 kN | — | 18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 23000 min-1 | 0.062 kg62 g |
| KOYO7200BDFAngular contact ball bearing |
| 10.1 kN | 5.05 kN | — | 14000 rpmLimiting Speeds(Grease Lub.): 14000 min-1Limiting Speeds(Oil Lub.): 18000 min-1 | 0.062 kg62 g |
| KOYO7200BDF FYAngular contact ball bearing |
| 8.7 kN | 4.05 kN | — | 18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 23000 min-1 | 0.062 kg62 g |
| KOYO7200BDTAngular contact ball bearing |
| 10.1 kN | 5.05 kN | — | 14000 rpmLimiting Speeds(Grease Lub.): 14000 min-1Limiting Speeds(Oil Lub.): 18000 min-1 | 0.062 kg62 g |
| KOYO7200BDT FYAngular contact ball bearing |
| 8.7 kN | 4.05 kN | — | 18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 23000 min-1 | 0.062 kg62 g |
| KOYO7200B FYAngular contact ball bearing |
| 5.35 kN | 2 kN | — | 22000 rpmLimiting Speeds(Grease Lub.): 22000 min-1Limiting Speeds(Oil Lub.): 29000 min-1 | 0.031 kg31 g |
| KOYO7200CAngular contact ball bearing |
| 7.25 kN | 2.95 kN | — | 32000 rpmLimiting Speeds(Grease Lub.): 32000 min-1Limiting Speeds(Oil Lub.): 43000 min-1 | 0.031 kg31 g |
| KOYO7200CDBAngular contact ball bearing |
| 11.8 kN | 5.85 kN | — | 25000 rpmLimiting Speeds(Grease Lub.): 25000 min-1Limiting Speeds(Oil Lub.): 34000 min-1 | 0.062 kg62 g |
| KOYO7200CDB FYAngular contact ball bearing |
| 10.2 kN | 4.7 kN | — | 32000 rpmLimiting Speeds(Grease Lub.): 32000 min-1Limiting Speeds(Oil Lub.): 43000 min-1 | 0.062 kg62 g |
| KOYO7200CDFAngular contact ball bearing |
| 11.8 kN | 5.85 kN | — | 25000 rpmLimiting Speeds(Grease Lub.): 25000 min-1Limiting Speeds(Oil Lub.): 34000 min-1 | 0.062 kg62 g |
| KOYO7200CDF FYAngular contact ball bearing |
| 10.2 kN | 4.7 kN | — | 32000 rpmLimiting Speeds(Grease Lub.): 32000 min-1Limiting Speeds(Oil Lub.): 43000 min-1 | 0.062 kg62 g |
| KOYO7200CDTAngular contact ball bearing |
| 11.8 kN | 5.85 kN | — | 25000 rpmLimiting Speeds(Grease Lub.): 25000 min-1Limiting Speeds(Oil Lub.): 34000 min-1 | 0.062 kg62 g |
| KOYO7200CDT FYAngular contact ball bearing |
| 10.2 kN | 4.7 kN | — | 32000 rpmLimiting Speeds(Grease Lub.): 32000 min-1Limiting Speeds(Oil Lub.): 43000 min-1 | 0.062 kg62 g |
| KOYO7200C FYAngular contact ball bearing |
| 6.25 kN | 2.35 kN | — | 40000 rpmLimiting Speeds(Grease Lub.): 40000 min-1Limiting Speeds(Oil Lub.): 54000 min-1 | 0.031 kg31 g |
| KOYO7200DBAngular contact ball bearing |
| 11 kN | 5.45 kN | — | 18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 23000 min-1 | 0.062 kg62 g |
| KOYO7200DB FYAngular contact ball bearing |
| 9.5 kN | 4.4 kN | — | 23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1Limiting Speeds(Oil Lub.): 29000 min-1 | 0.062 kg62 g |
| KOYO7200DFAngular contact ball bearing |
| 11 kN | 5.45 kN | — | 18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 23000 min-1 | 0.062 kg62 g |
| KOYO7200DF FYAngular contact ball bearing |
| 9.5 kN | 4.4 kN | — | 23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1Limiting Speeds(Oil Lub.): 29000 min-1 | 0.062 kg62 g |
| KOYO7200DTAngular contact ball bearing |
| 11 kN | 5.45 kN | — | 18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 23000 min-1 | 0.062 kg62 g |
| KOYO7200DT FYAngular contact ball bearing |
| 9.5 kN | 4.4 kN | — | 23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1Limiting Speeds(Oil Lub.): 29000 min-1 | 0.062 kg62 g |
| KOYO7200 FYAngular contact ball bearing |
| 5.85 kN | 2.2 kN | — | 29000 rpmLimiting Speeds(Grease Lub.): 29000 min-1Limiting Speeds(Oil Lub.): 37000 min-1 | 0.031 kg31 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| KOYO 7200 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 7200 ACDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 ACDGB/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7200 ACDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 ACD/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7200 ACD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 ACD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 ACD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 ACD/P4ADT | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 BECBP | Without | P6 | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7200 BEGAP | Without | Not recorded | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7200 BEP | Without | Normal | Not recorded | Non-metallic | Bearing steel | None |
| SKF 7200 CDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 CDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 CD/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7200 CD/HCP4ADGB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7200 CD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 CD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 CD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7200 CD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| FAG 7200-B-XL-2RS-TVP | 2RS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 7200-B-XL-2RS-TVP-L212 | 2RS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | L212 — Grease (L212/customer specific) |
| FAG 7200-B-XL-2RS-TVP-UL | 2RS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 7200-B-XL-JP | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7200-B-XL-JP-UA | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7200-B-XL-JP-UO | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | JP — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 7200-B-XL-MP | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | MP — Solid brass cage, ball guided | Not recorded | Without — Bearing not greased |
| FAG 7200-B-XL-TVP | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7200-B-XL-TVP-UA | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7200-B-XL-TVP-UL | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 7200-B-XL-TVP-UO | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | Not recorded | TVP — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| NSK 7200AW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7200AWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7200AWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7200AWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7200BW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7200BWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7200BWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7200BWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 7200B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200BDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200BDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200BDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200C | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200CDB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200CDF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200CDT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200DB | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200DF | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200DT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7200 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
KOYO
7200
Angular contact ball bearing
View full technical record →SKF7200 ACDGA/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7200 ACDGB/HCP4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7200 ACDGB/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7200 ACD/HCP4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →SKF7200 ACD/P4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →SKF7200 ACD/P4ADGA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7200 ACD/P4ADGB
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7200 ACD/P4ADT
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →NSK7200AW
Angular contact ball bearing
View full technical record →NSK7200AWDB
Angular contact ball bearing
View full technical record →NSK7200AWDF
Angular contact ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.