Find · understand · compare
7020 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7020. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7020 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 108 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF7020 ACB/HCP4AQBCAMatched set of four super-precision, high-speed B design, single row angular contact ball bearings |
| 74.1 kN | 102 kN | — | — | 4.18 kg4180 g |
| SKF7020 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 79.3 kN | 80 kN | — | — | 1.03 kg1030 g |
| SKF7020 ACDGA/HCP4ALSuper-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 79.3 kN | 80 kN | — | — | 1.24 kg1240 g |
| SKF7020 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 79.3 kN | 80 kN | — | — | 1.24 kg1240 g |
| SKF7020 ACDGA/P4AH1Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 79.3 kN | 80 kN | — | — | 1.24 kg1240 g |
| SKF7020 ACDGA/P4ALSuper-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 79.3 kN | 80 kN | — | — | 1.24 kg1240 g |
| SKF7020 ACDGATP/P4BSuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 79.3 kN | 80 kN | — | — | 1.24 kg1240 g |
| SKF7020 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 79.3 kN | 80 kN | — | — | 1.03 kg1030 g |
| SKF7020 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 79.3 kN | 80 kN | — | — | 1.24 kg1240 g |
| SKF7020 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 79.3 kN | 80 kN | — | — | 1.24 kg1240 g |
| SKF7020 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 79.3 kN | 80 kN | — | — | 1.03 kg1030 g |
| SKF7020 ACD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.06 kg2060 g |
| SKF7020 ACD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.06 kg2060 g |
| SKF7020 ACD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.06 kg2060 g |
| SKF7020 ACD/HCP4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.06 kg2060 g |
| SKF7020 ACD/HCP4ALDGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.06 kg2060 g |
| SKF7020 ACD/HCP4ALQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 320 kN | — | — | 4.12 kg4120 g |
| SKF7020 ACD/HCP4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 320 kN | — | — | 4.12 kg4120 g |
| SKF7020 ACD/HCP4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 320 kN | — | — | 4.12 kg4120 g |
| SKF7020 ACD/HCP4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 172 kN | 240 kN | — | — | 3.09 kg3090 g |
| SKF7020 ACD/HCP4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 172 kN | 240 kN | — | — | 3.09 kg3090 g |
| SKF7020 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 79.3 kN | 80 kN | — | — | 1.24 kg1240 g |
| SKF7020 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.48 kg2480 g |
| SKF7020 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.48 kg2480 g |
| SKF7020 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.48 kg2480 g |
| SKF7020 ACD/P4ADFBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.48 kg2480 g |
| SKF7020 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.48 kg2480 g |
| SKF7020 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.48 kg2480 g |
| SKF7020 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.48 kg2480 g |
| SKF7020 ACD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 127 kN | 160 kN | — | — | 2.48 kg2480 g |
| SKF7020 ACD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 320 kN | — | — | 4.97 kg4970 g |
| SKF7020 ACD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 320 kN | — | — | 4.97 kg4970 g |
| SKF7020 ACD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 320 kN | — | — | 4.97 kg4970 g |
| SKF7020 ACD/P4AQBCDMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 320 kN | — | — | 4.97 kg4970 g |
| SKF7020 ACD/P4AQGAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 208 kN | 320 kN | — | — | 4.97 kg4970 g |
| SKF7020 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 172 kN | 240 kN | — | — | 3.73 kg3730 g |
| SKF7020 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 172 kN | 240 kN | — | — | 3.73 kg3730 g |
| SKF7020 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 172 kN | 240 kN | — | — | 3.73 kg3730 g |
| SKF7020 ACD/P4ATGAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 172 kN | 240 kN | — | — | 3.78 kg3780 g |
| SKF7020 ACD/P4ATGBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 172 kN | 240 kN | — | — | 3.73 kg3730 g |
| SKF7020 ACEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 42.3 kN | 38 kN | — | — | 1.13 kg1130 g |
| SKF7020 ACEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 42.3 kN | 38 kN | — | — | 1.13 kg1130 g |
| SKF7020 ACEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 42.3 kN | 38 kN | — | — | 1.13 kg1130 g |
| SKF7020 ACEGA/HCP4AL1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 42.3 kN | 38 kN | — | — | 1.13 kg1130 g |
| SKF7020 ACEGA/HCP4AL2Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 42.3 kN | 38 kN | — | — | 1.13 kg1130 g |
| SKF7020 ACEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 42.3 kN | 38 kN | — | — | 1.25 kg1250 g |
| SKF7020 ACEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 42.3 kN | 38 kN | — | — | 1.25 kg1250 g |
| SKF7020 ACE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 68.9 kN | 75 kN | — | — | 2.25 kg2250 g |
| SKF7020 ACE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 68.9 kN | 75 kN | — | — | 2.25 kg2250 g |
| SKF7020 ACE/HCP4AH1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 68.9 kN | 75 kN | — | — | 2.25 kg2250 g |
| SKF7020 ACE/HCP4AL1Super-precision, high-speed E design, single row angular contact ball bearing suitable for direct oil-air lubrication |
| 42.3 kN | 38 kN | — | — | 1.13 kg1130 g |
| SKF7020 ACE/HCP4AL1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 68.9 kN | 75 kN | — | — | 2.25 kg2250 g |
| SKF7020 ACE/P4ASuper-precision, high-speed E design, single row angular contact ball bearing |
| 42.3 kN | 38 kN | — | — | 1.25 kg1250 g |
| SKF7020 ACE/P4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 68.9 kN | 75 kN | — | — | 2.51 kg2510 g |
| SKF7020 ACE/P4AQBTAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings |
| 112 kN | 150 kN | — | — | 5.2 kg5200 g |
| SKF7020 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 83.2 kN | 85 kN | — | — | 1.03 kg1030 g |
| SKF7020 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 83.2 kN | 85 kN | — | — | 1.24 kg1240 g |
| SKF7020 CDGATP/P4BSuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 83.2 kN | 85 kN | — | — | 1.24 kg1240 g |
| SKF7020 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 83.2 kN | 85 kN | — | — | 1.24 kg1240 g |
| SKF7020 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 83.2 kN | 85 kN | — | — | 1.24 kg1240 g |
| SKF7020 CD/HCP4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.06 kg2060 g |
| SKF7020 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.06 kg2060 g |
| SKF7020 CD/HCP4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 221 kN | 340 kN | — | — | 4.12 kg4120 g |
| SKF7020 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 83.2 kN | 85 kN | — | — | 1.24 kg1240 g |
| SKF7020 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.48 kg2480 g |
| SKF7020 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.48 kg2480 g |
| SKF7020 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.48 kg2480 g |
| SKF7020 CD/P4ADBDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.48 kg2480 g |
| SKF7020 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.48 kg2480 g |
| SKF7020 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.48 kg2480 g |
| SKF7020 CD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.48 kg2480 g |
| SKF7020 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 135 kN | 170 kN | — | — | 2.48 kg2480 g |
| SKF7020 CD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 221 kN | 340 kN | — | — | 4.97 kg4970 g |
| SKF7020 CD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 221 kN | 340 kN | — | — | 4.97 kg4970 g |
| SKF7020 CD/P4AQGCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 221 kN | 340 kN | — | — | 4.97 kg4970 g |
| SKF7020 CD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 178 kN | 255 kN | — | — | 3.73 kg3730 g |
| SKF7020 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 178 kN | 255 kN | — | — | 3.73 kg3730 g |
| SKF7020 CD/P4ATGAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 178 kN | 255 kN | — | — | 3.73 kg3730 g |
| SKF7020 CEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 44.9 kN | 40 kN | — | — | 1.13 kg1130 g |
| SKF7020 CEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 44.9 kN | 40 kN | — | — | 1.17 kg1170 g |
| SKF7020 CEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 44.9 kN | 40 kN | — | — | 1.25 kg1250 g |
| SKF7020 CEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 44.9 kN | 40 kN | — | — | 1.25 kg1250 g |
| SKF7020 CE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing |
| 44.9 kN | 40 kN | — | — | 1.13 kg1130 g |
| SKF7020 CE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 72.8 kN | 80 kN | — | — | 2.25 kg2250 g |
| SKF7020 CE/HCP4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings |
| 119 kN | 160 kN | — | — | 4.51 kg4510 g |
| SKF7020 CE/P4ASuper-precision, high-speed E design, single row angular contact ball bearing |
| 44.9 kN | 40 kN | — | — | 1.25 kg1250 g |
| SKF7020 CE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 72.8 kN | 80 kN | — | — | 2.51 kg2510 g |
| SKF7020 FEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 44.2 kN | 39 kN | — | — | 1.17 kg1170 g |
| SKF7020 FEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 44.2 kN | 39 kN | — | — | 1.25 kg1250 g |
| SKF7020 FE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 72.8 kN | 78 kN | — | — | 2.25 kg2250 g |
| SKF7020 FE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 72.8 kN | 78 kN | — | — | 2.25 kg2250 g |
| SKF7020 FE/HCP4ALQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings |
| 117 kN | 156 kN | — | — | 4.51 kg4510 g |
| NSK7020AAngular contact ball bearing |
| 75 kN | 70.5 kN | — | — | 1.48 kg1480 g |
| NSK7020ADBAngular contact ball bearing |
| 122 kN | 141 kN | — | — | — |
| NSK7020ADFAngular contact ball bearing |
| 122 kN | 141 kN | — | — | — |
| NSK7020ADTAngular contact ball bearing |
| 122 kN | 141 kN | — | — | — |
| KOYO7020BDB FYAngular contact ball bearing |
| 124 kN | 127 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3800 min-1 | 2.74 kg2740 g |
| KOYO7020BDF FYAngular contact ball bearing |
| 124 kN | 127 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3800 min-1 | 2.74 kg2740 g |
| KOYO7020BDT FYAngular contact ball bearing |
| 124 kN | 127 kN | — | 2800 rpmLimiting Speeds(Grease Lub.): 2800 min-1Limiting Speeds(Oil Lub.): 3800 min-1 | 2.74 kg2740 g |
| KOYO7020B FYAngular contact ball bearing |
| 76.5 kN | 63.6 kN | — | 3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 1.37 kg1370 g |
| KOYO7020CDB FYAngular contact ball bearing |
| 153 kN | 154 kN | — | 5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6900 min-1 | 2.74 kg2740 g |
| KOYO7020CDF FYAngular contact ball bearing |
| 153 kN | 154 kN | — | 5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6900 min-1 | 2.74 kg2740 g |
| KOYO7020CDT FYAngular contact ball bearing |
| 153 kN | 154 kN | — | 5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6900 min-1 | 2.74 kg2740 g |
| KOYO7020C FYAngular contact ball bearing |
| 94.2 kN | 77.2 kN | — | 6500 rpmLimiting Speeds(Grease Lub.): 6500 min-1Limiting Speeds(Oil Lub.): 8600 min-1 | 1.37 kg1370 g |
| KOYO7020DB FYAngular contact ball bearing |
| 139 kN | 141 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 2.74 kg2740 g |
| KOYO7020DF FYAngular contact ball bearing |
| 139 kN | 141 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 2.74 kg2740 g |
| KOYO7020DT FYAngular contact ball bearing |
| 139 kN | 141 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 4700 min-1 | 2.74 kg2740 g |
| KOYO7020 FYAngular contact ball bearing |
| 85.5 kN | 70.6 kN | — | 4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 5900 min-1 | 1.37 kg1370 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 7020 ACB/HCP4AQBCA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACDGA/HCP4AL | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACDGA/P4AH1 | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACDGA/P4AL | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACDGATP/P4B | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACDGB/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4ADBA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4ADGB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4ADGC | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4ALDGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4ALQBCC | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4AQBCA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4AQBCB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4ATBTA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/HCP4ATBTB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ADBC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ADFB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ADGC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ADGD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4AQBCA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4AQBCB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4AQBCC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4AQBCD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4AQGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ATBTA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ATBTB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ATBTC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ATGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACD/P4ATGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACEGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACEGA/HCP4AH1 | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACEGA/HCP4AL | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACEGA/HCP4AL1 | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACEGA/HCP4AL2 | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACEGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACEGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACE/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACE/HCP4ADT | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACE/HCP4AH1DT | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACE/HCP4AL1 | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACE/HCP4AL1DT | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 ACE/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACE/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 ACE/P4AQBTA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CDGATP/P4B | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/HCP4ADBB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CD/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CD/HCP4AQBCA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ADBC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ADBD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ADGD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ADT | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4AQBCA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4AQBCC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4AQGC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ATBTA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ATBTB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CD/P4ATGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CEGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CEGA/HCP4AL | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CEGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CEGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CE/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CE/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CE/HCP4AQBCA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 CE/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 CE/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 FEGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 FEGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7020 FE/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 FE/HCP4ADT | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7020 FE/HCP4ALQBCA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| NSK 7020A | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7020ADB | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7020ADF | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| NSK 7020ADT | Not recorded | Not recorded | Not recorded | Machined brass, inner-ring guided | Not recorded | Not recorded |
| KOYO 7020BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7020 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
NSK
7020A
Angular contact ball bearing
View full technical record →SKF7020 ACB/HCP4AQBCA
Matched set of four super-precision, high-speed B design, single row angular contact ball bearings
View full technical record →SKF7020 ACDGA/HCP4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7020 ACDGA/HCP4AL
Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
View full technical record →SKF7020 ACDGA/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7020 ACDGA/P4AH1
Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
View full technical record →SKF7020 ACDGA/P4AL
Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
View full technical record →SKF7020 ACDGATP/P4B
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7020 ACDGB/HCP4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7020 ACDGB/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7020 ACDGC/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7020 ACD/HCP4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.