Find · understand · compare
7015 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7015. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7015 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 73 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF7015 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 49.4 kN | 46.5 kN | — | — | 0.519 kg519 g |
| SKF7015 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 49.4 kN | 46.5 kN | — | — | 0.617 kg617 g |
| SKF7015 ACDGAT/P4BSuper-precision angular contact ball bearing, universally matchable |
| — | — | — | — | 0.617 kg617 g |
| SKF7015 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 49.4 kN | 46.5 kN | — | — | 0.617 kg617 g |
| SKF7015 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 49.4 kN | 46.5 kN | — | — | 0.617 kg617 g |
| SKF7015 ACD/HCP4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.04 kg1040 g |
| SKF7015 ACD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.04 kg1040 g |
| SKF7015 ACD/HCP4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 108 kN | 140 kN | — | — | 1.56 kg1560 g |
| SKF7015 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 49.4 kN | 46.5 kN | — | — | 0.617 kg617 g |
| SKF7015 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.23 kg1230 g |
| SKF7015 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.23 kg1230 g |
| SKF7015 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.23 kg1230 g |
| SKF7015 ACD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.23 kg1230 g |
| SKF7015 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.23 kg1230 g |
| SKF7015 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.23 kg1230 g |
| SKF7015 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.23 kg1230 g |
| SKF7015 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 80.6 kN | 93 kN | — | — | 1.04 kg1040 g |
| SKF7015 ACD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings |
| 133 kN | 186 kN | — | — | 2.47 kg2470 g |
| SKF7015 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 108 kN | 140 kN | — | — | 1.85 kg1850 g |
| SKF7015 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 108 kN | 140 kN | — | — | 1.85 kg1850 g |
| SKF7015 ACEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 24.7 kN | 20.4 kN | — | — | 0.594 kg594 g |
| SKF7015 ACEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication |
| 24.7 kN | 20.4 kN | — | — | 0.608 kg608 g |
| SKF7015 ACEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 24.7 kN | 20.4 kN | — | — | 0.644 kg644 g |
| SKF7015 ACEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 24.7 kN | 20.4 kN | — | — | 0.644 kg644 g |
| SKF7015 ACE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 40.3 kN | 41.5 kN | — | — | 1.29 kg1290 g |
| SKF7015 ACE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 40.3 kN | 41.5 kN | — | — | 1.18 kg1180 g |
| SKF7015 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 52.7 kN | 49 kN | — | — | 0.519 kg519 g |
| SKF7015 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 52.7 kN | 49 kN | — | — | 0.617 kg617 g |
| SKF7015 CDGAT/P4BSuper-precision angular contact ball bearing, universally matchable |
| — | — | — | — | 0.617 kg617 g |
| SKF7015 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 52.7 kN | 49 kN | — | — | 0.617 kg617 g |
| SKF7015 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 52.7 kN | 49 kN | — | — | 0.617 kg617 g |
| SKF7015 CD/HCP4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.05 kg1050 g |
| SKF7015 CD/HCP4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 114 kN | 146 kN | — | — | 1.56 kg1560 g |
| SKF7015 CD/HCP4ATGAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 114 kN | 146 kN | — | — | 1.56 kg1560 g |
| SKF7015 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 52.7 kN | 49 kN | — | — | 0.617 kg617 g |
| SKF7015 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.23 kg1230 g |
| SKF7015 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.23 kg1230 g |
| SKF7015 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.23 kg1230 g |
| SKF7015 CD/P4ADBDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.23 kg1230 g |
| SKF7015 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.23 kg1230 g |
| SKF7015 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.23 kg1230 g |
| SKF7015 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.23 kg1230 g |
| SKF7015 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 85.2 kN | 98 kN | — | — | 1.23 kg1230 g |
| SKF7015 CD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 114 kN | 146 kN | — | — | 1.85 kg1850 g |
| SKF7015 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 114 kN | 146 kN | — | — | 1.85 kg1850 g |
| SKF7015 CD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings |
| 114 kN | 146 kN | — | — | 1.86 kg1860 g |
| SKF7015 CEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 26 kN | 21.6 kN | — | — | 0.589 kg589 g |
| SKF7015 CEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 26 kN | 21.6 kN | — | — | 0.643 kg643 g |
| SKF7015 CE/HCP4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 42.3 kN | 43 kN | — | — | 1.18 kg1180 g |
| SKF7015 CE/HCP4ADBBMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 42.3 kN | 43 kN | — | — | 1.18 kg1180 g |
| SKF7015 CE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 42.3 kN | 43 kN | — | — | 1.18 kg1180 g |
| SKF7015 CE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 42.3 kN | 43 kN | — | — | 1.18 kg1180 g |
| SKF7015 CE/HCP4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings |
| 68.9 kN | 86.5 kN | — | — | 2.36 kg2360 g |
| SKF7015 CE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 42.3 kN | 43 kN | — | — | 1.29 kg1290 g |
| SKF7015 CE/P4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings |
| 68.9 kN | 86.5 kN | — | — | 2.58 kg2580 g |
| SKF7015 CE/P4ATBTBMatched set of three super-precision, high-speed E design, single row angular contact ball bearings |
| 55.9 kN | 65.5 kN | — | — | 1.99 kg1990 g |
| SKF7015 FEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 26 kN | 21.2 kN | — | — | 0.644 kg644 g |
| NSK7015AWAngular contact ball bearing |
| 49.5 kN | 43.5 kN | — | — | 0.661 kg661 g |
| NSK7015AWDBAngular contact ball bearing |
| 80.5 kN | 87.5 kN | — | — | — |
| NSK7015AWDFAngular contact ball bearing |
| 80.5 kN | 87.5 kN | — | — | — |
| NSK7015AWDTAngular contact ball bearing |
| 80.5 kN | 87.5 kN | — | — | — |
| KOYO7015BDB FYAngular contact ball bearing |
| 79.3 kN | 75.2 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.38 kg1380 g |
| KOYO7015BDF FYAngular contact ball bearing |
| 79.3 kN | 75.2 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.38 kg1380 g |
| KOYO7015BDT FYAngular contact ball bearing |
| 79.3 kN | 75.2 kN | — | 3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.38 kg1380 g |
| KOYO7015B FYAngular contact ball bearing |
| 48.8 kN | 37.6 kN | — | 4700 rpmLimiting Speeds(Grease Lub.): 4700 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 0.69 kg690 g |
| KOYO7015CDB FYAngular contact ball bearing |
| 97.6 kN | 91.3 kN | — | 6900 rpmLimiting Speeds(Grease Lub.): 6900 min-1Limiting Speeds(Oil Lub.): 9200 min-1 | 1.38 kg1380 g |
| KOYO7015CDF FYAngular contact ball bearing |
| 97.6 kN | 91.3 kN | — | 6900 rpmLimiting Speeds(Grease Lub.): 6900 min-1Limiting Speeds(Oil Lub.): 9200 min-1 | 1.38 kg1380 g |
| KOYO7015CDT FYAngular contact ball bearing |
| 97.6 kN | 91.3 kN | — | 6900 rpmLimiting Speeds(Grease Lub.): 6900 min-1Limiting Speeds(Oil Lub.): 9200 min-1 | 1.38 kg1380 g |
| KOYO7015C FYAngular contact ball bearing |
| 60.1 kN | 45.6 kN | — | 8700 rpmLimiting Speeds(Grease Lub.): 8700 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.69 kg690 g |
| KOYO7015DB FYAngular contact ball bearing |
| 88.6 kN | 83.4 kN | — | 5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 1.38 kg1380 g |
| KOYO7015DF FYAngular contact ball bearing |
| 88.6 kN | 83.4 kN | — | 5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 1.38 kg1380 g |
| KOYO7015DT FYAngular contact ball bearing |
| 88.6 kN | 83.4 kN | — | 5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6300 min-1 | 1.38 kg1380 g |
| KOYO7015 FYAngular contact ball bearing |
| 54.6 kN | 41.7 kN | — | 6300 rpmLimiting Speeds(Grease Lub.): 6300 min-1Limiting Speeds(Oil Lub.): 7800 min-1 | 0.69 kg690 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 7015 ACDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 ACDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACDGAT/P4B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 7015 ACDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/HCP4ADBB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 ACD/HCP4ADGB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 ACD/HCP4ATBTB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 ACD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ADBC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ADFA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ADGC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ADT | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4AQBCB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ATBTA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACD/P4ATBTB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACEGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 ACEGA/HCP4AL | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 ACEGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACEGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 ACE/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 ACE/HCP4ADT | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CDGAT/P4B | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 7015 CDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/HCP4ADT | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CD/HCP4ATBTA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CD/HCP4ATGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ADBC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ADBD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ADGC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ADT | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ATBTA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ATBTB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CD/P4ATBTC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CEGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CEGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CE/HCP4ADBA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CE/HCP4ADBB | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CE/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CE/HCP4ADT | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CE/HCP4AQBCA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7015 CE/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CE/P4AQBCA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 CE/P4ATBTB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7015 FEGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| NSK 7015AW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7015AWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7015AWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7015AWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 7015BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7015 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
7015 ACDGA/HCP4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7015 ACDGA/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7015 ACDGAT/P4B
Super-precision angular contact ball bearing, universally matchable
View full technical record →SKF7015 ACDGB/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7015 ACDGC/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7015 ACD/HCP4ADBB
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7015 ACD/HCP4ADGB
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7015 ACD/HCP4ATBTB
Matched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7015 ACD/P4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →SKF7015 ACD/P4ADBA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7015 ACD/P4ADBB
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7015 ACD/P4ADBC
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.