99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7014 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7014. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7014 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 130 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF7014 ACBGA/HCP4ASuper-precision, high-speed B design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
18.2 kN15.6 kN——0.62 kg620 g
SKF7014 ACB/HCP4ADGAMatched set of two super-precision, high-speed B design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
29.6 kN31 kN——1.19 kg1190 g
SKF7014 ACB/HCP4ADTMatched set of two super-precision, high-speed B design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
29.6 kN31 kN——1.19 kg1190 g
SKF7014 ACB/HCP4ATGAMatched set of three super-precision, high-speed B design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
39 kN46.5 kN——1.82 kg1820 g
SKF7014 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.492 kg492 g
SKF7014 ACDGA/HCP4ALSuper-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.492 kg492 g
SKF7014 ACDGA/HCP4AL2Hybrid super-precision angular contact ball bearing, universally matchable
Recorded bore (d)
—
Recorded outside dimension (D)
—
Catalogue width (symbol unverified)
—
————0.492 kg492 g
SKF7014 ACDGA/HCP4ALAHybrid super-precision angular contact ball bearing, universally matchable
Recorded bore (d)
—
Recorded outside dimension (D)
—
Catalogue width (symbol unverified)
—
————0.492 kg492 g
SKF7014 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.585 kg585 g
SKF7014 ACDGA/P4ALSuper-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.585 kg585 g
SKF7014 ACDGATP/P4BSuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.586 kg586 g
SKF7014 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.492 kg492 g
SKF7014 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.585 kg585 g
SKF7014 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.585 kg585 g
SKF7014 ACD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——0.984 kg984 g
SKF7014 ACD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——0.984 kg984 g
SKF7014 ACD/HCP4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——0.984 kg984 g
SKF7014 ACD/HCP4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
127 kN173 kN——1.97 kg1970 g
SKF7014 ACD/HCP4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
106 kN132 kN——1.48 kg1480 g
SKF7014 ACD/HCP4ATTMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
106 kN132 kN——1.48 kg1480 g
SKF7014 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
48.8 kN44 kN——0.585 kg585 g
SKF7014 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——1.17 kg1170 g
SKF7014 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——1.17 kg1170 g
SKF7014 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——1.17 kg1170 g
SKF7014 ACD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——1.17 kg1170 g
SKF7014 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——1.17 kg1170 g
SKF7014 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——1.17 kg1170 g
SKF7014 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——1.17 kg1170 g
SKF7014 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
79.3 kN86.5 kN——1.17 kg1170 g
SKF7014 ACD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
127 kN173 kN——2.34 kg2340 g
SKF7014 ACD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
127 kN173 kN——2.34 kg2340 g
SKF7014 ACD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
127 kN173 kN——2.34 kg2340 g
SKF7014 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
106 kN132 kN——1.75 kg1750 g
SKF7014 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
106 kN132 kN——1.75 kg1750 g
SKF7014 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
106 kN132 kN——1.75 kg1750 g
SKF7014 ACEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.577 kg577 g
SKF7014 ACEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.559 kg559 g
SKF7014 ACEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.559 kg559 g
SKF7014 ACEGA/HCP4AL1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.559 kg559 g
SKF7014 ACEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.612 kg612 g
SKF7014 ACEGB/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.56 kg560 g
SKF7014 ACEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.612 kg612 g
SKF7014 ACE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.56 kg560 g
SKF7014 ACE/HCP4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.12 kg1120 g
SKF7014 ACE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.12 kg1120 g
SKF7014 ACE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.12 kg1120 g
SKF7014 ACE/HCP4AH1DBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.22 kg1220 g
SKF7014 ACE/HCP4AH1DGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.22 kg1220 g
SKF7014 ACE/HCP4AH1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.12 kg1120 g
SKF7014 ACE/HCP4AL1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.12 kg1120 g
SKF7014 ACE/HCP4ALDGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.12 kg1120 g
SKF7014 ACE/HCP4ALDTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.12 kg1120 g
SKF7014 ACE/HCP4ALQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
59.2 kN69.5 kN——2.24 kg2240 g
SKF7014 ACE/P4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
22.5 kN17.3 kN——0.608 kg608 g
SKF7014 ACE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
36.4 kN34.5 kN——1.22 kg1220 g
SKF7014 ACE/P4ATGAMatched set of three super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
48.8 kN52 kN——1.84 kg1840 g
SKF7014 CBGA/HCP4ASuper-precision, high-speed B design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
19 kN16.3 kN——0.62 kg620 g
SKF7014 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.492 kg492 g
SKF7014 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.585 kg585 g
SKF7014 CDGATP/P4BSuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.585 kg585 g
SKF7014 CDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.492 kg492 g
SKF7014 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.585 kg585 g
SKF7014 CDGC/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.585 kg585 g
SKF7014 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.585 kg585 g
SKF7014 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.492 kg492 g
SKF7014 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——0.984 kg984 g
SKF7014 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——0.984 kg984 g
SKF7014 CD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——0.984 kg984 g
SKF7014 CD/HCP4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——0.984 kg984 g
SKF7014 CD/HCP4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
135 kN183 kN——1.97 kg1970 g
SKF7014 CD/HCP4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
135 kN183 kN——1.97 kg1970 g
SKF7014 CD/HCP4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
111 kN137 kN——1.48 kg1480 g
SKF7014 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
52 kN45.5 kN——0.585 kg585 g
SKF7014 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——1.17 kg1170 g
SKF7014 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——1.17 kg1170 g
SKF7014 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——1.17 kg1170 g
SKF7014 CD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——1.17 kg1170 g
SKF7014 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——1.17 kg1170 g
SKF7014 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——1.17 kg1170 g
SKF7014 CD/P4ADGBGMG6Super-precision angular contact ball bearing, universally matchable
Recorded bore (d)
—
Recorded outside dimension (D)
—
Catalogue width (symbol unverified)
—
————1.19 kg1190 g
SKF7014 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——1.17 kg1170 g
SKF7014 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
83.2 kN91.5 kN——1.17 kg1170 g
SKF7014 CD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
135 kN183 kN——2.34 kg2340 g
SKF7014 CD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
135 kN183 kN——2.34 kg2340 g
SKF7014 CD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
111 kN137 kN——1.75 kg1750 g
SKF7014 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
60 mm
2.362205 in
111 kN137 kN——1.75 kg1750 g
SKF7014 CEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.8 kN18.3 kN——0.577 kg577 g
SKF7014 CEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.8 kN18.3 kN——0.56 kg560 g
SKF7014 CEGA/HCP4AL1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.8 kN18.3 kN——0.56 kg560 g
SKF7014 CEGA/HCVQ126Super-precision, high-speed E design, universally matchable single row angular contact ball bearing
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
20 mm
0.787402 in
23.8 kN18.3 kN——0.559 kg559 g
SKF7014 CEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.8 kN18.3 kN——0.608 kg608 g
SKF7014 CEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.8 kN18.3 kN——0.608 kg608 g
SKF7014 CE/HCP4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.12 kg1120 g
SKF7014 CE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.12 kg1120 g
SKF7014 CE/HCP4ADGBMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.12 kg1120 g
SKF7014 CE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.12 kg1120 g
SKF7014 CE/HCP4AH1DGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.12 kg1120 g
SKF7014 CE/HCP4AL1DGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.12 kg1120 g
SKF7014 CE/HCP4ALDGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.12 kg1120 g
SKF7014 CE/HCP4ALDTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.12 kg1120 g
SKF7014 CE/HCP4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
80 mm
3.149606 in
62.4 kN73.5 kN——2.24 kg2240 g
SKF7014 CE/P4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.8 kN18.3 kN——0.608 kg608 g
SKF7014 CE/P4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.22 kg1220 g
SKF7014 CE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.22 kg1220 g
SKF7014 CE/P4ADGBMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.22 kg1220 g
SKF7014 CE/P4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
39 kN36.5 kN——1.22 kg1220 g
SKF7014 CE/P4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
62.4 kN73.5 kN——2.45 kg2450 g
SKF7014 FEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.4 kN18.3 kN——0.559 kg559 g
SKF7014 FEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.4 kN18.3 kN——0.559 kg559 g
SKF7014 FEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.4 kN18.3 kN——0.559 kg559 g
SKF7014 FEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
23.4 kN18.3 kN——0.612 kg612 g
SKF7014 FE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
37.7 kN36.5 kN——1.12 kg1120 g
SKF7014 FE/HCP4ALQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
80 mm
3.149606 in
62.4 kN72 kN——2.24 kg2240 g
SKF7014 FE/P4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
37.7 kN36.5 kN——1.22 kg1220 g
NSK7014AWAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Individual bearing width (B)
20 mm
0.787402 in
48.5 kN41.5 kN——0.625 kg625 g
NSK7014AWDBAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
79 kN82.5 kN———
NSK7014AWDFAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
79 kN82.5 kN———
NSK7014AWDTAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
40 mm
1.574803 in
79 kN82.5 kN———
KOYO7014BDB FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
77.7 kN71.1 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5300 min-11.32 kg1320 g
KOYO7014BDF FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
77.7 kN71.1 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5300 min-11.32 kg1320 g
KOYO7014BDT FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
77.7 kN71.1 kN—4000 rpmLimiting Speeds(Grease Lub.): 4000 min-1Limiting Speeds(Oil Lub.): 5300 min-11.32 kg1320 g
KOYO7014B FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
47.8 kN35.5 kN—5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6600 min-10.66 kg660 g
KOYO7014CDB FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
95.3 kN86 kN—7300 rpmLimiting Speeds(Grease Lub.): 7300 min-1Limiting Speeds(Oil Lub.): 9700 min-11.32 kg1320 g
KOYO7014CDF FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
95.3 kN86 kN—7300 rpmLimiting Speeds(Grease Lub.): 7300 min-1Limiting Speeds(Oil Lub.): 9700 min-11.32 kg1320 g
KOYO7014CDT FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
95.3 kN86 kN—7300 rpmLimiting Speeds(Grease Lub.): 7300 min-1Limiting Speeds(Oil Lub.): 9700 min-11.32 kg1320 g
KOYO7014C FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
58.6 kN43 kN—9200 rpmLimiting Speeds(Grease Lub.): 9200 min-1Limiting Speeds(Oil Lub.): 12000 min-10.66 kg660 g
KOYO7014DB FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
86.7 kN78.7 kN—5300 rpmLimiting Speeds(Grease Lub.): 5300 min-1Limiting Speeds(Oil Lub.): 6600 min-11.32 kg1320 g
KOYO7014DF FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
86.7 kN78.7 kN—5300 rpmLimiting Speeds(Grease Lub.): 5300 min-1Limiting Speeds(Oil Lub.): 6600 min-11.32 kg1320 g
KOYO7014DT FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
40 mm
1.574803 in
86.7 kN78.7 kN—5300 rpmLimiting Speeds(Grease Lub.): 5300 min-1Limiting Speeds(Oil Lub.): 6600 min-11.32 kg1320 g
KOYO7014 FYAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
20 mm
0.787402 in
53.3 kN39.4 kN—6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8300 min-10.66 kg660 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 7014 ACBGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACB/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACB/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACB/HCP4ATGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACDGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACDGA/HCP4AL2Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7014 ACDGA/HCP4ALANot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7014 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACDGA/P4ALWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACDGATP/P4BWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACD/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACD/HCP4AQBCBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACD/HCP4ATBTAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACD/HCP4ATTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4AQBCBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4AQBCCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACEGA/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACEGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACEGA/HCP4AL1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACEGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACEGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACE/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4AH1DBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4AH1DGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4AH1DTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4AL1DTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4ALDGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4ALDTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/HCP4ALQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 ACE/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 ACE/P4ATGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CBGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CDGATP/P4BWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CDGC/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CD/HCP4ADGCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CD/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CD/HCP4AQBCCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CD/HCP4ATBTAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ADGBGMG6Not recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7014 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4AQBCBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CEGA/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CEGA/HCP4AL1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CEGA/HCVQ126WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CEGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CE/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/HCP4AH1DGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/HCP4AL1DGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/HCP4ALDGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/HCP4ALDTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 CE/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CE/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CE/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CE/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 CE/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 FEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 FEGA/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 FEGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 FEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7014 FE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 FE/HCP4ALQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7014 FE/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
NSK 7014AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7014AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7014AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7014AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7014BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7014 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

7014 ACBGA/HCP4A

Super-precision, high-speed B design, universally matchable single row angular contact ball bearing

View full technical record →SKF

7014 ACB/HCP4ADGA

Matched set of two super-precision, high-speed B design, single row angular contact ball bearings

View full technical record →SKF

7014 ACB/HCP4ADT

Matched set of two super-precision, high-speed B design, single row angular contact ball bearings

View full technical record →SKF

7014 ACB/HCP4ATGA

Matched set of three super-precision, high-speed B design, single row angular contact ball bearings

View full technical record →SKF

7014 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7014 ACDGA/HCP4AL

Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication

View full technical record →SKF

7014 ACDGA/HCP4AL2

Hybrid super-precision angular contact ball bearing, universally matchable

View full technical record →SKF

7014 ACDGA/HCP4ALA

Hybrid super-precision angular contact ball bearing, universally matchable

View full technical record →SKF

7014 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7014 ACDGA/P4AL

Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication

View full technical record →SKF

7014 ACDGATP/P4B

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7014 ACDGB/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →
Filter all 130 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search