99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7012 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7012. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7012 dimensions and recorded technical data

The recorded 7012 base designation measures 60×95×18 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NTN. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 108 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
NTN7012Angular contact ball bearing
Internal diameter (d)
60 mm
2.362205 in
External diameter (D)
95 mm
3.740157 in
Bearing/Inner ring width (B)
18 mm
0.708661 in
35.5 kN28.1 kN——0.478 kg478 g
SKF7012 ACBGA/HCP4ASuper-precision, high-speed B design, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
13.5 kN11.4 kN——0.419 kg419 g
SKF7012 ACBGA/HCP4ALSuper-precision, high-speed B design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
13.5 kN11.4 kN——0.419 kg419 g
SKF7012 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.333 kg333 g
SKF7012 ACDGA/HCP4ALSuper-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.333 kg333 g
SKF7012 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.395 kg395 g
SKF7012 ACDGATP/P4BSuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.395 kg395 g
SKF7012 ACDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.333 kg333 g
SKF7012 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.395 kg395 g
SKF7012 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.395 kg395 g
SKF7012 ACD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.333 kg333 g
SKF7012 ACD/HCP4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.67 kg670 g
SKF7012 ACD/HCP4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.667 kg667 g
SKF7012 ACD/HCP4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
101 kN132 kN——1.33 kg1330 g
SKF7012 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39 kN33.5 kN——0.395 kg395 g
SKF7012 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.791 kg791 g
SKF7012 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.791 kg791 g
SKF7012 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.791 kg791 g
SKF7012 ACD/P4ADFCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.791 kg791 g
SKF7012 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.791 kg791 g
SKF7012 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.791 kg791 g
SKF7012 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
62.4 kN67 kN——0.791 kg791 g
SKF7012 ACD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
101 kN132 kN——1.58 kg1580 g
SKF7012 ACD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
101 kN132 kN——1.58 kg1580 g
SKF7012 ACD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
101 kN132 kN——1.58 kg1580 g
SKF7012 ACD/P4AQBCDMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
101 kN132 kN——1.58 kg1580 g
SKF7012 ACD/P4AQBTBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
101 kN132 kN——1.58 kg1580 g
SKF7012 ACD/P4AQGBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
101 kN132 kN——1.58 kg1580 g
SKF7012 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
54 mm
2.125984 in
83.2 kN100 kN——1.19 kg1190 g
SKF7012 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
54 mm
2.125984 in
83.2 kN100 kN——1.19 kg1190 g
SKF7012 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
54 mm
2.125984 in
83.2 kN100 kN——1.19 kg1190 g
SKF7012 ACD/P4ATGAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
54 mm
2.125984 in
83.2 kN100 kN——1.19 kg1190 g
SKF7012 ACEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.3 kN12.2 kN——0.387 kg387 g
SKF7012 ACEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.3 kN12.2 kN——0.386 kg386 g
SKF7012 ACEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.3 kN12.2 kN——0.386 kg386 g
SKF7012 ACEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.3 kN12.2 kN——0.416 kg416 g
SKF7012 ACE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.3 kN12.2 kN——0.387 kg387 g
SKF7012 ACE/HCP4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
26 kN24.5 kN——0.773 kg773 g
SKF7012 ACE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
26 kN24.5 kN——0.772 kg772 g
SKF7012 ACE/HCP4AH1DGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
26 kN24.5 kN——0.798 kg798 g
SKF7012 ACE/HCP4AH1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
26 kN24.5 kN——0.772 kg772 g
SKF7012 ACE/HCP4ALDGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
95 mm
3.740157 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
26 kN24.5 kN——0.798 kg798 g
SKF7012 ACE/P4ADBBMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
26 kN24.5 kN——0.833 kg833 g
SKF7012 ACE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
26 kN24.5 kN——0.833 kg833 g
SKF7012 CBGA/HCP4ASuper-precision, high-speed B design, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
14.6 kN12 kN——0.407 kg407 g
SKF7012 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
40.3 kN34.5 kN——0.333 kg333 g
SKF7012 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
40.3 kN34.5 kN——0.395 kg395 g
SKF7012 CDGATP/P4BSuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
40.3 kN34.5 kN——0.395 kg395 g
SKF7012 CDGB/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
95 mm
3.740157 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
40.3 kN34.5 kN——0.333 kg333 g
SKF7012 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
40.3 kN34.5 kN——0.395 kg395 g
SKF7012 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
40.3 kN34.5 kN——0.395 kg395 g
SKF7012 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
40.3 kN34.5 kN——0.333 kg333 g
SKF7012 CD/HCP4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.667 kg667 g
SKF7012 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.667 kg667 g
SKF7012 CD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.667 kg667 g
SKF7012 CD/HCP4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.667 kg667 g
SKF7012 CD/HCP4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
106 kN140 kN——1.33 kg1330 g
SKF7012 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
40.3 kN34.5 kN——0.395 kg395 g
SKF7012 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.791 kg791 g
SKF7012 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.791 kg791 g
SKF7012 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.791 kg791 g
SKF7012 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.791 kg791 g
SKF7012 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.791 kg791 g
SKF7012 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.791 kg791 g
SKF7012 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
66.3 kN69.5 kN——0.791 kg791 g
SKF7012 CD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
106 kN140 kN——1.58 kg1580 g
SKF7012 CD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
54 mm
2.125984 in
87.1 kN104 kN——1.19 kg1190 g
SKF7012 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
54 mm
2.125984 in
87.1 kN104 kN——1.19 kg1190 g
SKF7012 CEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
17.2 kN12.9 kN——0.399 kg399 g
SKF7012 CEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
17.2 kN12.9 kN——0.387 kg387 g
SKF7012 CEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
17.2 kN12.9 kN——0.429 kg429 g
SKF7012 CE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
17.2 kN12.9 kN——0.387 kg387 g
SKF7012 CE/HCP4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.772 kg772 g
SKF7012 CE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.772 kg772 g
SKF7012 CE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.773 kg773 g
SKF7012 CE/HCP4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
44.9 kN51 kN——1.55 kg1550 g
SKF7012 CE/P4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.833 kg833 g
SKF7012 CE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.833 kg833 g
SKF7012 CE/P4ADGCMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.833 kg833 g
SKF7012 CE/P4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
72 mm
2.834646 in
44.9 kN51 kN——1.67 kg1670 g
SKF7012 CE/P4ATBTAMatched set of three super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
54 mm
2.125984 in
37.1 kN39 kN——1.25 kg1250 g
SKF7012 CE/P4ATGAMatched set of three super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
54 mm
2.125984 in
37.1 kN39 kN——1.25 kg1250 g
SKF7012 FEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.8 kN12.7 kN——0.386 kg386 g
SKF7012 FEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.8 kN12.7 kN——0.387 kg387 g
SKF7012 FEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.8 kN12.7 kN——0.416 kg416 g
SKF7012 FE/HCP4AH1Super-precision, high-speed E design, single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
16.8 kN12.7 kN——0.387 kg387 g
SKF7012 FE/HCP4AH1DGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.773 kg773 g
SKF7012 FE/HCP4AH1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.773 kg773 g
SKF7012 FE/HCP4AL1ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
95 mm
3.740157 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
27.6 kN25.5 kN——0.798 kg798 g
SKF7012 FE/HCP4AL2ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Recorded bore (d)
60 mm
2.362205 in
Recorded outside dimension (D)
95 mm
3.740157 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
27.6 kN25.5 kN——0.773 kg773 g
SKF7012 FE/HCP4ALDGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.773 kg773 g
SKF7012 FE/HCP4ALDTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
27.6 kN25.5 kN——0.773 kg773 g
NSK7012AWAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Individual bearing width (B)
18 mm
0.708661 in
36.5 kN29.5 kN——0.417 kg417 g
NSK7012AWDBAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
59 kN59 kN———
NSK7012AWDFAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
59 kN59 kN———
NSK7012AWDTAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
59 kN59 kN———
KOYO7012BDB FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
58.1 kN50.7 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 6200 min-10.9 kg900 g
KOYO7012BDF FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
58.1 kN50.7 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 6200 min-10.9 kg900 g
KOYO7012BDT FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
58.1 kN50.7 kN—4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1Limiting Speeds(Oil Lub.): 6200 min-10.9 kg900 g
KOYO7012B FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
35.7 kN25.3 kN—5800 rpmLimiting Speeds(Grease Lub.): 5800 min-1Limiting Speeds(Oil Lub.): 7700 min-10.45 kg450 g
KOYO7012CDB FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
71.2 kN61.3 kN—8500 rpmLimiting Speeds(Grease Lub.): 8500 min-1Limiting Speeds(Oil Lub.): 11000 min-10.9 kg900 g
KOYO7012CDF FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
71.2 kN61.3 kN—8500 rpmLimiting Speeds(Grease Lub.): 8500 min-1Limiting Speeds(Oil Lub.): 11000 min-10.9 kg900 g
KOYO7012CDT FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
71.2 kN61.3 kN—8500 rpmLimiting Speeds(Grease Lub.): 8500 min-1Limiting Speeds(Oil Lub.): 11000 min-10.9 kg900 g
KOYO7012C FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
43.8 kN30.6 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 14000 min-10.45 kg450 g
KOYO7012DB FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
64.8 kN56.1 kN—6200 rpmLimiting Speeds(Grease Lub.): 6200 min-1Limiting Speeds(Oil Lub.): 7700 min-10.9 kg900 g
KOYO7012DF FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
64.8 kN56.1 kN—6200 rpmLimiting Speeds(Grease Lub.): 6200 min-1Limiting Speeds(Oil Lub.): 7700 min-10.9 kg900 g
KOYO7012DT FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
36 mm
1.417323 in
64.8 kN56.1 kN—6200 rpmLimiting Speeds(Grease Lub.): 6200 min-1Limiting Speeds(Oil Lub.): 7700 min-10.9 kg900 g
KOYO7012 FYAngular contact ball bearing
Bore diameter (d)
60 mm
2.362205 in
Outside diameter (D)
95 mm
3.740157 in
Width (B)
18 mm
0.708661 in
39.9 kN28.1 kN—7700 rpmLimiting Speeds(Grease Lub.): 7700 min-1Limiting Speeds(Oil Lub.): 9700 min-10.45 kg450 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
NTN 7012Not recordedNot recordedCNpolyamide cage.Not recordedNot recorded
SKF 7012 ACBGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACBGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACDGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACDGATP/P4BWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACD/HCP4ADBBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACD/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACD/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ADFCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4AQBCBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4AQBCCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4AQBCDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4AQBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4AQGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACD/P4ATGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACEGA/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACEGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACE/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACE/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACE/HCP4AH1DGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACE/HCP4AH1DTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACE/HCP4ALDGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 ACE/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 ACE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CBGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CDGATP/P4BWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CDGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CD/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CD/HCP4ADGCWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CD/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CEGA/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CE/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CE/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CE/HCP4AQBCAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 CE/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CE/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CE/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CE/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 CE/P4ATGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 FEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 FEGA/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 FEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7012 FE/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 FE/HCP4AH1DGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 FE/HCP4AH1DTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 FE/HCP4AL1ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 FE/HCP4AL2ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 FE/HCP4ALDGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7012 FE/HCP4ALDTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
NSK 7012AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7012AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7012AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7012AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7012BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7012 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

NTN

7012

Angular contact ball bearing

View full technical record →SKF

7012 ACBGA/HCP4A

Super-precision, high-speed B design, universally matchable single row angular contact ball bearing

View full technical record →SKF

7012 ACBGA/HCP4AL

Super-precision, high-speed B design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication

View full technical record →SKF

7012 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7012 ACDGA/HCP4AL

Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication

View full technical record →SKF

7012 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7012 ACDGATP/P4B

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7012 ACDGB/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7012 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7012 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7012 ACD/HCP4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7012 ACD/HCP4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →
Filter all 108 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search