99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

7011 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 7011. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

7011 dimensions and recorded technical data

Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 99 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
SKF7011 ACBGA/HCP4ASuper-precision, high-speed B design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
13.3 kN10.4 kN——0.395 kg395 g
SKF7011 ACB/HCP4ADGAMatched set of two super-precision, high-speed B design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
21.2 kN20.8 kN——0.762 kg762 g
SKF7011 ACDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
37.1 kN31 kN——0.312 kg312 g
SKF7011 ACDGA/HCP4ALSuper-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
37.1 kN31 kN——0.312 kg312 g
SKF7011 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
37.1 kN31 kN——0.37 kg370 g
SKF7011 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
37.1 kN31 kN——0.37 kg370 g
SKF7011 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
37.1 kN31 kN——0.37 kg370 g
SKF7011 ACD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.623 kg623 g
SKF7011 ACD/HCP4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
54 mm
2.125984 in
80.6 kN93 kN——0.935 kg935 g
SKF7011 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
37.1 kN31 kN——0.37 kg370 g
SKF7011 ACD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.741 kg741 g
SKF7011 ACD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.741 kg741 g
SKF7011 ACD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.741 kg741 g
SKF7011 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.741 kg741 g
SKF7011 ACD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.741 kg741 g
SKF7011 ACD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.741 kg741 g
SKF7011 ACD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.741 kg741 g
SKF7011 ACD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
60.5 kN62 kN——0.741 kg741 g
SKF7011 ACD/P4AQBCBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
72 mm
2.834646 in
99.5 kN125 kN——1.48 kg1480 g
SKF7011 ACD/P4AQBCCMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
72 mm
2.834646 in
99.5 kN125 kN——1.48 kg1480 g
SKF7011 ACD/P4AQBTAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
72 mm
2.834646 in
99.5 kN125 kN——1.48 kg1480 g
SKF7011 ACD/P4AQBTBMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
72 mm
2.834646 in
99.5 kN125 kN——1.48 kg1480 g
SKF7011 ACD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
54 mm
2.125984 in
80.6 kN93 kN——1.11 kg1110 g
SKF7011 ACD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
54 mm
2.125984 in
80.6 kN93 kN——1.11 kg1110 g
SKF7011 ACD/P4ATBTCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
54 mm
2.125984 in
80.6 kN93 kN——1.11 kg1110 g
SKF7011 ACD/P4ATGCMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
54 mm
2.125984 in
80.6 kN93 kN——1.11 kg1110 g
SKF7011 ACEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
15.9 kN11.6 kN——0.362 kg362 g
SKF7011 ACEGA/HCP4AH1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
15.9 kN11.6 kN——0.362 kg362 g
SKF7011 ACEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
15.9 kN11.6 kN——0.362 kg362 g
SKF7011 ACEGA/HCP4AL1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
15.9 kN11.6 kN——0.362 kg362 g
SKF7011 ACEGA/HCP4AL2Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
15.9 kN11.6 kN——0.373 kg373 g
SKF7011 ACEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
15.9 kN11.6 kN——0.39 kg390 g
SKF7011 ACEGB/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
15.9 kN11.6 kN——0.362 kg362 g
SKF7011 ACE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
26 kN23.2 kN——0.725 kg725 g
SKF7011 ACE/HCP4ADGBMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
26 kN23.2 kN——0.725 kg725 g
SKF7011 ACE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
26 kN23.2 kN——0.725 kg725 g
SKF7011 ACE/HCP4AH1DBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
26 kN23.2 kN——0.725 kg725 g
SKF7011 ACE/HCP4AH1DGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
26 kN23.2 kN——0.725 kg725 g
SKF7011 ACE/HCP4AH1DTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
26 kN23.2 kN——0.725 kg725 g
SKF7011 ACE/HCP4ALDGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
26 kN23.2 kN——0.725 kg725 g
SKF7011 ACE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
26 kN23.2 kN——0.812 kg812 g
SKF7011 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
39.7 kN32.5 kN——0.312 kg312 g
SKF7011 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
39.7 kN32.5 kN——0.37 kg370 g
SKF7011 CDGAT/P4BSuper-precision angular contact ball bearing, universally matchable
Recorded bore (d)
—
Recorded outside dimension (D)
—
Catalogue width (symbol unverified)
—
————0.37 kg370 g
SKF7011 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
39.7 kN32.5 kN——0.37 kg370 g
SKF7011 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
39.7 kN32.5 kN——0.37 kg370 g
SKF7011 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
39.7 kN32.5 kN——0.312 kg312 g
SKF7011 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.623 kg623 g
SKF7011 CD/HCP4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.629 kg629 g
SKF7011 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
39.7 kN32.5 kN——0.37 kg370 g
SKF7011 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADBDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADFAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADFCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4ADTMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CD/P4AQBCAMatched set of four super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
72 mm
2.834646 in
104 kN129 kN——1.48 kg1480 g
SKF7011 CD/P4ATBTAMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
54 mm
2.125984 in
85.2 kN98 kN——1.11 kg1110 g
SKF7011 CD/P4ATBTBMatched set of three super-precision, high-capacity, D design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
54 mm
2.125984 in
85.2 kN98 kN——1.11 kg1110 g
SKF7011 CD/PA9ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
63.7 kN65.5 kN——0.741 kg741 g
SKF7011 CEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
16.8 kN12.2 kN——0.373 kg373 g
SKF7011 CEGA/HCP4AL1Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
16.8 kN12.2 kN——0.373 kg373 g
SKF7011 CEGA/HCP4AL2Super-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
16.8 kN12.2 kN——0.373 kg373 g
SKF7011 CEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
16.8 kN12.2 kN——0.402 kg402 g
SKF7011 CEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
16.8 kN12.2 kN——0.387 kg387 g
SKF7011 CE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
16.8 kN12.2 kN——0.36 kg360 g
SKF7011 CE/HCP4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27.6 kN24.5 kN——0.72 kg720 g
SKF7011 CE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27.6 kN24.5 kN——0.72 kg720 g
SKF7011 CE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27.6 kN24.5 kN——0.725 kg725 g
SKF7011 CE/HCP4ALDGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27.6 kN24.5 kN——0.746 kg746 g
SKF7011 CE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27.6 kN24.5 kN——0.779 kg779 g
SKF7011 CE/P4ADGCMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27.6 kN24.5 kN——0.779 kg779 g
SKF7011 CE/P4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27.6 kN24.5 kN——0.779 kg779 g
SKF7011 CE/P4AQBCAMatched set of four super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
72 mm
2.834646 in
44.2 kN49 kN——1.56 kg1560 g
SKF7011 FEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
16.5 kN12 kN——0.36 kg360 g
SKF7011 FEGA/HCP4ALSuper-precision, high-speed E design, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication
Recorded bore (d)
55 mm
2.165354 in
Recorded outside dimension (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
18 mm
0.708661 in
16.5 kN12 kN——0.373 kg373 g
SKF7011 FEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
16.5 kN12 kN——0.39 kg390 g
SKF7011 FE/HCP4ADBAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27 kN24 kN——0.725 kg725 g
SKF7011 FE/HCP4ALDTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
27 kN24 kN——0.725 kg725 g
NSK7011AWAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Individual bearing width (B)
18 mm
0.708661 in
35.5 kN27.7 kN——0.391 kg391 g
NSK7011AWDBAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
57.5 kN55.5 kN———
NSK7011AWDFAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
57.5 kN55.5 kN———
NSK7011AWDTAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Catalogue width (symbol unverified)
36 mm
1.417323 in
57.5 kN55.5 kN———
KOYO7011BDB FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
56.7 kN47.5 kN—5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6600 min-10.84 kg840 g
KOYO7011BDF FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
56.7 kN47.5 kN—5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6600 min-10.84 kg840 g
KOYO7011BDT FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
56.7 kN47.5 kN—5000 rpmLimiting Speeds(Grease Lub.): 5000 min-1Limiting Speeds(Oil Lub.): 6600 min-10.84 kg840 g
KOYO7011B FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
34.9 kN23.7 kN—6200 rpmLimiting Speeds(Grease Lub.): 6200 min-1Limiting Speeds(Oil Lub.): 8300 min-10.42 kg420 g
KOYO7011CDB FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
69.3 kN57.3 kN—9100 rpmLimiting Speeds(Grease Lub.): 9100 min-1Limiting Speeds(Oil Lub.): 12000 min-10.84 kg840 g
KOYO7011CDF FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
69.3 kN57.3 kN—9100 rpmLimiting Speeds(Grease Lub.): 9100 min-1Limiting Speeds(Oil Lub.): 12000 min-10.84 kg840 g
KOYO7011CDT FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
69.3 kN57.3 kN—9100 rpmLimiting Speeds(Grease Lub.): 9100 min-1Limiting Speeds(Oil Lub.): 12000 min-10.84 kg840 g
KOYO7011C FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
42.6 kN28.6 kN—11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 15000 min-10.42 kg420 g
KOYO7011DB FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.2 kN52.5 kN—6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8300 min-10.84 kg840 g
KOYO7011DF FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.2 kN52.5 kN—6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8300 min-10.84 kg840 g
KOYO7011DT FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
36 mm
1.417323 in
63.2 kN52.5 kN—6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 8300 min-10.84 kg840 g
KOYO7011 FYAngular contact ball bearing
Bore diameter (d)
55 mm
2.165354 in
Outside diameter (D)
90 mm
3.543307 in
Width (B)
18 mm
0.708661 in
38.9 kN26.3 kN—8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1Limiting Speeds(Oil Lub.): 10000 min-10.42 kg420 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
SKF 7011 ACBGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACB/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACDGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACD/HCP4ATBTBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ADGDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4AQBCBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4AQBCCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4AQBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4AQBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ATBTCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACD/P4ATGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACEGA/HCP4AH1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACEGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACEGA/HCP4AL1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACEGA/HCP4AL2WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 ACEGB/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACE/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACE/HCP4AH1DBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACE/HCP4AH1DGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACE/HCP4AH1DTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACE/HCP4ALDGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 ACE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CDGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CDGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CDGAT/P4BNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 7011 CDGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CDGC/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CD/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CD/HCP4ADGBWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CD/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADBAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADBBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADBCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADBDWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADFAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADFCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADGBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ATBTAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/P4ATBTBWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CD/PA9ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CEGA/HCP4AL1WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CEGA/HCP4AL2WithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CEGB/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CE/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CE/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CE/HCP4ADGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CE/HCP4ADTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CE/HCP4ALDGAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 CE/P4ADGAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CE/P4ADGCWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CE/P4ADTWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 CE/P4AQBCAWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 FEGA/HCP4AWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 FEGA/HCP4ALWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 FEGA/P4AWithoutNot recordedNot recordedNot recordedBearing steelNone
SKF 7011 FE/HCP4ADBAWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
SKF 7011 FE/HCP4ALDTWithoutNot recordedNot recordedNot recordedHybrid (ceramic balls)None
NSK 7011AWNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7011AWDBNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7011AWDFNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
NSK 7011AWDTNot recordedNot recordedNot recordedPressed steelNot recordedNot recorded
KOYO 7011BDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011BDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011BDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011B FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011CDB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011CDF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011CDT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011C FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011DB FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011DF FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011DT FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded
KOYO 7011 FYNot recordedNot recordedNot recordedNot recordedNot recordedNot recorded

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

SKF

7011 ACBGA/HCP4A

Super-precision, high-speed B design, universally matchable single row angular contact ball bearing

View full technical record →SKF

7011 ACB/HCP4ADGA

Matched set of two super-precision, high-speed B design, single row angular contact ball bearings

View full technical record →SKF

7011 ACDGA/HCP4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7011 ACDGA/HCP4AL

Super-precision, high-capacity, universally matchable single row angular contact ball bearing suitable for direct oil-air lubrication

View full technical record →SKF

7011 ACDGA/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7011 ACDGB/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7011 ACDGC/P4A

Super-precision, high-capacity, universally matchable single row angular contact ball bearing

View full technical record →SKF

7011 ACD/HCP4ADGB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7011 ACD/HCP4ATBTB

Matched set of three super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7011 ACD/P4A

Super-precision, high-capacity, single row angular contact ball bearing

View full technical record →SKF

7011 ACD/P4ADBA

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →SKF

7011 ACD/P4ADBB

Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings

View full technical record →
Filter all 99 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search