Find · understand · compare
7000 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 7000. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
7000 dimensions and recorded technical data
The recorded 7000 base designation measures 10×26×8 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NTN. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 47 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| NTN7000Angular contact ball bearing |
| 5.1 kN | 2.07 kN | — | — | 0.023 kg23 g |
| SKF7000 ACDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 3.97 kN | 1.6 kN | — | — | 0.019 kg19 g |
| SKF7000 ACDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 3.97 kN | 1.6 kN | — | — | 0.019 kg19 g |
| SKF7000 ACDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 3.97 kN | 1.6 kN | — | — | 0.019 kg19 g |
| SKF7000 ACD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 3.97 kN | 1.6 kN | — | — | 0.019 kg19 g |
| SKF7000 ACD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.5 kN | 3.2 kN | — | — | 0.038 kg38 g |
| SKF7000 ACD/P4ADGDMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.5 kN | 3.2 kN | — | — | 0.038 kg38 g |
| SKF7000 ACEGB/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 2.86 kN | 1.14 kN | — | — | 0.019 kg19 g |
| SKF7000 ACE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 4.68 kN | 2.28 kN | — | — | 0.034 kg34 g |
| SKF7000 CDGA/HCP4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.1 kN | 1.66 kN | — | — | 0.017 kg17 g |
| SKF7000 CDGA/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.1 kN | 1.66 kN | — | — | 0.019 kg19 g |
| SKF7000 CDGB/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.1 kN | 1.66 kN | — | — | 0.019 kg19 g |
| SKF7000 CDGC/P4ASuper-precision, high-capacity, universally matchable single row angular contact ball bearing |
| 4.1 kN | 1.66 kN | — | — | 0.019 kg19 g |
| SKF7000 CD/HCP4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 4.1 kN | 1.66 kN | — | — | 0.017 kg17 g |
| SKF7000 CD/HCP4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.63 kN | 3.25 kN | — | — | 0.033 kg33 g |
| SKF7000 CD/P4ASuper-precision, high-capacity, single row angular contact ball bearing |
| 4.1 kN | 1.66 kN | — | — | 0.019 kg19 g |
| SKF7000 CD/P4ADBAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.63 kN | 3.25 kN | — | — | 0.038 kg38 g |
| SKF7000 CD/P4ADBBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.63 kN | 3.25 kN | — | — | 0.038 kg38 g |
| SKF7000 CD/P4ADBCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.63 kN | 3.25 kN | — | — | 0.038 kg38 g |
| SKF7000 CD/P4ADGAMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.63 kN | 3.25 kN | — | — | 0.038 kg38 g |
| SKF7000 CD/P4ADGBMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.63 kN | 3.25 kN | — | — | 0.038 kg38 g |
| SKF7000 CD/P4ADGCMatched set of two super-precision, high-capacity, D design, single row angular contact ball bearings |
| 6.63 kN | 3.25 kN | — | — | 0.038 kg38 g |
| SKF7000 CEGA/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 3.02 kN | 1.18 kN | — | — | 0.017 kg17 g |
| SKF7000 CEGA/P4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 3.02 kN | 1.18 kN | — | — | 0.019 kg19 g |
| SKF7000 CEGB/HCP4ASuper-precision, high-speed E design, universally matchable single row angular contact ball bearing |
| 3.02 kN | 1.18 kN | — | — | 0.017 kg17 g |
| SKF7000 CE/HCP4ASuper-precision, high-speed E design, single row angular contact ball bearing |
| 3.02 kN | 1.18 kN | — | — | 0.017 kg17 g |
| SKF7000 CE/HCP4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 4.88 kN | 2.36 kN | — | — | 0.038 kg38 g |
| SKF7000 CE/HCP4ADGCMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 4.88 kN | 2.36 kN | — | — | 0.033 kg33 g |
| SKF7000 CE/HCP4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 4.88 kN | 2.36 kN | — | — | 0.038 kg38 g |
| SKF7000 CE/P4ADGAMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 4.88 kN | 2.36 kN | — | — | 0.038 kg38 g |
| SKF7000 CE/P4ADTMatched set of two super-precision, high-speed E design, single row angular contact ball bearings |
| 4.88 kN | 2.36 kN | — | — | 0.04 kg40 g |
| NSK7000AWAngular contact ball bearing |
| 5.9 kN | 2.6 kN | — | — | 0.019 kg19 g |
| NSK7000AWDBAngular contact ball bearing |
| 9.6 kN | 5.2 kN | — | — | — |
| NSK7000AWDFAngular contact ball bearing |
| 9.6 kN | 5.2 kN | — | — | — |
| NSK7000AWDTAngular contact ball bearing |
| 9.6 kN | 5.2 kN | — | — | — |
| KOYO7000BDB FYAngular contact ball bearing |
| 9.4 kN | 4.35 kN | — | 20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1Limiting Speeds(Oil Lub.): 27000 min-1 | 0.042 kg42 g |
| KOYO7000BDF FYAngular contact ball bearing |
| 9.4 kN | 4.35 kN | — | 20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1Limiting Speeds(Oil Lub.): 27000 min-1 | 0.042 kg42 g |
| KOYO7000BDT FYAngular contact ball bearing |
| 9.4 kN | 4.35 kN | — | 20000 rpmLimiting Speeds(Grease Lub.): 20000 min-1Limiting Speeds(Oil Lub.): 27000 min-1 | 0.042 kg42 g |
| KOYO7000B FYAngular contact ball bearing |
| 5.8 kN | 2.15 kN | — | 25000 rpmLimiting Speeds(Grease Lub.): 25000 min-1Limiting Speeds(Oil Lub.): 33000 min-1 | 0.021 kg21 g |
| KOYO7000CDB FYAngular contact ball bearing |
| 10.7 kN | 4.95 kN | — | 37000 rpmLimiting Speeds(Grease Lub.): 37000 min-1Limiting Speeds(Oil Lub.): 50000 min-1 | 0.042 kg42 g |
| KOYO7000CDF FYAngular contact ball bearing |
| 10.7 kN | 4.95 kN | — | 37000 rpmLimiting Speeds(Grease Lub.): 37000 min-1Limiting Speeds(Oil Lub.): 50000 min-1 | 0.042 kg42 g |
| KOYO7000CDT FYAngular contact ball bearing |
| 10.7 kN | 4.95 kN | — | 37000 rpmLimiting Speeds(Grease Lub.): 37000 min-1Limiting Speeds(Oil Lub.): 50000 min-1 | 0.042 kg42 g |
| KOYO7000C FYAngular contact ball bearing |
| 6.6 kN | 2.45 kN | — | 47000 rpmLimiting Speeds(Grease Lub.): 47000 min-1Limiting Speeds(Oil Lub.): 62000 min-1 | 0.021 kg21 g |
| KOYO7000DB FYAngular contact ball bearing |
| 10.1 kN | 4.65 kN | — | 27000 rpmLimiting Speeds(Grease Lub.): 27000 min-1Limiting Speeds(Oil Lub.): 34000 min-1 | 0.042 kg42 g |
| KOYO7000DF FYAngular contact ball bearing |
| 10.1 kN | 4.65 kN | — | 27000 rpmLimiting Speeds(Grease Lub.): 27000 min-1Limiting Speeds(Oil Lub.): 34000 min-1 | 0.042 kg42 g |
| KOYO7000DT FYAngular contact ball bearing |
| 10.1 kN | 4.65 kN | — | 27000 rpmLimiting Speeds(Grease Lub.): 27000 min-1Limiting Speeds(Oil Lub.): 34000 min-1 | 0.042 kg42 g |
| KOYO7000 FYAngular contact ball bearing |
| 6.25 kN | 2.35 kN | — | 34000 rpmLimiting Speeds(Grease Lub.): 34000 min-1Limiting Speeds(Oil Lub.): 42000 min-1 | 0.021 kg21 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| NTN 7000 | Not recorded | Not recorded | CN | polyamide cage. | Not recorded | Not recorded |
| SKF 7000 ACDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 ACDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 ACDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 ACD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 ACD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 ACD/P4ADGD | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 ACEGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 ACE/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CDGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CDGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CDGB/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CDGC/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CD/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CD/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CD/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CD/P4ADBA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CD/P4ADBB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CD/P4ADBC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CD/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CD/P4ADGB | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CD/P4ADGC | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CEGA/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CEGA/P4A | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CEGB/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CE/HCP4A | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CE/HCP4ADGA | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CE/HCP4ADGC | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CE/HCP4ADT | Without | Not recorded | Not recorded | Not recorded | Hybrid (ceramic balls) | None |
| SKF 7000 CE/P4ADGA | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| SKF 7000 CE/P4ADT | Without | Not recorded | Not recorded | Not recorded | Bearing steel | None |
| NSK 7000AW | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7000AWDB | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7000AWDF | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 7000AWDT | Not recorded | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 7000BDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000BDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000BDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000B FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000CDB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000CDF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000CDT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000C FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000DB FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000DF FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000DT FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 7000 FY | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
NTN
7000
Angular contact ball bearing
View full technical record →SKF7000 ACDGA/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7000 ACDGB/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7000 ACDGC/P4A
Super-precision, high-capacity, universally matchable single row angular contact ball bearing
View full technical record →SKF7000 ACD/P4A
Super-precision, high-capacity, single row angular contact ball bearing
View full technical record →SKF7000 ACD/P4ADGA
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7000 ACD/P4ADGD
Matched set of two super-precision, high-capacity, D design, single row angular contact ball bearings
View full technical record →SKF7000 ACEGB/P4A
Super-precision, high-speed E design, universally matchable single row angular contact ball bearing
View full technical record →SKF7000 ACE/HCP4ADGA
Matched set of two super-precision, high-speed E design, single row angular contact ball bearings
View full technical record →NSK7000AW
Angular contact ball bearing
View full technical record →NSK7000AWDB
Angular contact ball bearing
View full technical record →NSK7000AWDF
Angular contact ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.