685 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 685. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
685 dimensions and recorded technical data
The recorded 685 base designation measures 5×11×3 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 15 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| NSK685Deep groove ball bearing |
| 0.79 kN | 0.281 kN | — | — | 0.0012 kg1.2 g |
| KOYO685Deep groove ball bearing |
| 0.89 kN | 0.28 kN | — | 53000 rpmLimiting Speeds(Grease Lub.): 53000 min-1Limiting Speeds(Oil Lub.): 63000 min-1 | 0.001 kg1 g |
| FAG685-2RSR>NDeep groove ball bearing |
| 0.76 kN | 0.28 kN | — | 39500 rpm | 0.00193 kg1.93 g |
| FAG685-2Z>NDeep groove ball bearing |
| 0.76 kN | 0.28 kN | 56000 rpm | 71000 rpm | 0.002 kg2 g |
| FAG685>NDeep groove ball bearing |
| 0.76 kN | 0.28 kN | 41000 rpm | 84000 rpm | 0.00116 kg1.16 g |
| TIMKEN685 / 672Tapered roller bearing |
| 265 kN | 386 kN | — | — | 3.54 kg3540 g |
| TIMKEN685 / 674Tapered roller bearing |
| 265 kN | 386 kN | — | — | 3.7 kg3700 g |
| TIMKEN685-90045Tapered roller bearing |
| 265 kN | 386 kN | — | — | 3.54 kg3540 g |
| TIMKEN685-90049Tapered roller bearing |
| 461 kN | 772 kN | — | — | 7.9 kg7900 g |
| TIMKEN685-90050Tapered roller bearing |
| 461 kN | 772 kN | — | — | 7.9 kg7900 g |
| TIMKEN685-90051Tapered roller bearing |
| 461 kN | 772 kN | — | — | 7.9 kg7900 g |
| TIMKEN685-90179Tapered roller bearing |
| 461 kN | 772 kN | — | — | 7.84 kg7840 g |
| NSK685ZZDeep groove ball bearing |
| 0.79 kN | 0.281 kN | — | — | 0.00196 kg1.96 g |
| KOYO685/672Tapered roller bearing |
| 282 kN | 349 kN | — | 2200 rpmLimiting Speeds(Grease Lub.): 2200 min-1Limiting Speeds(Oil Lub.): 3000 min-1 | 3.51 kg3510 g |
| EZO685ZZDeep groove ball bearing |
| 0.716 kN | 0.283 kN | — | — | 0.00183 kg1.83 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| NSK 685 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 685 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| FAG 685-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 685-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 685>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 685 / 672 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 685 / 674 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| TIMKEN 685-90045 | Open | ABMA Class 00 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 685-90049 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 685-90050 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 685-90051 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 685-90179 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 685ZZ | Metal shields on both sides (ZZ) | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 685/672 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| EZO 685ZZ | Two pressed-steel shields | Not recorded | Not recorded | Not recorded | High-carbon chromium bearing steel | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
685
Deep groove ball bearing
View full technical record →NSK685
Deep groove ball bearing
View full technical record →KOYO68/500
Deep groove ball bearing
View full technical record →KOYO6852
Deep groove ball bearing
View full technical record →FAG685-2RSR>N
Deep groove ball bearing
View full technical record →FAG685-2Z>N
Deep groove ball bearing
View full technical record →KOYO68/530
Deep groove ball bearing
View full technical record →KOYO6856
Deep groove ball bearing
View full technical record →KOYO68/560
Deep groove ball bearing
View full technical record →TIMKEN685 / 672
Tapered roller bearing
View full technical record →KOYO685/672
Tapered roller bearing
View full technical record →TIMKEN685 / 674
Tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.