6812 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6812. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6812 dimensions and recorded technical data
The recorded 6812 base designation measures 60×78×10 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 8 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| NSK6812Deep groove ball bearing |
| 12.6 kN | 10.9 kN | — | — | 0.103 kg103 g |
| KOYO6812Deep groove ball bearing |
| 14.3 kN | 10.6 kN | — | 8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1Limiting Speeds(Oil Lub.): 9400 min-1 | 0.104 kg104 g |
| NSK6812DDDeep groove ball bearing |
| 12.6 kN | 10.9 kN | — | — | — |
| NSK6812VVDeep groove ball bearing |
| 12.6 kN | 10.9 kN | — | — | — |
| NSK6812ZZDeep groove ball bearing |
| 12.6 kN | 10.9 kN | — | — | — |
| KOYO6812 2RDDeep groove ball bearing |
| 14.3 kN | 10.6 kN | — | 7200 rpmLimiting Speeds(Grease Lub.): 7200 min-1 | 0.104 kg104 g |
| KOYO6812 2RUDeep groove ball bearing |
| 14.3 kN | 10.6 kN | — | 8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1 | 0.104 kg104 g |
| KOYO6812 ZZDeep groove ball bearing |
| 14.3 kN | 10.6 kN | — | 8000 rpmLimiting Speeds(Grease Lub.): 8000 min-1 | 0.104 kg104 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| NSK 6812 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6812 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6812DD | Contact-sealed DD catalogue type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6812VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6812ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6812 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6812 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6812 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6812
Deep groove ball bearing
View full technical record →NSK6812
Deep groove ball bearing
View full technical record →KOYO6812 2RD
Deep groove ball bearing
View full technical record →KOYO6812 2RU
Deep groove ball bearing
View full technical record →KOYO68/1250
Deep groove ball bearing
View full technical record →NSK6812DD
Deep groove ball bearing
View full technical record →NSK6812VV
Deep groove ball bearing
View full technical record →KOYO6812 ZZ
Deep groove ball bearing
View full technical record →NSK6812ZZ
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.