Find · understand · compare
67388 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 67388. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
67388 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 42 recorded variants are listed. A dash means the value is missing, not zero.
Catalogue parameters for 67388
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 67388 — 16 recorded parameters
Single row tapered roller bearing, cone
Reference: SKF product catalogue; source snapshot 2026-09-02.
This designation identifies a tapered-bearing component. A cone or cup alone is not the assembled bearing; use the documented pairing and total assembly width before comparing an interchange.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 127.0 mm |
| Width, total | Not separately recorded | 46.038 mm |
| Width, inner ring | Not separately recorded | 46.038 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 395.0 kN |
| Basic static load rating | Not separately recorded | 585.0 kN |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bearing part | Not separately recorded | Inner ring, cage and roller assembly (cone assembly) |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Arrangement of contact angle (double-row bearing) | Not separately recorded | Not applicable |
| Matched arrangement | Not separately recorded | No |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Unit system | Not separately recorded | Inch |
| Indicative carbon footprint for new product | Not separately recorded | 13.3 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 3.59 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF67388Single row tapered roller bearing, cone |
| 395 kN | 585 kN | — | — | 3.59 kg3590 g |
| TIMKEN67388 / 67320Tapered roller bearing |
| 368 kN | 625 kN | — | — | 5.65 kg5650 g |
| TIMKEN67388 / 67322Tapered roller bearing |
| 368 kN | 625 kN | — | — | 5.05 kg5050 g |
| TIMKEN67388 / 67324Tapered roller bearing |
| 368 kN | 625 kN | — | — | 5.87 kg5870 g |
| TIMKEN67388-90012Tapered roller bearing |
| 368 kN | 625 kN | — | — | 5.65 kg5650 g |
| TIMKEN67388-90015Tapered roller bearing |
| 368 kN | 625 kN | — | — | 5.05 kg5050 g |
| TIMKEN67388-90017Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90018Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90019Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90020Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90021Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90022Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90023Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90030Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.57 kg10570 g |
| TIMKEN67388-90032Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 11.36 kg11360 g |
| TIMKEN67388-90035Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90088Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.57 kg10570 g |
| TIMKEN67388-90089Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90106Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 11.36 kg11360 g |
| TIMKEN67388-90164Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90180Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90195Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 11.36 kg11360 g |
| TIMKEN67388-90201Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90218Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-90220Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 11.36 kg11360 g |
| TIMKEN67388-90224Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-902A9Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-902B1Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.68 kg10680 g |
| TIMKEN67388-902B8Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-902C2Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.57 kg10570 g |
| TIMKEN67388-902C7Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 11.33 kg11330 g |
| TIMKEN67388-902C8Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 12.14 kg12140 g |
| TIMKEN67388-902C9Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-902D4Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.7 kg10700 g |
| TIMKEN67388-903A2Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-903A8Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-903D1Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-905A8Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
| TIMKEN67388-905D2Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.7 kg10700 g |
| TIMKEN67388-99302Tapered roller bearing |
| 368 kN | 625 kN | — | — | 5.05 kg5050 g |
| TIMKEN67388-99419Tapered roller bearing |
| 368 kN | 625 kN | — | — | 5.65 kg5650 g |
| TIMKEN67388SL-902C5Tapered roller bearing |
| 640 kN | 1250 kN | — | — | 10.71 kg10710 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 67388 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| TIMKEN 67388 / 67320 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388 / 67322 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388 / 67324 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| TIMKEN 67388-90012 | Open | ABMA Class 0 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90015 | Open | ABMA Class 0 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90017 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90018 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90019 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90020 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90021 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90022 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90023 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90030 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90032 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90035 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90088 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90089 | Open | ABMA Class 3 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90106 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90164 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90180 | Open | ABMA Class 3 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90195 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90201 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90218 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90220 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-90224 | Open | ABMA Class 3 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-902A9 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-902B1 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-902B8 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-902C2 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-902C7 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-902C8 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-902C9 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-902D4 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-903A2 | Open | ABMA Class 3 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-903A8 | Open | ABMA Class 3 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-903D1 | Open | ABMA Class 3 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-905A8 | Open | ABMA Class 0 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-905D2 | Open | ABMA Class 0 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-99302 | Open | ABMA Class 3 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388-99419 | Open | ABMA Class 3 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 67388SL-902C5 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
67388
Single row tapered roller bearing, cone
View full technical record →TIMKEN67388 / 67320
Tapered roller bearing
View full technical record →TIMKEN67388 / 67322
Tapered roller bearing
View full technical record →TIMKEN67388 / 67324
Tapered roller bearing
View full technical record →TIMKEN67388-90012
Tapered roller bearing
View full technical record →TIMKEN67388-90015
Tapered roller bearing
View full technical record →TIMKEN67388-90017
Tapered roller bearing
View full technical record →TIMKEN67388-90018
Tapered roller bearing
View full technical record →TIMKEN67388-90019
Tapered roller bearing
View full technical record →TIMKEN67388-90020
Tapered roller bearing
View full technical record →TIMKEN67388-90021
Tapered roller bearing
View full technical record →TIMKEN67388-90022
Tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.