636 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 636. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
636 dimensions and recorded technical data
The recorded 636 base designation measures 6×22×7 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 10 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| NSK636Deep groove ball bearing |
| 3.65 kN | 1.37 kN | — | — | 0.014 kg14 g |
| KOYO636Deep groove ball bearing |
| 4.1 kN | 1.35 kN | — | 31000 rpmLimiting Speeds(Grease Lub.): 31000 min-1Limiting Speeds(Oil Lub.): 37000 min-1 | 0.013 kg13 g |
| FAG636-2Z>NDeep groove ball bearing |
| 3.5 kN | 1.37 kN | 25500 rpm | 40000 rpm | 0.01294 kg12.94 g |
| TIMKEN636 / 632Tapered roller bearing |
| 276 kN | 298 kN | — | — | 3.12 kg3120 g |
| TIMKEN636 / 633Tapered roller bearing |
| 276 kN | 298 kN | — | — | 2.78 kg2780 g |
| NSK636DDDeep groove ball bearing |
| 3.65 kN | 1.37 kN | — | — | — |
| NSK636VVDeep groove ball bearing |
| 3.65 kN | 1.37 kN | — | — | — |
| NSK636ZZ1Deep groove ball bearing |
| 3.65 kN | 1.37 kN | — | — | 0.014 kg14 g |
| KOYO636 2RSDeep groove ball bearing |
| 4.1 kN | 1.35 kN | — | 23000 rpmLimiting Speeds(Grease Lub.): 23000 min-1Limiting Speeds(Oil Lub.): - min-1 | 0.013 kg13 g |
| KOYO636 ZZDeep groove ball bearing |
| 4.1 kN | 1.35 kN | — | 31000 rpmLimiting Speeds(Grease Lub.): 31000 min-1Limiting Speeds(Oil Lub.): - min-1 | 0.013 kg13 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| NSK 636 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 636 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| FAG 636-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| TIMKEN 636 / 632 | Open | ABMA Class 2 | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 636 / 633 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 636DD | Contact rubber seals on both sides (DD) | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 636VV | Non-contact rubber seals on both sides (VV) | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 636ZZ1 | Metal shields on both sides (ZZ1) | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 636 2RS | Contact sealed 2RS | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 636 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
636
Deep groove ball bearing
View full technical record →NSK636
Deep groove ball bearing
View full technical record →KOYO6360
Deep groove ball bearing
View full technical record →TIMKEN6361 / 6320
Tapered roller bearing
View full technical record →TIMKEN6361 / 6321
Tapered roller bearing
View full technical record →KOYO636 2RS
Deep groove ball bearing
View full technical record →FAG636-2Z>N
Deep groove ball bearing
View full technical record →KOYO6364
Deep groove ball bearing
View full technical record →FAG6364-M
Deep groove ball bearing
View full technical record →TIMKEN636 / 632
Tapered roller bearing
View full technical record →TIMKEN636 / 633
Tapered roller bearing
View full technical record →KOYO6368
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.