6332 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6332. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6332 dimensions and recorded technical data
This base designation has conflicting recorded dimensions. Choose the complete brand and designation below. A single dimensional answer would hide a real difference between records.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 21 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6332Deep groove ball bearing |
| 276 kN | 285 kN | 4000 rpm | 2600 rpm | 26.2 kg26200 g |
| NSK6332Deep groove ball bearing |
| 305 kN | 287 kN | — | — | 26.2 kg26200 g |
| KOYO63/32Deep groove ball bearing |
| 37.6 kN | 16.2 kN | — | 9300 rpmLimiting Speeds(Grease Lub.): 9300 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.437 kg437 g |
| KOYO6332Deep groove ball bearing |
| 347 kN | 286 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1Limiting Speeds(Oil Lub.): 2200 min-1 | 29 kg29000 g |
| NACHI63/32Deep groove ball bearing |
| 38 kN | 16.2 kN | — | — | 0.382 kg382 g |
| SKF6332/HC5C3S0VA970Hybrid ceramic deep groove ball bearing for wind turbine generators |
| 276 kN | 290 kN | 4500 rpm | 2800 rpm | 23.8 kg23800 g |
| SKF6332 MDeep groove ball bearing |
| 276 kN | 285 kN | 4000 rpm | 3800 rpm | 30.3 kg30300 g |
| SKF6332 M/C3Deep groove ball bearing |
| 276 kN | 285 kN | 4000 rpm | 3800 rpm | 30.3 kg30300 g |
| SKF6332 M/C3VL2071INSOCOAT® deep groove ball bearing |
| 291 kN | 285 kN | 4000 rpm | 3800 rpm | 30.3 kg30300 g |
| SKF6332 M/C4Deep groove ball bearing |
| 276 kN | 285 kN | 4000 rpm | 3800 rpm | 30.3 kg30300 g |
| FAG6332-GDeep groove ball bearing |
| 330 kN | 405 kN | 2700 rpm | 2650 rpm | 27 kg27000 g |
| FAG6332-MDeep groove ball bearing |
| 300 kN | 320 kN | 2800 rpm | 3400 rpm | 31.6 kg31600 g |
| FAG6332-M-C3Deep groove ball bearing |
| 300 kN | 320 kN | 2800 rpm | 3400 rpm | 31.8 kg31800 g |
| FAG6332-M-C4Deep groove ball bearing |
| 300 kN | 320 kN | 2800 rpm | 3400 rpm | 31.8 kg31800 g |
| FAG6332-M-J20AADeep groove ball bearing |
| 300 kN | 320 kN | 2800 rpm | 3400 rpm | 31.25 kg31250 g |
| FAG6332-M-J20AA-C3Deep groove ball bearing |
| 300 kN | 320 kN | 2800 rpm | 3400 rpm | 31.25 kg31250 g |
| FAG6332-M-J20CDeep groove ball bearing |
| 300 kN | 320 kN | 2800 rpm | 3400 rpm | 31.28 kg31280 g |
| FAG6332-M-J20C-C3Deep groove ball bearing |
| 300 kN | 320 kN | 2800 rpm | 3400 rpm | 31.28 kg31280 g |
| FAG6332-M-J20C-C4Deep groove ball bearing |
| 300 kN | 320 kN | 2800 rpm | 3400 rpm | 31.28 kg31280 g |
| TIMKEN6332MDeep groove ball bearing |
| 301 kN | 316 kN | — | — | 32.9 kg32900 g |
| NSK6332ZZSDeep groove ball bearing |
| 305 kN | 287 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6332 | Without | Normal | CN | Sheet metal | Bearing steel | None |
| NSK 6332 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 63/32 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6332 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 63/32 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6332/HC5C3S0VA970 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6332 M | Without | Normal | CN | Machined brass | Bearing steel | None |
| SKF 6332 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6332 M/C3VL2071 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6332 M/C4 | Without | Not recorded | C4 | Machined brass | Bearing steel | None |
| FAG 6332-G | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6332-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6332-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6332-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6332-M-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6332-M-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6332-M-J20C | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6332-M-J20C-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6332-M-J20C-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| TIMKEN 6332M | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 6332ZZS | Shielded ZZS catalogue type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6332
Deep groove ball bearing
View full technical record →KOYO63/32
Deep groove ball bearing
View full technical record →KOYO6332
Deep groove ball bearing
View full technical record →NSK6332
Deep groove ball bearing
View full technical record →NACHI63/32
Deep groove ball bearing
View full technical record →NACHI63/32-2NKE9
Deep groove ball bearing
View full technical record →NACHI63/32-2NSE9
Deep groove ball bearing
View full technical record →KOYO63/32 2RD
Deep groove ball bearing
View full technical record →KOYO63/32 2RS
Deep groove ball bearing
View full technical record →KOYO63/32 2RU
Deep groove ball bearing
View full technical record →FAG6332-G
Deep groove ball bearing
View full technical record →SKF6332/HC5C3S0VA970
Hybrid ceramic deep groove ball bearing for wind turbine generators
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.