Find · understand · compare
6328 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6328. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6328 dimensions and recorded technical data
This base designation has conflicting recorded dimensions. Choose the complete brand and designation below. A single dimensional answer would hide a real difference between records.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 28 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6328Deep groove ball bearing |
| 251 kN | 245 kN | 4800 rpm | 3000 rpm | 18.6 kg18600 g |
| NSK6328Deep groove ball bearing |
| 278 kN | 246 kN | — | — | 18.5 kg18500 g |
| KOYO63/28Deep groove ball bearing |
| 29.4 kN | 13.1 kN | — | 10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 12000 min-1 | 0.328 kg328 g |
| KOYO6328Deep groove ball bearing |
| 316 kN | 246 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2500 min-1 | 19.4 kg19400 g |
| NACHI63/28Deep groove ball bearing |
| 33.5 kN | 14 kN | — | — | 0.287 kg287 g |
| SKF6328/C3Deep groove ball bearing |
| 251 kN | 245 kN | 4800 rpm | 3000 rpm | 18.6 kg18600 g |
| SKF6328/C3VL2071INSOCOAT® deep groove ball bearing |
| 265 kN | 245 kN | 4800 rpm | 3000 rpm | 18.2 kg18200 g |
| SKF6328/HC5C3S0VA970Hybrid ceramic deep groove ball bearing for wind turbine generators |
| 251 kN | 245 kN | 5600 rpm | 3600 rpm | 16.4 kg16400 g |
| SKF6328 MDeep groove ball bearing |
| 251 kN | 245 kN | 4800 rpm | 4300 rpm | 20.6 kg20600 g |
| SKF6328 M/C3Deep groove ball bearing |
| 251 kN | 245 kN | 4800 rpm | 4300 rpm | 20.6 kg20600 g |
| SKF6328 M/C3VL2071INSOCOAT® deep groove ball bearing |
| 265 kN | 245 kN | 4800 rpm | 4300 rpm | 21.3 kg21300 g |
| FAG6328-C3Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 2950 rpm | 18.6 kg18600 g |
| FAG6328-J20C-C3Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 2950 rpm | 18.6 kg18600 g |
| FAG6328-MDeep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.767 kg21767 g |
| FAG6328-M-C3Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.767 kg21767 g |
| FAG6328-M-C4Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.767 kg21767 g |
| FAG6328-M-J20AADeep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.9 kg21900 g |
| FAG6328-M-J20AA-C3Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.9 kg21900 g |
| FAG6328-M-J20AA-C4Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.9 kg21900 g |
| FAG6328-M-J20ABDeep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.9 kg21900 g |
| FAG6328-M-J20AB-C3Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.9 kg21900 g |
| FAG6328-M-J20CDeep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 22.1 kg22100 g |
| FAG6328-M-J20C-C3Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 22 kg22000 g |
| FAG6328-M-J20GB-C3Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.9 kg21900 g |
| FAG6328-M-J20GB-C4Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.9 kg21900 g |
| FAG6328-M-J20GB-R152-203Deep groove ball bearing |
| 270 kN | 246 kN | 3250 rpm | 3850 rpm | 21.9 kg21900 g |
| NSK6328ZZSDeep groove ball bearing |
| 278 kN | 246 kN | — | — | — |
| KOYO6328 ZZXDeep groove ball bearing |
| 316 kN | 246 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1 | 19.4 kg19400 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6328 | Without | Normal | CN | Sheet metal | Bearing steel | None |
| NSK 6328 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 63/28 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6328 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 63/28 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6328/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6328/C3VL2071 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6328/HC5C3S0VA970 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6328 M | Without | Normal | CN | Machined brass | Bearing steel | None |
| SKF 6328 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6328 M/C3VL2071 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| FAG 6328-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6328-J20C-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6328-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20AA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20AB | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20AB-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20C | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20C-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20GB-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20GB-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6328-M-J20GB-R152-203 | Without — Not sealed | PN — Normal (ISO 492:2023) | R$-$ — Special radial internal clearance in µm | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| NSK 6328ZZS | Shielded ZZS catalogue type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6328 ZZX | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6328
Deep groove ball bearing
View full technical record →KOYO63/28
Deep groove ball bearing
View full technical record →KOYO6328
Deep groove ball bearing
View full technical record →NSK6328
Deep groove ball bearing
View full technical record →NACHI63/28
Deep groove ball bearing
View full technical record →NACHI63/28-2NKE9
Deep groove ball bearing
View full technical record →NACHI63/28-2NSE9
Deep groove ball bearing
View full technical record →KOYO63/28 2RD
Deep groove ball bearing
View full technical record →KOYO63/28 2RS
Deep groove ball bearing
View full technical record →KOYO63/28 2RU
Deep groove ball bearing
View full technical record →SKF63/28/C3
Deep groove ball bearing
View full technical record →SKF6328/C3
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.