Find · understand · compare
6314 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6314. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6314 dimensions and recorded technical data
The recorded 6314 base designation measures 70×150×35 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 116 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6314
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6314/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 70.0 mm |
| Outside diameter | Not supplied separately | 150.0 mm |
| Width | Not supplied separately | 35.0 mm |
SKF 6314 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.012 to 0 mm |
| Outside diameter | D | 150 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.015 to 0 mm |
| Width | B | 35 mm |
| Deviation limits of ring width | t ΔBs | -0.1 to 0 mm |
| Shoulder diameter | d 1 | ≈ 94.95 mm |
| Recess diameter | D 2 | ≈ 129.9 mm |
| Chamfer dimension | r 1,2 | min. 2.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 82 mm |
| Diameter of housing abutment | D a | max. 138 mm |
| Radius of shaft or housing fillet | r a | max. 2 mm |
FAG 6314 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Outside diameter | D | 150 mm |
| Width | B | 35 mm |
| Minimum chamfer dimension | rmin | 2.1 mm |
| Shoulder diameter outer ring | D1 | 126.34 mm |
| Caliber diameter outer ring | D2 | 130.18 mm |
| Shoulder diameter inner ring | d1 | 94.75 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 82 mm |
| Maximum diameter of housing shoulder | Da max | 138 mm |
| Maximum fillet radius | ra max | 2.1 mm |
FAG 6314-C3 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Outside diameter | D | 150 mm |
| Width | B | 35 mm |
| Minimum chamfer dimension | rmin | 2.1 mm |
| Shoulder diameter outer ring | D1 | 126.34 mm |
| Caliber diameter outer ring | D2 | 130.18 mm |
| Shoulder diameter inner ring | d1 | 95.08 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 82 mm |
| Maximum diameter of housing shoulder | Da max | 138 mm |
| Maximum fillet radius | ra max | 2.1 mm |
KOYO 6314 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Outside diameter | D | 150 mm |
| Width | B | 35 mm |
KOYO 6314 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Outside diameter | D | 150 mm |
| Width | B | 35 mm |
TIMKEN 6314-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 70 mm |
| O.D. (D) | D | 150 mm / 5.906 in |
| Width (B) | B | 35 mm / 1.378 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.1 mm / 0.083 in |
TIMKEN 6314 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 70 mm |
| O.D. (D) | D | 150 mm / 5.906 in |
| Width (B) | B | 35 mm / 1.378 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.1 mm / 0.083 in |
TIMKEN 6314-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 70 mm |
| O.D. (D) | D | 150 mm / 5.906 in |
| Width (B) | B | 35 mm / 1.378 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.1 mm / 0.083 in |
Catalogue parameters for 6314
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6314/C3 — 21 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 70.0 mm |
| Outside diameter | Not separately recorded | 150.0 mm |
| Width | Not separately recorded | 35.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 111.0 kN |
| Basic static load rating | Not separately recorded | 68.0 kN |
| Reference speed | Not separately recorded | 9500.0 r/min |
| Limiting speed | Not separately recorded | 6300.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | C3 |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 9.2 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 2.49 kg |
FAG 6314-C3 — 48 recorded parameters
Deep groove ball bearing
Reference: Schaeffler medias — FAG; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Main Dimensions & Performance Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Bore diameter | d | 2.756 in |
| Outside diameter | D | 150 mm |
| Outside diameter | D | 5.906 in |
| Width | B | 35 mm |
| Width | B | 1.378 in |
| Basic dynamic load rating, radial | Cr | 115,000 N |
| Basic dynamic load rating, radial | Cr | 25,854.317 lbf |
| Basic static load rating, radial | C0r | 69,000 N |
| Basic static load rating, radial | C0r | 15,512.59 lbf |
| Fatigue load limit, radial | Cur | 4,600 N |
| Fatigue load limit, radial | Cur | 1,034.173 lbf |
| Limiting speed | nG | 6,800 1/min |
| Reference speed | nϑr | 6,100 1/min |
| Mass | ≈m | 2.496 kg |
| Mass | ≈m | 5.503 lbs |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 82 mm |
| Minimum diameter shaft shoulder | da min | 3.228 in |
| Maximum diameter of housing shoulder | Da max | 138 mm |
| Maximum diameter of housing shoulder | Da max | 5.433 in |
| Maximum fillet radius | ra max | 2.1 mm |
| Maximum fillet radius | ra max | 0.083 in |
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum chamfer dimension | rmin | 2.1 mm |
| Minimum chamfer dimension | rmin | 0.083 in |
| Shoulder diameter outer ring | D1 | 126.34 mm |
| Shoulder diameter outer ring | D1 | 4.974 in |
| Caliber diameter outer ring | D2 | 130.18 mm |
| Caliber diameter outer ring | D2 | 5.125 in |
| Shoulder diameter inner ring | d1 | 95.08 mm |
| Shoulder diameter inner ring | d1 | 3.743 in |
Temperature range
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C |
| Operating temperature min. | Tmin | -22 °F |
| Operating temperature max. | Tmax | 150 °C |
| Operating temperature max. | Tmax | 302 °F |
Calculation factors
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Calculation factor | f0 | 13.4 |
Product characteristics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Type of Seal | Without | Not sealed |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | C3 (Group 3) | Internal clearance larger than CN |
| Bore type | Z | Cylindrical |
Capabilities & suitability
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Radial load capacity | Not separately recorded | Yes |
| Axial load capacity in one direction | Not separately recorded | Yes |
| Axial load capacity in both directions | Not separately recorded | Yes |
| Suitable for grease lubrication | Not separately recorded | Yes |
| Suitable for oil lubrication | Not separately recorded | Yes |
| Unsealed design | Not separately recorded | Yes |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6314Deep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.49 kg2490 g |
| FAG6314Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.496 kg2496 g |
| TIMKEN6314Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| NSK6314Deep groove ball bearing |
| 115 kN | 68 kN | — | — | 2.57 kg2570 g |
| KOYO6314Deep groove ball bearing |
| 130 kN | 68.2 kN | — | 4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1Limiting Speeds(Oil Lub.): 5400 min-1 | 2.52 kg2520 g |
| SKF6314-2RS1Deep groove ball bearing with seals or shields |
| 111 kN | 68 kN | — | 3000 rpm | 2.55 kg2550 g |
| SKF6314-2RS1/C3Deep groove ball bearing with seals or shields |
| 111 kN | 68 kN | 9500 rpm | 3000 rpm | 2.56 kg2560 g |
| SKF6314-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 111 kN | 68 kN | — | 3000 rpm | 2.65 kg2650 g |
| SKF6314-2RS1/GJNDeep groove ball bearing with seals or shields |
| 111 kN | 68 kN | — | 3000 rpm | 2.32 kg2320 g |
| SKF6314 2RSJEMDeep groove ball bearing |
| 111 kN | 68 kN | — | 3000 rpm | 2.32 kg2320 g |
| SKF6314-2ZDeep groove ball bearing with seals or shields |
| 111 kN | 68 kN | 9500 rpm | 5000 rpm | 2.58 kg2580 g |
| SKF6314-2Z/C3Deep groove ball bearing with seals or shields |
| 111 kN | 68 kN | 9500 rpm | 5000 rpm | 2.58 kg2580 g |
| SKF6314-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 111 kN | 68 kN | 9500 rpm | 5000 rpm | 2.68 kg2680 g |
| SKF6314-2Z/C4Deep groove ball bearing with seals or shields |
| 111 kN | 68 kN | 9500 rpm | 5000 rpm | 2.61 kg2610 g |
| SKF6314-2Z/HC5C3S0WTHybrid ceramic deep groove ball bearing with shields |
| 104 kN | 68 kN | 11000 rpm | 6300 rpm | 2.43 kg2430 g |
| SKF6314 2ZJEMDeep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 5000 rpm | 2.32 kg2320 g |
| SKF6314-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 68 kN | — | 40 rpm | 2.55 kg2550 g |
| SKF6314/AXDDeep groove ball bearing |
| 130 kN | 68 kN | 9500 rpm | 6300 rpm | 2.55 kg2550 g |
| SKF6314/C3Deep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.49 kg2490 g |
| SKF6314/C3VL0241INSOCOAT® deep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.5 kg2500 g |
| SKF6314/C4Deep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.49 kg2490 g |
| SKF6314/C4HS0Deep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.49 kg2490 g |
| SKF6314/HC5C3S0Hybrid ceramic deep groove ball bearing |
| 104 kN | 68 kN | 11000 rpm | 7500 rpm | 2.17 kg2170 g |
| SKF6314 JEMDeep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.28 kg2280 g |
| SKF6314 MA/C3Deep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 9000 rpm | 3.06 kg3060 g |
| SKF6314 M/C3Deep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 9000 rpm | 3.03 kg3030 g |
| SKF6314 M/C3VL0241INSOCOAT® deep groove ball bearing |
| 104 kN | 68 kN | 9500 rpm | 9000 rpm | 2.92 kg2920 g |
| SKF6314 M/C4VL0241INSOCOAT® deep groove ball bearing |
| 104 kN | 68 kN | 9500 rpm | 9000 rpm | 2.92 kg2920 g |
| SKF6314 NRDeep groove ball bearing with snap ring |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.54 kg2540 g |
| SKF6314 NR/C3Deep groove ball bearing with snap ring |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.54 kg2540 g |
| SKF6314-RS1Deep groove ball bearing with seals or shields |
| 111 kN | 68 kN | — | 3000 rpm | 2.5 kg2500 g |
| SKF6314/VA201Deep groove ball bearing for high temperature applications |
| — | 68 kN | — | 40 rpm | 2.5 kg2500 g |
| SKF6314/W64Deep groove ball bearing |
| 111 kN | 68 kN | — | 2700 rpm | 2.55 kg2550 g |
| SKF6314-ZDeep groove ball bearing with seals or shields |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.52 kg2520 g |
| SKF6314-Z/C3Deep groove ball bearing with seals or shields |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.52 kg2520 g |
| SKF6314-Z/C3S1Deep groove ball bearing with seals or shields |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.31 kg2310 g |
| SKF6314-Z/HC5C3S0Hybrid ceramic deep groove ball bearing with shields |
| 104 kN | 68 kN | 11000 rpm | 7500 rpm | 2.2 kg2200 g |
| SKF6314 ZJEMDeep groove ball bearing |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.28 kg2280 g |
| SKF6314-ZNRDeep groove ball bearing with snap ring and integral sealing |
| 111 kN | 68 kN | 9500 rpm | 6300 rpm | 2.57 kg2570 g |
| FAG6314-2RSRDeep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.64 kg2640 g |
| FAG6314-2RSR-C3Deep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.64 kg2640 g |
| FAG6314-2RSR-L038Deep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.6 kg2600 g |
| FAG6314-2RSR-L038-C3Deep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.6 kg2600 g |
| FAG6314-2RSR-L138-C3Deep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.545 kg2545 g |
| FAG6314-2RSR-L140-C3Deep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.524 kg2524 g |
| FAG6314-2ZDeep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.6 kg2600 g |
| FAG6314-2Z-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.6 kg2600 g |
| FAG6314-2Z-C4Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.6 kg2600 g |
| FAG6314-2Z-L069-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.6 kg2600 g |
| FAG6314-2Z-L069-C4Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.6 kg2600 g |
| FAG6314-2Z-L100-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.61 kg2610 g |
| FAG6314-2Z-L140Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.524 kg2524 g |
| FAG6314-2Z-L140-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.524 kg2524 g |
| FAG6314-2Z-L195-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.61 kg2610 g |
| FAG6314-2Z-L207-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.61 kg2610 g |
| FAG6314-2Z-L237-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 5700 rpm | 2.6 kg2600 g |
| FAG6314-C2Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.496 kg2496 g |
| FAG6314-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.496 kg2496 g |
| FAG6314-C4Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.496 kg2496 g |
| FAG6314-H-2RSR-SN-C3>NDeep groove ball bearing |
| 104.13 kN | 68.04 kN | — | 2800 rpm | 2.58 kg2580 g |
| FAG6314-H-2RSR-SN>NDeep groove ball bearing |
| 104.13 kN | 68.04 kN | — | 2800 rpm | 2.58 kg2580 g |
| FAG6314-H-2Z-SN-C3>NDeep groove ball bearing |
| 104.13 kN | 68.04 kN | 6100 rpm | 5200 rpm | 2.56 kg2560 g |
| FAG6314-H-2Z-SN>NDeep groove ball bearing |
| 104.13 kN | 68.04 kN | 6100 rpm | 5200 rpm | 2.56 kg2560 g |
| FAG6314-H-SN-C3>NDeep groove ball bearing |
| 104.13 kN | 68.04 kN | 6100 rpm | 6100 rpm | 2.59 kg2590 g |
| FAG6314-H-SN>NDeep groove ball bearing |
| 104.13 kN | 68.04 kN | 6100 rpm | 6100 rpm | 2.59 kg2590 g |
| FAG6314-J20AADeep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.55 kg2550 g |
| FAG6314-J20AA-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.55 kg2550 g |
| FAG6314-J20ABDeep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.55 kg2550 g |
| FAG6314-J20AB-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.55 kg2550 g |
| FAG6314-J20CDeep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.55 kg2550 g |
| FAG6314-J20C-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.55 kg2550 g |
| FAG6314-J20GA-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.54 kg2540 g |
| FAG6314-MDeep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 2.985 kg2985 g |
| FAG6314-M-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 3 kg3000 g |
| FAG6314-M-C4Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 3 kg3000 g |
| FAG6314-M-J20AA-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 2.968 kg2968 g |
| FAG6314-M-J20AA-C4Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 3.02 kg3020 g |
| FAG6314-M-J20AB-C4Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 2.992 kg2992 g |
| FAG6314-M-J20GA-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 3.02 kg3020 g |
| FAG6314-M-J20GB-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 3.02 kg3020 g |
| FAG6314-M-J20GB-C4Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 8800 rpm | 3.02 kg3020 g |
| FAG6314-NDeep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.52 kg2520 g |
| FAG6314-N-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.52 kg2520 g |
| FAG6314-RSRDeep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.575 kg2575 g |
| FAG6314-RSR-C3Deep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.575 kg2575 g |
| FAG6314-RSR-J20AA-C3Deep groove ball bearing |
| 115 kN | 69 kN | — | 2800 rpm | 2.575 kg2575 g |
| FAG6314-ZDeep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.522 kg2522 g |
| FAG6314-Z-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.522 kg2522 g |
| FAG6314-Z-C4Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.522 kg2522 g |
| FAG6314-Z-NDeep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.55 kg2550 g |
| FAG6314-Z-N-C3Deep groove ball bearing |
| 115 kN | 69 kN | 6100 rpm | 6800 rpm | 2.545 kg2545 g |
| TIMKEN6314-2RSDeep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-2RS-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-2RS-C3/VSL609Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-2RS/VSL609Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-2RZDeep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.5 kg2500 g |
| TIMKEN6314-2RZ-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.5 kg2500 g |
| TIMKEN6314-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314M-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 3.17 kg3170 g |
| TIMKEN6314-NR-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.5 kg2500 g |
| TIMKEN6314-RSDeep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-RS-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.5 kg2500 g |
| TIMKEN6314-RS-C4Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.5 kg2500 g |
| TIMKEN6314/VSL609Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-ZDeep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-Z-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-Z-NR-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.5 kg2500 g |
| TIMKEN6314-ZZDeep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| TIMKEN6314-ZZ-C3Deep groove ball bearing |
| 104 kN | 68 kN | — | — | 2.52 kg2520 g |
| NSK6314DDUDeep groove ball bearing |
| 115 kN | 68 kN | — | — | — |
| NSK6314VVDeep groove ball bearing |
| 115 kN | 68 kN | — | — | — |
| NSK6314ZZDeep groove ball bearing |
| 115 kN | 68 kN | — | — | — |
| KOYO6314 2RSDeep groove ball bearing |
| 130 kN | 68.2 kN | — | 3000 rpmLimiting Speeds(Grease Lub.): 3000 min-1 | 2.52 kg2520 g |
| KOYO6314 2RUDeep groove ball bearing |
| 130 kN | 68.2 kN | — | 4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1 | 2.52 kg2520 g |
| KOYO6314NRDeep groove ball bearing |
| 130 kN | 68.2 kN | — | 4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1Limiting Speeds(Oil Lub.): 5400 min-1 | 2.52 kg2520 g |
| KOYO6314 ZZDeep groove ball bearing |
| 130 kN | 68.2 kN | — | 4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1 | 2.52 kg2520 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6314 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6314 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6314 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6314 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6314 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6314-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6314-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6314-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6314-2RS1/GJN | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6314 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6314-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6314-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6314-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6314-2Z/C4 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6314-2Z/HC5C3S0WT | Shield on both sides | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | Grease |
| SKF 6314 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6314-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6314/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6314/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6314/C3VL0241 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6314/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6314/C4HS0 | Without | Not recorded | C4H | Sheet metal | Bearing steel | None |
| SKF 6314/HC5C3S0 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6314 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6314 MA/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6314 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6314 M/C3VL0241 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6314 M/C4VL0241 | Without | Not recorded | C4 | Machined brass | Bearing steel | None |
| SKF 6314 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6314 NR/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6314-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6314/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6314/W64 | Without | Not recorded | CN | Sheet metal | Bearing steel | Solid Oil |
| SKF 6314-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6314-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6314-Z/C3S1 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6314-Z/HC5C3S0 | Shield on one side | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6314 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6314-ZNR | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6314-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6314-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6314-2RSR-L038 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6314-2RSR-L038-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6314-2RSR-L138-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6314-2RSR-L140-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6314-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6314-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6314-2Z-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6314-2Z-L069-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6314-2Z-L069-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6314-2Z-L100-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6314-2Z-L140 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6314-2Z-L140-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6314-2Z-L195-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L195 — Grease (L195/customer specific) |
| FAG 6314-2Z-L207-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6314-2Z-L237-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L237 — Grease (L237/customer specific) |
| FAG 6314-C2 | Without — Not sealed | PN — Normal (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-H-2RSR-SN-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6314-H-2RSR-SN>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6314-H-2Z-SN-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6314-H-2Z-SN>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6314-H-SN-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-H-SN>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-J20AB | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-J20AB-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-J20C | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-J20C-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-J20GA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-M-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-M-J20AA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-M-J20AB-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-M-J20GA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-M-J20GB-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-M-J20GB-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6314-N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-N-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-RSR | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-RSR-C3 | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-RSR-J20AA-C3 | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-Z-C4 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-Z-N | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6314-Z-N-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6314-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314M-C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 6314-NR-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-RS-C4 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6314-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6314DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6314VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6314ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6314 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6314 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6314NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6314 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6314
Deep groove ball bearing
View full technical record →FAG6314
Deep groove ball bearing
View full technical record →TIMKEN6314
Deep groove ball bearing
View full technical record →KOYO6314
Deep groove ball bearing
View full technical record →NSK6314
Deep groove ball bearing
View full technical record →TIMKEN6314-2RS
Deep groove ball bearing
View full technical record →KOYO6314 2RS
Deep groove ball bearing
View full technical record →SKF6314-2RS1
Deep groove ball bearing with seals or shields
View full technical record →SKF6314-2RS1/C3
Deep groove ball bearing with seals or shields
View full technical record →SKF6314-2RS1/C3GJN
Deep groove ball bearing with seals or shields
View full technical record →SKF6314-2RS1/GJN
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6314-2RS-C3
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.