Find · understand · compare

6312 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6312. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

6312 dimensions and recorded technical data

The recorded 6312 base designation measures 60×130×31 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO, NTN. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 143 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6312

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6312-Z/C3 — 3 dimension fields

Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	60.0 mm
Outside diameter	Not supplied separately	130.0 mm
Width	Not supplied separately	31.0 mm

Open the complete SKF 6312-Z/C3 record →

SKF 6312/C3 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	60.0 mm
Outside diameter	Not supplied separately	130.0 mm
Width	Not supplied separately	31.0 mm

Open the complete SKF 6312/C3 record →

SKF 6312 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	60 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.012 to 0 mm
Outside diameter	D	130 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.015 to 0 mm
Width	B	31 mm
Deviation limits of ring width	t ΔBs	-0.1 to 0 mm
Shoulder diameter	d 1	≈ 81.86 mm
Recess diameter	D 2	≈ 112.2 mm
Chamfer dimension	r 1,2	min. 2.1 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 72 mm
Diameter of housing abutment	D a	max. 118 mm
Radius of shaft or housing fillet	r a	max. 2 mm

Open the complete SKF 6312 record →

FAG 6312 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	60 mm
Outside diameter	D	130 mm
Width	B	31 mm
Minimum chamfer dimension	rmin	2.1 mm
Shoulder diameter outer ring	D1	108.62 mm
Caliber diameter outer ring	D2	113.14 mm
Shoulder diameter inner ring	d1	81.25 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	72 mm
Maximum diameter of housing shoulder	Da max	118 mm
Maximum fillet radius	ra max	2.1 mm

Open the complete FAG 6312 record →

FAG 6312-C3 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	60 mm
Outside diameter	D	130 mm
Width	B	31 mm
Minimum chamfer dimension	rmin	2.1 mm
Shoulder diameter outer ring	D1	108.62 mm
Caliber diameter outer ring	D2	113.14 mm
Shoulder diameter inner ring	d1	81.25 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	72 mm
Maximum diameter of housing shoulder	Da max	118 mm
Maximum fillet radius	ra max	2.1 mm

Open the complete FAG 6312-C3 record →

FAG 6312-Z-C3 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	60 mm
Outside diameter	D	130 mm
Width	B	31 mm
Minimum chamfer dimension	rmin	2.1 mm
Shoulder diameter outer ring	D1	108.62 mm
Caliber diameter outer ring	D2	113.14 mm
Shoulder diameter inner ring	d1	81.25 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	72 mm
Maximum diameter of housing shoulder	Da max	118 mm
Maximum fillet radius	ra max	2.1 mm

Open the complete FAG 6312-Z-C3 record →

KOYO 6312 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	60 mm
Outside diameter	D	130 mm
Width	B	31 mm

Open the complete KOYO 6312 record →

KOYO 6312 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	60 mm
Outside diameter	D	130 mm
Width	B	31 mm

Open the complete KOYO 6312 2RS record →

KOYO 6312 ZZ — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	60 mm
Outside diameter	D	130 mm
Width	B	31 mm

Open the complete KOYO 6312 ZZ record →

TIMKEN 6312-Z-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	60 mm
O.D. (D)	D	130 mm / 5.118 in
Width (B)	B	31 mm / 1.221 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	2.1 mm / 0.083 in

Open the complete TIMKEN 6312-Z-C3 record →

TIMKEN 6312-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	60 mm
O.D. (D)	D	130 mm / 5.118 in
Width (B)	B	31 mm / 1.221 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	2.1 mm / 0.083 in

Open the complete TIMKEN 6312-C3 record →

TIMKEN 6312-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	60 mm
O.D. (D)	D	130 mm / 5.118 in
Width (B)	B	31 mm / 1.221 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	2.1 mm / 0.083 in

Open the complete TIMKEN 6312-2RS record →

TIMKEN 6312-ZZ-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	60 mm
O.D. (D)	D	130 mm / 5.118 in
Width (B)	B	31 mm / 1.221 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	2.1 mm / 0.083 in

Open the complete TIMKEN 6312-ZZ-C3 record →

TIMKEN 6312-ZZ — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	60 mm
O.D. (D)	D	130 mm / 5.118 in
Width (B)	B	31 mm / 1.221 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	2.1 mm / 0.083 in

Open the complete TIMKEN 6312-ZZ record →

Check shaft and hole fit →Search measured dimensions →

Exact designation reference

Catalogue parameters for 6312

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

SKF 6312 FAG 6312 KOYO 6312

SKF 6312 — 45 recorded parameters

Deep groove ball bearing

Reference: SKF product catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	Not separately recorded	60.0 mm
Outside diameter	Not separately recorded	130.0 mm
Width	Not separately recorded	31.0 mm

Performance

Parameter	Source symbol	Recorded value
Basic dynamic load rating	Not separately recorded	85.2 kN
Basic static load rating	Not separately recorded	52.0 kN
Reference speed	Not separately recorded	11000.0 r/min
Limiting speed	Not separately recorded	7000.0 r/min
SKF performance class	Not separately recorded	SKF Explorer

Properties

Parameter	Source symbol	Recorded value
Filling slots	Not separately recorded	Without
Number of rows	Not separately recorded	1
Locating feature, bearing outer ring	Not separately recorded	Without
Bore type	Not separately recorded	Cylindrical
Cage	Not separately recorded	Sheet metal
Matched arrangement	Not separately recorded	No
Radial internal clearance	Not separately recorded	CN
Material, bearing	Not separately recorded	Bearing steel
Coating	Not separately recorded	Without
Sealing	Not separately recorded	Without
Relubrication feature	Not separately recorded	Without
Indicative carbon footprint for new product	Not separately recorded	6.2 kg CO 2 e

Logistics

Parameter	Source symbol	Recorded value
Product net weight	Not separately recorded	1.67 kg

Engineering — Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	60 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.012 to 0 mm
Outside diameter	D	130 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.015 to 0 mm
Width	B	31 mm
Deviation limits of ring width	t ΔBs	-0.1 to 0 mm
Shoulder diameter	d 1	≈ 81.86 mm
Recess diameter	D 2	≈ 112.2 mm
Chamfer dimension	r 1,2	min. 2.1 mm
ISO tolerance class for dimensions	Not separately recorded	P6 and tighter width tolerance

Engineering — Abutment dimensions

Parameter	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 72 mm
Diameter of housing abutment	D a	max. 118 mm
Radius of shaft or housing fillet	r a	max. 2 mm

Engineering — Calculation data

Parameter	Source symbol	Recorded value
SKF performance class	Not separately recorded	SKF Explorer
Basic dynamic load rating	C	85.2 kN
Basic static load rating	C 0	52 kN
Fatigue load limit	P u	2.2 kN
Reference speed	Not separately recorded	11000 r/min
Limiting speed	Not separately recorded	7000 r/min
Minimum load factor	k r	0.03
Calculation factor	f 0	13.1

Engineering — Tolerances of run-out

Parameter	Source symbol	Recorded value
Range of section height at inner ring of assembled bearing	t Kia	20 µm
Range of section height at outer ring of assembled bearing	t Kea	40 µm
ISO tolerance class for geometrical tolerances	Not separately recorded	Normal

Open SKF 6312 product record →

FAG 6312 — 48 recorded parameters

Deep groove ball bearing

Reference: Schaeffler medias — FAG; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Main Dimensions & Performance Data

Parameter	Source symbol	Recorded value
Bore diameter	d	60 mm
Bore diameter	d	2.362 in
Outside diameter	D	130 mm
Outside diameter	D	5.118 in
Width	B	31 mm
Width	B	1.22 in
Basic dynamic load rating, radial	Cr	89,000 N
Basic dynamic load rating, radial	Cr	20,008.993 lbf
Basic static load rating, radial	C0r	52,000 N
Basic static load rating, radial	C0r	11,690.647 lbf
Fatigue load limit, radial	Cur	3,600 N
Fatigue load limit, radial	Cur	809.353 lbf
Limiting speed	nG	7,900 1/min
Reference speed	nϑr	6,700 1/min
Mass	≈m	1.683 kg
Mass	≈m	3.71 lbs

Mounting dimensions

Parameter	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	72 mm
Minimum diameter shaft shoulder	da min	2.835 in
Maximum diameter of housing shoulder	Da max	118 mm
Maximum diameter of housing shoulder	Da max	4.646 in
Maximum fillet radius	ra max	2.1 mm
Maximum fillet radius	ra max	0.083 in

Dimensions

Parameter	Source symbol	Recorded value
Minimum chamfer dimension	rmin	2.1 mm
Minimum chamfer dimension	rmin	0.083 in
Shoulder diameter outer ring	D1	108.62 mm
Shoulder diameter outer ring	D1	4.276 in
Caliber diameter outer ring	D2	113.14 mm
Caliber diameter outer ring	D2	4.454 in
Shoulder diameter inner ring	d1	81.25 mm
Shoulder diameter inner ring	d1	3.199 in

Temperature range

Parameter	Source symbol	Recorded value
Operating temperature min.	Tmin	-30 °C
Operating temperature min.	Tmin	-22 °F
Operating temperature max.	Tmax	150 °C
Operating temperature max.	Tmax	302 °F

Calculation factors

Parameter	Source symbol	Recorded value
Calculation factor	f0	13.2

Product characteristics

Parameter	Source symbol	Recorded value
Type of Seal	Without	Not sealed
Cage	JN	Steel sheet metal
Tolerance class	PN	Normal (ISO 492:2023)
Dimensional / heat stabilization	S0	Rings dimensional stabilized up to 150°
Lubricant	Without	Bearing not greased
Radial internal clearance	CN (Group N)	Normal internal clearance
Bore type	Z	Cylindrical

Capabilities & suitability

Parameter	Source symbol	Recorded value
Radial load capacity	Not separately recorded	Yes
Axial load capacity in one direction	Not separately recorded	Yes
Axial load capacity in both directions	Not separately recorded	Yes
Suitable for grease lubrication	Not separately recorded	Yes
Suitable for oil lubrication	Not separately recorded	Yes
Unsealed design	Not separately recorded	Yes

Open FAG 6312 product record →

KOYO 6312 — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	60 mm
D	Not separately recorded	130 mm
B	Not separately recorded	31 mm
R(Min.)	Not separately recorded	2.1 mm
Basic Load Ratings : Cr	Not separately recorded	102 kN
Basic Load Ratings : C0R	Not separately recorded	52.2 kN
Fatigue Load Limit : Cu	Not separately recorded	3.95 kN
Factor : F0	Not separately recorded	13.2
Limiting Speeds(Grease Lub.)	Not separately recorded	5200 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	6200 min-1
Da(Min.)	Not separately recorded	71 mm
Da(Max.)	Not separately recorded	119 mm
Ra(Max.)	Not separately recorded	2 mm
Mass(Refer.)	Not separately recorded	1.70 kg

Open KOYO 6312 product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6312Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.67 kg1670 g
FAG6312Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.683 kg1683 g
TIMKEN6312Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
NSK6312Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Bearing width (B) 31 mm 1.220472 in	90 kN	52 kN	—	—	1.72 kg1720 g
KOYO6312Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	102 kN	52.2 kN	—	5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6200 min-1	1.7 kg1700 g
NTN6312Deep groove ball bearing	Internal diameter (d) 60 mm 2.362205 in External diameter (D) 130 mm 5.11811 in Bearing/Inner ring width (B) 31 mm 1.220472 in	90.5 kN	52 kN	—	—	1.73 kg1730 g
SKF6312-2RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	—	3400 rpm	1.72 kg1720 g
SKF6312-2RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	3400 rpm	1.72 kg1720 g
SKF6312-2RS1/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	3400 rpm	1.73 kg1730 g
SKF6312-2RS1/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.9 kN	52 kN	—	3400 rpm	1.51 kg1510 g
SKF6312-2RSHDeep groove ball bearing with seals	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	—	3400 rpm	1.76 kg1760 g
SKF6312 2RSJEMDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	—	3400 rpm	1.74 kg1740 g
SKF6312 2RSNRJEMDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	—	3400 rpm	1.75 kg1750 g
SKF6312-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	5600 rpm	1.73 kg1730 g
SKF6312-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	5600 rpm	1.73 kg1730 g
SKF6312-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	5600 rpm	1.74 kg1740 g
SKF6312-2Z/C3WTDeep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	5600 rpm	1.73 kg1730 g
SKF6312-2Z/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	5600 rpm	1.75 kg1750 g
SKF6312-2Z/C4GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	—	—	1.74 kg1740 g
SKF6312-2Z/HC5C3GJNHybrid ceramic deep groove ball bearing with seals on both sides	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.9 kN	52 kN	13000 rpm	7000 rpm	1.74 kg1740 g
SKF6312-2Z/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.9 kN	52 kN	—	3400 rpm	1.78 kg1780 g
SKF6312 2ZJEMDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	5600 rpm	1.73 kg1730 g
SKF6312 2ZNRJEMDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	5600 rpm	1.8 kg1800 g
SKF6312-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	—	52 kN	—	40 rpm	1.69 kg1690 g
SKF6312-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	—	52 kN	—	90 rpm	1.73 kg1730 g
SKF6312/AXDDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	104 kN	52 kN	11000 rpm	7000 rpm	1.72 kg1720 g
SKF6312/C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.67 kg1670 g
SKF6312/C3S0Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.69 kg1690 g
SKF6312/C3VL0241INSOCOAT® deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.67 kg1670 g
SKF6312/C4Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.67 kg1670 g
SKF6312/C4HDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.67 kg1670 g
SKF6312/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.9 kN	52 kN	13000 rpm	8500 rpm	1.46 kg1460 g
SKF6312 JEMDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.69 kg1690 g
SKF6312 M/C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	10000 rpm	2.02 kg2020 g
SKF6312 M/C3VL0241INSOCOAT® deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	10000 rpm	1.9 kg1900 g
SKF6312 M/C4VL0241INSOCOAT® deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	10000 rpm	1.9 kg1900 g
SKF6312 M/HC5C4S0Hybrid ceramic deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.9 kN	52 kN	13000 rpm	10000 rpm	1.85 kg1850 g
SKF6312 NRDeep groove ball bearing with snap ring	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.74 kg1740 g
SKF6312 NR/C3Deep groove ball bearing with snap ring	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.74 kg1740 g
SKF6312 NRJEMDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.74 kg1740 g
SKF6312-RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	—	3400 rpm	1.69 kg1690 g
SKF6312-RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	—	3400 rpm	1.69 kg1690 g
SKF6312-RS1Z/C4GJN4Deep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	—	3400 rpm	1.74 kg1740 g
SKF6312 RSJEMDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	—	3400 rpm	1.7 kg1700 g
SKF6312/VA201Deep groove ball bearing for high temperature applications	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	—	52 kN	—	50 rpm	1.69 kg1690 g
SKF6312-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.69 kg1690 g
SKF6312-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.69 kg1690 g
SKF6312-Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.71 kg1710 g
SKF6312-Z/C3S0Deep groove ball bearing with seals or shields	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.69 kg1690 g
SKF6312-Z/HC5C3Hybrid ceramic deep groove ball bearing with seals on both sides	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.9 kN	52 kN	13000 rpm	8500 rpm	1.48 kg1480 g
SKF6312 ZJEMDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.73 kg1730 g
SKF6312-ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	85.2 kN	52 kN	11000 rpm	7000 rpm	1.76 kg1760 g
FAG6312-2RSRDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	3300 rpm	1.79 kg1790 g
FAG6312-2RSR-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	3300 rpm	1.79 kg1790 g
FAG6312-2RSR-L140Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	3300 rpm	1.737 kg1737 g
FAG6312-2RSR-L140-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	3300 rpm	1.737 kg1737 g
FAG6312-2ZDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.76 kg1760 g
FAG6312-2Z-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.76 kg1760 g
FAG6312-2Z-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.76 kg1760 g
FAG6312-2Z-L069-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.676 kg1676 g
FAG6312-2Z-L140Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.737 kg1737 g
FAG6312-2Z-L140-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.737 kg1737 g
FAG6312-2Z-L207-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.737 kg1737 g
FAG6312-2Z-L237-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.781 kg1781 g
FAG6312-2Z-NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	6700 rpm	1.728 kg1728 g
FAG6312-CDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.681 kg1681 g
FAG6312-C-2HRSDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	4800 rpm	1.703 kg1703 g
FAG6312-C-2HRS-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	4800 rpm	1.703 kg1703 g
FAG6312-C-2HRS-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	4800 rpm	1.703 kg1703 g
FAG6312-C-2HRS-L138-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	4800 rpm	1.71 kg1710 g
FAG6312-C-2HRS-L140-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	4800 rpm	1.703 kg1703 g
FAG6312-C-2HRS-L237-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	4800 rpm	1.71 kg1710 g
FAG6312-C-2ZDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	6700 rpm	1.697 kg1697 g
FAG6312-C-2Z-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	6700 rpm	1.697 kg1697 g
FAG6312-C-2Z-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	6700 rpm	1.697 kg1697 g
FAG6312-C-2Z-L038-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	6700 rpm	1.699 kg1699 g
FAG6312-C-2Z-L138-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	6700 rpm	1.699 kg1699 g
FAG6312-C-2Z-L237-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	6700 rpm	1.699 kg1699 g
FAG6312-C-2Z-L408-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	6700 rpm	1.698 kg1698 g
FAG6312-C-2Z-NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	6700 rpm	1.71 kg1710 g
FAG6312-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.683 kg1683 g
FAG6312-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.683 kg1683 g
FAG6312-C-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.681 kg1681 g
FAG6312-C-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.679 kg1679 g
FAG6312-C-HRSDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	4800 rpm	1.73 kg1730 g
FAG6312-C-HRS-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	4800 rpm	1.73 kg1730 g
FAG6312-C-MDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	10300 rpm	1.93 kg1930 g
FAG6312-C-M-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	10300 rpm	1.93 kg1930 g
FAG6312-C-M-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	10300 rpm	1.93 kg1930 g
FAG6312-C-NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.68 kg1680 g
FAG6312-C-N-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.646 kg1646 g
FAG6312-C-ZDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.65 kg1650 g
FAG6312-C-Z-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.65 kg1650 g
FAG6312-C-Z-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.65 kg1650 g
FAG6312-C-Z-NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	7400 rpm	7900 rpm	1.6 kg1600 g
FAG6312-H-2RSR-SN-C3>NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.91 kN	52.14 kN	—	3250 rpm	1.73 kg1730 g
FAG6312-H-2RSR-SN>NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.91 kN	52.14 kN	—	3250 rpm	1.73 kg1730 g
FAG6312-H-2Z-SN-C3>NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.91 kN	52.14 kN	6600 rpm	6000 rpm	1.71 kg1710 g
FAG6312-H-2Z-SN>NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.91 kN	52.14 kN	6600 rpm	6000 rpm	1.71 kg1710 g
FAG6312-H-SN-C3>NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.91 kN	52.14 kN	6600 rpm	7100 rpm	1.73 kg1730 g
FAG6312-H-SN>NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.91 kN	52.14 kN	6600 rpm	7100 rpm	1.73 kg1730 g
FAG6312-H-Z-SN>NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	81.91 kN	52.14 kN	6600 rpm	6000 rpm	1.71 kg1710 g
FAG6312-J20AADeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.75 kg1750 g
FAG6312-J20AA-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.65 kg1650 g
FAG6312-J20AA-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.65 kg1650 g
FAG6312-J20ABDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.72 kg1720 g
FAG6312-J20AB-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.64 kg1640 g
FAG6312-J20GA-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.71 kg1710 g
FAG6312-MDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	10300 rpm	2.071 kg2071 g
FAG6312-M-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	10300 rpm	2.071 kg2071 g
FAG6312-M-J20AADeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	10300 rpm	2 kg2000 g
FAG6312-M-J20AA-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	10300 rpm	2 kg2000 g
FAG6312-RSR-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	3300 rpm	1.75 kg1750 g
FAG6312-ZDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.69 kg1690 g
FAG6312-Z-C3Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.69 kg1690 g
FAG6312-Z-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.69 kg1690 g
FAG6312-Z-NDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	6700 rpm	7900 rpm	1.71 kg1710 g
FAG6312-Z-RSR-L100-C4Deep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	89 kN	52 kN	—	3300 rpm	1.76 kg1760 g
TIMKEN6312-2RSDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-2RS-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-2RS-NRDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-2RZDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.7 kg1700 g
TIMKEN6312-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312M-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	2.14 kg2140 g
TIMKEN6312-NRDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-NR-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.7 kg1700 g
TIMKEN6312-RSDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-RS-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.7 kg1700 g
TIMKEN6312-ZDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-Z-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-Z-NRDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.7 kg1700 g
TIMKEN6312-Z-NR-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.7 kg1700 g
TIMKEN6312-ZZDeep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-ZZ-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
TIMKEN6312-ZZ-NR-C3Deep groove ball bearing	Recorded bore (d) 60 mm 2.362205 in Recorded outside dimension (D) 130 mm 5.11811 in Catalogue width (symbol unverified) 31 mm 1.220472 in	81.8 kN	51.8 kN	—	—	1.73 kg1730 g
NSK6312DDUDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Bearing width (B) 31 mm 1.220472 in	90 kN	52 kN	—	—	—
NSK6312VVDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Bearing width (B) 31 mm 1.220472 in	90 kN	52 kN	—	—	—
NSK6312ZZDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Bearing width (B) 31 mm 1.220472 in	90 kN	52 kN	—	—	—
KOYO6312 2RSDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	102 kN	52.2 kN	—	3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1	1.7 kg1700 g
KOYO6312 2RUDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	102 kN	52.2 kN	—	5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1	1.7 kg1700 g
KOYO6312NRDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	102 kN	52.2 kN	—	5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1Limiting Speeds(Oil Lub.): 6200 min-1	1.7 kg1700 g
KOYO6312 ZZDeep groove ball bearing	Bore diameter (d) 60 mm 2.362205 in Outside diameter (D) 130 mm 5.11811 in Width (B) 31 mm 1.220472 in	102 kN	52.2 kN	—	5200 rpmLimiting Speeds(Grease Lub.): 5200 min-1	1.7 kg1700 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6312	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 6312	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6312	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6312	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6312	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NTN 6312	open	Not recorded	CN	pressed steel cage	Not recorded	Not recorded
SKF 6312-2RS1	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6312-2RS1/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6312-2RS1/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6312-2RS1/HC5C3WT	Seal on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6312-2RSH	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6312 2RSJEM	Seal on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6312 2RSNRJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6312-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6312-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6312-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6312-2Z/C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6312-2Z/C4	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6312-2Z/C4GJN	Shield on both sides	Not recorded	Not recorded	Sheet metal	Bearing steel	Grease
SKF 6312-2Z/HC5C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6312-2Z/HC5C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6312 2ZJEM	Shield on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6312 2ZNRJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6312-2Z/VA208	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6312-2Z/VA228	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6312/AXD	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6312/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312/C3S0	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312/C3VL0241	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312/C4	Without	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6312/C4H	Without	Not recorded	C4H	Sheet metal	Bearing steel	None
SKF 6312/HC5C3	Without	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6312 JEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6312 M/C3	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6312 M/C3VL0241	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6312 M/C4VL0241	Without	Not recorded	C4	Machined brass	Bearing steel	None
SKF 6312 M/HC5C4S0	Without	Not recorded	C4	Machined brass	Hybrid (ceramic balls)	None
SKF 6312 NR	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6312 NR/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312 NRJEM	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312-RS1	Seal on one side	P6 and tighter width tolerance	CN	Not recorded	Bearing steel	None
SKF 6312-RS1/C3	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312-RS1Z/C4GJN4	Seal on one side, shield on the other	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6312 RSJEM	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312/VA201	Without	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6312-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6312-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312-Z/C3GJN	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312-Z/C3S0	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6312-Z/HC5C3	Shield on one side	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6312 ZJEM	Shield on one side	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6312-ZNR	Shield on one side	P6 and tighter width tolerance	CN	Not recorded	Bearing steel	None
FAG 6312-2RSR	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-2RSR-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-2RSR-L140	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6312-2RSR-L140-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6312-2Z	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-2Z-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-2Z-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-2Z-L069-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6312-2Z-L140	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6312-2Z-L140-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6312-2Z-L207-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6312-2Z-L237-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L237 — Grease (L237/customer specific)
FAG 6312-2Z-N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-C	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-2HRS	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-C-2HRS-C3	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-C-2HRS-C4	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-C-2HRS-L138-C3	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6312-C-2HRS-L140-C3	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6312-C-2HRS-L237-C3	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L237 — Grease (L237/customer specific)
FAG 6312-C-2Z	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-C-2Z-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-C-2Z-C4	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-C-2Z-L038-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6312-C-2Z-L138-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6312-C-2Z-L237-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L237 — Grease (L237/customer specific)
FAG 6312-C-2Z-L408-C3	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L408 — Grease (L408/customer specific)
FAG 6312-C-2Z-N	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6312-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-C4	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-HRS	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-HRS-C3	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-M	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6312-C-M-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6312-C-M-C4	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6312-C-N	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-N-C3	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-Z	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-Z-C3	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-Z-C4	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-C-Z-N	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-H-2RSR-SN-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6312-H-2RSR-SN>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6312-H-2Z-SN-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6312-H-2Z-SN>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6312-H-SN-C3>N	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-H-SN>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-H-Z-SN>N	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-J20AA	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-J20AA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-J20AA-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-J20AB	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-J20AB-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-J20GA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-M	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6312-M-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6312-M-J20AA	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6312-M-J20AA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6312-RSR-C3	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-Z	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-Z-C3	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-Z-C4	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-Z-N	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6312-Z-RSR-L100-C4	Z-RSR — Non-contact shield on one Side, Contact seal on the other side	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
TIMKEN 6312-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-2RS-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312M-C3	Open	Not recorded	Not recorded	Brass cage	Not recorded	Not recorded
TIMKEN 6312-NR	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-NR-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-Z-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-Z-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6312-ZZ-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6312DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6312VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6312ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6312 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6312 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6312NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6312 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →SKF

6312-2RS1/HC5C3WT

Hybrid ceramic deep groove ball bearing with seals on both sides

View full technical record →

Filter all 143 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6312 dimensions and recorded technical data

Read the original dimensions for 6312

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Catalogue parameters for 6312

Dimensions

Performance

Properties

Logistics

Engineering — Dimensions

Engineering — Abutment dimensions

Engineering — Calculation data

Engineering — Tolerances of run-out

Main Dimensions & Performance Data

Mounting dimensions

Dimensions

Temperature range

Calculation factors

Product characteristics

Capabilities & suitability

Technical Data

How to compare these values

Related prefix matches — other model numbers may appear

6312

6312

6312

6312

6312

6312

6312-2RS

6312 2RS

6312-2RS1

6312-2RS1/C3

6312-2RS1/C3GJN

6312-2RS1/HC5C3WT

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.