Find · understand · compare

6309 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6309. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

6309 dimensions and recorded technical data

The recorded 6309 base designation measures 45×100×25 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO, NACHI, NTN. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 185 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6309

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6309-2Z/C3 — 3 dimension fields

Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	45.0 mm
Outside diameter	Not supplied separately	100.0 mm
Width	Not supplied separately	25.0 mm

Open the complete SKF 6309-2Z/C3 record →

SKF 6309-Z/C3 — 3 dimension fields

Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	45.0 mm
Outside diameter	Not supplied separately	100.0 mm
Width	Not supplied separately	25.0 mm

Open the complete SKF 6309-Z/C3 record →

SKF 6309-Z — 13 dimension fields

Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.01 to 0 mm
Outside diameter	D	100 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	25 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 62.18 mm
Recess diameter	D 2	≈ 86.7 mm
Chamfer dimension	r 1,2	min. 1.5 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 54 mm
Diameter of shaft abutment	d a	max. 62.1 mm
Diameter of housing abutment	D a	max. 91 mm
Radius of shaft or housing fillet	r a	max. 1.5 mm

Open the complete SKF 6309-Z record →

SKF 6309/C3 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	45.0 mm
Outside diameter	Not supplied separately	100.0 mm
Width	Not supplied separately	25.0 mm

Open the complete SKF 6309/C3 record →

SKF 6309 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.01 to 0 mm
Outside diameter	D	100 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	25 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 62.18 mm
Recess diameter	D 2	≈ 86.7 mm
Chamfer dimension	r 1,2	min. 1.5 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 54 mm
Diameter of housing abutment	D a	max. 91 mm
Radius of shaft or housing fillet	r a	max. 1.5 mm

Open the complete SKF 6309 record →

FAG 6309 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Outside diameter	D	100 mm
Width	B	25 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	83.3 mm
Caliber diameter outer ring	D2	85.64 mm
Shoulder diameter inner ring	d1	62.26 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	54 mm
Maximum diameter of housing shoulder	Da max	91 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6309 record →

FAG 6309-C3 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Outside diameter	D	100 mm
Width	B	25 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	83.3 mm
Caliber diameter outer ring	D2	86.37 mm
Shoulder diameter inner ring	d1	62.26 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	54 mm
Maximum diameter of housing shoulder	Da max	91 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6309-C3 record →

FAG 6309-Z — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Outside diameter	D	100 mm
Width	B	25 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	83.3 mm
Caliber diameter outer ring	D2	85.64 mm
Shoulder diameter inner ring	d1	62 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	54 mm
Maximum diameter of housing shoulder	Da max	91 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6309-Z record →

FAG 6309-Z-C3 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Outside diameter	D	100 mm
Width	B	25 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	83.3 mm
Caliber diameter outer ring	D2	85.64 mm
Shoulder diameter inner ring	d1	62 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	54 mm
Maximum diameter of housing shoulder	Da max	91 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6309-Z-C3 record →

FAG 6309-2Z-C3 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Outside diameter	D	100 mm
Width	B	25 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	83.3 mm
Caliber diameter outer ring	D2	85.64 mm
Shoulder diameter inner ring	d1	62 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	54 mm
Maximum diameter of housing shoulder	Da max	91 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6309-2Z-C3 record →

KOYO 6309 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Outside diameter	D	100 mm
Width	B	25 mm

Open the complete KOYO 6309 record →

KOYO 6309 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Outside diameter	D	100 mm
Width	B	25 mm

Open the complete KOYO 6309 2RS record →

KOYO 6309 ZZ — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	45 mm
Outside diameter	D	100 mm
Width	B	25 mm

Open the complete KOYO 6309 ZZ record →

TIMKEN 6309-RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309-RS record →

TIMKEN 6309-Z — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309-Z record →

TIMKEN 6309-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309-C3 record →

TIMKEN 6309 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309 record →

TIMKEN 6309-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309-2RS record →

TIMKEN 6309-ZZ-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309-ZZ-C3 record →

TIMKEN 6309-ZZ — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309-ZZ record →

TIMKEN 6309-Z-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309-Z-C3 record →

TIMKEN 6309Z — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	45 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	25 mm / 0.984 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6309Z record →

Check shaft and hole fit →Search measured dimensions →

Exact designation reference

Catalogue parameters for 6309

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

SKF 6309 FAG 6309 KOYO 6309

SKF 6309 — 45 recorded parameters

Deep groove ball bearing

Reference: SKF product catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	Not separately recorded	45.0 mm
Outside diameter	Not separately recorded	100.0 mm
Width	Not separately recorded	25.0 mm

Performance

Parameter	Source symbol	Recorded value
Basic dynamic load rating	Not separately recorded	55.3 kN
Basic static load rating	Not separately recorded	31.5 kN
Reference speed	Not separately recorded	15000.0 r/min
Limiting speed	Not separately recorded	9500.0 r/min
SKF performance class	Not separately recorded	SKF Explorer

Properties

Parameter	Source symbol	Recorded value
Filling slots	Not separately recorded	Without
Number of rows	Not separately recorded	1
Locating feature, bearing outer ring	Not separately recorded	Without
Bore type	Not separately recorded	Cylindrical
Cage	Not separately recorded	Sheet metal
Matched arrangement	Not separately recorded	No
Radial internal clearance	Not separately recorded	CN
Material, bearing	Not separately recorded	Bearing steel
Coating	Not separately recorded	Without
Sealing	Not separately recorded	Without
Relubrication feature	Not separately recorded	Without
Indicative carbon footprint for new product	Not separately recorded	3.0 kg CO 2 e

Logistics

Parameter	Source symbol	Recorded value
Product net weight	Not separately recorded	0.817 kg

Engineering — Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	45 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.01 to 0 mm
Outside diameter	D	100 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	25 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 62.18 mm
Recess diameter	D 2	≈ 86.7 mm
Chamfer dimension	r 1,2	min. 1.5 mm
ISO tolerance class for dimensions	Not separately recorded	P6 and tighter width tolerance

Engineering — Abutment dimensions

Parameter	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 54 mm
Diameter of housing abutment	D a	max. 91 mm
Radius of shaft or housing fillet	r a	max. 1.5 mm

Engineering — Calculation data

Parameter	Source symbol	Recorded value
SKF performance class	Not separately recorded	SKF Explorer
Basic dynamic load rating	C	55.3 kN
Basic static load rating	C 0	31.5 kN
Fatigue load limit	P u	1.34 kN
Reference speed	Not separately recorded	15000 r/min
Limiting speed	Not separately recorded	9500 r/min
Minimum load factor	k r	0.03
Calculation factor	f 0	13

Engineering — Tolerances of run-out

Parameter	Source symbol	Recorded value
Range of section height at inner ring of assembled bearing	t Kia	10 µm
Range of section height at outer ring of assembled bearing	t Kea	18 µm
ISO tolerance class for geometrical tolerances	Not separately recorded	P6

Open SKF 6309 product record →

FAG 6309 — 48 recorded parameters

Deep groove ball bearing

Reference: Schaeffler medias — FAG; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Main Dimensions & Performance Data

Parameter	Source symbol	Recorded value
Bore diameter	d	45 mm
Bore diameter	d	1.772 in
Outside diameter	D	100 mm
Outside diameter	D	3.937 in
Width	B	25 mm
Width	B	0.984 in
Basic dynamic load rating, radial	Cr	56,000 N
Basic dynamic load rating, radial	Cr	12,589.928 lbf
Basic static load rating, radial	C0r	31,500 N
Basic static load rating, radial	C0r	7,081.835 lbf
Fatigue load limit, radial	Cur	2,240 N
Fatigue load limit, radial	Cur	503.597 lbf
Limiting speed	nG	9,500 1/min
Reference speed	nϑr	8,200 1/min
Mass	≈m	0.814 kg
Mass	≈m	1.795 lbs

Mounting dimensions

Parameter	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	54 mm
Minimum diameter shaft shoulder	da min	2.126 in
Maximum diameter of housing shoulder	Da max	91 mm
Maximum diameter of housing shoulder	Da max	3.583 in
Maximum fillet radius	ra max	1.5 mm
Maximum fillet radius	ra max	0.059 in

Dimensions

Parameter	Source symbol	Recorded value
Minimum chamfer dimension	rmin	1.5 mm
Minimum chamfer dimension	rmin	0.059 in
Shoulder diameter outer ring	D1	83.3 mm
Shoulder diameter outer ring	D1	3.28 in
Caliber diameter outer ring	D2	85.64 mm
Caliber diameter outer ring	D2	3.372 in
Shoulder diameter inner ring	d1	62.26 mm
Shoulder diameter inner ring	d1	2.451 in

Temperature range

Parameter	Source symbol	Recorded value
Operating temperature min.	Tmin	-30 °C
Operating temperature min.	Tmin	-22 °F
Operating temperature max.	Tmax	150 °C
Operating temperature max.	Tmax	302 °F

Calculation factors

Parameter	Source symbol	Recorded value
Calculation factor	f0	12.9

Product characteristics

Parameter	Source symbol	Recorded value
Type of Seal	Without	Not sealed
Cage	JN	Steel sheet metal
Tolerance class	PN	Normal (ISO 492:2023)
Dimensional / heat stabilization	S0	Rings dimensional stabilized up to 150°
Lubricant	Without	Bearing not greased
Radial internal clearance	CN (Group N)	Normal internal clearance
Bore type	Z	Cylindrical

Capabilities & suitability

Parameter	Source symbol	Recorded value
Radial load capacity	Not separately recorded	Yes
Axial load capacity in one direction	Not separately recorded	Yes
Axial load capacity in both directions	Not separately recorded	Yes
Suitable for grease lubrication	Not separately recorded	Yes
Suitable for oil lubrication	Not separately recorded	Yes
Unsealed design	Not separately recorded	Yes

Open FAG 6309 product record →

KOYO 6309 — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	45 mm
D	Not separately recorded	100 mm
B	Not separately recorded	25 mm
R(Min.)	Not separately recorded	1.5 mm
Basic Load Ratings : Cr	Not separately recorded	61.1 kN
Basic Load Ratings : C0R	Not separately recorded	29.5 kN
Fatigue Load Limit : Cu	Not separately recorded	2.25 kN
Factor : F0	Not separately recorded	13.3
Limiting Speeds(Grease Lub.)	Not separately recorded	6800 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	8100 min-1
Da(Min.)	Not separately recorded	53 mm
Da(Max.)	Not separately recorded	92 mm
Ra(Max.)	Not separately recorded	1.5 mm
Mass(Refer.)	Not separately recorded	0.833 kg

Open KOYO 6309 product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6309Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.817 kg817 g
FAG6309Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.814 kg814 g
TIMKEN6309Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
NSK6309Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	58.5 kN	32 kN	—	—	0.829 kg829 g
KOYO6309Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	61.1 kN	29.5 kN	—	6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1Limiting Speeds(Oil Lub.): 8100 min-1	0.833 kg833 g
NACHI6309Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	66.5 kN	32 kN	—	—	0.833 kg833 g
NTN6309Deep groove ball bearing	Internal diameter (d) 45 mm 1.771654 in External diameter (D) 100 mm 3.937008 in Bearing/Inner ring width (B) 25 mm 0.984252 in	58.5 kN	32 kN	—	—	0.814 kg814 g
SKF6309-2RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.841 kg841 g
SKF6309-2RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.841 kg841 g
SKF6309-2RS1/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.847 kg847 g
SKF6309-2RS1/C4GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.84 kg840 g
SKF6309-2RS1/GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	4500 rpm	0.83 kg830 g
SKF6309-2RS1NRDeep groove ball bearing with snap ring and integral sealing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.862 kg862 g
SKF6309-2RS1NR/C3Deep groove ball bearing with snap ring and integral sealing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.868 kg868 g
SKF6309-2RS1TN9/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	52.7 kN	31.5 kN	—	4500 rpm	0.723 kg723 g
SKF6309-2RS2/C3HS0VT486Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.841 kg841 g
SKF6309-2RSHDeep groove ball bearing with seals	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.817 kg817 g
SKF6309 2RSJEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.847 kg847 g
SKF6309 2RSNRJEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.85 kg850 g
SKF6309-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.85 kg850 g
SKF6309-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.85 kg850 g
SKF6309-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.85 kg850 g
SKF6309-2Z/C3WTDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.85 kg850 g
SKF6309-2Z/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.855 kg855 g
SKF6309-2Z/C5Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.87 kg870 g
SKF6309-2Z/GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.83 kg830 g
SKF6309-2Z/HC5C3WTHybrid ceramic deep groove ball bearing with shields	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	52.7 kN	31.5 kN	18000 rpm	9500 rpm	0.747 kg747 g
SKF6309 2ZJEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.853 kg853 g
SKF6309-2ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.871 kg871 g
SKF6309 2ZNRJEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.83 kg830 g
SKF6309-2ZTN9/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	7500 rpm	0.838 kg838 g
SKF6309-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	—	31.5 kN	—	60 rpm	0.814 kg814 g
SKF6309/AXDDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	66.3 kN	31.5 kN	15000 rpm	9500 rpm	0.835 kg835 g
SKF6309/C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.817 kg817 g
SKF6309/C4Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.817 kg817 g
SKF6309/C5Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.83 kg830 g
SKF6309/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	52.7 kN	31.5 kN	18000 rpm	11000 rpm	0.714 kg714 g
SKF6309 JEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.81 kg810 g
SKF6309 MDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	14000 rpm	0.98 kg980 g
SKF6309 MA/C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	14000 rpm	1 kg1000 g
SKF6309 M/C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	14000 rpm	0.97 kg970 g
SKF6309 M/HC5C4S0Hybrid ceramic deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	52.7 kN	31.5 kN	18000 rpm	14000 rpm	0.82 kg820 g
SKF6309 NDeep groove ball bearing with snap ring groove	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.808 kg808 g
SKF6309 N/C3Deep groove ball bearing with snap ring groove	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.801 kg801 g
SKF6309 NRDeep groove ball bearing with snap ring	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.838 kg838 g
SKF6309 NR/C3Deep groove ball bearing with snap ring	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.838 kg838 g
SKF6309 NRJEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.831 kg831 g
SKF6309-RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.816 kg816 g
SKF6309-RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	4500 rpm	0.816 kg816 g
SKF6309-RS1/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.822 kg822 g
SKF6309 RSJEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	—	4500 rpm	0.822 kg822 g
SKF6309/VA201Deep groove ball bearing for high temperature applications	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	—	31.5 kN	—	60 rpm	0.83 kg830 g
SKF6309-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.822 kg822 g
SKF6309-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.822 kg822 g
SKF6309-Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.833 kg833 g
SKF6309-Z/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.822 kg822 g
SKF6309-Z/C5Deep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.822 kg822 g
SKF6309-Z/GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.84 kg840 g
SKF6309 ZJEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.825 kg825 g
SKF6309-ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.851 kg851 g
SKF6309 ZNRJEMDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	55.3 kN	31.5 kN	15000 rpm	9500 rpm	0.854 kg854 g
FAG6309-2RSRDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.835 kg835 g
FAG6309-2RSR-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.835 kg835 g
FAG6309-2RSR-L038Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.88 kg880 g
FAG6309-2RSR-L038-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.9 kg900 g
FAG6309-2RSR-L055-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.856 kg856 g
FAG6309-2RSR-L069-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.856 kg856 g
FAG6309-2RSR-L100Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.856 kg856 g
FAG6309-2RSR-L100-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.856 kg856 g
FAG6309-2RSR-L138-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.842 kg842 g
FAG6309-2RSR-L140Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.835 kg835 g
FAG6309-2RSR-L140-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.835 kg835 g
FAG6309-2RSR-L207-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.847 kg847 g
FAG6309-2RSR-L237-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.842 kg842 g
FAG6309-2ZDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.844 kg844 g
FAG6309-2Z-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.849 kg849 g
FAG6309-2Z-C4Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.844 kg844 g
FAG6309-2Z-CMDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.822 kg822 g
FAG6309-2Z-L038Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.848 kg848 g
FAG6309-2Z-L038-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.88 kg880 g
FAG6309-2Z-L038-C4Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.88 kg880 g
FAG6309-2Z-L069-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.88 kg880 g
FAG6309-2Z-L100-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.848 kg848 g
FAG6309-2Z-L138Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.845 kg845 g
FAG6309-2Z-L138-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.822 kg822 g
FAG6309-2Z-L140Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.835 kg835 g
FAG6309-2Z-L140-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.835 kg835 g
FAG6309-2Z-L207-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.845 kg845 g
FAG6309-2Z-L207-C4Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.856 kg856 g
FAG6309-2Z-L237-C4Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.844 kg844 g
FAG6309-2Z-L408-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.845 kg845 g
FAG6309-2Z-NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	8100 rpm	0.822 kg822 g
FAG6309-C-2BRS-L038-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.837 kg837 g
FAG6309-C-2BRS>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.85 kg850 g
FAG6309-C-2HRS-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	—	6400 rpm	0.838 kg838 g
FAG6309-C-2HRS-L207-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	—	6400 rpm	0.84 kg840 g
FAG6309-C-2HRS>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	—	6400 rpm	0.84 kg840 g
FAG6309-C-2Z-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.836 kg836 g
FAG6309-C-2Z-C4>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.836 kg836 g
FAG6309-C-2Z-L038>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.844 kg844 g
FAG6309-C-2Z-L069-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.843 kg843 g
FAG6309-C-2Z-L100-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.839 kg839 g
FAG6309-C-2Z-L138-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.844 kg844 g
FAG6309-C-2Z-L138>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.839 kg839 g
FAG6309-C-2Z-L207-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.839 kg839 g
FAG6309-C-2Z-L207-C4>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.839 kg839 g
FAG6309-C-2Z-L237-C4>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.84 kg840 g
FAG6309-C-2Z-L408-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.844 kg844 g
FAG6309-C-2Z>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	8900 rpm	0.839 kg839 g
FAG6309-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.815 kg815 g
FAG6309-C4Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.815 kg815 g
FAG6309-C-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	10500 rpm	0.809 kg809 g
FAG6309-C-C4>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	10500 rpm	0.809 kg809 g
FAG6309-C-HRS-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	—	6400 rpm	0.837 kg837 g
FAG6309-C-HRS>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	—	6400 rpm	0.818 kg818 g
FAG6309-CMDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.808 kg808 g
FAG6309-C-NR>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	10500 rpm	0.799 kg799 g
FAG6309-C>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	10500 rpm	0.809 kg809 g
FAG6309-C-Z-C3>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	10500 rpm	0.811 kg811 g
FAG6309-C-Z-C4>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	10500 rpm	0.818 kg818 g
FAG6309-C-Z>VDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	62 kN	31.5 kN	9100 rpm	10500 rpm	0.818 kg818 g
FAG6309-H-2RSR-SN-C3>NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	48.89 kN	29.56 kN	—	4350 rpm	0.797 kg797 g
FAG6309-H-2RSR-SN>NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	48.89 kN	29.56 kN	—	4350 rpm	0.797 kg797 g
FAG6309-H-2Z-SN-C3>NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	48.89 kN	29.56 kN	8100 rpm	8100 rpm	0.798 kg798 g
FAG6309-H-2Z-SN>NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	48.89 kN	29.56 kN	8100 rpm	8100 rpm	0.798 kg798 g
FAG6309-H-SN-C3>NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	48.89 kN	29.56 kN	8100 rpm	9500 rpm	0.802 kg802 g
FAG6309-H-SN>NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	48.89 kN	29.56 kN	8100 rpm	9500 rpm	0.802 kg802 g
FAG6309-J20AA-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.802 kg802 g
FAG6309-J20AA-C4Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.808 kg808 g
FAG6309-J20ABDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.83 kg830 g
FAG6309-J20AB-C4Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.813 kg813 g
FAG6309-J20GA-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.83 kg830 g
FAG6309-MDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	12400 rpm	1.01 kg1010 g
FAG6309-M-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	12400 rpm	1.02 kg1020 g
FAG6309-NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.87 kg870 g
FAG6309-N-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.814 kg814 g
FAG6309-NRDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.814 kg814 g
FAG6309-RSRDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.829 kg829 g
FAG6309-RSR-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	—	4300 rpm	0.829 kg829 g
FAG6309-ZDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.846 kg846 g
FAG6309-Z-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.846 kg846 g
FAG6309-Z-C4Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.846 kg846 g
FAG6309-Z-L038-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.818 kg818 g
FAG6309-Z-NDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.817 kg817 g
FAG6309-Z-N-C3Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.818 kg818 g
FAG6309-Z-NRDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	56 kN	31.5 kN	8200 rpm	9500 rpm	0.818 kg818 g
TIMKEN6309-2RSDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-2RS-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-2RS-C3/VSL609Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-2RS-NRDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.84 kg840 g
TIMKEN6309-2RS-NR-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-2RZDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.84 kg840 g
TIMKEN6309-2RZ-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.84 kg840 g
TIMKEN6309-2RZ-NRDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.84 kg840 g
TIMKEN6309-2RZ-NR-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.84 kg840 g
TIMKEN6309-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-C4Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309M-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	1.03 kg1030 g
TIMKEN6309-NRDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.84 kg840 g
TIMKEN6309-NR-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-RSDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-RS-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309/VSL609Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-ZDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309ZDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-Z-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-Z-NRDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-Z-NR-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-ZZDeep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
TIMKEN6309-ZZ-C3Deep groove ball bearing	Recorded bore (d) 45 mm 1.771654 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 25 mm 0.984252 in	48.8 kN	29.3 kN	—	—	0.81 kg810 g
NSK6309DDUDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	58.5 kN	32 kN	—	—	—
NSK6309VVDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	58.5 kN	32 kN	—	—	—
NSK6309ZZDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	58.5 kN	32 kN	—	—	—
KOYO6309 2RDDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	61.1 kN	29.5 kN	—	6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1	0.833 kg833 g
KOYO6309 2RSDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	61.1 kN	29.5 kN	—	4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1	0.833 kg833 g
KOYO6309 2RUDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	61.1 kN	29.5 kN	—	6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1	0.833 kg833 g
KOYO6309NRDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	61.1 kN	29.5 kN	—	6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1Limiting Speeds(Oil Lub.): 8100 min-1	0.833 kg833 g
KOYO6309 ZZDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Width (B) 25 mm 0.984252 in	61.1 kN	29.5 kN	—	6800 rpmLimiting Speeds(Grease Lub.): 6800 min-1	0.833 kg833 g
NACHI6309-2NKE9Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	66.5 kN	32 kN	—	—	—
NACHI6309-2NSE9Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	66.5 kN	32 kN	—	—	—
NACHI6309NKE9Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	66.5 kN	32 kN	—	—	—
NACHI6309NSE9Deep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	66.5 kN	32 kN	—	—	—
NACHI6309ZEDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	66.5 kN	32 kN	—	—	—
NACHI6309ZZEDeep groove ball bearing	Bore diameter (d) 45 mm 1.771654 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 25 mm 0.984252 in	66.5 kN	32 kN	—	—	—

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6309	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 6309	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6309	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6309	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6309	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6309	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NTN 6309	open	Not recorded	CN	pressed steel cage	Not recorded	Not recorded
SKF 6309-2RS1	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6309-2RS1/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6309-2RS1/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6309-2RS1/C4GJN	Seal on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6309-2RS1/GJN	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6309-2RS1NR	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6309-2RS1NR/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6309-2RS1TN9/HC5C3WT	Seal on both sides	Not recorded	C3	Non-metallic	Hybrid (ceramic balls)	Grease
SKF 6309-2RS2/C3HS0VT486	Seal on both sides	Not recorded	C3H	Sheet metal	Bearing steel	Grease
SKF 6309-2RSH	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6309 2RSJEM	Seal on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6309 2RSNRJEM	Seal on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6309-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6309-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6309-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6309-2Z/C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6309-2Z/C4	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6309-2Z/C5	Shield on both sides	Not recorded	C5	Sheet metal	Bearing steel	Grease
SKF 6309-2Z/GJN	Shield on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6309-2Z/HC5C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6309 2ZJEM	Shield on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6309-2ZNR	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6309 2ZNRJEM	Shield on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6309-2ZTN9/C3GJN	Shield on both sides	Not recorded	C3	Non-metallic	Bearing steel	Grease
SKF 6309-2Z/VA208	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6309/AXD	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6309/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6309/C4	Without	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6309/C5	Without	Not recorded	C5	Sheet metal	Bearing steel	None
SKF 6309/HC5C3	Without	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6309 JEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6309 M	Without	P6 and tighter width tolerance	CN	Machined brass	Bearing steel	None
SKF 6309 MA/C3	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6309 M/C3	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6309 M/HC5C4S0	Without	Not recorded	C4	Machined brass	Hybrid (ceramic balls)	None
SKF 6309 N	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6309 N/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6309 NR	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6309 NR/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6309 NRJEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6309-RS1	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6309-RS1/C3	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6309-RS1/C3GJN	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6309 RSJEM	Seal on one side	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6309/VA201	Without	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6309-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6309-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6309-Z/C3GJN	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6309-Z/C4	Shield on one side	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6309-Z/C5	Shield on one side	Not recorded	C5	Sheet metal	Bearing steel	None
SKF 6309-Z/GJN	Shield on one side	Not recorded	CN	Sheet metal	Bearing steel	None
SKF 6309 ZJEM	Shield on one side	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6309-ZNR	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6309 ZNRJEM	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
FAG 6309-2RSR	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-2RSR-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-2RSR-L038	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6309-2RSR-L038-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6309-2RSR-L055-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L055 — Grease (L055/customer specific)
FAG 6309-2RSR-L069-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6309-2RSR-L100	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6309-2RSR-L100-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6309-2RSR-L138-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6309-2RSR-L140	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6309-2RSR-L140-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6309-2RSR-L207-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6309-2RSR-L237-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L237 — Grease (L237/customer specific)
FAG 6309-2Z	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-2Z-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-2Z-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-2Z-CM	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-2Z-L038	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6309-2Z-L038-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6309-2Z-L038-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6309-2Z-L069-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6309-2Z-L100-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6309-2Z-L138	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6309-2Z-L138-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6309-2Z-L140	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6309-2Z-L140-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6309-2Z-L207-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6309-2Z-L207-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6309-2Z-L237-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L237 — Grease (L237/customer specific)
FAG 6309-2Z-L408-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L408 — Grease (L408/customer specific)
FAG 6309-2Z-N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-C-2BRS-L038-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6309-C-2BRS>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-C-2HRS-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-C-2HRS-L207-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6309-C-2HRS>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-C-2Z-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-C-2Z-C4>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-C-2Z-L038>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6309-C-2Z-L069-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6309-C-2Z-L100-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6309-C-2Z-L138-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6309-C-2Z-L138>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6309-C-2Z-L207-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6309-C-2Z-L207-C4>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6309-C-2Z-L237-C4>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L237 — Grease (L237/customer specific)
FAG 6309-C-2Z-L408-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L408 — Grease (L408/customer specific)
FAG 6309-C-2Z>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6309-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C-C4>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C-HRS-C3>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C-HRS>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-CM	Without — Not sealed	PN — Normal (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C-NR>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C-Z-C3>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C-Z-C4>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-C-Z>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-H-2RSR-SN-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6309-H-2RSR-SN>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6309-H-2Z-SN-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6309-H-2Z-SN>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6309-H-SN-C3>N	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-H-SN>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-J20AA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-J20AA-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-J20AB	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-J20AB-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-J20GA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-M	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6309-M-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6309-N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-N-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-NR	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-RSR	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-RSR-C3	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-Z	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-Z-C3	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-Z-C4	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-Z-L038-C3	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6309-Z-N	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-Z-N-C3	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6309-Z-NR	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6309-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RS-C3/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RS-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RS-NR-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RZ-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-2RZ-NR-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-C4	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309M-C3	Open	Not recorded	Not recorded	Brass cage	Not recorded	Not recorded
TIMKEN 6309-NR	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-NR-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309/VSL609	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-Z-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-Z-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6309-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6309DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6309VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6309ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6309 2RD	Extremely light contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6309 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6309 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6309NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6309 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6309-2NKE9	Two non-contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6309-2NSE9	Two contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6309NKE9	One non-contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6309NSE9	One contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6309ZE	One shield	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6309ZZE	Two shields	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →KOYO

6309 2RS

Deep groove ball bearing

View full technical record →

Filter all 185 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6309 dimensions and recorded technical data

Read the original dimensions for 6309

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Catalogue parameters for 6309

Dimensions

Performance

Properties

Logistics

Engineering — Dimensions

Engineering — Abutment dimensions

Engineering — Calculation data

Engineering — Tolerances of run-out

Main Dimensions & Performance Data

Mounting dimensions

Dimensions

Temperature range

Calculation factors

Product characteristics

Capabilities & suitability

Technical Data

How to compare these values

Related prefix matches — other model numbers may appear

6309

6309

6309

6309

6309

6309

6309

6309-2NKE9

6309-2NSE9

6309 2RD

6309-2RS

6309 2RS

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.