Find · understand · compare

6302 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6302. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Exact model evidence

6302 dimensions and recorded technical data

The recorded 6302 base designation measures 15×42×13 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI, NTN. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 80 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6302

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6302-Z — 13 dimension fields

Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.007 to 0 mm
Outside diameter	D	42 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.009 to 0 mm
Width	B	13 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 23.7 mm
Recess diameter	D 2	≈ 36.23 mm
Chamfer dimension	r 1,2	min. 1 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 20.6 mm
Diameter of shaft abutment	d a	max. 23.6 mm
Diameter of housing abutment	D a	max. 36.4 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Open the complete SKF 6302-Z record →

SKF 6302 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.007 to 0 mm
Outside diameter	D	42 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.009 to 0 mm
Width	B	13 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 23.7 mm
Recess diameter	D 2	≈ 36.23 mm
Chamfer dimension	r 1,2	min. 1 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 20.6 mm
Diameter of housing abutment	D a	max. 36.4 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Open the complete SKF 6302 record →

KOYO 6302 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	42 mm
Width	B	13 mm

Open the complete KOYO 6302 record →

KOYO 6302 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	42 mm
Width	B	13 mm

Open the complete KOYO 6302 2RS record →

KOYO 6302 ZZ — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	15 mm
Outside diameter	D	42 mm
Width	B	13 mm

Open the complete KOYO 6302 ZZ record →

TIMKEN 6302-RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	42 mm / 1.654 in
Width (B)	B	13 mm / 0.512 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6302-RS record →

TIMKEN 6302-Z — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	42 mm / 1.654 in
Width (B)	B	13 mm / 0.512 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6302-Z record →

TIMKEN 6302 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	42 mm / 1.654 in
Width (B)	B	13 mm / 0.512 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6302 record →

TIMKEN 6302-ZZ — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	42 mm / 1.654 in
Width (B)	B	13 mm / 0.512 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6302-ZZ record →

TIMKEN 6302-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	15 mm
O.D. (D)	D	42 mm / 1.654 in
Width (B)	B	13 mm / 0.512 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6302-2RS record →

Check shaft and hole fit →Search measured dimensions →

Exact designation reference

Catalogue parameters for 6302

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

SKF 6302 KOYO 6302

SKF 6302 — 49 recorded parameters

Deep groove ball bearing

Reference: SKF product catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	Not separately recorded	15.0 mm
Outside diameter	Not separately recorded	42.0 mm
Width	Not separately recorded	13.0 mm

Performance

Parameter	Source symbol	Recorded value
Basic dynamic load rating	Not separately recorded	11.9 kN
Basic static load rating	Not separately recorded	5.4 kN
Reference speed	Not separately recorded	38000.0 r/min
Limiting speed	Not separately recorded	24000.0 r/min
SKF performance class	Not separately recorded	SKF Explorer

Properties

Parameter	Source symbol	Recorded value
Filling slots	Not separately recorded	Without
Number of rows	Not separately recorded	1
Locating feature, bearing outer ring	Not separately recorded	Without
Bore type	Not separately recorded	Cylindrical
Cage	Not separately recorded	Sheet metal
Matched arrangement	Not separately recorded	No
Radial internal clearance	Not separately recorded	CN
Material, bearing	Not separately recorded	Bearing steel
Coating	Not separately recorded	Without
Sealing	Not separately recorded	Without
Relubrication feature	Not separately recorded	Without
Indicative carbon footprint for new product	Not separately recorded	0.29 kg CO 2 e

Logistics

Parameter	Source symbol	Recorded value
Product net weight	Not separately recorded	0.0792 kg

Engineering — Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	15 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.007 to 0 mm
Outside diameter	D	42 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.009 to 0 mm
Width	B	13 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 23.7 mm
Recess diameter	D 2	≈ 36.23 mm
Chamfer dimension	r 1,2	min. 1 mm
ISO tolerance class for dimensions	Not separately recorded	P6 and tighter width tolerance

Engineering — Abutment dimensions

Parameter	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 20.6 mm
Diameter of housing abutment	D a	max. 36.4 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Engineering — Calculation data

Parameter	Source symbol	Recorded value
SKF performance class	Not separately recorded	SKF Explorer
Basic dynamic load rating	C	11.9 kN
Basic static load rating	C 0	5.4 kN
Fatigue load limit	P u	0.228 kN
Reference speed	Not separately recorded	38000 r/min
Limiting speed	Not separately recorded	24000 r/min
Minimum load factor	k r	0.03
Calculation factor	f 0	12

Engineering — Tolerances of run-out

Parameter	Source symbol	Recorded value
Range of section height at inner ring of assembled bearing	t Kia	4 µm
Maximum run-out of inner ring side face to the bore	t Sd	7 µm
Maximum axial run-out of inner ring of assembled bearing	t Sia	7 µm
Range of section height at outer ring of assembled bearing	t Kea	7 µm
Perpendicularity of outer ring outside surface	t SD	4 µm
Maximum axial run-out of outer ring of assembled bearing	t Sea	8 µm
ISO tolerance class for geometrical tolerances	Not separately recorded	P5

Open SKF 6302 product record →

KOYO 6302 — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	15 mm
D	Not separately recorded	42 mm
B	Not separately recorded	13 mm
R(Min.)	Not separately recorded	1 mm
Basic Load Ratings : Cr	Not separately recorded	14.3 kN
Basic Load Ratings : C0R	Not separately recorded	5.45 kN
Fatigue Load Limit : Cu	Not separately recorded	0.460 kN
Factor : F0	Not separately recorded	12.3
Limiting Speeds(Grease Lub.)	Not separately recorded	17000 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	20000 min-1
Da(Min.)	Not separately recorded	20 mm
Da(Max.)	Not separately recorded	37 mm
Ra(Max.)	Not separately recorded	1 mm
Mass(Refer.)	Not separately recorded	0.082 kg

Open KOYO 6302 product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6302Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	24000 rpm	0.0792 kg79.2 g
TIMKEN6302Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
NSK6302Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	12.6 kN	5.45 kN	—	—	0.083 kg83 g
KOYO6302Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	14.3 kN	5.45 kN	—	17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 20000 min-1	0.082 kg82 g
NACHI6302Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	14.4 kN	5.4 kN	—	—	0.082 kg82 g
NTN6302Deep groove ball bearing	Internal diameter (d) 15 mm 0.590551 in External diameter (D) 42 mm 1.653543 in Bearing/Inner ring width (B) 13 mm 0.511811 in	12.7 kN	5.45 kN	—	—	0.082 kg82 g
SKF6302-2RSHDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.9 kN	5.4 kN	—	12000 rpm	0.0822 kg82.2 g
SKF6302-2RSH/C3Deep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	12000 rpm	0.0822 kg82.2 g
SKF6302-2RSH/C3GJNDeep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	—	12000 rpm	0.0848 kg84.8 g
SKF6302-2RSH/C3WTDeep groove ball bearing with seals	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	—	12000 rpm	0.0822 kg82.2 g
SKF6302-2RSH/VA947SKF Food line deep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.9 kN	5.4 kN	—	12000 rpm	0.0849 kg84.9 g
SKF6302 2RSJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	—	12000 rpm	0.084 kg84 g
SKF6302-2RSLDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	19000 rpm	0.084 kg84 g
SKF6302-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	19000 rpm	0.084 kg84 g
SKF6302-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	19000 rpm	0.084 kg84 g
SKF6302-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	19000 rpm	0.084 kg84 g
SKF6302-2Z/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	19000 rpm	0.084 kg84 g
SKF6302 2ZJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	19000 rpm	0.084 kg84 g
SKF6302-2Z/LHT23Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	19000 rpm	0.084 kg84 g
SKF6302/C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	24000 rpm	0.0792 kg79.2 g
SKF6302 JEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	24000 rpm	0.0792 kg79.2 g
SKF6302-RSHDeep groove ball bearing with seals	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.9 kN	5.4 kN	—	12000 rpm	0.0828 kg82.8 g
SKF6302 RSJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	—	12000 rpm	0.0804 kg80.4 g
SKF6302-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	24000 rpm	0.0795 kg79.5 g
SKF6302-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	24000 rpm	0.0804 kg80.4 g
SKF6302 ZJEMDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	24000 rpm	0.0804 kg80.4 g
SKF6302-ZTN9/LHT23Deep groove ball bearing with seals or shields	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.9 kN	5.4 kN	38000 rpm	24000 rpm	0.0791 kg79.1 g
FAG6302-C-2BRS>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	23500 rpm	0.083 kg83 g
FAG6302-C-2HRS-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	—	17700 rpm	0.1 kg100 g
FAG6302-C-2HRS-L038-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	—	17700 rpm	0.1 kg100 g
FAG6302-C-2HRS-L038>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	—	17700 rpm	0.1 kg100 g
FAG6302-C-2HRS-L207-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	—	17700 rpm	0.084 kg84 g
FAG6302-C-2HRS>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	—	17700 rpm	0.083 kg83 g
FAG6302-C-2Z-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	23500 rpm	0.101 kg101 g
FAG6302-C-2Z-C4>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	23500 rpm	0.101 kg101 g
FAG6302-C-2Z-L038-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	23500 rpm	0.084 kg84 g
FAG6302-C-2Z-L038>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	23500 rpm	0.084 kg84 g
FAG6302-C-2Z-L207-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	23500 rpm	0.085 kg85 g
FAG6302-C-2Z>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	23500 rpm	0.101 kg101 g
FAG6302-C-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	27500 rpm	0.1 kg100 g
FAG6302-C-HRS-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	—	17700 rpm	0.082 kg82 g
FAG6302-C>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	27500 rpm	0.08 kg80 g
FAG6302-C-Z-C3>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	27500 rpm	0.08 kg80 g
FAG6302-C-Z>VDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	13.3 kN	5.3 kN	19200 rpm	27500 rpm	0.082 kg82 g
FAG6302-H-2RSR-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.45 kN	5.43 kN	—	11000 rpm	0.09 kg90 g
FAG6302-H-2RSR>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.45 kN	5.43 kN	—	11000 rpm	0.09 kg90 g
FAG6302-H-2Z-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.45 kN	5.43 kN	16500 rpm	20800 rpm	0.09 kg90 g
FAG6302-H-2Z>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.45 kN	5.43 kN	16500 rpm	20800 rpm	0.09 kg90 g
FAG6302-H-C3>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.45 kN	5.43 kN	16500 rpm	24400 rpm	0.088 kg88 g
FAG6302-H>NDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	11.45 kN	5.43 kN	16500 rpm	24400 rpm	0.088 kg88 g
TIMKEN6302-2RSDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-2RS-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-2RZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-2RZ-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-2RZ-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-RSDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-RS-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302/VSL609Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-ZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-Z-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-Z-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-ZZDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-ZZ-C3Deep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
TIMKEN6302-ZZ-NRDeep groove ball bearing	Recorded bore (d) 15 mm 0.590551 in Recorded outside dimension (D) 42 mm 1.653543 in Catalogue width (symbol unverified) 13 mm 0.511811 in	11.3 kN	5.35 kN	—	—	0.08 kg80 g
NSK6302DDUDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	12.6 kN	5.45 kN	—	—	—
NSK6302VVDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	12.6 kN	5.45 kN	—	—	—
NSK6302ZZDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	12.6 kN	5.45 kN	—	—	—
KOYO6302 2RDDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	14.3 kN	5.45 kN	—	15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1	0.082 kg82 g
KOYO6302 2RSDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	14.3 kN	5.45 kN	—	12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1	0.082 kg82 g
KOYO6302 2RUDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	14.3 kN	5.45 kN	—	17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1	0.082 kg82 g
KOYO6302NRDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	14.3 kN	5.45 kN	—	17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 20000 min-1	0.082 kg82 g
KOYO6302 ZZDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Width (B) 13 mm 0.511811 in	14.3 kN	5.45 kN	—	17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1	0.082 kg82 g
NACHI6302-2NKE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	14.4 kN	5.4 kN	—	—	—
NACHI6302-2NSE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	14.4 kN	5.4 kN	—	—	—
NACHI6302NKE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	14.4 kN	5.4 kN	—	—	—
NACHI6302NSE9Deep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	14.4 kN	5.4 kN	—	—	—
NACHI6302ZEDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	14.4 kN	5.4 kN	—	—	—
NACHI6302ZZEDeep groove ball bearing	Bore diameter (d) 15 mm 0.590551 in Outside diameter (D) 42 mm 1.653543 in Bearing width (B) 13 mm 0.511811 in	14.4 kN	5.4 kN	—	—	—

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6302	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
TIMKEN 6302	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6302	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6302	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6302	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NTN 6302	open	Not recorded	CN	pressed steel cage	Not recorded	Not recorded
SKF 6302-2RSH	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6302-2RSH/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6302-2RSH/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6302-2RSH/C3WT	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6302-2RSH/VA947	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Food grade grease
SKF 6302 2RSJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6302-2RSL	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6302-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6302-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6302-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6302-2Z/C4	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6302 2ZJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6302-2Z/LHT23	Shield on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6302/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6302 JEM	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6302-RSH	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6302 RSJEM	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6302-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6302-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6302 ZJEM	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6302-ZTN9/LHT23	Shield on one side	Not recorded	CN	Non-metallic	Bearing steel	Grease
FAG 6302-C-2BRS>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6302-C-2HRS-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6302-C-2HRS-L038-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6302-C-2HRS-L038>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6302-C-2HRS-L207-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6302-C-2HRS>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6302-C-2Z-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6302-C-2Z-C4>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6302-C-2Z-L038-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6302-C-2Z-L038>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6302-C-2Z-L207-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6302-C-2Z>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6302-C-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6302-C-HRS-C3>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6302-C>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6302-C-Z-C3>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6302-C-Z>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6302-H-2RSR-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6302-H-2RSR>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6302-H-2Z-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6302-H-2Z>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6302-H-C3>N	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6302-H>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6302-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-2RZ-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302/VSL609	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-Z-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6302-ZZ-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6302DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6302VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6302ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6302 2RD	Extremely light contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6302 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6302 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6302NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6302 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6302-2NKE9	Two non-contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6302-2NSE9	Two contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6302NKE9	One non-contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6302NSE9	One contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6302ZE	One shield	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6302ZZE	Two shields	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →KOYO

6302 2RS

Deep groove ball bearing

View full technical record →

Filter all 81 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6302 dimensions and recorded technical data

Read the original dimensions for 6302

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Catalogue parameters for 6302

Dimensions

Performance

Properties

Logistics

Engineering — Dimensions

Engineering — Abutment dimensions

Engineering — Calculation data

Engineering — Tolerances of run-out

Technical Data

How to compare these values

Related prefix matches — other model numbers may appear

6302

6302

6302

6302

6302

6302

6302-2NKE9

6302-2NSE9

6302 2RD

63022RMXCM-AM

6302-2RS

6302 2RS

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.