624Z bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 624Z. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
624Z dimensions and recorded technical data
The recorded 624Z base designation measures 4×13×5 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 5 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF624-ZDeep groove ball bearing with seals or shields |
| 0.936 kN | 0.29 kN | 110000 rpm | 67000 rpm | 0.0029 kg2.9 g |
| FAG624-Z>NDeep groove ball bearing |
| 1.38 kN | 0.485 kN | 44500 rpm | 72000 rpm | 0.003 kg3 g |
| NSK624ZZ1Deep groove ball bearing |
| 1.43 kN | 0.485 kN | — | — | 0.00304 kg3.04 g |
| KOYO624 ZZDeep groove ball bearing |
| 1.65 kN | 0.48 kN | — | 44000 rpmLimiting Speeds(Grease Lub.): 44000 min-1Limiting Speeds(Oil Lub.): - min-1 | 0.002 kg2 g |
| EZO624ZZDeep groove ball bearing |
| 1.3 kN | 0.485 kN | — | — | 0.00288 kg2.88 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 624-Z | Shield on one side | Normal | CN | Sheet metal | Bearing steel | None |
| FAG 624-Z>N | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| NSK 624ZZ1 | Metal shields on both sides (ZZ1) | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 624 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| EZO 624ZZ | Two pressed-steel shields | Not recorded | Not recorded | Not recorded | High-carbon chromium bearing steel | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
624-Z
Deep groove ball bearing with seals or shields
View full technical record →FAG624-Z>N
Deep groove ball bearing
View full technical record →KOYO624 ZZ
Deep groove ball bearing
View full technical record →EZO624ZZ
Deep groove ball bearing
View full technical record →NSK624ZZ1
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.