6236 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6236. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6236 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6236 | 180× | 7.0866× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6236 | 227000 / 241000 N | 2200 / 1900 r/min | Base-row catalogue values only; no cross-brand transfer. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6236 dimensions and recorded technical data
The recorded 6236 base designation measures 180×320×52 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 20 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6236
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
KOYO 6236 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 180 mm |
| Outside diameter | D | 320 mm |
| Width | B | 52 mm |
Catalogue parameters for 6236
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
KOYO 6236 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 180 mm |
| D | Not separately recorded | 320 mm |
| B | Not separately recorded | 52 mm |
| R(Min.) | Not separately recorded | 4 mm |
| Basic Load Ratings : Cr | Not separately recorded | 284 kN |
| Basic Load Ratings : C0R | Not separately recorded | 241 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 12.0 kN |
| Factor : F0 | Not separately recorded | 15.1 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 1800 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 2200 min-1 |
| Da(Min.) | Not separately recorded | 196 mm |
| Da(Max.) | Not separately recorded | 304 mm |
| Ra(Max.) | Not separately recorded | 3 mm |
| Mass(Refer.) | Not separately recorded | 18.3 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| TIMKEN6236Deep groove ball bearing |
| 228 kN | 242 kN | — | — | 15.1 kg15100 g |
| NSK6236Deep groove ball bearing |
| 250 kN | 241 kN | — | — | 15.9 kg15900 g |
| KOYO6236Deep groove ball bearing |
| 284 kN | 241 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1Limiting Speeds(Oil Lub.): 2200 min-1 | 18.3 kg18300 g |
| SKF6236 MDeep groove ball bearing |
| 229 kN | 240 kN | 4000 rpm | 3800 rpm | 18.2 kg18200 g |
| SKF6236 M/C3Deep groove ball bearing |
| 229 kN | 240 kN | 4000 rpm | 3800 rpm | 18.2 kg18200 g |
| FAG6236-C4Deep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 2800 rpm | 16.5 kg16500 g |
| FAG6236-MDeep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 18.744 kg18744 g |
| FAG6236-MADeep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 19 kg19000 g |
| FAG6236-MA-C3Deep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 19 kg19000 g |
| FAG6236-MA-C4Deep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 18.888 kg18888 g |
| FAG6236-M-C3Deep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 18.744 kg18744 g |
| FAG6236-M-C4Deep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 18.744 kg18744 g |
| FAG6236-M-J20AADeep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 18.7 kg18700 g |
| FAG6236-M-J20AA-C3Deep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 18.7 kg18700 g |
| FAG6236-M-J20CDeep groove ball bearing |
| 240 kN | 244 kN | 2750 rpm | 3650 rpm | 18.6 kg18600 g |
| TIMKEN6236-C3Deep groove ball bearing |
| 228 kN | 242 kN | — | — | 15.1 kg15100 g |
| TIMKEN6236MDeep groove ball bearing |
| 228 kN | 242 kN | — | — | 21.39 kg21390 g |
| TIMKEN6236M-C3Deep groove ball bearing |
| 228 kN | 242 kN | — | — | 21.39 kg21390 g |
| NSK6236ZZSDeep groove ball bearing |
| 250 kN | 241 kN | — | — | — |
| KOYO6236-1 ZZXDeep groove ball bearing |
| 264 kN | 226 kN | — | 1800 rpmLimiting Speeds(Grease Lub.): 1800 min-1 | 18.3 kg18300 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| TIMKEN 6236 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6236 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6236 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6236 M | Without | Normal | CN | Machined brass | Bearing steel | None |
| SKF 6236 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| FAG 6236-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6236-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6236-MA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | MA — Solid brass cage, outer ring guided | Not recorded | Without — Bearing not greased |
| FAG 6236-MA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | MA — Solid brass cage, outer ring guided | Not recorded | Without — Bearing not greased |
| FAG 6236-MA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | MA — Solid brass cage, outer ring guided | Not recorded | Without — Bearing not greased |
| FAG 6236-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6236-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6236-M-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6236-M-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6236-M-J20C | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| TIMKEN 6236-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6236M | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 6236M-C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 6236ZZS | Shielded ZZS catalogue type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6236-1 ZZX | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6236
Deep groove ball bearing
View full technical record →KOYO6236
Deep groove ball bearing
View full technical record →NSK6236
Deep groove ball bearing
View full technical record →TIMKEN623 / 612
Tapered roller bearing
View full technical record →KOYO623/612
Tapered roller bearing
View full technical record →TIMKEN623 / 612A
Tapered roller bearing
View full technical record →TIMKEN623 / 612B
Tapered roller bearing
View full technical record →TIMKEN623 / 612-S
Tapered roller bearing
View full technical record →TIMKEN623 / 613-S
Tapered roller bearing
View full technical record →TIMKEN623 / 614X
Tapered roller bearing
View full technical record →KOYO6236-1 ZZX
Deep groove ball bearing
View full technical record →TIMKEN6236-C3
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.