6232 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6232. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6232 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6232 | 160× | 6.2992× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6232 | — | 2500 / 2100 r/min | Load ratings withheld because the printed N/lbf pair needs verification. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6232 dimensions and recorded technical data
This base designation has conflicting recorded dimensions. Choose the complete brand and designation below. A single dimensional answer would hide a real difference between records.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 22 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6232
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6232 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 160 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.025 to 0 mm |
| Outside diameter | D | 290 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.035 to 0 mm |
| Width | B | 48 mm |
| Deviation limits of ring width | t ΔBs | -0.25 to 0 mm |
| Shoulder diameter | d 1 | ≈ 205.65 mm |
| Shoulder diameter | D 1 | ≈ 242.35 mm |
| Chamfer dimension | r 1,2 | min. 3 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 174 mm |
| Diameter of housing abutment | D a | max. 276 mm |
| Radius of shaft or housing fillet | r a | max. 2.5 mm |
KOYO 6232 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 160 mm |
| Outside diameter | D | 290 mm |
| Width | B | 48 mm |
TIMKEN 6232 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 160 mm |
| O.D. (D) | D | 290 mm / 11.417 in |
| Width (B) | B | 48 mm / 1.890 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 3 mm / 0.118 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6232Deep groove ball bearing |
| 186 kN | 186 kN | 4500 rpm | 3000 rpm | 13.3 kg13300 g |
| TIMKEN6232Deep groove ball bearing |
| 185 kN | 186 kN | — | — | 11.7 kg11700 g |
| NSK6232Deep groove ball bearing |
| 204 kN | 186 kN | — | — | 12.8 kg12800 g |
| KOYO62/32Deep groove ball bearing |
| 29.4 kN | 13.1 kN | — | 10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1Limiting Speeds(Oil Lub.): 12000 min-1 | 0.228 kg228 g |
| KOYO6232Deep groove ball bearing |
| 231 kN | 186 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1Limiting Speeds(Oil Lub.): 2500 min-1 | 14.3 kg14300 g |
| NACHI62/32Deep groove ball bearing |
| 28.3 kN | 13.1 kN | — | — | 0.23 kg230 g |
| SKF6232/C3Deep groove ball bearing |
| 186 kN | 186 kN | 4500 rpm | 3000 rpm | 13.3 kg13300 g |
| SKF6232 MDeep groove ball bearing |
| 186 kN | 186 kN | 4500 rpm | 4300 rpm | 14.3 kg14300 g |
| SKF6232 M/C3Deep groove ball bearing |
| 186 kN | 186 kN | 4500 rpm | 4300 rpm | 14.3 kg14300 g |
| FAG6232-MDeep groove ball bearing |
| 212 kN | 203 kN | 3100 rpm | 4050 rpm | 14.38 kg14380 g |
| FAG6232-M-C3Deep groove ball bearing |
| 212 kN | 203 kN | 3100 rpm | 4050 rpm | 14.38 kg14380 g |
| FAG6232-M-C4Deep groove ball bearing |
| 212 kN | 203 kN | 3100 rpm | 4050 rpm | 14.38 kg14380 g |
| FAG6232-M-J20AADeep groove ball bearing |
| 212 kN | 203 kN | 3100 rpm | 4050 rpm | 14.44 kg14440 g |
| FAG6232-M-J20AA-C3Deep groove ball bearing |
| 212 kN | 203 kN | 3100 rpm | 4050 rpm | 14.7 kg14700 g |
| FAG6232-M-J20CDeep groove ball bearing |
| 212 kN | 203 kN | 3100 rpm | 4050 rpm | 14.5 kg14500 g |
| FAG6232-M-J20C-C3Deep groove ball bearing |
| 212 kN | 203 kN | 3100 rpm | 4050 rpm | 14.5 kg14500 g |
| FAG6232-M-J20C-C4Deep groove ball bearing |
| 212 kN | 203 kN | 3100 rpm | 4050 rpm | 14.5 kg14500 g |
| TIMKEN6232-C3Deep groove ball bearing |
| 185 kN | 186 kN | — | — | 11.7 kg11700 g |
| TIMKEN6232MDeep groove ball bearing |
| 185 kN | 186 kN | — | — | 15.3 kg15300 g |
| TIMKEN6232M-C3Deep groove ball bearing |
| 185 kN | 186 kN | — | — | 15.3 kg15300 g |
| NSK6232ZZSDeep groove ball bearing |
| 204 kN | 186 kN | — | — | — |
| KOYO6232 ZZXDeep groove ball bearing |
| 231 kN | 186 kN | — | 2100 rpmLimiting Speeds(Grease Lub.): 2100 min-1 | 14.3 kg14300 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6232 | Without | Normal | CN | Not recorded | Bearing steel | None |
| TIMKEN 6232 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6232 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 62/32 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6232 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 62/32 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6232/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6232 M | Without | Normal | CN | Machined brass | Bearing steel | None |
| SKF 6232 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| FAG 6232-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6232-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6232-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6232-M-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6232-M-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6232-M-J20C | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6232-M-J20C-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6232-M-J20C-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| TIMKEN 6232-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6232M | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 6232M-C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 6232ZZS | Shielded ZZS catalogue type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6232 ZZX | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6232
Deep groove ball bearing
View full technical record →TIMKEN6232
Deep groove ball bearing
View full technical record →KOYO62/32
Deep groove ball bearing
View full technical record →KOYO6232
Deep groove ball bearing
View full technical record →NSK6232
Deep groove ball bearing
View full technical record →NACHI62/32
Deep groove ball bearing
View full technical record →NACHI62/32-2NKE9
Deep groove ball bearing
View full technical record →NACHI62/32-2NSE9
Deep groove ball bearing
View full technical record →KOYO62/32 2RD
Deep groove ball bearing
View full technical record →KOYO62/32 2RS
Deep groove ball bearing
View full technical record →KOYO62/32 2RU
Deep groove ball bearing
View full technical record →SKF6232/C3
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.