6222 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6222. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6222 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6222 | 110× | 4.3307× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6222 | 144500 / 117000 N | 3800 / 3200 r/min | Base-row catalogue values only; no cross-brand transfer. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6222 dimensions and recorded technical data
This base designation has conflicting recorded dimensions. Choose the complete brand and designation below. A single dimensional answer would hide a real difference between records.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 62 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6222
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6222/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 110.0 mm |
| Outside diameter | Not supplied separately | 200.0 mm |
| Width | Not supplied separately | 38.0 mm |
SKF 6222 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 110 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.015 to 0 mm |
| Outside diameter | D | 200 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.02 to 0 mm |
| Width | B | 38 mm |
| Deviation limits of ring width | t ΔBs | -0.1 to 0 mm |
| Shoulder diameter | d 1 | ≈ 138 mm |
| Recess diameter | D 2 | ≈ 176.7 mm |
| Chamfer dimension | r 1,2 | min. 2.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 122 mm |
| Diameter of housing abutment | D a | max. 188 mm |
| Radius of shaft or housing fillet | r a | max. 2 mm |
FAG 6222 — 9 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 110 mm |
| Outside diameter | D | 200 mm |
| Width | B | 38 mm |
| Minimum chamfer dimension | rmin | 2.1 mm |
| Shoulder diameter outer ring | D1 | 171.68 mm |
| Shoulder diameter inner ring | d1 | 138.42 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 122 mm |
| Maximum diameter of housing shoulder | Da max | 188 mm |
| Maximum fillet radius | ra max | 2.1 mm |
FAG 6222-C3 — 9 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 110 mm |
| Outside diameter | D | 200 mm |
| Width | B | 38 mm |
| Minimum chamfer dimension | rmin | 2.1 mm |
| Shoulder diameter outer ring | D1 | 171.68 mm |
| Shoulder diameter inner ring | d1 | 138.42 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 122 mm |
| Maximum diameter of housing shoulder | Da max | 188 mm |
| Maximum fillet radius | ra max | 2.1 mm |
KOYO 6222 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 110 mm |
| Outside diameter | D | 200 mm |
| Width | B | 38 mm |
TIMKEN 6222 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 110 mm |
| O.D. (D) | D | 200 mm / 7.874 in |
| Width (B) | B | 38 mm / 1.496 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.1 mm / 0.083 in |
TIMKEN 6222-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 110 mm |
| O.D. (D) | D | 200 mm / 7.874 in |
| Width (B) | B | 38 mm / 1.496 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.1 mm / 0.083 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF62/22Deep groove ball bearing |
| 14 kN | 7.65 kN | 30000 rpm | 19000 rpm | 0.117 kg117 g |
| SKF6222Deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 4300 rpm | 4.34 kg4340 g |
| FAG6222Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.445 kg4445 g |
| TIMKEN6222Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.36 kg4360 g |
| NSK6222Deep groove ball bearing |
| 159 kN | 117 kN | — | — | 4.45 kg4450 g |
| KOYO62/22Deep groove ball bearing |
| 16 kN | 6.65 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1Limiting Speeds(Oil Lub.): 17000 min-1 | 0.118 kg118 g |
| KOYO6222Deep groove ball bearing |
| 180 kN | 117 kN | — | 3100 rpmLimiting Speeds(Grease Lub.): 3100 min-1Limiting Speeds(Oil Lub.): 3700 min-1 | 4.36 kg4360 g |
| NACHI62/22Deep groove ball bearing |
| 17.5 kN | 6.95 kN | — | — | 0.12 kg120 g |
| SKF6222-2RS1Deep groove ball bearing with seals or shields |
| 151 kN | 118 kN | — | 2000 rpm | 4.59 kg4590 g |
| SKF6222-2ZDeep groove ball bearing with seals or shields |
| 151 kN | 118 kN | 6700 rpm | 3400 rpm | 4.47 kg4470 g |
| SKF6222-2Z/C3Deep groove ball bearing with seals or shields |
| 151 kN | 118 kN | 6700 rpm | 3400 rpm | 4.47 kg4470 g |
| SKF6222 2ZJEMDeep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 3400 rpm | 4.52 kg4520 g |
| SKF6222/C3Deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 4300 rpm | 4.34 kg4340 g |
| SKF6222/C3S1Deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 4300 rpm | 4.39 kg4390 g |
| SKF6222/C3VL0241INSOCOAT® deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 4300 rpm | 4.25 kg4250 g |
| SKF6222/C4Deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 4300 rpm | 4.34 kg4340 g |
| SKF6222/HC5C3Hybrid ceramic deep groove ball bearing |
| 143 kN | 118 kN | 8000 rpm | 5000 rpm | 3.77 kg3770 g |
| SKF6222 JEMDeep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 4300 rpm | 4.39 kg4390 g |
| SKF6222 MA/C3B20Deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 6300 rpm | 5.34 kg5340 g |
| SKF6222 M/C3Deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 6300 rpm | 5.29 kg5290 g |
| SKF6222 M/C3VL0241INSOCOAT® deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 6300 rpm | 5.01 kg5010 g |
| SKF6222 M/C4Deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 6300 rpm | 5.29 kg5290 g |
| SKF6222 M/C4VL0241INSOCOAT® deep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 6300 rpm | 5.01 kg5010 g |
| SKF6222-ZDeep groove ball bearing with seals or shields |
| 151 kN | 118 kN | 6700 rpm | 4300 rpm | 4.41 kg4410 g |
| SKF6222 ZJEMDeep groove ball bearing |
| 151 kN | 118 kN | 6700 rpm | 4300 rpm | 4.41 kg4410 g |
| FAG6222-2ZDeep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 3800 rpm | 4.345 kg4345 g |
| FAG6222-2Z-C3Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 3800 rpm | 4.345 kg4345 g |
| FAG6222-2Z-C4Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 3800 rpm | 4.345 kg4345 g |
| FAG6222-C2Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.64 kg4640 g |
| FAG6222-C3Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.64 kg4640 g |
| FAG6222-C4Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.64 kg4640 g |
| FAG6222-J20AADeep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.467 kg4467 g |
| FAG6222-J20AA-C3Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.69 kg4690 g |
| FAG6222-J20GA-C3Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.52 kg4520 g |
| FAG6222-MDeep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 5800 rpm | 5.4 kg5400 g |
| FAG6222-M-C3Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 5800 rpm | 5.27 kg5270 g |
| FAG6222-M-C4Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 5800 rpm | 5.27 kg5270 g |
| FAG6222-M-J20AADeep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 5800 rpm | 5.4 kg5400 g |
| FAG6222-M-J20AA-C3Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 5800 rpm | 5.4 kg5400 g |
| FAG6222-M-J20AA-C4Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 5800 rpm | 5.4 kg5400 g |
| FAG6222-M-J20GA-C3Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 5800 rpm | 5.3 kg5300 g |
| FAG6222-M-J20GA-C4Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 5800 rpm | 5.3 kg5300 g |
| FAG6222-ZDeep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.72 kg4720 g |
| FAG6222-Z-C3Deep groove ball bearing |
| 153 kN | 117 kN | 4500 rpm | 4450 rpm | 4.72 kg4720 g |
| TIMKEN6222-2RSDeep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.36 kg4360 g |
| TIMKEN6222-2RS-C3Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.44 kg4440 g |
| TIMKEN6222-2RZ-C3Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.44 kg4440 g |
| TIMKEN6222-C3Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.36 kg4360 g |
| TIMKEN6222M-C3Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 5.33 kg5330 g |
| TIMKEN6222-RS-C3Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.44 kg4440 g |
| TIMKEN6222/VSL609Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.36 kg4360 g |
| TIMKEN6222-ZDeep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.36 kg4360 g |
| TIMKEN6222-Z-C3Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.36 kg4360 g |
| TIMKEN6222-ZZDeep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.36 kg4360 g |
| TIMKEN6222-ZZ-C3Deep groove ball bearing |
| 144 kN | 117 kN | — | — | 4.36 kg4360 g |
| NSK6222DDUDeep groove ball bearing |
| 159 kN | 117 kN | — | — | — |
| NSK6222VVDeep groove ball bearing |
| 159 kN | 117 kN | — | — | — |
| NSK6222ZZDeep groove ball bearing |
| 159 kN | 117 kN | — | — | — |
| KOYO6222 2RSDeep groove ball bearing |
| 180 kN | 117 kN | — | 2000 rpmLimiting Speeds(Grease Lub.): 2000 min-1 | 4.36 kg4360 g |
| KOYO6222 2RUDeep groove ball bearing |
| 180 kN | 117 kN | — | 3100 rpmLimiting Speeds(Grease Lub.): 3100 min-1 | 4.36 kg4360 g |
| KOYO6222NRDeep groove ball bearing |
| 180 kN | 117 kN | — | 3100 rpmLimiting Speeds(Grease Lub.): 3100 min-1Limiting Speeds(Oil Lub.): 3700 min-1 | 4.36 kg4360 g |
| KOYO6222 ZZXDeep groove ball bearing |
| 180 kN | 117 kN | — | 3100 rpmLimiting Speeds(Grease Lub.): 3100 min-1 | 4.36 kg4360 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 62/22 | Without | Normal | CN | Sheet metal | Bearing steel | None |
| SKF 6222 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6222 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6222 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6222 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 62/22 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6222 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 62/22 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6222-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6222-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6222-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6222 2ZJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6222/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6222/C3S1 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6222/C3VL0241 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6222/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6222/HC5C3 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6222 JEM | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6222 MA/C3B20 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6222 M/C3 | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6222 M/C3VL0241 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6222 M/C4 | Without | Not recorded | C4 | Not recorded | Bearing steel | None |
| SKF 6222 M/C4VL0241 | Without | Not recorded | C4 | Machined brass | Bearing steel | None |
| SKF 6222-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6222 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6222-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6222-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6222-2Z-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6222-C2 | Without — Not sealed | PN — Normal (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6222-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6222-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6222-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6222-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6222-J20GA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6222-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6222-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6222-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6222-M-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6222-M-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6222-M-J20AA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6222-M-J20GA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6222-M-J20GA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6222-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6222-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6222-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222M-C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 6222-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6222-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6222DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6222VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6222ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6222 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6222 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6222NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6222 ZZX | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
62/22
Deep groove ball bearing
View full technical record →SKF6222
Deep groove ball bearing
View full technical record →FAG6222
Deep groove ball bearing
View full technical record →TIMKEN6222
Deep groove ball bearing
View full technical record →KOYO62/22
Deep groove ball bearing
View full technical record →KOYO6222
Deep groove ball bearing
View full technical record →NSK6222
Deep groove ball bearing
View full technical record →NACHI62/22
Deep groove ball bearing
View full technical record →SKF62/22/23
Deep groove ball bearing
View full technical record →NACHI62/22-2NKE9
Deep groove ball bearing
View full technical record →NACHI62/22-2NSE9
Deep groove ball bearing
View full technical record →KOYO62/22 2RD
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.