Find · understand · compare

6219 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6219. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page6 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Source-labelled catalogue reference

6219 — PEER catalogue dimensions

Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.

PEER nominal envelope — d is bore, D is outside diameter, B is width
Full catalogue model	d×D×B (mm)	d×D×B (in)	Closed width / execution scope
PEER · 6200 series6219	95×170×32 mmPrinted metric row	3.7402×6.6929×1.2598 in	Base designation only; complete closure execution must be checked

Read ratings without transferring them to another execution

Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.

Published PEER ratings — N and r/min
Model	Dynamic Cr / static Cor	Open: oil / grease	Evidence boundary
6219	109000 / 82000 N	4400 / 3700 r/min	Base-row catalogue values only; no cross-brand transfer.

Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.

PEER reference and special-bore explanation Other source-labelled variants Replacement checks

Exact model evidence

6219 dimensions and recorded technical data

The recorded 6219 base designation measures 95×170×32 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 66 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6219

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6219 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	95 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.015 to 0 mm
Outside diameter	D	170 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.018 to 0 mm
Width	B	32 mm
Deviation limits of ring width	t ΔBs	-0.1 to 0 mm
Shoulder diameter	d 1	≈ 118.25 mm
Recess diameter	D 2	≈ 151.3 mm
Chamfer dimension	r 1,2	min. 2.1 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 107 mm
Diameter of housing abutment	D a	max. 158 mm
Radius of shaft or housing fillet	r a	max. 2 mm

Open the complete SKF 6219 record →

FAG 6219 — 9 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	95 mm
Outside diameter	D	170 mm
Width	B	32 mm
Minimum chamfer dimension	rmin	2.1 mm
Shoulder diameter outer ring	D1	146.72 mm
Shoulder diameter inner ring	d1	118.66 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	107 mm
Maximum diameter of housing shoulder	Da max	158 mm
Maximum fillet radius	ra max	2.1 mm

Open the complete FAG 6219 record →

KOYO 6219 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	95 mm
Outside diameter	D	170 mm
Width	B	32 mm

Open the complete KOYO 6219 record →

TIMKEN 6219 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	95 mm
O.D. (D)	D	170 mm / 6.693 in
Width (B)	B	32 mm / 1.260 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	2.1 mm / 0.083 in

Open the complete TIMKEN 6219 record →

Check shaft and hole fit →Search measured dimensions →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6219Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	5000 rpm	2.55 kg2550 g
FAG6219Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.73 kg2730 g
TIMKEN6219Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
NSK6219Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Bearing width (B) 32 mm 1.259843 in	120 kN	82 kN	—	—	2.64 kg2640 g
KOYO6219Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	136 kN	81.9 kN	—	3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 4400 min-1	2.62 kg2620 g
SKF6219-2RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	114 kN	81.5 kN	—	2400 rpm	2.65 kg2650 g
SKF6219-2RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	2400 rpm	2.65 kg2650 g
SKF6219-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	4000 rpm	2.69 kg2690 g
SKF6219-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	4000 rpm	2.69 kg2690 g
SKF6219 2ZJEMDeep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	4000 rpm	2.64 kg2640 g
SKF6219/C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	5000 rpm	2.55 kg2550 g
SKF6219/C3VL0241INSOCOAT® deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	5000 rpm	2.63 kg2630 g
SKF6219/C4Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	114 kN	81.5 kN	—	—	2.55 kg2550 g
SKF6219 JEMDeep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	5000 rpm	2.57 kg2570 g
SKF6219 M/C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	5000 rpm	3.18 kg3180 g
SKF6219 M/C3VL0241INSOCOAT® deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	7500 rpm	2.92 kg2920 g
SKF6219-RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	114 kN	81.5 kN	—	2400 rpm	2.55 kg2550 g
SKF6219/VA201Deep groove ball bearing for high temperature applications	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	—	81.5 kN	—	30 rpm	2.63 kg2630 g
SKF6219-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	5000 rpm	2.62 kg2620 g
SKF6219 ZJEMDeep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	114 kN	81.5 kN	8000 rpm	5000 rpm	2.6 kg2600 g
FAG6219-2RSRDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	—	2260 rpm	2.76 kg2760 g
FAG6219-2RSR-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	—	2260 rpm	2.76 kg2760 g
FAG6219-2RSR-J20AA-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	—	2260 rpm	2.73 kg2730 g
FAG6219-2ZDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	4550 rpm	2.73 kg2730 g
FAG6219-2Z-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	4550 rpm	2.73 kg2730 g
FAG6219-C2Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.73 kg2730 g
FAG6219-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.73 kg2730 g
FAG6219-C4Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.73 kg2730 g
FAG6219-J20AADeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.69 kg2690 g
FAG6219-J20AA-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.549 kg2549 g
FAG6219-J20AA-C4Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.549 kg2549 g
FAG6219-J20ABDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.69 kg2690 g
FAG6219-J20AB-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.69 kg2690 g
FAG6219-J20CDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.73 kg2730 g
FAG6219-J20C-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.73 kg2730 g
FAG6219-J20GA-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.69 kg2690 g
FAG6219-J20GB-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.69 kg2690 g
FAG6219-MDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	6900 rpm	3.2 kg3200 g
FAG6219-M-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	6900 rpm	3.2 kg3200 g
FAG6219-M-C4Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	6900 rpm	3.2 kg3200 g
FAG6219-M-J20AA-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	6900 rpm	3.137 kg3137 g
FAG6219-M-J20GA-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	6900 rpm	3.18 kg3180 g
FAG6219-M-J20GC-C4Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	6900 rpm	3.18 kg3180 g
FAG6219-N-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.65 kg2650 g
FAG6219-ZDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.59 kg2590 g
FAG6219-Z-C3Deep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	116 kN	82 kN	4950 rpm	5300 rpm	2.59 kg2590 g
TIMKEN6219-2RSDeep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
TIMKEN6219-2RS-C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
TIMKEN6219-2RS-C3/VSL609Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
TIMKEN6219-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
TIMKEN6219-2RZ-C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.6 kg2600 g
TIMKEN6219-C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
TIMKEN6219-C4Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
TIMKEN6219M-C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	3.17 kg3170 g
TIMKEN6219-RS-C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.6 kg2600 g
TIMKEN6219-ZDeep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
TIMKEN6219-Z-C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.6 kg2600 g
TIMKEN6219-ZZDeep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
TIMKEN6219-ZZ-C3Deep groove ball bearing	Recorded bore (d) 95 mm 3.740157 in Recorded outside dimension (D) 170 mm 6.692913 in Catalogue width (symbol unverified) 32 mm 1.259843 in	109 kN	81.7 kN	—	—	2.62 kg2620 g
NSK6219DDUDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Bearing width (B) 32 mm 1.259843 in	120 kN	82 kN	—	—	—
NSK6219VVDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Bearing width (B) 32 mm 1.259843 in	120 kN	82 kN	—	—	—
NSK6219ZZDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Bearing width (B) 32 mm 1.259843 in	120 kN	82 kN	—	—	—
KOYO6219 2RSDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	136 kN	81.9 kN	—	2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1	2.62 kg2620 g
KOYO6219 2RUDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	136 kN	81.9 kN	—	3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1	2.62 kg2620 g
KOYO6219NRDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	136 kN	81.9 kN	—	3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1Limiting Speeds(Oil Lub.): 4400 min-1	2.62 kg2620 g
KOYO6219 ZZXDeep groove ball bearing	Bore diameter (d) 95 mm 3.740157 in Outside diameter (D) 170 mm 6.692913 in Width (B) 32 mm 1.259843 in	136 kN	81.9 kN	—	3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1	2.62 kg2620 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6219	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 6219	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6219	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6219	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6219	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6219-2RS1	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6219-2RS1/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6219-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6219-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6219 2ZJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6219/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6219/C3VL0241	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6219/C4	Without	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6219 JEM	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6219 M/C3	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6219 M/C3VL0241	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6219-RS1	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6219/VA201	Without	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6219-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6219 ZJEM	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
FAG 6219-2RSR	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6219-2RSR-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6219-2RSR-J20AA-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6219-2Z	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6219-2Z-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6219-C2	Without — Not sealed	PN — Normal (ISO 492:2023)	C2 (Group 2) — Internal clearance smaller than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20AA	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20AA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20AA-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20AB	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20AB-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20C	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20C-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20GA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-J20GB-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-M	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6219-M-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6219-M-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6219-M-J20AA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6219-M-J20GA-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6219-M-J20GC-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6219-N-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-Z	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6219-Z-C3	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6219-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-2RS-C3/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-C4	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219M-C3	Open	Not recorded	Not recorded	Brass cage	Not recorded	Not recorded
TIMKEN 6219-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6219-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6219DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6219VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6219ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6219 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6219 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6219NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6219 ZZX	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →FAG

6219-2RSR

Deep groove ball bearing

View full technical record →

Filter all 67 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6219 — PEER catalogue dimensions

Read ratings without transferring them to another execution

6219 dimensions and recorded technical data

Read the original dimensions for 6219

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

How to compare these values

Related prefix matches — other model numbers may appear

6219

6219

6219

6219

6219

6219-2RS

6219 2RS

6219-2RS1

6219-2RS1/C3

6219-2RS-C3

6219-2RS-C3/VSL609

6219-2RSR

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.