Find · understand · compare
6217 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6217. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6217 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6217 | 85× | 3.3465× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6217 | — | 5000 / 4200 r/min | Load ratings withheld because the printed N/lbf pair needs verification. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6217 dimensions and recorded technical data
The recorded 6217 base designation measures 85×150×28 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 75 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6217
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6217/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 85.0 mm |
| Outside diameter | Not supplied separately | 150.0 mm |
| Width | Not supplied separately | 28.0 mm |
SKF 6217 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 85 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.015 to 0 mm |
| Outside diameter | D | 150 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.015 to 0 mm |
| Width | B | 28 mm |
| Deviation limits of ring width | t ΔBs | -0.1 to 0 mm |
| Shoulder diameter | d 1 | ≈ 106.05 mm |
| Recess diameter | D 2 | ≈ 134.3 mm |
| Chamfer dimension | r 1,2 | min. 2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 96 mm |
| Diameter of housing abutment | D a | max. 139 mm |
| Radius of shaft or housing fillet | r a | max. 2 mm |
FAG 6217 — 9 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 85 mm |
| Outside diameter | D | 150 mm |
| Width | B | 28 mm |
| Minimum chamfer dimension | rmin | 2 mm |
| Shoulder diameter outer ring | D1 | 129.79 mm |
| Shoulder diameter inner ring | d1 | 106.58 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 96 mm |
| Maximum diameter of housing shoulder | Da max | 139 mm |
| Maximum fillet radius | ra max | 2 mm |
FAG 6217-C3 — 9 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 85 mm |
| Outside diameter | D | 150 mm |
| Width | B | 28 mm |
| Minimum chamfer dimension | rmin | 2 mm |
| Shoulder diameter outer ring | D1 | 129.79 mm |
| Shoulder diameter inner ring | d1 | 106.58 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 96 mm |
| Maximum diameter of housing shoulder | Da max | 139 mm |
| Maximum fillet radius | ra max | 2 mm |
KOYO 6217 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 85 mm |
| Outside diameter | D | 150 mm |
| Width | B | 28 mm |
TIMKEN 6217 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 85 mm |
| O.D. (D) | D | 150 mm / 5.906 in |
| Width (B) | B | 28 mm / 1.102 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.0 mm / 0.079 in |
TIMKEN 6217-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 85 mm |
| O.D. (D) | D | 150 mm / 5.906 in |
| Width (B) | B | 28 mm / 1.102 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.0 mm / 0.079 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6217Deep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.74 kg1740 g |
| FAG6217Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.798 kg1798 g |
| TIMKEN6217Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| NSK6217Deep groove ball bearing |
| 92.5 kN | 62 kN | — | — | 1.76 kg1760 g |
| KOYO6217Deep groove ball bearing |
| 105 kN | 61.9 kN | — | 4200 rpmLimiting Speeds(Grease Lub.): 4200 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.79 kg1790 g |
| SKF6217-2RS1Deep groove ball bearing with seals or shields |
| 87.1 kN | 64 kN | — | 2800 rpm | 1.83 kg1830 g |
| SKF6217-2RS1/C3Deep groove ball bearing with seals or shields |
| 87.1 kN | 64 kN | 9000 rpm | 2800 rpm | 1.79 kg1790 g |
| SKF6217 2RSJEMDeep groove ball bearing |
| 87.1 kN | 64 kN | — | 2800 rpm | 1.62 kg1620 g |
| SKF6217 2RSNRJEMDeep groove ball bearing |
| 87.1 kN | 64 kN | — | 2800 rpm | 1.62 kg1620 g |
| SKF6217-2ZDeep groove ball bearing with seals or shields |
| 87.1 kN | 64 kN | 9000 rpm | 4500 rpm | 1.83 kg1830 g |
| SKF6217-2Z/C3Deep groove ball bearing with seals or shields |
| 87.1 kN | 64 kN | 9000 rpm | 4500 rpm | 1.83 kg1830 g |
| SKF6217-2Z/C3S1GJNDeep groove ball bearing with seals or shields |
| 87.1 kN | 64 kN | 9000 rpm | 4500 rpm | 1.67 kg1670 g |
| SKF6217 2ZJEMDeep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 4500 rpm | 1.62 kg1620 g |
| SKF6217-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 64 kN | — | 30 rpm | 1.86 kg1860 g |
| SKF6217/C3Deep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.74 kg1740 g |
| SKF6217/C3VL0241INSOCOAT® deep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.74 kg1740 g |
| SKF6217/C4Deep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.75 kg1750 g |
| SKF6217/HC5C3Hybrid ceramic deep groove ball bearing |
| 83.2 kN | 64 kN | 11000 rpm | 6700 rpm | 1.53 kg1530 g |
| SKF6217 JEMDeep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.6 kg1600 g |
| SKF6217 MDeep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 8000 rpm | 2.13 kg2130 g |
| SKF6217 M/C3Deep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 8000 rpm | 2 kg2000 g |
| SKF6217 M/C4VL0241INSOCOAT® deep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 8000 rpm | 2.02 kg2020 g |
| SKF6217 M/HC5C4HS0Hybrid ceramic deep groove ball bearing |
| 83.2 kN | 64 kN | 11000 rpm | 8000 rpm | 1.83 kg1830 g |
| SKF6217 NRDeep groove ball bearing with snap ring |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.6 kg1600 g |
| SKF6217 NR/C3Deep groove ball bearing with snap ring |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.86 kg1860 g |
| SKF6217-RS1Deep groove ball bearing with seals or shields |
| 87.1 kN | 64 kN | — | 2800 rpm | 1.75 kg1750 g |
| SKF6217/VA201Deep groove ball bearing for high temperature applications |
| — | 64 kN | — | 40 rpm | 1.8 kg1800 g |
| SKF6217-ZDeep groove ball bearing with seals or shields |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.78 kg1780 g |
| SKF6217-Z/C3Deep groove ball bearing with seals or shields |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.78 kg1780 g |
| SKF6217 ZJEMDeep groove ball bearing |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.6 kg1600 g |
| SKF6217-ZNR/C3Deep groove ball bearing with snap ring and integral sealing |
| 87.1 kN | 64 kN | 9000 rpm | 5600 rpm | 1.85 kg1850 g |
| FAG6217-2RSRDeep groove ball bearing |
| 89 kN | 64 kN | — | 2500 rpm | 1.87 kg1870 g |
| FAG6217-2RSR-C3Deep groove ball bearing |
| 89 kN | 64 kN | — | 2500 rpm | 1.87 kg1870 g |
| FAG6217-2RSR-L100-C3Deep groove ball bearing |
| 89 kN | 64 kN | — | 2500 rpm | 1.8 kg1800 g |
| FAG6217-2ZDeep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 5700 rpm | 1.86 kg1860 g |
| FAG6217-2Z-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 5700 rpm | 1.86 kg1860 g |
| FAG6217-2Z-C4Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 5700 rpm | 1.86 kg1860 g |
| FAG6217-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.798 kg1798 g |
| FAG6217-C4Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.798 kg1798 g |
| FAG6217-J20AADeep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.84 kg1840 g |
| FAG6217-J20AA-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.801 kg1801 g |
| FAG6217-J20GA-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.82 kg1820 g |
| FAG6217-MDeep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 8800 rpm | 2.16 kg2160 g |
| FAG6217-M-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 8800 rpm | 2.136 kg2136 g |
| FAG6217-M-C4Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 8800 rpm | 2.16 kg2160 g |
| FAG6217-M-J20AADeep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 8800 rpm | 2.14 kg2140 g |
| FAG6217-M-J20AA-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 8800 rpm | 2.14 kg2140 g |
| FAG6217-M-J20AA-C4Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 8800 rpm | 2.14 kg2140 g |
| FAG6217-M-J20GA-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 8800 rpm | 2.12 kg2120 g |
| FAG6217-NDeep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.838 kg1838 g |
| FAG6217-N-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.838 kg1838 g |
| FAG6217-NR-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.838 kg1838 g |
| FAG6217-TVHDeep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.812 kg1812 g |
| FAG6217-TVH-C4Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.812 kg1812 g |
| FAG6217-ZDeep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.74 kg1740 g |
| FAG6217-Z-C3Deep groove ball bearing |
| 89 kN | 64 kN | 5300 rpm | 6700 rpm | 1.74 kg1740 g |
| TIMKEN6217-2RSDeep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217-2RS-C3Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217-2RS-C3/VSL609Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217-2RS/VSL609Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217-2RZ-C3Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.8 kg1800 g |
| TIMKEN6217-C3Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217M-C3Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 2.18 kg2180 g |
| TIMKEN6217/VSL609Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217-ZDeep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217-Z-C3Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217-ZZDeep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| TIMKEN6217-ZZ-C3Deep groove ball bearing |
| 83.2 kN | 64 kN | — | — | 1.79 kg1790 g |
| NSK6217DDUDeep groove ball bearing |
| 92.5 kN | 62 kN | — | — | — |
| NSK6217VVDeep groove ball bearing |
| 92.5 kN | 62 kN | — | — | — |
| NSK6217ZZDeep groove ball bearing |
| 92.5 kN | 62 kN | — | — | — |
| KOYO6217 2RSDeep groove ball bearing |
| 105 kN | 61.9 kN | — | 2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1 | 1.79 kg1790 g |
| KOYO6217 2RUDeep groove ball bearing |
| 105 kN | 61.9 kN | — | 4200 rpmLimiting Speeds(Grease Lub.): 4200 min-1 | 1.79 kg1790 g |
| KOYO6217NRDeep groove ball bearing |
| 105 kN | 61.9 kN | — | 4200 rpmLimiting Speeds(Grease Lub.): 4200 min-1Limiting Speeds(Oil Lub.): 5000 min-1 | 1.79 kg1790 g |
| KOYO6217 ZZDeep groove ball bearing |
| 105 kN | 61.9 kN | — | 4200 rpmLimiting Speeds(Grease Lub.): 4200 min-1 | 1.79 kg1790 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6217 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6217 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6217 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6217 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6217 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6217-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6217-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6217 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6217 2RSNRJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6217-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6217-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6217-2Z/C3S1GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6217 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6217-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6217/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6217/C3VL0241 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6217/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6217/HC5C3 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6217 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6217 M | Without | P6 and tighter width tolerance | CN | Machined brass | Bearing steel | None |
| SKF 6217 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6217 M/C4VL0241 | Without | Not recorded | C4 | Machined brass | Bearing steel | None |
| SKF 6217 M/HC5C4HS0 | Without | Not recorded | C4H | Machined brass | Hybrid (ceramic balls) | None |
| SKF 6217 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6217 NR/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6217-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6217/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6217-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6217-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6217 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6217-ZNR/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6217-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6217-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6217-2RSR-L100-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6217-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6217-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6217-2Z-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6217-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-J20GA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6217-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6217-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6217-M-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6217-M-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6217-M-J20AA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6217-M-J20GA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6217-N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-N-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-NR-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-TVH | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 6217-TVH-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 6217-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6217-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6217-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217M-C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 6217/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6217-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6217DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6217VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6217ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6217 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6217 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6217NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6217 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6217
Deep groove ball bearing
View full technical record →FAG6217
Deep groove ball bearing
View full technical record →TIMKEN6217
Deep groove ball bearing
View full technical record →KOYO6217
Deep groove ball bearing
View full technical record →NSK6217
Deep groove ball bearing
View full technical record →TIMKEN6217-2RS
Deep groove ball bearing
View full technical record →KOYO6217 2RS
Deep groove ball bearing
View full technical record →SKF6217-2RS1
Deep groove ball bearing with seals or shields
View full technical record →SKF6217-2RS1/C3
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6217-2RS-C3
Deep groove ball bearing
View full technical record →TIMKEN6217-2RS-C3/VSL609
Deep groove ball bearing
View full technical record →SKF6217 2RSJEM
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.