Find · understand · compare
6216 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6216. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6216 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6216 | 80× | 3.1496× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6216 | 72500 / 53000 N | 5300 / 4500 r/min | Base-row catalogue values only; no cross-brand transfer. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6216 dimensions and recorded technical data
The recorded 6216 base designation measures 80×140×26 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 103 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6216
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6216/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 80.0 mm |
| Outside diameter | Not supplied separately | 140.0 mm |
| Width | Not supplied separately | 26.0 mm |
SKF 6216 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 80 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.012 to 0 mm |
| Outside diameter | D | 140 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.015 to 0 mm |
| Width | B | 26 mm |
| Deviation limits of ring width | t ΔBs | -0.1 to 0 mm |
| Shoulder diameter | d 1 | ≈ 101.4 mm |
| Recess diameter | D 2 | ≈ 126.5 mm |
| Chamfer dimension | r 1,2 | min. 2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 91 mm |
| Diameter of housing abutment | D a | max. 129 mm |
| Radius of shaft or housing fillet | r a | max. 2 mm |
FAG 6216 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 80 mm |
| Outside diameter | D | 140 mm |
| Width | B | 26 mm |
| Minimum chamfer dimension | rmin | 2 mm |
| Shoulder diameter outer ring | D1 | 121.48 mm |
| Caliber diameter outer ring | D2 | 124.38 mm |
| Shoulder diameter inner ring | d1 | 98.84 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 91 mm |
| Maximum diameter of housing shoulder | Da max | 129 mm |
| Maximum fillet radius | ra max | 2 mm |
FAG 6216-C3 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 80 mm |
| Outside diameter | D | 140 mm |
| Width | B | 26 mm |
| Minimum chamfer dimension | rmin | 2 mm |
| Shoulder diameter outer ring | D1 | 121.48 mm |
| Caliber diameter outer ring | D2 | 124.38 mm |
| Shoulder diameter inner ring | d1 | 98.84 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 91 mm |
| Maximum diameter of housing shoulder | Da max | 129 mm |
| Maximum fillet radius | ra max | 2 mm |
KOYO 6216 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 80 mm |
| Outside diameter | D | 140 mm |
| Width | B | 26 mm |
KOYO 6216 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 80 mm |
| Outside diameter | D | 140 mm |
| Width | B | 26 mm |
TIMKEN 6216-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 80 mm |
| O.D. (D) | D | 140 mm / 5.512 in |
| Width (B) | B | 26 mm / 1.024 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.0 mm / 0.079 in |
TIMKEN 6216-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 80 mm |
| O.D. (D) | D | 140 mm / 5.512 in |
| Width (B) | B | 26 mm / 1.024 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.0 mm / 0.079 in |
TIMKEN 6216 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 80 mm |
| O.D. (D) | D | 140 mm / 5.512 in |
| Width (B) | B | 26 mm / 1.024 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.0 mm / 0.079 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6216Deep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.43 kg1430 g |
| FAG6216Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.432 kg1432 g |
| TIMKEN6216Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| NSK6216Deep groove ball bearing |
| 80 kN | 53 kN | — | — | 1.42 kg1420 g |
| KOYO6216Deep groove ball bearing |
| 90.9 kN | 53 kN | — | 4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1Limiting Speeds(Oil Lub.): 5400 min-1 | 1.4 kg1400 g |
| SKF6216-2RS1Deep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | — | 3000 rpm | 1.47 kg1470 g |
| SKF6216-2RS1/C3Deep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | 9500 rpm | 3000 rpm | 1.47 kg1470 g |
| SKF6216-2RS1/GJNDeep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | — | 3000 rpm | 1.29 kg1290 g |
| SKF6216 2RSJEMDeep groove ball bearing |
| 72.8 kN | 55 kN | — | 3000 rpm | 1.29 kg1290 g |
| SKF6216-2ZDeep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | 9500 rpm | 4800 rpm | 1.49 kg1490 g |
| SKF6216-2Z/C3Deep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | 9500 rpm | 4800 rpm | 1.49 kg1490 g |
| SKF6216-2Z/C4Deep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | 9500 rpm | 4800 rpm | 1.53 kg1530 g |
| SKF6216 2ZJEMDeep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 4800 rpm | 1.29 kg1290 g |
| SKF6216-2Z/LHT23Deep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | 9500 rpm | 4800 rpm | 1.51 kg1510 g |
| SKF6216 2ZNRJEMDeep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 4800 rpm | 1.32 kg1320 g |
| SKF6216-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 55 kN | — | 40 rpm | 1.5 kg1500 g |
| SKF6216/AXDDeep groove ball bearing |
| 88.4 kN | 55 kN | 9500 rpm | 6000 rpm | 1.47 kg1470 g |
| SKF6216/C3Deep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.43 kg1430 g |
| SKF6216/C3VL0241INSOCOAT® deep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.43 kg1430 g |
| SKF6216/C4Deep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.43 kg1430 g |
| SKF6216/HC5C3Hybrid ceramic deep groove ball bearing |
| 70.2 kN | 55 kN | 11000 rpm | 7000 rpm | 1.28 kg1280 g |
| SKF6216 JEMDeep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.26 kg1260 g |
| SKF6216 MDeep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 8500 rpm | 1.68 kg1680 g |
| SKF6216 MA/C3B20Deep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 8500 rpm | 1.71 kg1710 g |
| SKF6216 M/C3Deep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 8500 rpm | 1.67 kg1670 g |
| SKF6216 M/C4Deep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 8500 rpm | 1.71 kg1710 g |
| SKF6216 M/C4VL0241INSOCOAT® deep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 8500 rpm | 1.65 kg1650 g |
| SKF6216 M/HC5P64HS0VG319Hybrid ceramic deep groove ball bearing |
| 70.2 kN | 55 kN | 11000 rpm | 8500 rpm | 1.44 kg1440 g |
| SKF6216 M/HC5P65HS0VG319Hybrid ceramic deep groove ball bearing |
| 70.2 kN | 55 kN | 11000 rpm | 8500 rpm | 1.44 kg1440 g |
| SKF6216 NRDeep groove ball bearing with snap ring |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.48 kg1480 g |
| SKF6216 NRJEMDeep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.3 kg1300 g |
| SKF6216-RS1Deep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | — | 3000 rpm | 1.44 kg1440 g |
| SKF6216 RSJEMDeep groove ball bearing |
| 72.8 kN | 55 kN | — | 3000 rpm | 1.26 kg1260 g |
| SKF6216-ZDeep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.45 kg1450 g |
| SKF6216-Z/C3Deep groove ball bearing with seals or shields |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.47 kg1470 g |
| SKF6216 ZJEMDeep groove ball bearing |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.26 kg1260 g |
| SKF6216-ZNRDeep groove ball bearing with snap ring and integral sealing |
| 72.8 kN | 55 kN | 9500 rpm | 6000 rpm | 1.52 kg1520 g |
| FAG6216-2RSRDeep groove ball bearing |
| 77 kN | 55 kN | — | 2700 rpm | 1.49 kg1490 g |
| FAG6216-2RSR-C3Deep groove ball bearing |
| 77 kN | 55 kN | — | 2700 rpm | 1.49 kg1490 g |
| FAG6216-2RSR-L038-C3Deep groove ball bearing |
| 77 kN | 55 kN | — | 2700 rpm | 1.49 kg1490 g |
| FAG6216-2RSR-L069-C3Deep groove ball bearing |
| 77 kN | 55 kN | — | 2700 rpm | 1.49 kg1490 g |
| FAG6216-2ZDeep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 6200 rpm | 1.49 kg1490 g |
| FAG6216-2Z-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 6200 rpm | 1.49 kg1490 g |
| FAG6216-2Z-L069-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 6200 rpm | 1.49 kg1490 g |
| FAG6216-2Z-L069-C4Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 6200 rpm | 1.494 kg1494 g |
| FAG6216-2Z-L138Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 6200 rpm | 1.448 kg1448 g |
| FAG6216-2Z-L140Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 6200 rpm | 1.49 kg1490 g |
| FAG6216-2Z-L140-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 6200 rpm | 1.49 kg1490 g |
| FAG6216-2Z-L207-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 6200 rpm | 1.49 kg1490 g |
| FAG6216-C2Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.432 kg1432 g |
| FAG6216-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.432 kg1432 g |
| FAG6216-C4Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.432 kg1432 g |
| FAG6216-H-2RSR-SN-C3>NDeep groove ball bearing |
| 65.91 kN | 50.11 kN | — | 2700 rpm | 1.47 kg1470 g |
| FAG6216-H-2RSR-SN>NDeep groove ball bearing |
| 65.91 kN | 50.11 kN | — | 2700 rpm | 1.47 kg1470 g |
| FAG6216-H-2Z-SN-C3>NDeep groove ball bearing |
| 65.91 kN | 50.11 kN | 5600 rpm | 5700 rpm | 1.45 kg1450 g |
| FAG6216-H-2Z-SN>NDeep groove ball bearing |
| 65.91 kN | 50.11 kN | 5600 rpm | 5700 rpm | 1.45 kg1450 g |
| FAG6216-H-SN-C3>NDeep groove ball bearing |
| 65.91 kN | 50.11 kN | 5600 rpm | 6700 rpm | 1.47 kg1470 g |
| FAG6216-H-SN>NDeep groove ball bearing |
| 65.91 kN | 50.11 kN | 5600 rpm | 6700 rpm | 1.47 kg1470 g |
| FAG6216-J20AADeep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.45 kg1450 g |
| FAG6216-J20AA-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.438 kg1438 g |
| FAG6216-J20AA-C4Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.438 kg1438 g |
| FAG6216-J20AB-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.44 kg1440 g |
| FAG6216-J20GA-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.45 kg1450 g |
| FAG6216-J20GA-C4Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.45 kg1450 g |
| FAG6216-MDeep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 9500 rpm | 1.737 kg1737 g |
| FAG6216-M-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 9500 rpm | 1.737 kg1737 g |
| FAG6216-M-C4Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 9500 rpm | 1.737 kg1737 g |
| FAG6216-M-J20AADeep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 9500 rpm | 1.71 kg1710 g |
| FAG6216-M-J20AA-C4Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 9500 rpm | 1.65 kg1650 g |
| FAG6216-M-J20ABDeep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 9500 rpm | 1.7 kg1700 g |
| FAG6216-M-J20AB-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 9500 rpm | 1.7 kg1700 g |
| FAG6216-NDeep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.43 kg1430 g |
| FAG6216-N-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.43 kg1430 g |
| FAG6216-RSRDeep groove ball bearing |
| 77 kN | 55 kN | — | 2700 rpm | 1.47 kg1470 g |
| FAG6216-RSR-J20GA-C3Deep groove ball bearing |
| 77 kN | 55 kN | — | 2700 rpm | 1.46 kg1460 g |
| FAG6216-ZDeep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.47 kg1470 g |
| FAG6216-Z-C3Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.47 kg1470 g |
| FAG6216-Z-C4Deep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.47 kg1470 g |
| FAG6216-Z-NDeep groove ball bearing |
| 77 kN | 55 kN | 5500 rpm | 7300 rpm | 1.44 kg1440 g |
| TIMKEN6216-2RSDeep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-2RS-C3Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-2RS-C3/VSL609Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-2RS/VSL609Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-2RZDeep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-2RZ-C3Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-C3Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216M-C3Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.68 kg1680 g |
| TIMKEN6216-NRDeep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-RSDeep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-RS-C3Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216/VSL609Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-ZDeep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-Z-C3Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-Z-NRDeep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-ZZDeep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| TIMKEN6216-ZZ-C3Deep groove ball bearing |
| 72.7 kN | 53 kN | — | — | 1.4 kg1400 g |
| NSK6216DDUDeep groove ball bearing |
| 80 kN | 53 kN | — | — | — |
| NSK6216VVDeep groove ball bearing |
| 80 kN | 53 kN | — | — | — |
| NSK6216ZZDeep groove ball bearing |
| 80 kN | 53 kN | — | — | — |
| KOYO6216 2RSDeep groove ball bearing |
| 90.9 kN | 53 kN | — | 2900 rpmLimiting Speeds(Grease Lub.): 2900 min-1 | 1.4 kg1400 g |
| KOYO6216 2RUDeep groove ball bearing |
| 90.9 kN | 53 kN | — | 4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1 | 1.4 kg1400 g |
| KOYO6216NRDeep groove ball bearing |
| 90.9 kN | 53 kN | — | 4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1Limiting Speeds(Oil Lub.): 5400 min-1 | 1.4 kg1400 g |
| KOYO6216 ZZDeep groove ball bearing |
| 90.9 kN | 53 kN | — | 4500 rpmLimiting Speeds(Grease Lub.): 4500 min-1 | 1.4 kg1400 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6216 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6216 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6216 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6216 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6216 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6216-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6216-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6216-2RS1/GJN | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6216 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6216-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6216-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6216-2Z/C4 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6216 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6216-2Z/LHT23 | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6216 2ZNRJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6216-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6216/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6216/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6216/C3VL0241 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6216/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6216/HC5C3 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6216 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6216 M | Without | P6 and tighter width tolerance | CN | Machined brass | Bearing steel | None |
| SKF 6216 MA/C3B20 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6216 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6216 M/C4 | Without | Not recorded | C4 | Machined brass | Bearing steel | None |
| SKF 6216 M/C4VL0241 | Without | Not recorded | C4 | Machined brass | Bearing steel | None |
| SKF 6216 M/HC5P64HS0VG319 | Without | Not recorded | C4H | Machined brass | Hybrid (ceramic balls) | None |
| SKF 6216 M/HC5P65HS0VG319 | Without | Not recorded | C5H | Machined brass | Hybrid (ceramic balls) | None |
| SKF 6216 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6216 NRJEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6216-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6216 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6216-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6216-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6216 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6216-ZNR | Shield on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| FAG 6216-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6216-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6216-2RSR-L038-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6216-2RSR-L069-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6216-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6216-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6216-2Z-L069-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6216-2Z-L069-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6216-2Z-L138 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6216-2Z-L140 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6216-2Z-L140-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6216-2Z-L207-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6216-C2 | Without — Not sealed | PN — Normal (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-H-2RSR-SN-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6216-H-2RSR-SN>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6216-H-2Z-SN-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6216-H-2Z-SN>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6216-H-SN-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-H-SN>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-J20AA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-J20AA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-J20AB-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-J20GA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-J20GA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6216-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6216-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6216-M-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6216-M-J20AA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6216-M-J20AB | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6216-M-J20AB-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6216-N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-N-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-RSR | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-RSR-J20GA-C3 | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-Z-C4 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6216-Z-N | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6216-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216M-C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 6216-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6216-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6216DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6216VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6216ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6216 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6216 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6216NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6216 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6216
Deep groove ball bearing
View full technical record →FAG6216
Deep groove ball bearing
View full technical record →TIMKEN6216
Deep groove ball bearing
View full technical record →KOYO6216
Deep groove ball bearing
View full technical record →NSK6216
Deep groove ball bearing
View full technical record →TIMKEN621 / 612
Tapered roller bearing
View full technical record →KOYO621/612
Tapered roller bearing
View full technical record →TIMKEN621 / 612A
Tapered roller bearing
View full technical record →TIMKEN621 / 612-S
Tapered roller bearing
View full technical record →TIMKEN621 / 613-S
Tapered roller bearing
View full technical record →TIMKEN621 / 614X
Tapered roller bearing
View full technical record →TIMKEN6216-2RS
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.