Find · understand · compare

6213 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6213. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page6 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Source-labelled catalogue reference

6213 — PEER catalogue dimensions

Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.

PEER nominal envelope — d is bore, D is outside diameter, B is width
Full catalogue model	d×D×B (mm)	d×D×B (in)	Closed width / execution scope
PEER · 6200 series6213	65×120×23 mmPrinted metric row	2.5591×4.7244×.9055 in	Base designation only; complete closure execution must be checked

Read ratings without transferring them to another execution

Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.

Published PEER ratings — N and r/min
Model	Dynamic Cr / static Cor	Open: oil / grease	Evidence boundary
6213	57500 / 40000 N	6500 / 5500 r/min	Base-row catalogue values only; no cross-brand transfer.

Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.

PEER reference and special-bore explanation Other source-labelled variants Replacement checks

Exact model evidence

6213 dimensions and recorded technical data

The recorded 6213 base designation measures 65×120×23 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 106 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6213

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6213/C3 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	65.0 mm
Outside diameter	Not supplied separately	120.0 mm
Width	Not supplied separately	23.0 mm

Open the complete SKF 6213/C3 record →

SKF 6213 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	65 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.012 to 0 mm
Outside diameter	D	120 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	23 mm
Deviation limits of ring width	t ΔBs	-0.1 to 0 mm
Shoulder diameter	d 1	≈ 83.3 mm
Recess diameter	D 2	≈ 105.8 mm
Chamfer dimension	r 1,2	min. 1.5 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 74 mm
Diameter of housing abutment	D a	max. 111 mm
Radius of shaft or housing fillet	r a	max. 1.5 mm

Open the complete SKF 6213 record →

FAG 6213 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	65 mm
Outside diameter	D	120 mm
Width	B	23 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	103.16 mm
Caliber diameter outer ring	D2	106.34 mm
Shoulder diameter inner ring	d1	82.32 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	74 mm
Maximum diameter of housing shoulder	Da max	111 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6213 record →

FAG 6213-C3 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	65 mm
Outside diameter	D	120 mm
Width	B	23 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	103.16 mm
Caliber diameter outer ring	D2	106.34 mm
Shoulder diameter inner ring	d1	82.32 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	74 mm
Maximum diameter of housing shoulder	Da max	111 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6213-C3 record →

KOYO 6213 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	65 mm
Outside diameter	D	120 mm
Width	B	23 mm

Open the complete KOYO 6213 record →

KOYO 6213 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	65 mm
Outside diameter	D	120 mm
Width	B	23 mm

Open the complete KOYO 6213 2RS record →

KOYO 6213 ZZ — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	65 mm
Outside diameter	D	120 mm
Width	B	23 mm

Open the complete KOYO 6213 ZZ record →

TIMKEN 6213-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	65 mm
O.D. (D)	D	120 mm / 4.724 in
Width (B)	B	23 mm / 0.906 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6213-C3 record →

TIMKEN 6213-ZZ — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	65 mm
O.D. (D)	D	120 mm / 4.724 in
Width (B)	B	23 mm / 0.906 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6213-ZZ record →

TIMKEN 6213 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	65 mm
O.D. (D)	D	120 mm / 4.724 in
Width (B)	B	23 mm / 0.906 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6213 record →

TIMKEN 6213-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	65 mm
O.D. (D)	D	120 mm / 4.724 in
Width (B)	B	23 mm / 0.906 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6213-2RS record →

Check shaft and hole fit →Search measured dimensions →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6213Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	0.99 kg990 g
FAG6213Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.95 kg950 g
TIMKEN6213Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
NSK6213Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Bearing width (B) 23 mm 0.905512 in	63 kN	40 kN	—	—	1 kg1000 g
KOYO6213Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	71.5 kN	40.1 kN	—	5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1Limiting Speeds(Oil Lub.): 6400 min-1	0.99 kg990 g
SKF6213-2RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	—	3600 rpm	1.02 kg1020 g
SKF6213-2RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	3600 rpm	1.02 kg1020 g
SKF6213-2RS1/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	—	3600 rpm	1.02 kg1020 g
SKF6213-2RS1/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	55.9 kN	40.5 kN	—	3600 rpm	0.916 kg916 g
SKF6213 2RSJEMDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	—	3600 rpm	1.02 kg1020 g
SKF6213 2RSNRJEMDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	—	3600 rpm	1.06 kg1060 g
SKF6213-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	6000 rpm	1.03 kg1030 g
SKF6213-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	6000 rpm	1.03 kg1030 g
SKF6213-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	6000 rpm	1.03 kg1030 g
SKF6213-2Z/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	6000 rpm	1.03 kg1030 g
SKF6213-2Z/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	55.9 kN	40.5 kN	14000 rpm	7500 rpm	0.93 kg930 g
SKF6213 2ZJEMDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	6000 rpm	1.04 kg1040 g
SKF6213-2ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	6000 rpm	1.08 kg1080 g
SKF6213 2ZNRJEMDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	6000 rpm	1.08 kg1080 g
SKF6213-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	—	40.5 kN	—	50 rpm	1.03 kg1030 g
SKF6213-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	—	40.5 kN	—	40 rpm	0.994 kg994 g
SKF6213-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	—	40.5 kN	—	90 rpm	1.03 kg1030 g
SKF6213/AXDDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	70.2 kN	40.5 kN	12000 rpm	7500 rpm	1.02 kg1020 g
SKF6213/C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	0.99 kg990 g
SKF6213/C4Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	0.99 kg990 g
SKF6213/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	55.9 kN	40.5 kN	14000 rpm	8500 rpm	0.884 kg884 g
SKF6213 JEMDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	0.996 kg996 g
SKF6213 MDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	10000 rpm	1.16 kg1160 g
SKF6213 M/C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	10000 rpm	1.16 kg1160 g
SKF6213 NDeep groove ball bearing with snap ring groove	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	0.977 kg977 g
SKF6213 NRDeep groove ball bearing with snap ring	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	1.03 kg1030 g
SKF6213 NR/C3Deep groove ball bearing with snap ring	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	1.03 kg1030 g
SKF6213 NRJEMDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	10000 rpm	1.04 kg1040 g
SKF6213-RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	—	3600 rpm	0.998 kg998 g
SKF6213 RSJEMDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	—	3600 rpm	0.998 kg998 g
SKF6213/VA201Deep groove ball bearing for high temperature applications	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	—	40.5 kN	—	50 rpm	0.975 kg975 g
SKF6213-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	1 kg1000 g
SKF6213-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	1 kg1000 g
SKF6213 ZJEMDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	1.01 kg1010 g
SKF6213-ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	58.5 kN	40.5 kN	12000 rpm	7500 rpm	1.04 kg1040 g
FAG6213-2RSRDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	—	3250 rpm	0.964 kg964 g
FAG6213-2RSR-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	—	3250 rpm	0.964 kg964 g
FAG6213-2RSR-L038-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	—	3250 rpm	0.988 kg988 g
FAG6213-2RSR-L138-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	—	3250 rpm	0.98 kg980 g
FAG6213-2RSR-L140Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	—	3250 rpm	0.982 kg982 g
FAG6213-2RSR-L140-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	—	3250 rpm	0.982 kg982 g
FAG6213-2ZDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	1 kg1000 g
FAG6213-2Z-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	1 kg1000 g
FAG6213-2Z-C4Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	1 kg1000 g
FAG6213-2Z-L038-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	0.982 kg982 g
FAG6213-2Z-L069-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	0.99 kg990 g
FAG6213-2Z-L138-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	0.99 kg990 g
FAG6213-2Z-L140Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	0.982 kg982 g
FAG6213-2Z-L140-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	0.982 kg982 g
FAG6213-2Z-L207-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	0.982 kg982 g
FAG6213-2Z-L408-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	7300 rpm	0.985 kg985 g
FAG6213-C2Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.95 kg950 g
FAG6213-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.95 kg950 g
FAG6213-C4Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.95 kg950 g
FAG6213-H-2RSR-SN-C3>NDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	57.19 kN	40.15 kN	—	3250 rpm	0.966 kg966 g
FAG6213-H-2RSR-SN>NDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	57.19 kN	40.15 kN	—	3250 rpm	0.966 kg966 g
FAG6213-H-2Z-SN-C3>NDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	57.19 kN	40.15 kN	6200 rpm	6600 rpm	0.956 kg956 g
FAG6213-H-2Z-SN>NDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	57.19 kN	40.15 kN	6200 rpm	6600 rpm	0.956 kg956 g
FAG6213-H-SN-C3>NDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	57.19 kN	40.15 kN	6200 rpm	7800 rpm	0.969 kg969 g
FAG6213-H-SN>NDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	57.19 kN	40.15 kN	6200 rpm	7800 rpm	0.969 kg969 g
FAG6213-J20ABDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	1 kg1000 g
FAG6213-J20AB-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.979 kg979 g
FAG6213-MDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	11200 rpm	1.163 kg1163 g
FAG6213-M-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	11200 rpm	1.16 kg1160 g
FAG6213-M-C4Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	11200 rpm	1.133 kg1133 g
FAG6213-NDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.959 kg959 g
FAG6213-N-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.959 kg959 g
FAG6213-N-M-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	11200 rpm	1.199 kg1199 g
FAG6213-NRDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.984 kg984 g
FAG6213-RSRDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	—	3250 rpm	0.99 kg990 g
FAG6213-RSR-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	—	3250 rpm	0.99 kg990 g
FAG6213-ZDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.96 kg960 g
FAG6213-Z-C3Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.96 kg960 g
FAG6213-Z-C4Deep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.96 kg960 g
FAG6213-Z-NDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	63 kN	41.5 kN	6300 rpm	8600 rpm	0.96 kg960 g
TIMKEN6213-2RSDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-2RS-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-2RS-C3/VSL609Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-2RZDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-2RZ-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213M-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	1.22 kg1220 g
TIMKEN6213-NRDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-NR-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-RSDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-RS-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213/VSL609Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-ZDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-Z-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-Z-NRDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-Z-NR-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-ZZDeep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
TIMKEN6213-ZZ-C3Deep groove ball bearing	Recorded bore (d) 65 mm 2.559055 in Recorded outside dimension (D) 120 mm 4.724409 in Catalogue width (symbol unverified) 23 mm 0.905512 in	57.2 kN	40 kN	—	—	0.99 kg990 g
NSK6213DDUDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Bearing width (B) 23 mm 0.905512 in	63 kN	40 kN	—	—	—
NSK6213VVDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Bearing width (B) 23 mm 0.905512 in	63 kN	40 kN	—	—	—
NSK6213ZZDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Bearing width (B) 23 mm 0.905512 in	63 kN	40 kN	—	—	—
KOYO6213 2RSDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	71.5 kN	40.1 kN	—	3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1	0.99 kg990 g
KOYO6213 2RUDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	71.5 kN	40.1 kN	—	5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1	0.99 kg990 g
KOYO6213NRDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	71.5 kN	40.1 kN	—	5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1Limiting Speeds(Oil Lub.): 6400 min-1	0.99 kg990 g
KOYO6213 ZZDeep groove ball bearing	Bore diameter (d) 65 mm 2.559055 in Outside diameter (D) 120 mm 4.724409 in Width (B) 23 mm 0.905512 in	71.5 kN	40.1 kN	—	5400 rpmLimiting Speeds(Grease Lub.): 5400 min-1	0.99 kg990 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6213	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 6213	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6213	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6213	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6213	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6213-2RS1	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6213-2RS1/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6213-2RS1/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6213-2RS1/HC5C3WT	Seal on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6213 2RSJEM	Seal on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6213 2RSNRJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6213-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6213-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6213-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6213-2Z/C4	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6213-2Z/HC5C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6213 2ZJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6213-2ZNR	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6213 2ZNRJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6213-2Z/VA201	Shield on both sides	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6213-2Z/VA208	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6213-2Z/VA228	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6213/AXD	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6213/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6213/C4	Without	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6213/HC5C3	Without	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6213 JEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6213 M	Without	P6 and tighter width tolerance	CN	Machined brass	Bearing steel	None
SKF 6213 M/C3	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6213 N	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6213 NR	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6213 NR/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6213 NRJEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6213-RS1	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6213 RSJEM	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6213/VA201	Without	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6213-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6213-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6213 ZJEM	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6213-ZNR	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 6213-2RSR	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6213-2RSR-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6213-2RSR-L038-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6213-2RSR-L138-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6213-2RSR-L140	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6213-2RSR-L140-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6213-2Z	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6213-2Z-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6213-2Z-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6213-2Z-L038-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6213-2Z-L069-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6213-2Z-L138-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6213-2Z-L140	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6213-2Z-L140-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6213-2Z-L207-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6213-2Z-L408-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L408 — Grease (L408/customer specific)
FAG 6213-C2	Without — Not sealed	PN — Normal (ISO 492:2023)	C2 (Group 2) — Internal clearance smaller than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-H-2RSR-SN-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6213-H-2RSR-SN>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6213-H-2Z-SN-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6213-H-2Z-SN>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6213-H-SN-C3>N	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-H-SN>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-J20AB	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-J20AB-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-M	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6213-M-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6213-M-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6213-N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-N-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-N-M-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6213-NR	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-RSR	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-RSR-C3	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-Z	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-Z-C3	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-Z-C4	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6213-Z-N	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6213-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-2RS-C3/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213M-C3	Open	Not recorded	Not recorded	Brass cage	Not recorded	Not recorded
TIMKEN 6213-NR	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-NR-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213/VSL609	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-Z-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-Z-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6213-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6213DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6213VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6213ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6213 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6213 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6213NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6213 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →TIMKEN

6213-2RS-C3

Deep groove ball bearing

View full technical record →

Filter all 106 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6213 — PEER catalogue dimensions

Read ratings without transferring them to another execution

6213 dimensions and recorded technical data

Read the original dimensions for 6213

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

How to compare these values

Related prefix matches — other model numbers may appear

6213

6213

6213

6213

6213

6213-2RS

6213 2RS

6213-2RS1

6213-2RS1/C3

6213-2RS1/C3GJN

6213-2RS1/HC5C3WT

6213-2RS-C3

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.