Find · understand · compare
6212 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6212. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6212 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6212 | 60× | 2.3622× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6212 | 52500 / 36000 N | 7000 / 6000 r/min | Base-row catalogue values only; no cross-brand transfer. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6212 dimensions and recorded technical data
The recorded 6212 base designation measures 60×110×22 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 134 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6212
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6212-Z — 13 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.012 to 0 mm |
| Outside diameter | D | 110 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.013 to 0 mm |
| Width | B | 22 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 75.5 mm |
| Recess diameter | D 2 | ≈ 98 mm |
| Chamfer dimension | r 1,2 | min. 1.5 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 69 mm |
| Diameter of shaft abutment | d a | max. 75.4 mm |
| Diameter of housing abutment | D a | max. 101 mm |
| Radius of shaft or housing fillet | r a | max. 1.5 mm |
SKF 6212/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 60.0 mm |
| Outside diameter | Not supplied separately | 110.0 mm |
| Width | Not supplied separately | 22.0 mm |
SKF 6212 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.012 to 0 mm |
| Outside diameter | D | 110 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.013 to 0 mm |
| Width | B | 22 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 75.5 mm |
| Recess diameter | D 2 | ≈ 98 mm |
| Chamfer dimension | r 1,2 | min. 1.5 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 69 mm |
| Diameter of housing abutment | D a | max. 101 mm |
| Radius of shaft or housing fillet | r a | max. 1.5 mm |
FAG 6212 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Outside diameter | D | 110 mm |
| Width | B | 22 mm |
| Minimum chamfer dimension | rmin | 1.5 mm |
| Shoulder diameter outer ring | D1 | 95.82 mm |
| Caliber diameter outer ring | D2 | 97.68 mm |
| Shoulder diameter inner ring | d1 | 75.75 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 69 mm |
| Maximum diameter of housing shoulder | Da max | 101 mm |
| Maximum fillet radius | ra max | 1.5 mm |
FAG 6212-C3 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Outside diameter | D | 110 mm |
| Width | B | 22 mm |
| Minimum chamfer dimension | rmin | 1.5 mm |
| Shoulder diameter outer ring | D1 | 95.82 mm |
| Caliber diameter outer ring | D2 | 97.68 mm |
| Shoulder diameter inner ring | d1 | 75.75 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 69 mm |
| Maximum diameter of housing shoulder | Da max | 101 mm |
| Maximum fillet radius | ra max | 1.5 mm |
FAG 6212-Z — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Outside diameter | D | 110 mm |
| Width | B | 22 mm |
| Minimum chamfer dimension | rmin | 1.5 mm |
| Shoulder diameter outer ring | D1 | 95.82 mm |
| Caliber diameter outer ring | D2 | 97.68 mm |
| Shoulder diameter inner ring | d1 | 75.75 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 69 mm |
| Maximum diameter of housing shoulder | Da max | 101 mm |
| Maximum fillet radius | ra max | 1.5 mm |
KOYO 6212 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Outside diameter | D | 110 mm |
| Width | B | 22 mm |
KOYO 6212 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Outside diameter | D | 110 mm |
| Width | B | 22 mm |
KOYO 6212 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Outside diameter | D | 110 mm |
| Width | B | 22 mm |
TIMKEN 6212-Z — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 60 mm |
| O.D. (D) | D | 110 mm / 4.331 in |
| Width (B) | B | 22 mm / 0.866 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.5 mm / 0.059 in |
TIMKEN 6212-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 60 mm |
| O.D. (D) | D | 110 mm / 4.331 in |
| Width (B) | B | 22 mm / 0.866 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.5 mm / 0.059 in |
TIMKEN 6212-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 60 mm |
| O.D. (D) | D | 110 mm / 4.331 in |
| Width (B) | B | 22 mm / 0.866 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.5 mm / 0.059 in |
TIMKEN 6212 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 60 mm |
| O.D. (D) | D | 110 mm / 4.331 in |
| Width (B) | B | 22 mm / 0.866 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.5 mm / 0.059 in |
TIMKEN 6212-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 60 mm |
| O.D. (D) | D | 110 mm / 4.331 in |
| Width (B) | B | 22 mm / 0.866 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.5 mm / 0.059 in |
Catalogue parameters for 6212
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6212 — 45 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 60.0 mm |
| Outside diameter | Not separately recorded | 110.0 mm |
| Width | Not separately recorded | 22.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 55.3 kN |
| Basic static load rating | Not separately recorded | 36.0 kN |
| Reference speed | Not separately recorded | 13000.0 r/min |
| Limiting speed | Not separately recorded | 8000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 2.8 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.755 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.012 to 0 mm |
| Outside diameter | D | 110 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.013 to 0 mm |
| Width | B | 22 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 75.5 mm |
| Recess diameter | D 2 | ≈ 98 mm |
| Chamfer dimension | r 1,2 | min. 1.5 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 69 mm |
| Diameter of housing abutment | D a | max. 101 mm |
| Radius of shaft or housing fillet | r a | max. 1.5 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 55.3 kN |
| Basic static load rating | C 0 | 36 kN |
| Fatigue load limit | P u | 1.53 kN |
| Reference speed | Not separately recorded | 13000 r/min |
| Limiting speed | Not separately recorded | 8000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 14.3 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 10 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 18 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P6 |
FAG 6212 — 48 recorded parameters
Deep groove ball bearing
Reference: Schaeffler medias — FAG; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Main Dimensions & Performance Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 60 mm |
| Bore diameter | d | 2.362 in |
| Outside diameter | D | 110 mm |
| Outside diameter | D | 4.331 in |
| Width | B | 22 mm |
| Width | B | 0.866 in |
| Basic dynamic load rating, radial | Cr | 57,000 N |
| Basic dynamic load rating, radial | Cr | 12,814.748 lbf |
| Basic static load rating, radial | C0r | 36,500 N |
| Basic static load rating, radial | C0r | 8,205.935 lbf |
| Fatigue load limit, radial | Cur | 2,550 N |
| Fatigue load limit, radial | Cur | 573.291 lbf |
| Limiting speed | nG | 9,300 1/min |
| Reference speed | nϑr | 6,800 1/min |
| Mass | ≈m | 0.767 kg |
| Mass | ≈m | 1.691 lbs |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 69 mm |
| Minimum diameter shaft shoulder | da min | 2.717 in |
| Maximum diameter of housing shoulder | Da max | 101 mm |
| Maximum diameter of housing shoulder | Da max | 3.976 in |
| Maximum fillet radius | ra max | 1.5 mm |
| Maximum fillet radius | ra max | 0.059 in |
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.5 mm |
| Minimum chamfer dimension | rmin | 0.059 in |
| Shoulder diameter outer ring | D1 | 95.82 mm |
| Shoulder diameter outer ring | D1 | 3.772 in |
| Caliber diameter outer ring | D2 | 97.68 mm |
| Caliber diameter outer ring | D2 | 3.846 in |
| Shoulder diameter inner ring | d1 | 75.75 mm |
| Shoulder diameter inner ring | d1 | 2.982 in |
Temperature range
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C |
| Operating temperature min. | Tmin | -22 °F |
| Operating temperature max. | Tmax | 150 °C |
| Operating temperature max. | Tmax | 302 °F |
Calculation factors
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Calculation factor | f0 | 14.5 |
Product characteristics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Type of Seal | Without | Not sealed |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | S0 | Rings dimensional stabilized up to 150° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Capabilities & suitability
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Radial load capacity | Not separately recorded | Yes |
| Axial load capacity in one direction | Not separately recorded | Yes |
| Axial load capacity in both directions | Not separately recorded | Yes |
| Suitable for grease lubrication | Not separately recorded | Yes |
| Suitable for oil lubrication | Not separately recorded | Yes |
| Unsealed design | Not separately recorded | Yes |
KOYO 6212 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 60 mm |
| D | Not separately recorded | 110 mm |
| B | Not separately recorded | 22 mm |
| R(Min.) | Not separately recorded | 1.5 mm |
| Basic Load Ratings : Cr | Not separately recorded | 65.6 kN |
| Basic Load Ratings : C0R | Not separately recorded | 36.2 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 2.40 kN |
| Factor : F0 | Not separately recorded | 14.4 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 5700 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 6900 min-1 |
| Da(Min.) | Not separately recorded | 68 mm |
| Da(Max.) | Not separately recorded | 102 mm |
| Ra(Max.) | Not separately recorded | 1.5 mm |
| Mass(Refer.) | Not separately recorded | 0.783 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6212Deep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.755 kg755 g |
| FAG6212Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.767 kg767 g |
| TIMKEN6212Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| NSK6212Deep groove ball bearing |
| 57.5 kN | 36 kN | — | — | 0.783 kg783 g |
| KOYO6212Deep groove ball bearing |
| 65.6 kN | 36.2 kN | — | 5700 rpmLimiting Speeds(Grease Lub.): 5700 min-1Limiting Speeds(Oil Lub.): 6900 min-1 | 0.783 kg783 g |
| SKF6212-2RS1Deep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.788 kg788 g |
| SKF6212-2RS1/C3Deep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 4000 rpm | 0.787 kg787 g |
| SKF6212-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.78 kg780 g |
| SKF6212-2RS1/GJNDeep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.78 kg780 g |
| SKF6212-2RS1/HC5C3S0WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 52.7 kN | 36 kN | — | 4000 rpm | 0.713 kg713 g |
| SKF6212-2RS1/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 52.7 kN | 36 kN | — | 4000 rpm | 0.713 kg713 g |
| SKF6212-2RS1/W64Deep groove ball bearing |
| 55.3 kN | 36 kN | — | 2800 rpm | 0.797 kg797 g |
| SKF6212 2RSJEMDeep groove ball bearing |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.78 kg780 g |
| SKF6212 2RSNRJEMDeep groove ball bearing |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.783 kg783 g |
| SKF6212-2ZDeep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 6300 rpm | 0.789 kg789 g |
| SKF6212-2Z/C3Deep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 6300 rpm | 0.797 kg797 g |
| SKF6212-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 6300 rpm | 0.808 kg808 g |
| SKF6212-2Z/C4Deep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 6300 rpm | 0.789 kg789 g |
| SKF6212-2Z/C4GJNDeep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 6300 rpm | 0.78 kg780 g |
| SKF6212 2ZJEMDeep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 6300 rpm | 0.808 kg808 g |
| SKF6212-2ZNRDeep groove ball bearing with snap ring and integral sealing |
| 55.3 kN | 36 kN | 13000 rpm | 6300 rpm | 0.825 kg825 g |
| SKF6212 2ZNRJEMDeep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 6300 rpm | 0.785 kg785 g |
| SKF6212-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 36 kN | — | 50 rpm | 0.808 kg808 g |
| SKF6212-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 36 kN | — | 50 rpm | 0.761 kg761 g |
| SKF6212-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 36 kN | — | 100 rpm | 0.808 kg808 g |
| SKF6212/AXDDeep groove ball bearing |
| 66.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.78 kg780 g |
| SKF6212/C3Deep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.755 kg755 g |
| SKF6212/C4Deep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.755 kg755 g |
| SKF6212/C5Deep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.755 kg755 g |
| SKF6212/HC5C3Hybrid ceramic deep groove ball bearing |
| 52.7 kN | 36 kN | 15000 rpm | 9500 rpm | 0.659 kg659 g |
| SKF6212 JEMDeep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 11000 rpm | 0.776 kg776 g |
| SKF6212 MDeep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 11000 rpm | 0.954 kg954 g |
| SKF6212 M/C3Deep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 11000 rpm | 0.93 kg930 g |
| SKF6212 M/HC5C4S0Hybrid ceramic deep groove ball bearing |
| 52.7 kN | 36 kN | 15000 rpm | 11000 rpm | 0.798 kg798 g |
| SKF6212 M/HC5C5S0Hybrid ceramic deep groove ball bearing |
| 52.7 kN | 36 kN | 15000 rpm | 11000 rpm | 0.798 kg798 g |
| SKF6212 M/P65HS0VL0241INSOCOAT® deep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 11000 rpm | 0.892 kg892 g |
| SKF6212 NDeep groove ball bearing with snap ring groove |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.754 kg754 g |
| SKF6212 NRDeep groove ball bearing with snap ring |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.782 kg782 g |
| SKF6212 NR/C3Deep groove ball bearing with snap ring |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.782 kg782 g |
| SKF6212/P52Deep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.758 kg758 g |
| SKF6212-RS1Deep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.769 kg769 g |
| SKF6212-RS1Z/C3GJNDeep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.785 kg785 g |
| SKF6212-RS1Z/C3S0GJN6Deep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.785 kg785 g |
| SKF6212 RSJEMDeep groove ball bearing |
| 55.3 kN | 36 kN | — | 4000 rpm | 0.798 kg798 g |
| SKF6212/VA201Deep groove ball bearing for high temperature applications |
| — | 36 kN | — | 50 rpm | 0.768 kg768 g |
| SKF6212/VS022Deep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.773 kg773 g |
| SKF6212-ZDeep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.768 kg768 g |
| SKF6212-Z/C3Deep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.773 kg773 g |
| SKF6212-Z/C3GJNDeep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.78 kg780 g |
| SKF6212-Z/C4Deep groove ball bearing with seals or shields |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.783 kg783 g |
| SKF6212 ZJEMDeep groove ball bearing |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.796 kg796 g |
| SKF6212-ZNRDeep groove ball bearing with snap ring and integral sealing |
| 55.3 kN | 36 kN | 13000 rpm | 8000 rpm | 0.804 kg804 g |
| FAG6212-2RSRDeep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.778 kg778 g |
| FAG6212-2RSR-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.778 kg778 g |
| FAG6212-2RSR-L038Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.778 kg778 g |
| FAG6212-2RSR-L038-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.77 kg770 g |
| FAG6212-2RSR-L138-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.775 kg775 g |
| FAG6212-2RSR-L140Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.782 kg782 g |
| FAG6212-2RSR-L140-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.782 kg782 g |
| FAG6212-2RSR-L207-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.78 kg780 g |
| FAG6212-2RSR-L237-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.78 kg780 g |
| FAG6212-2RSR-NDeep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.786 kg786 g |
| FAG6212-2ZDeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.775 kg775 g |
| FAG6212-2Z-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.775 kg775 g |
| FAG6212-2Z-C4Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.775 kg775 g |
| FAG6212-2Z-L038Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.774 kg774 g |
| FAG6212-2Z-L038-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.774 kg774 g |
| FAG6212-2Z-L140Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.775 kg775 g |
| FAG6212-2Z-L140-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.775 kg775 g |
| FAG6212-2Z-L207-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.775 kg775 g |
| FAG6212-2Z-L207-C4Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.799 kg799 g |
| FAG6212-2Z-L408-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.775 kg775 g |
| FAG6212-2Z-L506-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.788 kg788 g |
| FAG6212-2Z-NDeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 7900 rpm | 0.788 kg788 g |
| FAG6212-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.767 kg767 g |
| FAG6212-C4Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.767 kg767 g |
| FAG6212-C4>ADeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.767 kg767 g |
| FAG6212-H-2RSR-SN-C3>NDeep groove ball bearing |
| 47.76 kN | 32.92 kN | — | 3550 rpm | 0.787 kg787 g |
| FAG6212-H-2RSR-SN>NDeep groove ball bearing |
| 47.76 kN | 32.92 kN | — | 3550 rpm | 0.787 kg787 g |
| FAG6212-H-2Z-SN-C3>NDeep groove ball bearing |
| 47.76 kN | 32.92 kN | 6900 rpm | 7300 rpm | 0.778 kg778 g |
| FAG6212-H-2Z-SN>NDeep groove ball bearing |
| 47.76 kN | 32.92 kN | 6900 rpm | 7300 rpm | 0.778 kg778 g |
| FAG6212-H-SN-C3>NDeep groove ball bearing |
| 47.76 kN | 32.92 kN | 6900 rpm | 8600 rpm | 0.807 kg807 g |
| FAG6212-H-SN>NDeep groove ball bearing |
| 47.76 kN | 32.92 kN | 6900 rpm | 8600 rpm | 0.807 kg807 g |
| FAG6212-J20ABDeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.77 kg770 g |
| FAG6212-J20AB-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.771 kg771 g |
| FAG6212-MDeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 12100 rpm | 0.93 kg930 g |
| FAG6212-M-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 12100 rpm | 0.93 kg930 g |
| FAG6212-M-C4Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 12100 rpm | 0.93 kg930 g |
| FAG6212-M-J20AADeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 12100 rpm | 0.95 kg950 g |
| FAG6212-M-J20AA-C4Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 12100 rpm | 0.92 kg920 g |
| FAG6212-NDeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.766 kg766 g |
| FAG6212-N-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.766 kg766 g |
| FAG6212-NRDeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.798 kg798 g |
| FAG6212-RSRDeep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.777 kg777 g |
| FAG6212-RSR-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.777 kg777 g |
| FAG6212-ZDeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.765 kg765 g |
| FAG6212-Z-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.765 kg765 g |
| FAG6212-Z-C4Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.765 kg765 g |
| FAG6212-Z-NDeep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.777 kg777 g |
| FAG6212-Z-N-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | 6800 rpm | 9300 rpm | 0.777 kg777 g |
| FAG6212-Z-RSR-C3Deep groove ball bearing |
| 57 kN | 36.5 kN | — | 3550 rpm | 0.771 kg771 g |
| TIMKEN6212-2RSDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-2RS-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-2RS-C3/VSL609Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-2RS-C4Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-2RS-NRDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-2RS/VSL609Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-2RZDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-2RZ-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-C4Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212M-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.93 kg930 g |
| TIMKEN6212-NRDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-NR-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-NR-C4Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-RSDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-RS-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-ZDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-Z-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-Z-NRDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-Z-NR-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-ZZDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-ZZ-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-ZZ-C4Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-ZZ-NRDeep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| TIMKEN6212-ZZ-NR-C3Deep groove ball bearing |
| 47.7 kN | 32.9 kN | — | — | 0.78 kg780 g |
| NSK6212DDUDeep groove ball bearing |
| 57.5 kN | 36 kN | — | — | — |
| NSK6212VVDeep groove ball bearing |
| 57.5 kN | 36 kN | — | — | — |
| NSK6212ZZDeep groove ball bearing |
| 57.5 kN | 36 kN | — | — | — |
| KOYO6212 2RDDeep groove ball bearing |
| 65.6 kN | 36.2 kN | — | 5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1 | 0.783 kg783 g |
| KOYO6212 2RSDeep groove ball bearing |
| 65.6 kN | 36.2 kN | — | 3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1 | 0.783 kg783 g |
| KOYO6212 2RUDeep groove ball bearing |
| 65.6 kN | 36.2 kN | — | 5700 rpmLimiting Speeds(Grease Lub.): 5700 min-1 | 0.783 kg783 g |
| KOYO6212NRDeep groove ball bearing |
| 65.6 kN | 36.2 kN | — | 5700 rpmLimiting Speeds(Grease Lub.): 5700 min-1Limiting Speeds(Oil Lub.): 6900 min-1 | 0.783 kg783 g |
| KOYO6212 ZZDeep groove ball bearing |
| 65.6 kN | 36.2 kN | — | 5700 rpmLimiting Speeds(Grease Lub.): 5700 min-1 | 0.783 kg783 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6212 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6212 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6212 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6212 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6212 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6212-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6212-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6212-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6212-2RS1/GJN | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6212-2RS1/HC5C3S0WT | Seal on both sides | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | Grease |
| SKF 6212-2RS1/HC5C3WT | Seal on both sides | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | Grease |
| SKF 6212-2RS1/W64 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Solid Oil |
| SKF 6212 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6212 2RSNRJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6212-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6212-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6212-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6212-2Z/C4 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6212-2Z/C4GJN | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6212 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6212-2ZNR | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6212 2ZNRJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6212-2Z/VA201 | Shield on both sides | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6212-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6212-2Z/VA228 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6212/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6212/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6212/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6212/C5 | Without | Not recorded | C5 | Sheet metal | Bearing steel | None |
| SKF 6212/HC5C3 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6212 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6212 M | Without | P6 and tighter width tolerance | CN | Machined brass | Bearing steel | None |
| SKF 6212 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6212 M/HC5C4S0 | Without | Not recorded | C4 | Machined brass | Hybrid (ceramic balls) | None |
| SKF 6212 M/HC5C5S0 | Without | Not recorded | C5 | Machined brass | Hybrid (ceramic balls) | None |
| SKF 6212 M/P65HS0VL0241 | Without | Not recorded | C5H | Machined brass | Bearing steel | None |
| SKF 6212 N | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6212 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6212 NR/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6212/P52 | Without | Not recorded | C2 | Sheet metal | Bearing steel | None |
| SKF 6212-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6212-RS1Z/C3GJN | Seal on one side, shield on the other | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6212-RS1Z/C3S0GJN6 | Seal on one side, shield on the other | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6212 RSJEM | Seal on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6212/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6212/VS022 | Without | Not recorded | NSTD | Sheet metal | Bearing steel | None |
| SKF 6212-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6212-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6212-Z/C3GJN | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6212-Z/C4 | Shield on one side | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6212 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6212-ZNR | Shield on one side | P6 and tighter width tolerance | CN | Not recorded | Bearing steel | None |
| FAG 6212-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6212-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6212-2RSR-L038 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6212-2RSR-L038-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6212-2RSR-L138-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6212-2RSR-L140 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6212-2RSR-L140-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6212-2RSR-L207-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6212-2RSR-L237-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L237 — Grease (L237/customer specific) |
| FAG 6212-2RSR-N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6212-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6212-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6212-2Z-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6212-2Z-L038 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6212-2Z-L038-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6212-2Z-L140 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6212-2Z-L140-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6212-2Z-L207-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6212-2Z-L207-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6212-2Z-L408-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L408 — Grease (L408/customer specific) |
| FAG 6212-2Z-L506-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L506 — Grease (L506/customer specific) |
| FAG 6212-2Z-N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6212-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-C4>A | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-H-2RSR-SN-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6212-H-2RSR-SN>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6212-H-2Z-SN-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6212-H-2Z-SN>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6212-H-SN-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-H-SN>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-J20AB | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-J20AB-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6212-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6212-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6212-M-J20AA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6212-M-J20AA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6212-N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-N-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-NR | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-RSR | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-RSR-C3 | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-Z-C4 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-Z-N | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-Z-N-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6212-Z-RSR-C3 | Z-RSR — Non-contact shield on one Side, Contact seal on the other side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| TIMKEN 6212-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-2RS-C4 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212M-C3 | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| TIMKEN 6212-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-NR-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-NR-C4 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-ZZ-C4 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6212-ZZ-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6212DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6212VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6212ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6212 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6212 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6212 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6212NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6212 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6212
Deep groove ball bearing
View full technical record →FAG6212
Deep groove ball bearing
View full technical record →TIMKEN6212
Deep groove ball bearing
View full technical record →KOYO6212
Deep groove ball bearing
View full technical record →NSK6212
Deep groove ball bearing
View full technical record →KOYO6212 2RD
Deep groove ball bearing
View full technical record →TIMKEN6212-2RS
Deep groove ball bearing
View full technical record →KOYO6212 2RS
Deep groove ball bearing
View full technical record →SKF6212-2RS1
Deep groove ball bearing with seals or shields
View full technical record →SKF6212-2RS1/C3
Deep groove ball bearing with seals or shields
View full technical record →SKF6212-2RS1/C3GJN
Deep groove ball bearing with seals or shields
View full technical record →SKF6212-2RS1/GJN
Deep groove ball bearing with seals or shields
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.