Find · understand · compare

6211 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6211. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page6 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Source-labelled catalogue reference

6211 — PEER catalogue dimensions

Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.

PEER nominal envelope — d is bore, D is outside diameter, B is width
Full catalogue model	d×D×B (mm)	d×D×B (in)	Closed width / execution scope
PEER · 6200 series6211	55×100×21 mmPrinted metric row	2.1654×3.9370×.8268 in	Base designation only; complete closure execution must be checked

Read ratings without transferring them to another execution

Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.

Published PEER ratings — N and r/min
Model	Dynamic Cr / static Cor	Open: oil / grease	Evidence boundary
6211	43500 / 29300 N	7600 / 6400 r/min	Base-row catalogue values only; no cross-brand transfer.

Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.

PEER reference and special-bore explanation Other source-labelled variants Replacement checks

Exact model evidence

6211 dimensions and recorded technical data

The recorded 6211 base designation measures 55×100×21 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 127 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6211

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6211/C3 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	55.0 mm
Outside diameter	Not supplied separately	100.0 mm
Width	Not supplied separately	21.0 mm

Open the complete SKF 6211/C3 record →

SKF 6211 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	55 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.012 to 0 mm
Outside diameter	D	100 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	21 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 69.06 mm
Recess diameter	D 2	≈ 89.4 mm
Chamfer dimension	r 1,2	min. 1.5 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 64 mm
Diameter of housing abutment	D a	max. 91 mm
Radius of shaft or housing fillet	r a	max. 1.5 mm

Open the complete SKF 6211 record →

FAG 6211 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	55 mm
Outside diameter	D	100 mm
Width	B	21 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	86.16 mm
Caliber diameter outer ring	D2	88.2 mm
Shoulder diameter inner ring	d1	68.94 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	64 mm
Maximum diameter of housing shoulder	Da max	91 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6211 record →

FAG 6211-C3 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	55 mm
Outside diameter	D	100 mm
Width	B	21 mm
Minimum chamfer dimension	rmin	1.5 mm
Shoulder diameter outer ring	D1	86.16 mm
Caliber diameter outer ring	D2	88.2 mm
Shoulder diameter inner ring	d1	68.94 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	64 mm
Maximum diameter of housing shoulder	Da max	91 mm
Maximum fillet radius	ra max	1.5 mm

Open the complete FAG 6211-C3 record →

KOYO 6211 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	55 mm
Outside diameter	D	100 mm
Width	B	21 mm

Open the complete KOYO 6211 record →

KOYO 6211 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	55 mm
Outside diameter	D	100 mm
Width	B	21 mm

Open the complete KOYO 6211 2RS record →

KOYO 6211 ZZ — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	55 mm
Outside diameter	D	100 mm
Width	B	21 mm

Open the complete KOYO 6211 ZZ record →

TIMKEN 6211 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	55 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	21 mm / 0.827 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6211 record →

TIMKEN 6211-ZZ — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	55 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	21 mm / 0.827 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6211-ZZ record →

TIMKEN 6211-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	55 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	21 mm / 0.827 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6211-C3 record →

TIMKEN 6211-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	55 mm
O.D. (D)	D	100 mm / 3.937 in
Width (B)	B	21 mm / 0.827 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.5 mm / 0.059 in

Open the complete TIMKEN 6211-2RS record →

Check shaft and hole fit →Search measured dimensions →

Exact designation reference

Catalogue parameters for 6211

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

SKF 6211 FAG 6211 KOYO 6211

SKF 6211 — 45 recorded parameters

Deep groove ball bearing

Reference: SKF product catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	Not separately recorded	55.0 mm
Outside diameter	Not separately recorded	100.0 mm
Width	Not separately recorded	21.0 mm

Performance

Parameter	Source symbol	Recorded value
Basic dynamic load rating	Not separately recorded	46.2 kN
Basic static load rating	Not separately recorded	29.0 kN
Reference speed	Not separately recorded	14000.0 r/min
Limiting speed	Not separately recorded	9000.0 r/min
SKF performance class	Not separately recorded	SKF Explorer

Properties

Parameter	Source symbol	Recorded value
Filling slots	Not separately recorded	Without
Number of rows	Not separately recorded	1
Locating feature, bearing outer ring	Not separately recorded	Without
Bore type	Not separately recorded	Cylindrical
Cage	Not separately recorded	Sheet metal
Matched arrangement	Not separately recorded	No
Radial internal clearance	Not separately recorded	CN
Material, bearing	Not separately recorded	Bearing steel
Coating	Not separately recorded	Without
Sealing	Not separately recorded	Without
Relubrication feature	Not separately recorded	Without
Indicative carbon footprint for new product	Not separately recorded	2.2 kg CO 2 e

Logistics

Parameter	Source symbol	Recorded value
Product net weight	Not separately recorded	0.591 kg

Engineering — Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	55 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.012 to 0 mm
Outside diameter	D	100 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	21 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 69.06 mm
Recess diameter	D 2	≈ 89.4 mm
Chamfer dimension	r 1,2	min. 1.5 mm
ISO tolerance class for dimensions	Not separately recorded	P6 and tighter width tolerance

Engineering — Abutment dimensions

Parameter	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 64 mm
Diameter of housing abutment	D a	max. 91 mm
Radius of shaft or housing fillet	r a	max. 1.5 mm

Engineering — Calculation data

Parameter	Source symbol	Recorded value
SKF performance class	Not separately recorded	SKF Explorer
Basic dynamic load rating	C	46.2 kN
Basic static load rating	C 0	29 kN
Fatigue load limit	P u	1.25 kN
Reference speed	Not separately recorded	14000 r/min
Limiting speed	Not separately recorded	9000 r/min
Minimum load factor	k r	0.03
Calculation factor	f 0	14.3

Engineering — Tolerances of run-out

Parameter	Source symbol	Recorded value
Range of section height at inner ring of assembled bearing	t Kia	10 µm
Range of section height at outer ring of assembled bearing	t Kea	18 µm
ISO tolerance class for geometrical tolerances	Not separately recorded	P6

Open SKF 6211 product record →

FAG 6211 — 48 recorded parameters

Deep groove ball bearing

Reference: Schaeffler medias — FAG; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Main Dimensions & Performance Data

Parameter	Source symbol	Recorded value
Bore diameter	d	55 mm
Bore diameter	d	2.165 in
Outside diameter	D	100 mm
Outside diameter	D	3.937 in
Width	B	21 mm
Width	B	0.827 in
Basic dynamic load rating, radial	Cr	46,000 N
Basic dynamic load rating, radial	Cr	10,341.727 lbf
Basic static load rating, radial	C0r	29,000 N
Basic static load rating, radial	C0r	6,519.784 lbf
Fatigue load limit, radial	Cur	1,770 N
Fatigue load limit, radial	Cur	397.932 lbf
Limiting speed	nG	9,500 1/min
Reference speed	nϑr	7,500 1/min
Mass	≈m	0.63 kg
Mass	≈m	1.389 lbs

Mounting dimensions

Parameter	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	64 mm
Minimum diameter shaft shoulder	da min	2.52 in
Maximum diameter of housing shoulder	Da max	91 mm
Maximum diameter of housing shoulder	Da max	3.583 in
Maximum fillet radius	ra max	1.5 mm
Maximum fillet radius	ra max	0.059 in

Dimensions

Parameter	Source symbol	Recorded value
Minimum chamfer dimension	rmin	1.5 mm
Minimum chamfer dimension	rmin	0.059 in
Shoulder diameter outer ring	D1	86.16 mm
Shoulder diameter outer ring	D1	3.392 in
Caliber diameter outer ring	D2	88.2 mm
Caliber diameter outer ring	D2	3.472 in
Shoulder diameter inner ring	d1	68.94 mm
Shoulder diameter inner ring	d1	2.714 in

Temperature range

Parameter	Source symbol	Recorded value
Operating temperature min.	Tmin	-30 °C
Operating temperature min.	Tmin	-22 °F
Operating temperature max.	Tmax	150 °C
Operating temperature max.	Tmax	302 °F

Calculation factors

Parameter	Source symbol	Recorded value
Calculation factor	f0	14.2

Product characteristics

Parameter	Source symbol	Recorded value
Type of Seal	Without	Not sealed
Cage	JN	Steel sheet metal
Tolerance class	PN	Normal (ISO 492:2023)
Dimensional / heat stabilization	S0	Rings dimensional stabilized up to 150°
Lubricant	Without	Bearing not greased
Radial internal clearance	CN (Group N)	Normal internal clearance
Bore type	Z	Cylindrical

Capabilities & suitability

Parameter	Source symbol	Recorded value
Radial load capacity	Not separately recorded	Yes
Axial load capacity in one direction	Not separately recorded	Yes
Axial load capacity in both directions	Not separately recorded	Yes
Suitable for grease lubrication	Not separately recorded	Yes
Suitable for oil lubrication	Not separately recorded	Yes
Unsealed design	Not separately recorded	Yes

Open FAG 6211 product record →

KOYO 6211 — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	55 mm
D	Not separately recorded	100 mm
B	Not separately recorded	21 mm
R(Min.)	Not separately recorded	1.5 mm
Basic Load Ratings : Cr	Not separately recorded	54.2 kN
Basic Load Ratings : C0R	Not separately recorded	29.4 kN
Fatigue Load Limit : Cu	Not separately recorded	1.95 kN
Factor : F0	Not separately recorded	14.4
Limiting Speeds(Grease Lub.)	Not separately recorded	6300 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	7600 min-1
Da(Min.)	Not separately recorded	63 mm
Da(Max.)	Not separately recorded	92 mm
Ra(Max.)	Not separately recorded	1.5 mm
Mass(Refer.)	Not separately recorded	0.607 kg

Open KOYO 6211 product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6211Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.591 kg591 g
FAG6211Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.63 kg630 g
TIMKEN6211Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
NSK6211Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 21 mm 0.826772 in	47.5 kN	29.3 kN	—	—	0.619 kg619 g
KOYO6211Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	54.2 kN	29.4 kN	—	6300 rpmLimiting Speeds(Grease Lub.): 6300 min-1Limiting Speeds(Oil Lub.): 7600 min-1	0.607 kg607 g
SKF6211-2RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	—	4300 rpm	0.616 kg616 g
SKF6211-2RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	—	4300 rpm	0.616 kg616 g
SKF6211-2RS1/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	—	4300 rpm	0.619 kg619 g
SKF6211-2RS1/GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	—	4300 rpm	0.61 kg610 g
SKF6211-2RS1/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	43.6 kN	29 kN	—	4300 rpm	0.547 kg547 g
SKF6211-2RS1NRDeep groove ball bearing with snap ring and integral sealing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	4300 rpm	0.648 kg648 g
SKF6211 2RSJEMDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	—	4300 rpm	0.619 kg619 g
SKF6211 2RSNRJEMDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	—	4300 rpm	0.615 kg615 g
SKF6211-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	7000 rpm	0.618 kg618 g
SKF6211-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	7000 rpm	0.618 kg618 g
SKF6211-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	7000 rpm	0.618 kg618 g
SKF6211-2Z/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	7000 rpm	0.618 kg618 g
SKF6211 2ZJEMDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	7000 rpm	0.622 kg622 g
SKF6211-2ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	7000 rpm	0.615 kg615 g
SKF6211 2ZNRJEMDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	7000 rpm	0.61 kg610 g
SKF6211-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	—	29 kN	—	60 rpm	0.622 kg622 g
SKF6211-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	—	29 kN	—	50 rpm	0.587 kg587 g
SKF6211-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	—	29 kN	—	110 rpm	0.622 kg622 g
SKF6211/AXDDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	55.3 kN	29 kN	14000 rpm	9000 rpm	0.61 kg610 g
SKF6211/C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.59 kg590 g
SKF6211/C4Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.591 kg591 g
SKF6211/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	43.6 kN	29 kN	16000 rpm	10000 rpm	0.519 kg519 g
SKF6211 JEMDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	13000 rpm	0.594 kg594 g
SKF6211/LHT55VT197Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.59 kg590 g
SKF6211 MDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	13000 rpm	0.7 kg700 g
SKF6211 M/P65HS1VG9054R2Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.6 kN	28 kN	14000 rpm	13000 rpm	0.674 kg674 g
SKF6211 NDeep groove ball bearing with snap ring groove	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.583 kg583 g
SKF6211 NRDeep groove ball bearing with snap ring	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.609 kg609 g
SKF6211 NR/C3Deep groove ball bearing with snap ring	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.609 kg609 g
SKF6211 NRJEMDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	13000 rpm	0.612 kg612 g
SKF6211-RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	—	4300 rpm	0.599 kg599 g
SKF6211-RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	4300 rpm	0.599 kg599 g
SKF6211 RSJEMDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	—	4300 rpm	0.61 kg610 g
SKF6211/VA201Deep groove ball bearing for high temperature applications	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	—	29 kN	—	60 rpm	0.59 kg590 g
SKF6211-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.6 kg600 g
SKF6211-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.6 kg600 g
SKF6211 ZJEMDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.612 kg612 g
SKF6211-ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.619 kg619 g
SKF6211-ZNR/C3Deep groove ball bearing with snap ring and integral sealing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	46.2 kN	29 kN	14000 rpm	9000 rpm	0.608 kg608 g
FAG6211-2RSRDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.64 kg640 g
FAG6211-2RSR-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.64 kg640 g
FAG6211-2RSR-L038Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.64 kg640 g
FAG6211-2RSR-L038-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.64 kg640 g
FAG6211-2RSR-L100-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.62 kg620 g
FAG6211-2RSR-L140Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.616 kg616 g
FAG6211-2RSR-L140-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.616 kg616 g
FAG6211-2RSR-L408-C4Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.605 kg605 g
FAG6211-2ZDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.64 kg640 g
FAG6211-2Z-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.64 kg640 g
FAG6211-2Z-L038Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.64 kg640 g
FAG6211-2Z-L038-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.64 kg640 g
FAG6211-2Z-L038-C4Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.64 kg640 g
FAG6211-2Z-L069-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.614 kg614 g
FAG6211-2Z-L069-C4Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.614 kg614 g
FAG6211-2Z-L138Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.64 kg640 g
FAG6211-2Z-L140Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.614 kg614 g
FAG6211-2Z-L140-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.614 kg614 g
FAG6211-2Z-NRDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.621 kg621 g
FAG6211-2Z-NR-L278Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	8000 rpm	0.65 kg650 g
FAG6211-C-2BRS>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	8800 rpm	0.61 kg610 g
FAG6211-C-2HRS-C3>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	—	5800 rpm	0.595 kg595 g
FAG6211-C-2HRS>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	—	5800 rpm	0.595 kg595 g
FAG6211-C-2Z-C3>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	8800 rpm	0.595 kg595 g
FAG6211-C-2Z-C4>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	8800 rpm	0.593 kg593 g
FAG6211-C-2Z-L069-C4>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	8800 rpm	0.591 kg591 g
FAG6211-C-2Z>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	8800 rpm	0.6 kg600 g
FAG6211-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.582 kg582 g
FAG6211-C4Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.594 kg594 g
FAG6211-C4>ADeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.594 kg594 g
FAG6211-C-C3>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	10400 rpm	0.561 kg561 g
FAG6211-C-C4>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	10400 rpm	0.566 kg566 g
FAG6211-C-HRS>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	—	5800 rpm	0.576 kg576 g
FAG6211-C>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	10400 rpm	0.58 kg580 g
FAG6211-C-Z-C3>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	10400 rpm	0.575 kg575 g
FAG6211-C-Z>VDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	50 kN	29 kN	8300 rpm	10400 rpm	0.575 kg575 g
FAG6211-H-2RSR-SN-C3>NDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	39.07 kN	26.54 kN	—	3900 rpm	0.606 kg606 g
FAG6211-H-2RSR-SN>NDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	39.07 kN	26.54 kN	—	3900 rpm	0.606 kg606 g
FAG6211-H-2Z-SN-C3>NDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	39.07 kN	26.54 kN	7500 rpm	8100 rpm	0.599 kg599 g
FAG6211-H-2Z-SN>NDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	39.07 kN	26.54 kN	7500 rpm	8100 rpm	0.599 kg599 g
FAG6211-H-SN-C3>NDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	39.07 kN	26.54 kN	7500 rpm	9600 rpm	0.611 kg611 g
FAG6211-H-SN>NDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	39.07 kN	26.54 kN	7500 rpm	9600 rpm	0.611 kg611 g
FAG6211-MDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	12300 rpm	0.74 kg740 g
FAG6211-M-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	12300 rpm	0.74 kg740 g
FAG6211-M-C4Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	12300 rpm	0.74 kg740 g
FAG6211-NDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.61 kg610 g
FAG6211-N-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.61 kg610 g
FAG6211-NRDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.607 kg607 g
FAG6211-NR-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.616 kg616 g
FAG6211-NR-H305-C4Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.632 kg632 g
FAG6211-RSRDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.595 kg595 g
FAG6211-RSR-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	—	3900 rpm	0.604 kg604 g
FAG6211-ZDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.61 kg610 g
FAG6211-Z-C3Deep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.604 kg604 g
FAG6211-Z-NDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.62 kg620 g
FAG6211-Z-NRDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	46 kN	29 kN	7500 rpm	9500 rpm	0.63 kg630 g
TIMKEN6211-2RSDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-2RS-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-2RS-C3/VSL609Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-2RZDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.61 kg610 g
TIMKEN6211-2RZ-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.61 kg610 g
TIMKEN6211-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211M-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.72 kg720 g
TIMKEN6211-NRDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-NR-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-RSDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-RS-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-ZDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-Z-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-Z-NRDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.61 kg610 g
TIMKEN6211-Z-NR-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.61 kg610 g
TIMKEN6211-ZZDeep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-ZZ-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
TIMKEN6211-ZZ-NR-C3Deep groove ball bearing	Recorded bore (d) 55 mm 2.165354 in Recorded outside dimension (D) 100 mm 3.937008 in Catalogue width (symbol unverified) 21 mm 0.826772 in	43.4 kN	29.2 kN	—	—	0.6 kg600 g
NSK6211DDUDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 21 mm 0.826772 in	47.5 kN	29.3 kN	—	—	—
NSK6211VVDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 21 mm 0.826772 in	47.5 kN	29.3 kN	—	—	—
NSK6211ZZDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Bearing width (B) 21 mm 0.826772 in	47.5 kN	29.3 kN	—	—	—
KOYO6211 2RDDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	54.2 kN	29.4 kN	—	5700 rpmLimiting Speeds(Grease Lub.): 5700 min-1	0.607 kg607 g
KOYO6211 2RSDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	54.2 kN	29.4 kN	—	4100 rpmLimiting Speeds(Grease Lub.): 4100 min-1	0.607 kg607 g
KOYO6211 2RUDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	54.2 kN	29.4 kN	—	6300 rpmLimiting Speeds(Grease Lub.): 6300 min-1	0.607 kg607 g
KOYO6211NRDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	54.2 kN	29.4 kN	—	6300 rpmLimiting Speeds(Grease Lub.): 6300 min-1Limiting Speeds(Oil Lub.): 7600 min-1	0.607 kg607 g
KOYO6211 ZZDeep groove ball bearing	Bore diameter (d) 55 mm 2.165354 in Outside diameter (D) 100 mm 3.937008 in Width (B) 21 mm 0.826772 in	54.2 kN	29.4 kN	—	6300 rpmLimiting Speeds(Grease Lub.): 6300 min-1	0.607 kg607 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6211	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 6211	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6211	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6211	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6211	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6211-2RS1	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6211-2RS1/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6211-2RS1/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6211-2RS1/GJN	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6211-2RS1/HC5C3WT	Seal on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6211-2RS1NR	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6211 2RSJEM	Seal on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6211 2RSNRJEM	Seal on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6211-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6211-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6211-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6211-2Z/C4	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6211 2ZJEM	Shield on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6211-2ZNR	Shield on both sides	P6 and tighter width tolerance	CN	Not recorded	Bearing steel	Grease
SKF 6211 2ZNRJEM	Shield on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6211-2Z/VA201	Shield on both sides	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6211-2Z/VA208	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6211-2Z/VA228	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6211/AXD	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6211/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6211/C4	Without	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6211/HC5C3	Without	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6211 JEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6211/LHT55VT197	Without	Not recorded	CN	Sheet metal	Bearing steel	None
SKF 6211 M	Without	P6 and tighter width tolerance	CN	Machined brass	Bearing steel	None
SKF 6211 M/P65HS1VG9054R2	Without	Not recorded	C5H	Machined brass	Bearing steel	None
SKF 6211 N	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6211 NR	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6211 NR/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6211 NRJEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6211-RS1	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6211-RS1/C3	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6211 RSJEM	Seal on one side	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6211/VA201	Without	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6211-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6211-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6211 ZJEM	Shield on one side	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6211-ZNR	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6211-ZNR/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
FAG 6211-2RSR	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-2RSR-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-2RSR-L038	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6211-2RSR-L038-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6211-2RSR-L100-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6211-2RSR-L140	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6211-2RSR-L140-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6211-2RSR-L408-C4	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L408 — Grease (L408/customer specific)
FAG 6211-2Z	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-2Z-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-2Z-L038	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6211-2Z-L038-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6211-2Z-L038-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6211-2Z-L069-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6211-2Z-L069-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6211-2Z-L138	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6211-2Z-L140	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6211-2Z-L140-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6211-2Z-NR	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-2Z-NR-L278	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L278 — Grease (L278/customer specific)
FAG 6211-C-2BRS>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-C-2HRS-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-C-2HRS>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-C-2Z-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-C-2Z-C4>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-C-2Z-L069-C4>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6211-C-2Z>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6211-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-C4>A	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-C-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-C-C4>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-C-HRS>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-C>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-C-Z-C3>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-C-Z>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-H-2RSR-SN-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6211-H-2RSR-SN>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6211-H-2Z-SN-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6211-H-2Z-SN>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6211-H-SN-C3>N	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-H-SN>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-M	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6211-M-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6211-M-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6211-N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-N-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-NR	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-NR-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-NR-H305-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-RSR	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-RSR-C3	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-Z	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-Z-C3	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-Z-N	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6211-Z-NR	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6211-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-2RS-C3/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211M-C3	Open	Not recorded	Not recorded	Brass cage	Not recorded	Not recorded
TIMKEN 6211-NR	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-NR-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-Z-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-Z-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6211-ZZ-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6211DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6211VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6211ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6211 2RD	Extremely light contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6211 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6211 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6211NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6211 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →SKF

6211-2RS1/GJN

Deep groove ball bearing with seals or shields

View full technical record →

Filter all 127 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6211 — PEER catalogue dimensions

Read ratings without transferring them to another execution

6211 dimensions and recorded technical data

Read the original dimensions for 6211

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Catalogue parameters for 6211

Dimensions

Performance

Properties

Logistics

Engineering — Dimensions

Engineering — Abutment dimensions

Engineering — Calculation data

Engineering — Tolerances of run-out

Main Dimensions & Performance Data

Mounting dimensions

Dimensions

Temperature range

Calculation factors

Product characteristics

Capabilities & suitability

Technical Data

How to compare these values

Related prefix matches — other model numbers may appear

6211

6211

6211

6211

6211

6211 2RD

6211-2RS

6211 2RS

6211-2RS1

6211-2RS1/C3

6211-2RS1/C3GJN

6211-2RS1/GJN

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.