Find · understand · compare

6210 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6210. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page6 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Source-labelled catalogue reference

6210 — PEER catalogue dimensions

Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.

PEER nominal envelope — d is bore, D is outside diameter, B is width
Full catalogue model	d×D×B (mm)	d×D×B (in)	Closed width / execution scope
PEER · 6200 series6210	50×90×20 mmPrinted metric row	1.9685×3.5433×.7874 in	Base designation only; complete closure execution must be checked

Read ratings without transferring them to another execution

Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.

Published PEER ratings — N and r/min
Model	Dynamic Cr / static Cor	Open: oil / grease	Evidence boundary
6210	35000 / 23200 N	8300 / 7100 r/min	Base-row catalogue values only; no cross-brand transfer.

Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.

PEER reference and special-bore explanation Other source-labelled variants Replacement checks

Exact model evidence

6210 dimensions and recorded technical data

The recorded 6210 base designation measures 50×90×20 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 164 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6210

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6210-Z — 13 dimension fields

Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	50 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.01 to 0 mm
Outside diameter	D	90 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	20 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 62.51 mm
Recess diameter	D 2	≈ 81.61 mm
Chamfer dimension	r 1,2	min. 1.1 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 57 mm
Diameter of shaft abutment	d a	max. 62.4 mm
Diameter of housing abutment	D a	max. 83 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Open the complete SKF 6210-Z record →

SKF 6210/C3 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	50.0 mm
Outside diameter	Not supplied separately	90.0 mm
Width	Not supplied separately	20.0 mm

Open the complete SKF 6210/C3 record →

SKF 6210 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	50 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.01 to 0 mm
Outside diameter	D	90 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	20 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 62.51 mm
Recess diameter	D 2	≈ 81.61 mm
Chamfer dimension	r 1,2	min. 1.1 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 57 mm
Diameter of housing abutment	D a	max. 83 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Open the complete SKF 6210 record →

FAG 6210 — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	50 mm
Outside diameter	D	90 mm
Width	B	20 mm
Minimum chamfer dimension	rmin	1.1 mm
Shoulder diameter outer ring	D1	77.92 mm
Caliber diameter outer ring	D2	80.04 mm
Shoulder diameter inner ring	d1	62 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	57 mm
Maximum diameter of housing shoulder	Da max	83 mm
Maximum fillet radius	ra max	1 mm

Open the complete FAG 6210 record →

FAG 6210-Z — 10 dimension fields

Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	50 mm
Outside diameter	D	90 mm
Width	B	20 mm
Minimum chamfer dimension	rmin	1.1 mm
Shoulder diameter outer ring	D1	77.92 mm
Caliber diameter outer ring	D2	80.04 mm
Shoulder diameter inner ring	d1	62 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	57 mm
Maximum diameter of housing shoulder	Da max	83 mm
Maximum fillet radius	ra max	1 mm

Open the complete FAG 6210-Z record →

KOYO 6210 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	50 mm
Outside diameter	D	90 mm
Width	B	20 mm

Open the complete KOYO 6210 record →

KOYO 6210 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	50 mm
Outside diameter	D	90 mm
Width	B	20 mm

Open the complete KOYO 6210 2RS record →

KOYO 6210 ZZ — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	50 mm
Outside diameter	D	90 mm
Width	B	20 mm

Open the complete KOYO 6210 ZZ record →

TIMKEN 6210-RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	50 mm
O.D. (D)	D	90 mm / 3.543 in
Width (B)	B	20 mm / 0.787 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.1 mm / 0.043 in

Open the complete TIMKEN 6210-RS record →

TIMKEN 6210-Z — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	50 mm
O.D. (D)	D	90 mm / 3.543 in
Width (B)	B	20 mm / 0.787 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.1 mm / 0.043 in

Open the complete TIMKEN 6210-Z record →

TIMKEN 6210-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	50 mm
O.D. (D)	D	90 mm / 3.543 in
Width (B)	B	20 mm / 0.787 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.1 mm / 0.043 in

Open the complete TIMKEN 6210-C3 record →

TIMKEN 6210 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	50 mm
O.D. (D)	D	90 mm / 3.543 in
Width (B)	B	20 mm / 0.787 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.1 mm / 0.043 in

Open the complete TIMKEN 6210 record →

TIMKEN 6210-ZZ — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	50 mm
O.D. (D)	D	90 mm / 3.543 in
Width (B)	B	20 mm / 0.787 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.1 mm / 0.043 in

Open the complete TIMKEN 6210-ZZ record →

TIMKEN 6210-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	50 mm
O.D. (D)	D	90 mm / 3.543 in
Width (B)	B	20 mm / 0.787 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1.1 mm / 0.043 in

Open the complete TIMKEN 6210-2RS record →

Check shaft and hole fit →Search measured dimensions →

Exact designation reference

Catalogue parameters for 6210

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

SKF 6210 FAG 6210 KOYO 6210

SKF 6210 — 45 recorded parameters

Deep groove ball bearing

Reference: SKF product catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	Not separately recorded	50.0 mm
Outside diameter	Not separately recorded	90.0 mm
Width	Not separately recorded	20.0 mm

Performance

Parameter	Source symbol	Recorded value
Basic dynamic load rating	Not separately recorded	37.1 kN
Basic static load rating	Not separately recorded	23.2 kN
Reference speed	Not separately recorded	15000.0 r/min
Limiting speed	Not separately recorded	10000.0 r/min
SKF performance class	Not separately recorded	SKF Explorer

Properties

Parameter	Source symbol	Recorded value
Filling slots	Not separately recorded	Without
Number of rows	Not separately recorded	1
Locating feature, bearing outer ring	Not separately recorded	Without
Bore type	Not separately recorded	Cylindrical
Cage	Not separately recorded	Sheet metal
Matched arrangement	Not separately recorded	No
Radial internal clearance	Not separately recorded	CN
Material, bearing	Not separately recorded	Bearing steel
Coating	Not separately recorded	Without
Sealing	Not separately recorded	Without
Relubrication feature	Not separately recorded	Without
Indicative carbon footprint for new product	Not separately recorded	1.6 kg CO 2 e

Logistics

Parameter	Source symbol	Recorded value
Product net weight	Not separately recorded	0.442 kg

Engineering — Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	50 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.01 to 0 mm
Outside diameter	D	90 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.013 to 0 mm
Width	B	20 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 62.51 mm
Recess diameter	D 2	≈ 81.61 mm
Chamfer dimension	r 1,2	min. 1.1 mm
ISO tolerance class for dimensions	Not separately recorded	P6 and tighter width tolerance

Engineering — Abutment dimensions

Parameter	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 57 mm
Diameter of housing abutment	D a	max. 83 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Engineering — Calculation data

Parameter	Source symbol	Recorded value
SKF performance class	Not separately recorded	SKF Explorer
Basic dynamic load rating	C	37.1 kN
Basic static load rating	C 0	23.2 kN
Fatigue load limit	P u	0.98 kN
Reference speed	Not separately recorded	15000 r/min
Limiting speed	Not separately recorded	10000 r/min
Minimum load factor	k r	0.03
Calculation factor	f 0	14.4

Engineering — Tolerances of run-out

Parameter	Source symbol	Recorded value
Range of section height at inner ring of assembled bearing	t Kia	10 µm
Range of section height at outer ring of assembled bearing	t Kea	18 µm
ISO tolerance class for geometrical tolerances	Not separately recorded	P6

Open SKF 6210 product record →

FAG 6210 — 48 recorded parameters

Deep groove ball bearing

Reference: Schaeffler medias — FAG; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Main Dimensions & Performance Data

Parameter	Source symbol	Recorded value
Bore diameter	d	50 mm
Bore diameter	d	1.969 in
Outside diameter	D	90 mm
Outside diameter	D	3.543 in
Width	B	20 mm
Width	B	0.787 in
Basic dynamic load rating, radial	Cr	39,000 N
Basic dynamic load rating, radial	Cr	8,767.986 lbf
Basic static load rating, radial	C0r	24,200 N
Basic static load rating, radial	C0r	5,440.647 lbf
Fatigue load limit, radial	Cur	1,460 N
Fatigue load limit, radial	Cur	328.237 lbf
Limiting speed	nG	10,500 1/min
Reference speed	nϑr	8,200 1/min
Mass	≈m	453.74 g
Mass	≈m	16.005 oz

Mounting dimensions

Parameter	Source symbol	Recorded value
Minimum diameter shaft shoulder	da min	57 mm
Minimum diameter shaft shoulder	da min	2.244 in
Maximum diameter of housing shoulder	Da max	83 mm
Maximum diameter of housing shoulder	Da max	3.268 in
Maximum fillet radius	ra max	1 mm
Maximum fillet radius	ra max	0.039 in

Dimensions

Parameter	Source symbol	Recorded value
Minimum chamfer dimension	rmin	1.1 mm
Minimum chamfer dimension	rmin	0.043 in
Shoulder diameter outer ring	D1	77.92 mm
Shoulder diameter outer ring	D1	3.068 in
Caliber diameter outer ring	D2	80.04 mm
Caliber diameter outer ring	D2	3.151 in
Shoulder diameter inner ring	d1	62 mm
Shoulder diameter inner ring	d1	2.441 in

Temperature range

Parameter	Source symbol	Recorded value
Operating temperature min.	Tmin	-30 °C
Operating temperature min.	Tmin	-22 °F
Operating temperature max.	Tmax	120 °C
Operating temperature max.	Tmax	248 °F

Calculation factors

Parameter	Source symbol	Recorded value
Calculation factor	f0	14.3

Product characteristics

Parameter	Source symbol	Recorded value
Type of Seal	Without	Not sealed
Cage	JN	Steel sheet metal
Tolerance class	PN	Normal (ISO 492:2023)
Dimensional / heat stabilization	SN	Rings dimensional stabilized up to 120°
Lubricant	Without	Bearing not greased
Radial internal clearance	CN (Group N)	Normal internal clearance
Bore type	Z	Cylindrical

Capabilities & suitability

Parameter	Source symbol	Recorded value
Radial load capacity	Not separately recorded	Yes
Axial load capacity in one direction	Not separately recorded	Yes
Axial load capacity in both directions	Not separately recorded	Yes
Suitable for grease lubrication	Not separately recorded	Yes
Suitable for oil lubrication	Not separately recorded	Yes
Unsealed design	Not separately recorded	Yes

Open FAG 6210 product record →

KOYO 6210 — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	50 mm
D	Not separately recorded	90 mm
B	Not separately recorded	20 mm
R(Min.)	Not separately recorded	1.1 mm
Basic Load Ratings : Cr	Not separately recorded	43.9 kN
Basic Load Ratings : C0R	Not separately recorded	23.3 kN
Fatigue Load Limit : Cu	Not separately recorded	1.55 kN
Factor : F0	Not separately recorded	14.4
Limiting Speeds(Grease Lub.)	Not separately recorded	7100 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	8500 min-1
Da(Min.)	Not separately recorded	56.5 mm
Da(Max.)	Not separately recorded	83.5 mm
Ra(Max.)	Not separately recorded	1 mm
Mass(Refer.)	Not separately recorded	0.463 kg

Open KOYO 6210 product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6210Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.442 kg442 g
FAG6210Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.45374 kg453.74 g
TIMKEN6210Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
NSK6210Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	38.5 kN	23.2 kN	—	—	0.459 kg459 g
KOYO6210Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	43.9 kN	23.3 kN	—	7100 rpmLimiting Speeds(Grease Lub.): 7100 min-1Limiting Speeds(Oil Lub.): 8500 min-1	0.463 kg463 g
NACHI6210Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	44 kN	23.2 kN	—	—	0.463 kg463 g
SKF6210-2RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.459 kg459 g
SKF6210-2RS1/C2GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.463 kg463 g
SKF6210-2RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	4800 rpm	0.459 kg459 g
SKF6210-2RS1/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.459 kg459 g
SKF6210-2RS1/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.463 kg463 g
SKF6210-2RS1/GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.46 kg460 g
SKF6210-2RS1/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	4800 rpm	0.409 kg409 g
SKF6210-2RS1KDeep groove ball bearing with tapered bore and seals on both sides	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	4800 rpm	0.458 kg458 g
SKF6210-2RS1NRDeep groove ball bearing with snap ring and integral sealing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.485 kg485 g
SKF6210-2RS1NR/LHT64Deep groove ball bearing with snap ring and integral sealing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	4800 rpm	0.47 kg470 g
SKF6210-2RS1/W64Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	3300 rpm	0.463 kg463 g
SKF6210-2RSHDeep groove ball bearing with seals	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.463 kg463 g
SKF6210 2RSJEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.467 kg467 g
SKF6210 2RSNRJEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.47 kg470 g
SKF6210-2RZDeep groove ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.459 kg459 g
SKF6210-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.466 kg466 g
SKF6210-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.467 kg467 g
SKF6210-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.465 kg465 g
SKF6210-2Z/C3WTDeep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.466 kg466 g
SKF6210-2Z/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.479 kg479 g
SKF6210-2Z/C4GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.465 kg465 g
SKF6210-2Z/C4GJN6Deep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.465 kg465 g
SKF6210-2Z/HC5C3WTHybrid ceramic deep groove ball bearing with shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.1 kN	23.2 kN	18000 rpm	10000 rpm	0.417 kg417 g
SKF6210 2ZJEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.474 kg474 g
SKF6210-2ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.479 kg479 g
SKF6210 2ZNRJEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	8000 rpm	0.465 kg465 g
SKF6210-2ZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.1 kN	23.2 kN	18000 rpm	10000 rpm	0.405 kg405 g
SKF6210-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	—	23.2 kN	—	60 rpm	0.46 kg460 g
SKF6210-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	—	23.2 kN	—	60 rpm	0.46 kg460 g
SKF6210-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	—	23.2 kN	—	120 rpm	0.46 kg460 g
SKF6210/AXDDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	44.2 kN	23.2 kN	15000 rpm	10000 rpm	0.456 kg456 g
SKF6210/C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.442 kg442 g
SKF6210/C4Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.442 kg442 g
SKF6210/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.1 kN	23.2 kN	18000 rpm	12000 rpm	0.393 kg393 g
SKF6210 JEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.449 kg449 g
SKF6210 MDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	14000 rpm	0.523 kg523 g
SKF6210 MA/C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	14000 rpm	0.53 kg530 g
SKF6210 M/HC5C4S0Hybrid ceramic deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	18000 rpm	14000 rpm	0.473 kg473 g
SKF6210 NDeep groove ball bearing with snap ring groove	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.433 kg433 g
SKF6210 NRDeep groove ball bearing with snap ring	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.456 kg456 g
SKF6210 NR/C3Deep groove ball bearing with snap ring	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.456 kg456 g
SKF6210 NRJEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.467 kg467 g
SKF6210-RS1Deep groove ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.448 kg448 g
SKF6210-RS1/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	4800 rpm	0.448 kg448 g
SKF6210 RSJEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	—	4800 rpm	0.461 kg461 g
SKF6210 TN9/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.1 kN	23.2 kN	18000 rpm	12000 rpm	0.387 kg387 g
SKF6210/VA201Deep groove ball bearing for high temperature applications	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	—	23.2 kN	—	60 rpm	0.447 kg447 g
SKF6210-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.45 kg450 g
SKF6210-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.451 kg451 g
SKF6210-Z/HC5C3Hybrid ceramic deep groove ball bearing with shields	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.1 kN	23.2 kN	18000 rpm	12000 rpm	0.401 kg401 g
SKF6210 ZJEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.466 kg466 g
SKF6210-ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.465 kg465 g
SKF6210 ZNRJEMDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	37.1 kN	23.2 kN	15000 rpm	10000 rpm	0.463 kg463 g
FAG6210-2RSRDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.4704 kg470.4 g
FAG6210-2RSR-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.461 kg461 g
FAG6210-2RSR-L038Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.45668 kg456.68 g
FAG6210-2RSR-L038-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.47 kg470 g
FAG6210-2RSR-L055-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.455 kg455 g
FAG6210-2RSR-L140-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.459 kg459 g
FAG6210-2RSR-L207Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.459 kg459 g
FAG6210-2RSR-L207-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.459 kg459 g
FAG6210-2RSR-NRDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.459 kg459 g
FAG6210-2ZDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.4606 kg460.6 g
FAG6210-2Z-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.4606 kg460.6 g
FAG6210-2Z-C4Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.464 kg464 g
FAG6210-2Z-L038Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.4606 kg460.6 g
FAG6210-2Z-L038-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.4606 kg460.6 g
FAG6210-2Z-L069-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.472 kg472 g
FAG6210-2Z-L069-C4Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.477 kg477 g
FAG6210-2Z-L207Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.464 kg464 g
FAG6210-2Z-L207-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	9000 rpm	0.464 kg464 g
FAG6210-C2Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.463 kg463 g
FAG6210-C-2BRS>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	9900 rpm	0.45 kg450 g
FAG6210-C-2HRS-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.447 kg447 g
FAG6210-C-2HRS-C4>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.45 kg450 g
FAG6210-C-2HRS-L055-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.451 kg451 g
FAG6210-C-2HRS-L138-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.453 kg453 g
FAG6210-C-2HRS-L138>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.453 kg453 g
FAG6210-C-2HRS-L207-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.453 kg453 g
FAG6210-C-2HRS>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.447 kg447 g
FAG6210-C-2Z-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	9900 rpm	0.449 kg449 g
FAG6210-C-2Z-C4>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	9900 rpm	0.449 kg449 g
FAG6210-C-2Z-L138-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	9900 rpm	0.45 kg450 g
FAG6210-C-2Z-L138>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	9900 rpm	0.45 kg450 g
FAG6210-C-2Z-L408-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	9900 rpm	0.45 kg450 g
FAG6210-C-2Z-L506-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	9900 rpm	0.45 kg450 g
FAG6210-C-2Z>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	9900 rpm	0.445 kg445 g
FAG6210-C4Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.45374 kg453.74 g
FAG6210-C-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	11700 rpm	0.421 kg421 g
FAG6210-C-C4>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	11700 rpm	0.421 kg421 g
FAG6210-C-HRS-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.44 kg440 g
FAG6210-C-HRS>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	—	6500 rpm	0.442 kg442 g
FAG6210-CMDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.463 kg463 g
FAG6210-C>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	11700 rpm	0.421 kg421 g
FAG6210-C-Z-C3>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	11700 rpm	0.43 kg430 g
FAG6210-C-Z-C4>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	11700 rpm	0.441 kg441 g
FAG6210-C-Z>VDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	40 kN	23.2 kN	9200 rpm	11700 rpm	0.43 kg430 g
FAG6210-H-2RSR-C3>NDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.07 kN	23.22 kN	—	4300 rpm	0.48 kg480 g
FAG6210-H-2RSR>NDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.07 kN	23.22 kN	—	4300 rpm	0.48 kg480 g
FAG6210-H-2Z-C3>NDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.07 kN	23.22 kN	8100 rpm	8900 rpm	0.478 kg478 g
FAG6210-H-2Z>NDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.07 kN	23.22 kN	8100 rpm	8900 rpm	0.478 kg478 g
FAG6210-H-C3>NDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.07 kN	23.22 kN	8100 rpm	10500 rpm	0.466 kg466 g
FAG6210-H>NDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	35.07 kN	23.22 kN	8100 rpm	10500 rpm	0.466 kg466 g
FAG6210-MDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	13700 rpm	0.56 kg560 g
FAG6210-M-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	13700 rpm	0.56 kg560 g
FAG6210-NDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.44 kg440 g
FAG6210-N-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.442 kg442 g
FAG6210-NRDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.442 kg442 g
FAG6210-NR-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.442 kg442 g
FAG6210-NR-W61BDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.45 kg450 g
FAG6210-RSRDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.44884 kg448.84 g
FAG6210-RSR-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	—	4300 rpm	0.47 kg470 g
FAG6210-W61BDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.473 kg473 g
FAG6210-ZDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.45668 kg456.68 g
FAG6210-Z-C3Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.46 kg460 g
FAG6210-Z-NDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	39 kN	24.2 kN	8200 rpm	10500 rpm	0.44786 kg447.86 g
TIMKEN6210-2RSDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-2RS-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-2RS-C3/VSL609Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-2RS-C4Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-2RS-L671Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-2RS-NRDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-2RZDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.46 kg460 g
TIMKEN6210-2RZ-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.46 kg460 g
TIMKEN6210-2RZ-NR-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.46 kg460 g
TIMKEN6210-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-C4Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.46 kg460 g
TIMKEN6210-NRDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-NR-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-RSDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-RS-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210/VSL609Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-ZDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-Z-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-Z-NRDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.46 kg460 g
TIMKEN6210-Z-NR-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.46 kg460 g
TIMKEN6210-ZZDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-ZZ-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-ZZ-L671Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.45 kg450 g
TIMKEN6210-ZZ-NRDeep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.46 kg460 g
TIMKEN6210-ZZ-NR-C3Deep groove ball bearing	Recorded bore (d) 50 mm 1.968504 in Recorded outside dimension (D) 90 mm 3.543307 in Catalogue width (symbol unverified) 20 mm 0.787402 in	35.1 kN	23.2 kN	—	—	0.46 kg460 g
NSK6210DDUDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	38.5 kN	23.2 kN	—	—	—
NSK6210VVDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	38.5 kN	23.2 kN	—	—	—
NSK6210ZZDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	38.5 kN	23.2 kN	—	—	—
KOYO6210 2RDDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	43.9 kN	23.3 kN	—	6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1	0.463 kg463 g
KOYO6210 2RSDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	43.9 kN	23.3 kN	—	4600 rpmLimiting Speeds(Grease Lub.): 4600 min-1	0.463 kg463 g
KOYO6210 2RUDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	43.9 kN	23.3 kN	—	7100 rpmLimiting Speeds(Grease Lub.): 7100 min-1	0.463 kg463 g
KOYO6210C3+CR1Automotive bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 94 mm 3.700787 in Width (B) 47 mm 1.850394 in	—	—	—	—	—
KOYO6210NRDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	43.9 kN	23.3 kN	—	7100 rpmLimiting Speeds(Grease Lub.): 7100 min-1Limiting Speeds(Oil Lub.): 8500 min-1	0.463 kg463 g
KOYO6210RDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	50.5 kN	25.5 kN	—	7100 rpmLimiting Speeds(Grease Lub.): 7100 min-1Limiting Speeds(Oil Lub.): 8600 min-1	0.487 kg487 g
KOYO6210 ZZDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Width (B) 20 mm 0.787402 in	43.9 kN	23.3 kN	—	7100 rpmLimiting Speeds(Grease Lub.): 7100 min-1	0.463 kg463 g
NACHI6210-2NKE9Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	44 kN	23.2 kN	—	—	—
NACHI6210-2NSE9Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	44 kN	23.2 kN	—	—	—
NACHI6210NKE9Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	44 kN	23.2 kN	—	—	—
NACHI6210NSE9Deep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	44 kN	23.2 kN	—	—	—
NACHI6210ZEDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	44 kN	23.2 kN	—	—	—
NACHI6210ZZEDeep groove ball bearing	Bore diameter (d) 50 mm 1.968504 in Outside diameter (D) 90 mm 3.543307 in Bearing width (B) 20 mm 0.787402 in	44 kN	23.2 kN	—	—	—

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6210	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 6210	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6210	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6210	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6210	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6210	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6210-2RS1	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1/C2GJN	Seal on both sides	Not recorded	C2	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1/C4	Seal on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1/GJN	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1/HC5C3WT	Seal on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6210-2RS1K	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1NR	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1NR/LHT64	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6210-2RS1/W64	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Solid Oil
SKF 6210-2RSH	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6210 2RSJEM	Seal on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6210 2RSNRJEM	Seal on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6210-2RZ	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6210-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6210-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6210-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6210-2Z/C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6210-2Z/C4	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6210-2Z/C4GJN	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6210-2Z/C4GJN6	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6210-2Z/HC5C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6210 2ZJEM	Shield on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6210-2ZNR	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6210 2ZNRJEM	Shield on both sides	Not recorded	C3	Not recorded	Bearing steel	Grease
SKF 6210-2ZTN9/HC5C3WT	Shield on both sides	Not recorded	C3	Non-metallic	Hybrid (ceramic balls)	Grease
SKF 6210-2Z/VA201	Shield on both sides	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6210-2Z/VA208	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6210-2Z/VA228	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6210/AXD	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6210/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6210/C4	Without	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6210/HC5C3	Without	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6210 JEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6210 M	Without	P6 and tighter width tolerance	CN	Machined brass	Bearing steel	None
SKF 6210 MA/C3	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6210 M/HC5C4S0	Without	Not recorded	C4	Machined brass	Hybrid (ceramic balls)	None
SKF 6210 N	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6210 NR	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6210 NR/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6210 NRJEM	Without	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6210-RS1	Seal on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6210-RS1/C3	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6210 RSJEM	Seal on one side	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6210 TN9/HC5C3	Without	Not recorded	C3	Non-metallic	Hybrid (ceramic balls)	None
SKF 6210/VA201	Without	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6210-Z	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6210-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6210-Z/HC5C3	Shield on one side	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6210 ZJEM	Shield on one side	Not recorded	C3	Not recorded	Bearing steel	None
SKF 6210-ZNR	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6210 ZNRJEM	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
FAG 6210-2RSR	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-2RSR-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-2RSR-L038	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6210-2RSR-L038-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6210-2RSR-L055-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L055 — Grease (L055/customer specific)
FAG 6210-2RSR-L140-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6210-2RSR-L207	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6210-2RSR-L207-C3	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6210-2RSR-NR	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-2Z	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-2Z-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-2Z-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-2Z-L038	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6210-2Z-L038-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6210-2Z-L069-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6210-2Z-L069-C4	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6210-2Z-L207	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6210-2Z-L207-C3	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6210-C2	Without — Not sealed	PN — Normal (ISO 492:2023)	C2 (Group 2) — Internal clearance smaller than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C-2BRS>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-C-2HRS-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-C-2HRS-C4>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-C-2HRS-L055-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L055 — Grease (L055/customer specific)
FAG 6210-C-2HRS-L138-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6210-C-2HRS-L138>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6210-C-2HRS-L207-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6210-C-2HRS>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-C-2Z-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-C-2Z-C4>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-C-2Z-L138-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6210-C-2Z-L138>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6210-C-2Z-L408-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L408 — Grease (L408/customer specific)
FAG 6210-C-2Z-L506-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L506 — Grease (L506/customer specific)
FAG 6210-C-2Z>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA13 — Ball bearing and insert bearing grease
FAG 6210-C4	Without — Not sealed	PN — Normal (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C-C4>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C-HRS-C3>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C-HRS>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-CM	Without — Not sealed	PN — Normal (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C-Z-C3>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C-Z-C4>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-C-Z>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-H-2RSR-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6210-H-2RSR>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6210-H-2Z-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6210-H-2Z>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6210-H-C3>N	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-H>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-M	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6210-M-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	M — Solid brass cage, rolling element guided	Not recorded	Without — Bearing not greased
FAG 6210-N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-N-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-NR	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-NR-C3	Without — Not sealed	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-NR-W61B	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-RSR	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-RSR-C3	RSR — Contact seal on one side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-W61B	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-Z	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-Z-C3	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6210-Z-N	Z — Non-contact shield on one Side	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6210-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RS-C3/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RS-C4	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RS-L671	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RS-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-2RZ-NR-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-C4	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-NR	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-NR-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210/VSL609	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-Z-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-Z-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-ZZ-L671	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-ZZ-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6210-ZZ-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6210DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6210VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6210ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6210 2RD	Extremely light contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6210 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6210 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6210C3+CR1	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6210NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6210R	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6210 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6210-2NKE9	Two non-contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6210-2NSE9	Two contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6210NKE9	One non-contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6210NSE9	One contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6210ZE	One shield	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6210ZZE	Two shields	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →SKF

6210-2RS1

Deep groove ball bearing with seals or shields

View full technical record →

Filter all 164 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6210 — PEER catalogue dimensions

Read ratings without transferring them to another execution

6210 dimensions and recorded technical data

Read the original dimensions for 6210

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Catalogue parameters for 6210

Dimensions

Performance

Properties

Logistics

Engineering — Dimensions

Engineering — Abutment dimensions

Engineering — Calculation data

Engineering — Tolerances of run-out

Main Dimensions & Performance Data

Mounting dimensions

Dimensions

Temperature range

Calculation factors

Product characteristics

Capabilities & suitability

Technical Data

How to compare these values

Related prefix matches — other model numbers may appear

6210

6210

6210

6210

6210

6210

6210-2NKE9

6210-2NSE9

6210 2RD

6210-2RS

6210 2RS

6210-2RS1

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.