Find · understand · compare
6209 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6209. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6209 — PEER catalogue dimensions
Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.
| Full catalogue model | d×D×B (mm) | d×D×B (in) | Closed width / execution scope |
|---|---|---|---|
| PEER · 6200 series6209 | 45× | 1.7717× | Base designation only; complete closure execution must be checked |
Read ratings without transferring them to another execution
Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.
| Model | Dynamic Cr / static Cor | Open: oil / grease | Evidence boundary |
|---|---|---|---|
| 6209 | 32700 / 20400 N | 9200 / 7800 r/min | Base-row catalogue values only; no cross-brand transfer. |
Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.
6209 dimensions and recorded technical data
The recorded 6209 base designation measures 45×85×19 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 148 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6209
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6209-2Z/C3 — 3 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 45.0 mm |
| Outside diameter | Not supplied separately | 85.0 mm |
| Width | Not supplied separately | 19.0 mm |
SKF 6209-Z — 13 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 85 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.013 to 0 mm |
| Width | B | 19 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 57.6 mm |
| Recess diameter | D 2 | ≈ 75.19 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 52 mm |
| Diameter of shaft abutment | d a | max. 57.5 mm |
| Diameter of housing abutment | D a | max. 78 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
SKF 6209/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 45.0 mm |
| Outside diameter | Not supplied separately | 85.0 mm |
| Width | Not supplied separately | 19.0 mm |
SKF 6209 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 85 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.013 to 0 mm |
| Width | B | 19 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 57.6 mm |
| Recess diameter | D 2 | ≈ 75.19 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 52 mm |
| Diameter of housing abutment | D a | max. 78 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
FAG 6209 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 85 mm |
| Width | B | 19 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 71.86 mm |
| Caliber diameter outer ring | D2 | 74.62 mm |
| Shoulder diameter inner ring | d1 | 57.2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 52 mm |
| Maximum diameter of housing shoulder | Da max | 78 mm |
| Maximum fillet radius | ra max | 1 mm |
FAG 6209-C3 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 85 mm |
| Width | B | 19 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 71.86 mm |
| Caliber diameter outer ring | D2 | 74.62 mm |
| Shoulder diameter inner ring | d1 | 57.2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 52 mm |
| Maximum diameter of housing shoulder | Da max | 78 mm |
| Maximum fillet radius | ra max | 1 mm |
FAG 6209-Z — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 85 mm |
| Width | B | 19 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 71.86 mm |
| Caliber diameter outer ring | D2 | 74.62 mm |
| Shoulder diameter inner ring | d1 | 57.2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 52 mm |
| Maximum diameter of housing shoulder | Da max | 78 mm |
| Maximum fillet radius | ra max | 1 mm |
FAG 6209-2Z-C3 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 85 mm |
| Width | B | 19 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 71.86 mm |
| Caliber diameter outer ring | D2 | 74.62 mm |
| Shoulder diameter inner ring | d1 | 57.2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 52 mm |
| Maximum diameter of housing shoulder | Da max | 78 mm |
| Maximum fillet radius | ra max | 1 mm |
KOYO 6209 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 85 mm |
| Width | B | 19 mm |
KOYO 6209 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 85 mm |
| Width | B | 19 mm |
KOYO 6209 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 85 mm |
| Width | B | 19 mm |
TIMKEN 6209-RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 85 mm / 3.347 in |
| Width (B) | B | 19 mm / 0.748 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6209-Z — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 85 mm / 3.347 in |
| Width (B) | B | 19 mm / 0.748 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6209-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 85 mm / 3.347 in |
| Width (B) | B | 19 mm / 0.748 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6209-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 85 mm / 3.347 in |
| Width (B) | B | 19 mm / 0.748 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6209 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 85 mm / 3.347 in |
| Width (B) | B | 19 mm / 0.748 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6209-ZZ-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 85 mm / 3.347 in |
| Width (B) | B | 19 mm / 0.748 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6209-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 85 mm / 3.347 in |
| Width (B) | B | 19 mm / 0.748 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
Catalogue parameters for 6209
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6209 — 45 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 45.0 mm |
| Outside diameter | Not separately recorded | 85.0 mm |
| Width | Not separately recorded | 19.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 35.1 kN |
| Basic static load rating | Not separately recorded | 21.6 kN |
| Reference speed | Not separately recorded | 17000.0 r/min |
| Limiting speed | Not separately recorded | 11000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 1.5 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.404 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 85 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.013 to 0 mm |
| Width | B | 19 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 57.6 mm |
| Recess diameter | D 2 | ≈ 75.19 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 52 mm |
| Diameter of housing abutment | D a | max. 78 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 35.1 kN |
| Basic static load rating | C 0 | 21.6 kN |
| Fatigue load limit | P u | 0.915 kN |
| Reference speed | Not separately recorded | 17000 r/min |
| Limiting speed | Not separately recorded | 11000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 14.2 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 10 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 18 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P6 |
FAG 6209 — 48 recorded parameters
Deep groove ball bearing
Reference: Schaeffler medias — FAG; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Main Dimensions & Performance Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Bore diameter | d | 1.772 in |
| Outside diameter | D | 85 mm |
| Outside diameter | D | 3.346 in |
| Width | B | 19 mm |
| Width | B | 0.748 in |
| Basic dynamic load rating, radial | Cr | 33,000 N |
| Basic dynamic load rating, radial | Cr | 7,419.065 lbf |
| Basic static load rating, radial | C0r | 20,300 N |
| Basic static load rating, radial | C0r | 4,563.849 lbf |
| Fatigue load limit, radial | Cur | 1,400 N |
| Fatigue load limit, radial | Cur | 314.748 lbf |
| Limiting speed | nG | 11,600 1/min |
| Reference speed | nϑr | 8,900 1/min |
| Mass | ≈m | 0.404 kg |
| Mass | ≈m | 0.891 lbs |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 52 mm |
| Minimum diameter shaft shoulder | da min | 2.047 in |
| Maximum diameter of housing shoulder | Da max | 78 mm |
| Maximum diameter of housing shoulder | Da max | 3.071 in |
| Maximum fillet radius | ra max | 1 mm |
| Maximum fillet radius | ra max | 0.039 in |
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum chamfer dimension | rmin | 1.1 mm |
| Minimum chamfer dimension | rmin | 0.043 in |
| Shoulder diameter outer ring | D1 | 71.86 mm |
| Shoulder diameter outer ring | D1 | 2.829 in |
| Caliber diameter outer ring | D2 | 74.62 mm |
| Caliber diameter outer ring | D2 | 2.938 in |
| Shoulder diameter inner ring | d1 | 57.2 mm |
| Shoulder diameter inner ring | d1 | 2.252 in |
Temperature range
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Operating temperature min. | Tmin | -30 °C |
| Operating temperature min. | Tmin | -22 °F |
| Operating temperature max. | Tmax | 120 °C |
| Operating temperature max. | Tmax | 248 °F |
Calculation factors
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Calculation factor | f0 | 14.3 |
Product characteristics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Type of Seal | Without | Not sealed |
| Cage | JN | Steel sheet metal |
| Tolerance class | PN | Normal (ISO 492:2023) |
| Dimensional / heat stabilization | SN | Rings dimensional stabilized up to 120° |
| Lubricant | Without | Bearing not greased |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
| Bore type | Z | Cylindrical |
Capabilities & suitability
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Radial load capacity | Not separately recorded | Yes |
| Axial load capacity in one direction | Not separately recorded | Yes |
| Axial load capacity in both directions | Not separately recorded | Yes |
| Suitable for grease lubrication | Not separately recorded | Yes |
| Suitable for oil lubrication | Not separately recorded | Yes |
| Unsealed design | Not separately recorded | Yes |
KOYO 6209 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 45 mm |
| D | Not separately recorded | 85 mm |
| B | Not separately recorded | 19 mm |
| R(Min.) | Not separately recorded | 1.1 mm |
| Basic Load Ratings : Cr | Not separately recorded | 40.9 kN |
| Basic Load Ratings : C0R | Not separately recorded | 20.3 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 1.40 kN |
| Factor : F0 | Not separately recorded | 14.0 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 7700 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 9200 min-1 |
| Da(Min.) | Not separately recorded | 51.5 mm |
| Da(Max.) | Not separately recorded | 78.5 mm |
| Ra(Max.) | Not separately recorded | 1 mm |
| Mass(Refer.) | Not separately recorded | 0.407 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6209Deep groove ball bearing |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.404 kg404 g |
| FAG6209Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.404 kg404 g |
| TIMKEN6209Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| NSK6209Deep groove ball bearing |
| 34.5 kN | 20.4 kN | — | — | 0.42 kg420 g |
| KOYO6209Deep groove ball bearing |
| 40.9 kN | 20.3 kN | — | 7700 rpmLimiting Speeds(Grease Lub.): 7700 min-1Limiting Speeds(Oil Lub.): 9200 min-1 | 0.407 kg407 g |
| NACHI6209Deep groove ball bearing |
| 41 kN | 20.5 kN | — | — | 0.407 kg407 g |
| SKF6209-2RS1Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.418 kg418 g |
| SKF6209-2RS1/C3Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.418 kg418 g |
| SKF6209-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 5000 rpm | 0.418 kg418 g |
| SKF6209-2RS1/C3LHT23Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.418 kg418 g |
| SKF6209-2RS1/C3LHT55Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.41 kg410 g |
| SKF6209-2RS1/C4Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.418 kg418 g |
| SKF6209-2RS1/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 33.2 kN | 21.6 kN | — | 5000 rpm | 0.415 kg415 g |
| SKF6209-2RS1KDeep groove ball bearing with tapered bore and seals on both sides |
| 35.1 kN | 21.6 kN | 17000 rpm | 5000 rpm | 0.415 kg415 g |
| SKF6209-2RS1K/C3Deep groove ball bearing with tapered bore and seals on both sides |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.407 kg407 g |
| SKF6209-2RS1NRDeep groove ball bearing with snap ring and integral sealing |
| 35.1 kN | 21.6 kN | 17000 rpm | 5000 rpm | 0.427 kg427 g |
| SKF6209-2RS1TN9/GJNDeep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 5000 rpm | 0.41 kg410 g |
| SKF6209 2RSJEMDeep groove ball bearing |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.418 kg418 g |
| SKF6209 2RSNRJEMDeep groove ball bearing |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.41 kg410 g |
| SKF6209-2RZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 33.2 kN | 21.6 kN | 20000 rpm | 11000 rpm | 0.361 kg361 g |
| SKF6209-2ZDeep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.42 kg420 g |
| SKF6209-2Z/C3Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.42 kg420 g |
| SKF6209-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.42 kg420 g |
| SKF6209-2Z/C3WTDeep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.42 kg420 g |
| SKF6209-2Z/C4Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.41 kg410 g |
| SKF6209-2Z/C4HTDeep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.42 kg420 g |
| SKF6209-2Z/C5Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.43 kg430 g |
| SKF6209-2Z/HC5C3GJNHybrid ceramic deep groove ball bearing with seals on both sides |
| 33.2 kN | 21.6 kN | 20000 rpm | 11000 rpm | 0.42 kg420 g |
| SKF6209-2Z/HC5C3WTHybrid ceramic deep groove ball bearing with shields |
| 33.2 kN | 21.6 kN | 20000 rpm | 11000 rpm | 0.375 kg375 g |
| SKF6209 2ZJEMDeep groove ball bearing |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.42 kg420 g |
| SKF6209 2ZNRJEMDeep groove ball bearing |
| 35.1 kN | 21.6 kN | 17000 rpm | 8500 rpm | 0.41 kg410 g |
| SKF6209-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 21.6 kN | — | 70 rpm | 0.41 kg410 g |
| SKF6209-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 21.6 kN | — | 60 rpm | 0.406 kg406 g |
| SKF6209-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 21.6 kN | — | 130 rpm | 0.42 kg420 g |
| SKF6209/AXDDeep groove ball bearing |
| 41.6 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.416 kg416 g |
| SKF6209/C3Deep groove ball bearing |
| 33.2 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.404 kg404 g |
| SKF6209/C4Deep groove ball bearing |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.404 kg404 g |
| SKF6209/HC5C3Hybrid ceramic deep groove ball bearing |
| 33.2 kN | 21.6 kN | 20000 rpm | 13000 rpm | 0.359 kg359 g |
| SKF6209 JEMDeep groove ball bearing |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.404 kg404 g |
| SKF6209 NDeep groove ball bearing with snap ring groove |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.397 kg397 g |
| SKF6209 N/C3Deep groove ball bearing with snap ring groove |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.397 kg397 g |
| SKF6209 NRDeep groove ball bearing with snap ring |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.413 kg413 g |
| SKF6209 NRJEMDeep groove ball bearing |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.413 kg413 g |
| SKF6209-RS1Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.408 kg408 g |
| SKF6209 RSJEMDeep groove ball bearing |
| 35.1 kN | 21.6 kN | — | 5000 rpm | 0.408 kg408 g |
| SKF6209 TN9/HC5C3Hybrid ceramic deep groove ball bearing |
| 33.2 kN | 21.6 kN | 20000 rpm | 13000 rpm | 0.356 kg356 g |
| SKF6209 TN9W/C4HDeep groove ball bearing |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.401 kg401 g |
| SKF6209/VA201Deep groove ball bearing for high temperature applications |
| — | 21.6 kN | — | 70 rpm | 0.41 kg410 g |
| SKF6209-ZDeep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.409 kg409 g |
| SKF6209-Z/C3Deep groove ball bearing with seals or shields |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.409 kg409 g |
| SKF6209 ZJEMDeep groove ball bearing |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.409 kg409 g |
| SKF6209-ZNRDeep groove ball bearing with snap ring and integral sealing |
| 35.1 kN | 21.6 kN | 17000 rpm | 11000 rpm | 0.418 kg418 g |
| FAG6209-2RSRDeep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.42 kg420 g |
| FAG6209-2RSR-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.40095 kg400.95 g |
| FAG6209-2RSR-L038Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.43659 kg436.59 g |
| FAG6209-2RSR-L038-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.43659 kg436.59 g |
| FAG6209-2RSR-L100-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.426 kg426 g |
| FAG6209-2RSR-L138-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.417 kg417 g |
| FAG6209-2RSR-L140-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.417 kg417 g |
| FAG6209-2RSR-L207Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.421 kg421 g |
| FAG6209-2RSR-L207-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.421 kg421 g |
| FAG6209-2RSR-L408-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.441 kg441 g |
| FAG6209-2ZDeep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.40887 kg408.87 g |
| FAG6209-2Z-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.40887 kg408.87 g |
| FAG6209-2Z-L038Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.43 kg430 g |
| FAG6209-2Z-L038-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.43758 kg437.58 g |
| FAG6209-2Z-L069-C4Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.441 kg441 g |
| FAG6209-2Z-L138-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.422 kg422 g |
| FAG6209-2Z-L140-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.419 kg419 g |
| FAG6209-2Z-L207Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.419 kg419 g |
| FAG6209-2Z-L207-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.419 kg419 g |
| FAG6209-2Z-L237-C4Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.419 kg419 g |
| FAG6209-2Z-L408-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 9800 rpm | 0.425 kg425 g |
| FAG6209-C-2BRS>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 10800 rpm | 0.415 kg415 g |
| FAG6209-C-2HRS-C2>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | — | 7100 rpm | 0.411 kg411 g |
| FAG6209-C-2HRS-C3>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | — | 7100 rpm | 0.407 kg407 g |
| FAG6209-C-2HRS-C4>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | — | 7100 rpm | 0.411 kg411 g |
| FAG6209-C-2HRS-L207-C3>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | — | 7100 rpm | 0.411 kg411 g |
| FAG6209-C-2HRS>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | — | 7100 rpm | 0.411 kg411 g |
| FAG6209-C-2Z-C3>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 10800 rpm | 0.41 kg410 g |
| FAG6209-C-2Z-L069-C3>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 10800 rpm | 0.409 kg409 g |
| FAG6209-C-2Z-L100-C3>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 10800 rpm | 0.409 kg409 g |
| FAG6209-C-2Z>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 10800 rpm | 0.409 kg409 g |
| FAG6209-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.42471 kg424.71 g |
| FAG6209-C4Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.42471 kg424.71 g |
| FAG6209-C-C3>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 12700 rpm | 0.39 kg390 g |
| FAG6209-C-C4>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 12700 rpm | 0.389 kg389 g |
| FAG6209-C-HRS-C3>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | — | 7100 rpm | 0.398 kg398 g |
| FAG6209-C-HRS>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | — | 7100 rpm | 0.407 kg407 g |
| FAG6209-C>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 12700 rpm | 0.399 kg399 g |
| FAG6209-C-Z-C3>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 12700 rpm | 0.396 kg396 g |
| FAG6209-C-Z>VDeep groove ball bearing |
| 35.5 kN | 20.3 kN | 9900 rpm | 12700 rpm | 0.396 kg396 g |
| FAG6209-H-2RSR-C3>NDeep groove ball bearing |
| 29.36 kN | 19.19 kN | — | 4700 rpm | 0.42 kg420 g |
| FAG6209-H-2RSR>NDeep groove ball bearing |
| 29.36 kN | 19.19 kN | — | 4700 rpm | 0.42 kg420 g |
| FAG6209-H-2Z-C3>NDeep groove ball bearing |
| 29.36 kN | 19.19 kN | 8800 rpm | 9800 rpm | 0.42 kg420 g |
| FAG6209-H-2Z>NDeep groove ball bearing |
| 29.36 kN | 19.19 kN | 8800 rpm | 9800 rpm | 0.42 kg420 g |
| FAG6209-H-C3>NDeep groove ball bearing |
| 29.36 kN | 19.19 kN | 8800 rpm | 11500 rpm | 0.42 kg420 g |
| FAG6209-H>NDeep groove ball bearing |
| 29.36 kN | 19.19 kN | 8800 rpm | 11500 rpm | 0.42 kg420 g |
| FAG6209-NDeep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.39699 kg396.99 g |
| FAG6209-N-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.39699 kg396.99 g |
| FAG6209-NRDeep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.425 kg425 g |
| FAG6209-RSRDeep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.39303 kg393.03 g |
| FAG6209-RSR-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | — | 4650 rpm | 0.43065 kg430.65 g |
| FAG6209-ZDeep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.4059 kg405.9 g |
| FAG6209-Z-C3Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.4059 kg405.9 g |
| FAG6209-Z-C4Deep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.41 kg410 g |
| FAG6209-Z-NDeep groove ball bearing |
| 33 kN | 20.3 kN | 8900 rpm | 11600 rpm | 0.39996 kg399.96 g |
| TIMKEN6209-2RSDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-2RS-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-2RS-C3/VSL609Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-2RS-C4Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-2RS-NRDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-2RS-NR-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-2RS/VSL609Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-2RZDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.42 kg420 g |
| TIMKEN6209-2RZ-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.42 kg420 g |
| TIMKEN6209-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209HDeep groove ball bearing |
| 27.8 kN | 16.4 kN | — | — | 0.4 kg400 g |
| TIMKEN6209H/FVSL527Deep groove ball bearing |
| 27.8 kN | 16.4 kN | — | — | 0.4 kg400 g |
| TIMKEN6209H/FVSL613Deep groove ball bearing |
| 27.8 kN | 16.4 kN | — | — | 0.4 kg400 g |
| TIMKEN6209K-2RSDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209K-2RS-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.42 kg420 g |
| TIMKEN6209-NRDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-NR-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-RSDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-RS-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209/VSL609Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-ZDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-Z-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-Z-NRDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.42 kg420 g |
| TIMKEN6209-Z-NR-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.42 kg420 g |
| TIMKEN6209-ZZDeep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| TIMKEN6209-ZZ-C3Deep groove ball bearing |
| 31.2 kN | 20.3 kN | — | — | 0.4 kg400 g |
| NSK6209DDUDeep groove ball bearing |
| 34.5 kN | 20.4 kN | — | — | — |
| NSK6209VVDeep groove ball bearing |
| 34.5 kN | 20.4 kN | — | — | — |
| NSK6209ZZDeep groove ball bearing |
| 34.5 kN | 20.4 kN | — | — | — |
| KOYO6209 2RDDeep groove ball bearing |
| 40.9 kN | 20.3 kN | — | 6900 rpmLimiting Speeds(Grease Lub.): 6900 min-1 | 0.407 kg407 g |
| KOYO6209 2RSDeep groove ball bearing |
| 40.9 kN | 20.3 kN | — | 5100 rpmLimiting Speeds(Grease Lub.): 5100 min-1 | 0.407 kg407 g |
| KOYO6209 2RUDeep groove ball bearing |
| 40.9 kN | 20.3 kN | — | 7700 rpmLimiting Speeds(Grease Lub.): 7700 min-1 | 0.407 kg407 g |
| KOYO6209C3+CR1Automotive bearing |
| — | — | — | — | — |
| KOYO6209NRDeep groove ball bearing |
| 40.9 kN | 20.3 kN | — | 7700 rpmLimiting Speeds(Grease Lub.): 7700 min-1Limiting Speeds(Oil Lub.): 9200 min-1 | 0.407 kg407 g |
| KOYO6209 ZZDeep groove ball bearing |
| 40.9 kN | 20.3 kN | — | 7700 rpmLimiting Speeds(Grease Lub.): 7700 min-1 | 0.407 kg407 g |
| NACHI6209-2NKE9Deep groove ball bearing |
| 41 kN | 20.5 kN | — | — | — |
| NACHI6209-2NSE9Deep groove ball bearing |
| 41 kN | 20.5 kN | — | — | — |
| NACHI6209NKE9Deep groove ball bearing |
| 41 kN | 20.5 kN | — | — | — |
| NACHI6209NSE9Deep groove ball bearing |
| 41 kN | 20.5 kN | — | — | — |
| NACHI6209ZEDeep groove ball bearing |
| 41 kN | 20.5 kN | — | — | — |
| NACHI6209ZZEDeep groove ball bearing |
| 41 kN | 20.5 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6209 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6209 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6209 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6209 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6209 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6209 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6209-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1/C3LHT23 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1/C3LHT55 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1/C4 | Seal on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1/HC5C3WT | Seal on both sides | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | Grease |
| SKF 6209-2RS1K | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1K/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1NR | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6209-2RS1TN9/GJN | Seal on both sides | Not recorded | CN | Non-metallic | Bearing steel | Grease |
| SKF 6209 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6209 2RSNRJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6209-2RZTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6209-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6209-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2Z/C3WT | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2Z/C4 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2Z/C4HT | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2Z/C5 | Shield on both sides | Not recorded | C5 | Sheet metal | Bearing steel | Grease |
| SKF 6209-2Z/HC5C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | Grease |
| SKF 6209-2Z/HC5C3WT | Shield on both sides | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | Grease |
| SKF 6209 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6209 2ZNRJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6209-2Z/VA201 | Shield on both sides | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6209-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6209-2Z/VA228 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6209/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6209/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6209/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6209/HC5C3 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6209 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6209 N | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6209 N/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6209 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6209 NRJEM | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6209-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6209 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6209 TN9/HC5C3 | Without | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | None |
| SKF 6209 TN9W/C4H | Without | Not recorded | C4H | Non-metallic | Bearing steel | None |
| SKF 6209/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6209-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6209-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6209 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6209-ZNR | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6209-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-2RSR-L038 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6209-2RSR-L038-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6209-2RSR-L100-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6209-2RSR-L138-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6209-2RSR-L140-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6209-2RSR-L207 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6209-2RSR-L207-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6209-2RSR-L408-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L408 — Grease (L408/customer specific) |
| FAG 6209-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-2Z-L038 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6209-2Z-L038-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6209-2Z-L069-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6209-2Z-L138-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6209-2Z-L140-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6209-2Z-L207 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6209-2Z-L207-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6209-2Z-L237-C4 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L237 — Grease (L237/customer specific) |
| FAG 6209-2Z-L408-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L408 — Grease (L408/customer specific) |
| FAG 6209-C-2BRS>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-C-2HRS-C2>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-C-2HRS-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-C-2HRS-L207-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6209-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-C-2Z-L069-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6209-C-2Z-L100-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6209-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6209-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-C-C4>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-C-HRS-C3>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-C-HRS>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-C-Z-C3>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6209-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6209-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6209-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6209-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-N-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-NR | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-RSR | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-RSR-C3 | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-Z-C4 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6209-Z-N | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6209-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-2RS-C4 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-2RS-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209H | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6209H/FVSL527 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6209H/FVSL613 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6209K-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209K-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-NR-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6209-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6209DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6209VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6209ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6209 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6209 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6209 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6209C3+CR1 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6209NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6209 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6209-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6209-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6209NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6209NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6209ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6209ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6209
Deep groove ball bearing
View full technical record →FAG6209
Deep groove ball bearing
View full technical record →TIMKEN6209
Deep groove ball bearing
View full technical record →KOYO6209
Deep groove ball bearing
View full technical record →NSK6209
Deep groove ball bearing
View full technical record →NACHI6209
Deep groove ball bearing
View full technical record →NACHI6209-2NKE9
Deep groove ball bearing
View full technical record →NACHI6209-2NSE9
Deep groove ball bearing
View full technical record →KOYO6209 2RD
Deep groove ball bearing
View full technical record →TIMKEN6209-2RS
Deep groove ball bearing
View full technical record →KOYO6209 2RS
Deep groove ball bearing
View full technical record →SKF6209-2RS1
Deep groove ball bearing with seals or shields
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.