6207Z bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6207Z. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6207Z dimensions and recorded technical data
The recorded 6207Z base designation measures 35×72×17 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 22 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6207Z
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6207-Z — 13 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 35 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 72 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 17 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 46.94 mm |
| Recess diameter | D 2 | ≈ 62.69 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 42 mm |
| Diameter of shaft abutment | d a | max. 46.8 mm |
| Diameter of housing abutment | D a | max. 65 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
FAG 6207-Z — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 35 mm |
| Outside diameter | D | 72 mm |
| Width | B | 17 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 60.66 mm |
| Caliber diameter outer ring | D2 | 63.34 mm |
| Shoulder diameter inner ring | d1 | 47.2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 42 mm |
| Maximum diameter of housing shoulder | Da max | 65 mm |
| Maximum fillet radius | ra max | 1 mm |
KOYO 6207 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 35 mm |
| Outside diameter | D | 72 mm |
| Width | B | 17 mm |
TIMKEN 6207-Z — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 35 mm |
| O.D. (D) | D | 72 mm / 2.835 in |
| Width (B) | B | 17 mm / 0.669 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6207-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 35 mm |
| O.D. (D) | D | 72 mm / 2.835 in |
| Width (B) | B | 17 mm / 0.669 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6207-ZDeep groove ball bearing with seals or shields |
| 27 kN | 15.3 kN | 20000 rpm | 13000 rpm | 0.285 kg285 g |
| FAG6207-ZDeep groove ball bearing |
| 27.5 kN | 15.3 kN | 10400 rpm | 13800 rpm | 0.279 kg279 g |
| TIMKEN6207-ZDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| SKF6207-Z/C3Deep groove ball bearing with seals or shields |
| 27 kN | 15.3 kN | 20000 rpm | 13000 rpm | 0.285 kg285 g |
| SKF6207-Z/C3VT264Deep groove ball bearing with seals or shields |
| 27 kN | 15.3 kN | 20000 rpm | 13000 rpm | 0.288 kg288 g |
| SKF6207 ZJEMDeep groove ball bearing |
| 27 kN | 15.3 kN | 20000 rpm | 13000 rpm | 0.282 kg282 g |
| SKF6207-ZNRDeep groove ball bearing with snap ring and integral sealing |
| 27 kN | 15.3 kN | 20000 rpm | 13000 rpm | 0.295 kg295 g |
| SKF6207 ZNRJEMDeep groove ball bearing |
| 27 kN | 15.3 kN | 20000 rpm | 13000 rpm | 0.288 kg288 g |
| FAG6207-Z-C3Deep groove ball bearing |
| 27.5 kN | 15.3 kN | 10400 rpm | 13800 rpm | 0.279 kg279 g |
| FAG6207-Z-NDeep groove ball bearing |
| 27.5 kN | 15.3 kN | 10400 rpm | 13800 rpm | 0.3003 kg300.3 g |
| FAG6207-Z-N-C3Deep groove ball bearing |
| 27.5 kN | 15.3 kN | 10400 rpm | 13800 rpm | 0.29744 kg297.44 g |
| FAG6207-Z-NRDeep groove ball bearing |
| 27.5 kN | 15.3 kN | 10400 rpm | 13800 rpm | 0.315 kg315 g |
| TIMKEN6207-Z-C3Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN6207-Z-NRDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN6207-Z-NR-C3Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN6207-ZZDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN6207-ZZ-C3Deep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| TIMKEN6207-ZZ-NRDeep groove ball bearing |
| 25.7 kN | 15.3 kN | — | — | 0.29 kg290 g |
| NSK6207ZZDeep groove ball bearing |
| 28.2 kN | 15.3 kN | — | — | — |
| KOYO6207 ZZDeep groove ball bearing |
| 32.1 kN | 15.4 kN | — | 9200 rpmLimiting Speeds(Grease Lub.): 9200 min-1 | 0.288 kg288 g |
| NACHI6207ZEDeep groove ball bearing |
| 32.5 kN | 15.3 kN | — | — | — |
| NACHI6207ZZEDeep groove ball bearing |
| 32.5 kN | 15.3 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6207-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6207-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6207-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| SKF 6207-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6207-Z/C3VT264 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6207 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6207-ZNR | Shield on one side | P6 and tighter width tolerance | CN | Not recorded | Bearing steel | None |
| SKF 6207 ZNRJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6207-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6207-Z-N | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6207-Z-N-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6207-Z-NR | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6207-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6207-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6207-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6207-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6207-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6207-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6207ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6207 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6207ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6207ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6207-Z
Deep groove ball bearing with seals or shields
View full technical record →FAG6207-Z
Deep groove ball bearing
View full technical record →TIMKEN6207-Z
Deep groove ball bearing
View full technical record →SKF6207-Z/C3
Deep groove ball bearing with seals or shields
View full technical record →FAG6207-Z-C3
Deep groove ball bearing
View full technical record →TIMKEN6207-Z-C3
Deep groove ball bearing
View full technical record →SKF6207-Z/C3VT264
Deep groove ball bearing with seals or shields
View full technical record →NACHI6207ZE
Deep groove ball bearing
View full technical record →SKF6207 ZJEM
Deep groove ball bearing
View full technical record →FAG6207-Z-N
Deep groove ball bearing
View full technical record →FAG6207-Z-N-C3
Deep groove ball bearing
View full technical record →SKF6207-ZNR
Deep groove ball bearing with snap ring and integral sealing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.