6206Z bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6206Z. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6206Z — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6206Z | 30 mm | 62 mm | 16 mm | Printed p. 42Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6206Z dimensions and recorded technical data
The recorded 6206Z base designation measures 30×62×16 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 18 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6206Z
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6206-Z — 13 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 62 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 16 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 40.36 mm |
| Recess diameter | D 2 | ≈ 54.06 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 35.6 mm |
| Diameter of shaft abutment | d a | max. 40.3 mm |
| Diameter of housing abutment | D a | max. 56.4 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
TIMKEN 6206-Z — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6206-ZDeep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.196 kg196 g |
| TIMKEN6206-ZDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| SKF6206-Z/C3Deep groove ball bearing with seals or shields |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.196 kg196 g |
| SKF6206-Z/HC5Hybrid ceramic deep groove ball bearing with shields |
| 19.5 kN | 11.2 kN | 28000 rpm | 18000 rpm | 0.183 kg183 g |
| SKF6206-Z/HC5C3Hybrid ceramic deep groove ball bearing with shields |
| 19.5 kN | 11.2 kN | 28000 rpm | 18000 rpm | 0.175 kg175 g |
| SKF6206 ZJEMDeep groove ball bearing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.196 kg196 g |
| SKF6206-ZNRDeep groove ball bearing with snap ring and integral sealing |
| 20.3 kN | 11.2 kN | 24000 rpm | 15000 rpm | 0.201 kg201 g |
| SKF6206-ZTN9/HC5C3Hybrid ceramic deep groove ball bearing with shields |
| 19.5 kN | 11.2 kN | 28000 rpm | 18000 rpm | 0.187 kg187 g |
| TIMKEN6206-Z-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-Z-NRDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-Z-NR-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-ZZDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-ZZ-C3Deep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| TIMKEN6206-ZZ-NRDeep groove ball bearing |
| 19.5 kN | 11.3 kN | — | — | 0.2 kg200 g |
| NSK6206ZZDeep groove ball bearing |
| 21.4 kN | 11.3 kN | — | — | — |
| KOYO6206 ZZDeep groove ball bearing |
| 24.3 kN | 11.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1 | 0.199 kg199 g |
| NACHI6206ZEDeep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | — |
| NACHI6206ZZEDeep groove ball bearing |
| 24.5 kN | 11.3 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6206-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6206-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| SKF 6206-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6206-Z/HC5 | Shield on one side | Not recorded | CN | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6206-Z/HC5C3 | Shield on one side | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6206 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6206-ZNR | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6206-ZTN9/HC5C3 | Shield on one side | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| TIMKEN 6206-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6206-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6206ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6206 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6206ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6206-Z
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6206-Z
Deep groove ball bearing
View full technical record →SKF6206-Z/C3
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6206-Z-C3
Deep groove ball bearing
View full technical record →NACHI6206ZE
Deep groove ball bearing
View full technical record →SKF6206-Z/HC5
Hybrid ceramic deep groove ball bearing with shields
View full technical record →SKF6206-Z/HC5C3
Hybrid ceramic deep groove ball bearing with shields
View full technical record →SKF6206 ZJEM
Deep groove ball bearing
View full technical record →SKF6206-ZNR
Deep groove ball bearing with snap ring and integral sealing
View full technical record →TIMKEN6206-Z-NR
Deep groove ball bearing
View full technical record →TIMKEN6206-Z-NR-C3
Deep groove ball bearing
View full technical record →SKF6206-ZTN9/HC5C3
Hybrid ceramic deep groove ball bearing with shields
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.