6205RS bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6205RS. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6205RS dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 5 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6205RS
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
TIMKEN 6205-RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 25 mm |
| O.D. (D) | D | 52 mm / 2.047 in |
| Width (B) | B | 15 mm / 0.591 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
Catalogue parameters for 6205RS
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
TIMKEN 6205-RS — 7 recorded parameters
Deep groove ball bearing
Reference: Timken public engineering catalogue; source snapshot 2026-09-02.
For the recorded TIMKEN 6205-RS, the manufacturer construction field explicitly says Single Sealed. It is therefore a one-sided sealed record, not evidence for a two-sided 2RS closure. Preserve the brand and complete 6205-RS marking when comparing it.
The source construction string also calls the series Imperial and gives rounded inch dimensions, while its separate overall-width field is zero. That incomplete geometry is not used as a machining specification here; the zero field is withheld. Confirm the current exact drawing before making a dimensional substitution.
The radial load ratings below belong to this recorded product and are not a universal permissible working load. The source does not establish a seal material, waterproof class or application fitment.
Manufacturer Identity
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Brand | Not separately recorded | Timken |
| Material Number | Not separately recorded | 000000000100269926 |
| World Assembly Part Number | Not separately recorded | 6205-RS |
Product Identity
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Type Description | Not separately recorded | Radial Deep-Groove Ball |
| Construction | Not separately recorded | Single Row Deep Groove Ball Bearing | Imperial Series | 0.9843 in Bore | 2.0472 in OD | 0.5906 in Width | Single Sealed | Cylindrical Bore | Steel Cage | C0 Clearance | ISO P0 Tolerance |
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Dynamic Rating C1 | Not separately recorded | 14,000 N |
| Static Radial Rating C0 | Not separately recorded | 7,880 N |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| TIMKEN6205-RSDeep groove ball bearing |
| 14 kN | 7.88 kN | — | — | 0.13 kg130 g |
| SKF6205-RSHDeep groove ball bearing with seals |
| 14.8 kN | 7.8 kN | — | 8500 rpm | 0.125 kg125 g |
| SKF6205-RSH/C3Deep groove ball bearings |
| — | — | — | — | 0.125 kg125 g |
| SKF6205 RSJEMDeep groove ball bearing |
| 14.8 kN | 7.8 kN | — | 8500 rpm | 0.125 kg125 g |
| TIMKEN6205-RS-C3Deep groove ball bearing |
| 14 kN | 7.88 kN | — | — | 0.13 kg130 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| TIMKEN 6205-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| SKF 6205-RSH | Seal on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 6205-RSH/C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6205 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| TIMKEN 6205-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6205-RS
Deep groove ball bearing
View full technical record →KOYO6205RS1C3
Automotive bearing
View full technical record →SKF6205-RS2/C3S0
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6205-RS-C3
Deep groove ball bearing
View full technical record →SKF6205-RSH
Deep groove ball bearing with seals
View full technical record →SKF6205-RSH/C3
Deep groove ball bearings
View full technical record →SKF6205 RSJEM
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.