Find · understand · compare

6205 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 6205. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page7 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

Source-labelled catalogue reference

6205 — PEER catalogue dimensions

Independent technical reference from PEER’s historical 2009 sheets; checked 2026-10-03. These are catalogue records, not current-stock claims or replacement approvals. Printed units are kept separate.

PEER nominal envelope — d is bore, D is outside diameter, B is width
Full catalogue model	d×D×B (mm)	d×D×B (in)	Closed width / execution scope
PEER · 6200 series6205	25×52×15 mmPrinted metric row	.9843×2.0472×.5906 in	Base designation only; complete closure execution must be checked

Read ratings without transferring them to another execution

Cr and Cor are catalogue basic load ratings, not allowable application loads. Oil/grease values below are explicitly for open bearings where supplied. They are not sealed-bearing or machine operating-speed approvals. A dash means withheld or not established here.

Published PEER ratings — N and r/min
Model	Dynamic Cr / static Cor	Open: oil / grease	Evidence boundary
6205	14000 / 7850 N	15000 / 13000 r/min	Base-row catalogue values only; no cross-brand transfer.

Printed decimal conversions inherit catalogue rounding; more decimal places do not create manufacturing accuracy. Special bores must not be rounded to a nearby metric bearing. The historical table does not establish an exact RS/2RS, NR, ABEC, C3, ceramic, vehicle or kit execution unless explicitly listed. No CAD or interchange approval is implied.

PEER reference and special-bore explanation Other source-labelled variants Replacement checks

NSK historical dimension lookup

6205 — source-labelled NSK dimensions

Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.

Single-row radial ball bearing dimensions — all values in millimetres
Complete NSK designation	Bore d	Outside D	Width B	Source page / boundary
NSK catalogue record6205	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205DDU	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205DDUNR	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205DU	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205NR	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205VV	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205Z	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205ZNR	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205ZZ	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked
NSK catalogue record6205ZZNR	25 mm	52 mm	15 mm	Printed p. 38Nominal envelope only; complete execution as marked

Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.

Search all NSK historical dimension rows Understand seal and shield choices Check a replacement candidate

Exact model evidence

6205 dimensions and recorded technical data

The recorded 6205 base designation measures 25×52×15 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 171 recorded variants are listed. A dash means the value is missing, not zero.

Measurement details

Read the original dimensions for 6205

Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.

Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.

SKF 6205 NR — 21 dimension fields

Deep groove ball bearing with snap ring. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	25 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.008 to 0 mm
Outside diameter	D	52 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.011 to 0 mm
Width	B	15 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 34.35 mm
Recess diameter	D 2	≈ 46.21 mm
Diameter of snap ring groove	D 3	49.73 mm
Outside diameter of snap ring	D 4	57.9 mm
Width of snap ring groove	b	1.35 mm
Distance from outer ring side face to snap ring groove	C	2.46 mm
Width of snap ring	f	1.12 mm
Bottom radius of snap ring groove	r 0	max. 0.4 mm
Chamfer dimension	r 1,2	min. 1 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 30.6 mm
Diameter of housing abutment	D a	max. 46.4 mm
Diameter of snap ring recess in the housing	D b	min. 59 mm
Width of snap ring recess in the housing	b a	min. 1.5 mm
Distance from outer ring side face to snap ring back face	C a	max. 3.58 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Open the complete SKF 6205 NR record →

SKF 6205-2Z/C3 — 3 dimension fields

Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	25.0 mm
Outside diameter	Not supplied separately	52.0 mm
Width	Not supplied separately	15.0 mm

Open the complete SKF 6205-2Z/C3 record →

SKF 6205/C3 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	25.0 mm
Outside diameter	Not supplied separately	52.0 mm
Width	Not supplied separately	15.0 mm

Open the complete SKF 6205/C3 record →

SKF 6205/C4 — 3 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	Not supplied separately	25.0 mm
Outside diameter	Not supplied separately	52.0 mm
Width	Not supplied separately	15.0 mm

Open the complete SKF 6205/C4 record →

SKF 6205 — 12 dimension fields

Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	25 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.008 to 0 mm
Outside diameter	D	52 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.011 to 0 mm
Width	B	15 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 34.35 mm
Recess diameter	D 2	≈ 46.21 mm
Chamfer dimension	r 1,2	min. 1 mm

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 30.6 mm
Diameter of housing abutment	D a	max. 46.4 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Open the complete SKF 6205 record →

KOYO 6205 — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	25 mm
Outside diameter	D	52 mm
Width	B	15 mm

Open the complete KOYO 6205 record →

KOYO 6205 2RS — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	25 mm
Outside diameter	D	52 mm
Width	B	15 mm

Open the complete KOYO 6205 2RS record →

KOYO 6205NR — 3 dimension fields

Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.

Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore diameter	d	25 mm
Outside diameter	D	52 mm
Width	B	15 mm

Open the complete KOYO 6205NR record →

TIMKEN 6205-2RS — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	25 mm
O.D. (D)	D	52 mm / 2.047 in
Width (B)	B	15 mm / 0.591 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6205-2RS record →

TIMKEN 6205-2RS-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	25 mm
O.D. (D)	D	52 mm / 2.047 in
Width (B)	B	15 mm / 0.591 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6205-2RS-C3 record →

TIMKEN 6205 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	25 mm
O.D. (D)	D	52 mm / 2.047 in
Width (B)	B	15 mm / 0.591 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6205 record →

TIMKEN 6205-C3 — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	25 mm
O.D. (D)	D	52 mm / 2.047 in
Width (B)	B	15 mm / 0.591 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6205-C3 record →

TIMKEN 6205-NR — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	25 mm
O.D. (D)	D	52 mm / 2.047 in
Width (B)	B	15 mm / 0.591 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6205-NR record →

TIMKEN 6205-2RZ — 4 dimension fields

Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.

Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.

This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.

Bearing and component measurements

Measurement	Source symbol	Recorded value
Bore (d)	d	25 mm
O.D. (D)	D	52 mm / 2.047 in
Width (B)	B	15 mm / 0.591 in

Mounting limits and abutments

Measurement	Source symbol	Recorded value
Max Shaft Fillet Radius	Not supplied separately	1 mm / 0.039 in

Open the complete TIMKEN 6205-2RZ record →

Check shaft and hole fit →Search measured dimensions →

Exact designation reference

Catalogue parameters for 6205

Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.

Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.

SKF 6205 KOYO 6205 NTN 6205LU NSK 6205 NACHI 6205 KOYO 6205 2RS KOYO 6205 ZZ

SKF 6205 — 49 recorded parameters

Deep groove ball bearing

Reference: SKF product catalogue; source snapshot 2026-09-02.

SKF 6205 dimensional tolerances: the nominal bearing size is not the finished shaft or housing size. The following limits are calculated from this exact product record by adding the signed deviation to the nominal bearing dimension.

Bore mid-range size: nominal 25 mm; recorded deviation -0.008 to 0 mm; calculated interval 24.992–25.000 mm. Source symbol: t Δdmp.

Outside-diameter mid-range size: nominal 52 mm; recorded deviation -0.011 to 0 mm; calculated interval 51.989–52.000 mm. Source symbol: t ΔDmp.

Ring width: nominal 15 mm; recorded deviation -0.06 to 0 mm; calculated interval 14.940–15.000 mm. Source symbol: t ΔBs.

The source lists dimensional class "P6 and tighter width tolerance" and geometrical class "P5" separately. Do not collapse those two statements into one ABEC label or transfer them to another brand or suffix.

For cylindrical bores, the mid-range diameter is formed from the largest and smallest two-point sizes in a cross-section. Its allowable deviation is not a limit on every individual two-point measurement. Form variation and run-out are separate checks (SKF Rolling bearings, Table 13, printed pages 49–50).

A shaft/housing fit must be chosen separately for load direction, ring rotation, temperature and installation conditions. These bearing dimensions alone do not approve H7, k6, an interference fit, or an operating clearance.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	Not separately recorded	25.0 mm
Outside diameter	Not separately recorded	52.0 mm
Width	Not separately recorded	15.0 mm

Performance

Parameter	Source symbol	Recorded value
Basic dynamic load rating	Not separately recorded	14.8 kN
Basic static load rating	Not separately recorded	7.8 kN
Reference speed	Not separately recorded	28000.0 r/min
Limiting speed	Not separately recorded	18000.0 r/min
SKF performance class	Not separately recorded	SKF Explorer

Properties

Parameter	Source symbol	Recorded value
Filling slots	Not separately recorded	Without
Number of rows	Not separately recorded	1
Locating feature, bearing outer ring	Not separately recorded	Without
Bore type	Not separately recorded	Cylindrical
Cage	Not separately recorded	Sheet metal
Matched arrangement	Not separately recorded	No
Radial internal clearance	Not separately recorded	CN
Material, bearing	Not separately recorded	Bearing steel
Coating	Not separately recorded	Without
Sealing	Not separately recorded	Without
Relubrication feature	Not separately recorded	Without
Indicative carbon footprint for new product	Not separately recorded	0.46 kg CO 2 e

Logistics

Parameter	Source symbol	Recorded value
Product net weight	Not separately recorded	0.125 kg

Engineering — Dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	25 mm
Deviation limits of mid-range bore diameter	t Δdmp	-0.008 to 0 mm
Outside diameter	D	52 mm
Deviation limits of mid-range outside diameter	t ΔDmp	-0.011 to 0 mm
Width	B	15 mm
Deviation limits of ring width	t ΔBs	-0.06 to 0 mm
Shoulder diameter	d 1	≈ 34.35 mm
Recess diameter	D 2	≈ 46.21 mm
Chamfer dimension	r 1,2	min. 1 mm
ISO tolerance class for dimensions	Not separately recorded	P6 and tighter width tolerance

Engineering — Abutment dimensions

Parameter	Source symbol	Recorded value
Diameter of shaft abutment	d a	min. 30.6 mm
Diameter of housing abutment	D a	max. 46.4 mm
Radius of shaft or housing fillet	r a	max. 1 mm

Engineering — Calculation data

Parameter	Source symbol	Recorded value
SKF performance class	Not separately recorded	SKF Explorer
Basic dynamic load rating	C	14.8 kN
Basic static load rating	C 0	7.8 kN
Fatigue load limit	P u	0.335 kN
Reference speed	Not separately recorded	28000 r/min
Limiting speed	Not separately recorded	18000 r/min
Minimum load factor	k r	0.03
Calculation factor	f 0	14

Engineering — Tolerances of run-out

Parameter	Source symbol	Recorded value
Range of section height at inner ring of assembled bearing	t Kia	4 µm
Maximum run-out of inner ring side face to the bore	t Sd	8 µm
Maximum axial run-out of inner ring of assembled bearing	t Sia	8 µm
Range of section height at outer ring of assembled bearing	t Kea	8 µm
Perpendicularity of outer ring outside surface	t SD	4 µm
Maximum axial run-out of outer ring of assembled bearing	t Sea	10 µm
ISO tolerance class for geometrical tolerances	Not separately recorded	P5

Open SKF 6205 product record →

KOYO 6205 — 14 recorded parameters

Deep groove ball bearing

Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.

The plain KOYO 6205 record is open. For a sealed candidate, inspect the separate KOYO 6205 2RS record; for a shielded candidate, inspect KOYO 6205 ZZ. Both are listed in this page’s exact-designation references with their own parameters. The base number alone does not specify a closure.

These are distinct catalogue constructions, not a suggestion to add a loose seal to an open bearing. Seal replacement or removal requires the original assembly information; no loose-seal part number or equipment fitment is established by these records.

Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.

Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	25 mm
D	Not separately recorded	52 mm
B	Not separately recorded	15 mm
R(Min.)	Not separately recorded	1 mm
Basic Load Ratings : Cr	Not separately recorded	17.5 kN
Basic Load Ratings : C0R	Not separately recorded	7.85 kN
Fatigue Load Limit : Cu	Not separately recorded	0.550 kN
Factor : F0	Not separately recorded	13.9
Limiting Speeds(Grease Lub.)	Not separately recorded	13000 min-1
Limiting Speeds(Oil Lub.)	Not separately recorded	15000 min-1
Da(Min.)	Not separately recorded	30 mm
Da(Max.)	Not separately recorded	47 mm
Ra(Max.)	Not separately recorded	1 mm
Mass(Refer.)	Not separately recorded	0.128 kg

Open KOYO 6205 product record →

NTN 6205LU — 20 recorded parameters

Single row deep groove ball bearings

Reference: NTN Europe public product catalogue; source snapshot 2026-10-02.

For this exact NTN 6205LU record, the nominal envelope is 25×52×15 mm (d = internal diameter; D = external diameter; B = bearing/inner ring width). These are bearing or washer dimensions, not shaft/housing fit limits.

Calculated inch equivalent: 0.984252×2.047244×0.590551 in, in the same axis order. The conversion uses exactly 25.4 mm per inch and rounds to six decimals; it is not an inch-series designation or a machining tolerance.

Recorded closure for 6205LU: contact seal on one side. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.

Use grease- and oil-qualified speed entries only for the named lubrication condition. Dynamic C and static C0 are catalogue ratings, not a universal safe load or installation approval; shoulder and fillet limits are separate from boundary size.

Dimensions and properties

Parameter	Source symbol	Recorded value
Internal diameter	d	25 mm
External diameter	D	52 mm
Bearing/Inner ring width	B	15 mm
Min fillet radius	rs	1 mm
Radial clearance class	Not separately recorded	CN
Mass	Not separately recorded	0.128 kg

Performance

Parameter	Source symbol	Recorded value
Dynamic load	C	15.5 kN
Static load	C0	7.85 kN
Fatigue limit load	Cu	0.55 kN
Coefficient	f0	13.9
Grease lubrication limit speed	N lim	8900 r/min
Min operating temperature	Tmin	-25 °C
Max operating temperature	Tmax	110 °C

Mounting dimensions

Parameter	Source symbol	Recorded value
Min shoulder diameter IR	da min	30 mm
Max shoulder diameter IR	da max	32 mm
Max shoulder diameter OR	Da max	47 mm
Max shaft & housing fillet radius	ra max	1 mm

Product characteristics

Parameter	Source symbol	Recorded value
Catalogue construction	Not separately recorded	Deep groove ball bearing, radial contact, pressed steel cage, contact seal on one side
Cage construction	Not separately recorded	pressed steel cage
Closure construction	Not separately recorded	contact seal on one side

Open NTN 6205LU product record →

NSK 6205 — 15 recorded parameters

Single row deep groove ball bearings

Reference: NSK Rolling Bearings catalogue E1103c, Part C; source snapshot 2026-10-02.

For this exact NSK 6205 record, the nominal envelope is 25×52×15 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.

Recorded closure for 6205: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.

Boundary dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	25 mm
Outside diameter	D	52 mm
Bearing width	B	15 mm
Minimum bearing chamfer	r min.	1 mm

Load ratings

Parameter	Source symbol	Recorded value
Basic dynamic radial load rating	Cr	15400 N
Basic static radial load rating	C0r	7850 N
Equivalent-load calculation factor	f0	13.9

Mounting dimensions

Parameter	Source symbol	Recorded value
Minimum shaft shoulder diameter	da min.	30 mm
Maximum shaft shoulder diameter	da max.	32 mm
Maximum housing shoulder diameter	Da max.	47 mm
Maximum shaft or housing fillet radius	ra max.	1 mm

Lubrication-qualified speed

Parameter	Source symbol	Recorded value
Limiting speed with grease	Not separately recorded	15000 r/min
Limiting speed with oil (open bearing)	Not separately recorded	18000 r/min

Reference mass

Parameter	Source symbol	Recorded value
Approximate catalogue mass (open reference)	Not separately recorded	0.129 kg

Construction

Parameter	Source symbol	Recorded value
Catalogue closure construction	Not separately recorded	Open

Open NSK 6205 product record →

NACHI 6205 — 15 recorded parameters

Deep groove ball bearing

Reference: NACHI Deep Groove Ball Bearings catalogue B3402E-2; source snapshot 2026-10-02.

For this exact NACHI 6205 record, the nominal envelope is 25×52×15 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.

Recorded closure for 6205: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.

Boundary dimensions

Parameter	Source symbol	Recorded value
Bore diameter	d	25 mm
Outside diameter	D	52 mm
Bearing width	B	15 mm
Minimum bearing chamfer	r min.	1 mm

Load ratings

Parameter	Source symbol	Recorded value
Basic dynamic radial load rating	Cr	17700 N
Basic static radial load rating	C0r	7900 N

Equivalent-load factors

Parameter	Source symbol	Recorded value
Catalogue load calculation factor	f0	13.9

Mounting dimensions

Parameter	Source symbol	Recorded value
Minimum shaft shoulder diameter	da min.	31 mm
Maximum housing shoulder diameter	Da max.	46 mm
Maximum adjacent fillet radius	ra max.	1 mm

Construction

Parameter	Source symbol	Recorded value
Closure arrangement	Not separately recorded	Open
Listed closure suffix	Not separately recorded	None (open type)

Reference mass

Parameter	Source symbol	Recorded value
Catalogue row mass (variants not individually specified)	Not separately recorded	0.128 kg

Lubrication-qualified speed

Parameter	Source symbol	Recorded value
Limiting speed with grease (open)	Not separately recorded	13000 r/min
Limiting speed with oil (open)	Not separately recorded	16000 r/min

Open NACHI 6205 product record →

KOYO 6205 2RS — 16 recorded parameters

Deep groove ball bearing

Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.

Looking for a 6205 sealed bearing? KOYO 6205 2RS is a recorded catalogue candidate with contact seals on both sides. Its recorded nominal size is 25×52×15 mm, in the order bore d × outside diameter D × width B.

In JTEKT / KOYO Table 6-2, 2RS identifies contact seals on both sides. The corresponding one-sided code is RS. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6205 base record into a sealed or shielded version.

Select the full marking, not the base number alone. Compare the grease-qualified speed, clearance, material and mounting dimensions of the candidate record before using it. A closure designation does not supply a waterproof rating, chemical-resistance certificate or approved replacement relationship.

The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.

Classification

Parameter	Source symbol	Recorded value
Official Category Path	Not separately recorded	Deep groove ball bearings - Single-row - Shielded/sealed type - Contact sealed
Official Classification 1	Not separately recorded	Deep groove ball bearings / Single-row / Shielded/sealed type / Contact sealed

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	25 mm
D	Not separately recorded	52 mm
B	Not separately recorded	15 mm
R(Min.)	Not separately recorded	1 mm
Basic Load Ratings : Cr	Not separately recorded	17.5 kN
Basic Load Ratings : C0R	Not separately recorded	7.85 kN
Fatigue Load Limit : Cu	Not separately recorded	0.550 kN
Factor : F0	Not separately recorded	13.9
Limiting Speeds(Grease Lub.)	Not separately recorded	8400 min-1
Da(Min.)	Not separately recorded	30 mm
Da(Max.)	Not separately recorded	31.5 mm
Da(Max.)	Not separately recorded	47 mm
Ra(Max.)	Not separately recorded	1 mm
Mass(Refer.)	Not separately recorded	0.128 kg

Open KOYO 6205 2RS product record →

KOYO 6205 ZZ — 16 recorded parameters

Deep groove ball bearing

Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.

Looking for a 6205 shielded bearing? KOYO 6205 ZZ is a recorded catalogue candidate with fixed shields on both sides. Its recorded nominal size is 25×52×15 mm, in the order bore d × outside diameter D × width B.

In JTEKT / KOYO Table 6-2, ZZ identifies fixed shields on both sides. The corresponding one-sided code is Z. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6205 base record into a sealed or shielded version.

The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.

Classification

Parameter	Source symbol	Recorded value
Official Category Path	Not separately recorded	Deep groove ball bearings - Single-row - Shielded/sealed type - Shielded ZZ
Official Classification 1	Not separately recorded	Deep groove ball bearings / Single-row / Shielded/sealed type / Shielded ZZ

Technical Data

Parameter	Source symbol	Recorded value
d	Not separately recorded	25 mm
D	Not separately recorded	52 mm
B	Not separately recorded	15 mm
R(Min.)	Not separately recorded	1 mm
Basic Load Ratings : Cr	Not separately recorded	17.5 kN
Basic Load Ratings : C0R	Not separately recorded	7.85 kN
Fatigue Load Limit : Cu	Not separately recorded	0.550 kN
Factor : F0	Not separately recorded	13.9
Limiting Speeds(Grease Lub.)	Not separately recorded	13000 min-1
Da(Min.)	Not separately recorded	30 mm
Da(Max.)	Not separately recorded	31.5 mm
Da(Max.)	Not separately recorded	47 mm
Ra(Max.)	Not separately recorded	1 mm
Mass(Refer.)	Not separately recorded	0.128 kg

Open KOYO 6205 ZZ product record →

Clearance tables →Precision classes →Load calculations →Interchange checks →

Brand / full designation	Named dimensions (mm / in)	Dynamic C (kN)	Static C0 (kN)	Reference speed (rpm)	Limiting speed (rpm)	Mass (kg / g)
SKF6205Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.125 kg125 g
TIMKEN6205Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
NSK6205Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	15.4 kN	7.85 kN	—	—	0.129 kg129 g
KOYO6205Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	17.5 kN	7.85 kN	—	13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 15000 min-1	0.128 kg128 g
NACHI6205Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	17.7 kN	7.9 kN	—	—	0.128 kg128 g
SKF6205-2RS2/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.13 kg130 g
SKF6205-2RSF/C3GJN8SKF Deep groove ball bearing for highly contaminated environments	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	3700 rpm	0.136 kg136 g
SKF6205-2RSF/C3GJN8/AGSKF Deep groove ball bearing for highly contaminated environments	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	3700 rpm	0.136 kg136 g
SKF6205-2RSF/C4GJN7SKF Deep groove ball bearing for highly contaminated environments	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	3700 rpm	0.136 kg136 g
SKF6205-2RSF/C4GJN7/AGSKF Deep groove ball bearing for highly contaminated environments	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	3700 rpm	0.136 kg136 g
SKF6205-2RSF/GJN7SKF Deep groove ball bearing for highly contaminated environments	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	3700 rpm	0.136 kg136 g
SKF6205-2RSF/GJN8SKF Deep groove ball bearing for highly contaminated environments	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	3700 rpm	0.136 kg136 g
SKF6205-2RSF/GJN8/AGSKF Deep groove ball bearing for highly contaminated environments	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	3700 rpm	0.136 kg136 g
SKF6205-2RSHDeep groove ball bearing with seals	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.129 kg129 g
SKF6205-2RSH/C3Deep groove ball bearing with seals	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	8500 rpm	0.129 kg129 g
SKF6205-2RSH/C3GJNDeep groove ball bearing with seals	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	8500 rpm	0.129 kg129 g
SKF6205-2RSH/C3LHT23Deep groove ball bearing with seals	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.129 kg129 g
SKF6205-2RSH/C3WTDeep groove ball bearing with seals	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.129 kg129 g
SKF6205-2RSH/C4Deep groove ball bearing with seals	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	—	0.13 kg130 g
SKF6205-2RSH/GJNDeep groove ball bearing with seals	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.129 kg129 g
SKF6205-2RSH/HC5C3GJNHybrid ceramic deep groove ball bearing with seals on both sides	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	13.3 kN	7.65 kN	—	15000 rpm	0.114 kg114 g
SKF6205-2RSHKDeep groove ball bearing with tapered bore and seals on both sides	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.126 kg126 g
SKF6205-2RSHNRDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.132 kg132 g
SKF6205-2RSH/VA947SKF Food line deep groove ball bearing with seals	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.129 kg129 g
SKF6205-2RSH/W64Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	6100 rpm	0.13 kg130 g
SKF6205 2RSJEMDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.13 kg130 g
SKF6205-2RSLDeep groove ball bearing with seals	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.129 kg129 g
SKF6205-2RSL/C3GJNDeep groove ball bearing with seals	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.129 kg129 g
SKF6205-2RSLTN9/C3VT162Deep groove ball bearing	Recorded bore (d) — Recorded outside dimension (D) — Catalogue width (symbol unverified) —	—	—	—	—	0.124 kg124 g
SKF6205-2RSLTN9/HC5C3WTHybrid ceramic deep groove ball bearing with low-friction seals on both sides	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14 kN	7.8 kN	32000 rpm	15000 rpm	0.113 kg113 g
SKF6205 2RSNRJEMDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.129 kg129 g
SKF6205-2ZDeep groove ball bearing with seals or shields	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.131 kg131 g
SKF6205-2Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.131 kg131 g
SKF6205-2Z/C3GJNDeep groove ball bearing with seals or shields	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.131 kg131 g
SKF6205-2Z/C3LHT23Deep groove ball bearing with seals or shields	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.131 kg131 g
SKF6205-2Z/C3WTDeep groove ball bearing with seals or shields	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.131 kg131 g
SKF6205-2Z/C4Deep groove ball bearing with seals or shields	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.131 kg131 g
SKF6205 2ZJEMDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.131 kg131 g
SKF6205-2ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.13 kg130 g
SKF6205 2ZNRJEMDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	14000 rpm	0.133 kg133 g
SKF6205-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	—	7.8 kN	—	120 rpm	0.126 kg126 g
SKF6205-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	—	7.8 kN	—	110 rpm	0.125 kg125 g
SKF6205-2Z/VA228Deep groove ball bearing for high temperature applications with shields on both sides	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	—	7.8 kN	—	230 rpm	0.126 kg126 g
SKF6205/AXDDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	17.8 kN	7.8 kN	28000 rpm	18000 rpm	0.129 kg129 g
SKF6205/C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.125 kg125 g
SKF6205/C4Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.121 kg121 g
SKF6205 ETN9Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	17.8 kN	9.3 kN	28000 rpm	18000 rpm	0.114 kg114 g
SKF6205 ETN9/C4Deep groove ball bearing	Recorded bore (d) — Recorded outside dimension (D) — Catalogue width (symbol unverified) —	—	—	—	—	0.114 kg114 g
SKF6205/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14 kN	7.8 kN	32000 rpm	22000 rpm	0.114 kg114 g
SKF6205 JEMDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.125 kg125 g
SKF6205 MA/C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.143 kg143 g
SKF6205 NDeep groove ball bearing with snap ring groove	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.124 kg124 g
SKF6205 NRDeep groove ball bearing with snap ring	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.128 kg128 g
SKF6205 NRJEMDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.13 kg130 g
SKF6205-RS2/C3S0Deep groove ball bearing with seals or shields	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.127 kg127 g
SKF6205-RSHDeep groove ball bearing with seals	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.125 kg125 g
SKF6205-RSH/C3Deep groove ball bearings	Recorded bore (d) — Recorded outside dimension (D) — Catalogue width (symbol unverified) —	—	—	—	—	0.125 kg125 g
SKF6205 RSJEMDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	—	8500 rpm	0.125 kg125 g
SKF6205 TN9/C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.12 kg120 g
SKF6205 TN9/C4Deep groove ball bearing	Recorded bore (d) — Recorded outside dimension (D) — Catalogue width (symbol unverified) —	—	—	—	—	0.12 kg120 g
SKF6205 TN9/HC5C3Hybrid ceramic deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14 kN	7.8 kN	32000 rpm	22000 rpm	0.107 kg107 g
SKF6205/VA201Deep groove ball bearing for high temperature applications	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	—	7.8 kN	—	120 rpm	0.124 kg124 g
SKF6205-ZDeep groove ball bearing with seals or shields	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.127 kg127 g
SKF6205-Z/C3Deep groove ball bearing with seals or shields	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.127 kg127 g
SKF6205 ZJEMDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.127 kg127 g
SKF6205-ZNRDeep groove ball bearing with snap ring and integral sealing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.8 kN	7.8 kN	28000 rpm	18000 rpm	0.131 kg131 g
FAG6205-C-2BRS-L038-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.126 kg126 g
FAG6205-C-2BRS-TVH-L138-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.12 kg120 g
FAG6205-C-2BRS-TVH-L178-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.12 kg120 g
FAG6205-C-2BRS>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.127 kg127 g
FAG6205-C-2HRS-C2>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.126 kg126 g
FAG6205-C-2HRS-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2HRS-C4>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2HRS-L038-C2>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.13 kg130 g
FAG6205-C-2HRS-L038-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2HRS-L038-C4>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.13 kg130 g
FAG6205-C-2HRS-L038>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.13 kg130 g
FAG6205-C-2HRS-L069-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2HRS-L069>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2HRS-L091-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2HRS-L100-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.126 kg126 g
FAG6205-C-2HRS-L138-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.127 kg127 g
FAG6205-C-2HRS-L138>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.127 kg127 g
FAG6205-C-2HRS-L140-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.124 kg124 g
FAG6205-C-2HRS-L207-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2HRS-L408-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2HRS-N-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.13 kg130 g
FAG6205-C-2HRS-NR-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.128 kg128 g
FAG6205-C-2HRS>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.125 kg125 g
FAG6205-C-2Z-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-C4>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-CM>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.127 kg127 g
FAG6205-C-2Z-L038-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-L038>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.124 kg124 g
FAG6205-C-2Z-L055-CM>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-L069-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-L069>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-L100-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-L138-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-L138-CM>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-L138>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.127 kg127 g
FAG6205-C-2Z-L207-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-L207>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.129 kg129 g
FAG6205-C-2Z-L408-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.127 kg127 g
FAG6205-C-2Z-L506-CM>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-2Z-TVH-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.121 kg121 g
FAG6205-C-2Z>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	18400 rpm	0.125 kg125 g
FAG6205-C-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.118 kg118 g
FAG6205-C-C4>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.118 kg118 g
FAG6205-C-H305-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.128 kg128 g
FAG6205-C-H305>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.129 kg129 g
FAG6205-C-HRS-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.121 kg121 g
FAG6205-C-HRS-C4>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.12 kg120 g
FAG6205-C-HRS>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	—	12200 rpm	0.121 kg121 g
FAG6205-C-NR-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.121 kg121 g
FAG6205-C-NR>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.121 kg121 g
FAG6205-C-TVH-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.112 kg112 g
FAG6205-C-TVH-C4>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.112 kg112 g
FAG6205-C-TVH>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.112 kg112 g
FAG6205-C>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.119 kg119 g
FAG6205-C-W61B-H305>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.124 kg124 g
FAG6205-C-Z-C3>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.126 kg126 g
FAG6205-C-Z>VDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	15.9 kN	7.8 kN	16000 rpm	21600 rpm	0.126 kg126 g
FAG6205-H-2RSR-C3>NDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.02 kN	7.88 kN	—	7900 rpm	0.13 kg130 g
FAG6205-H-2RSR>NDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.02 kN	7.88 kN	—	7900 rpm	0.133 kg133 g
FAG6205-H-2Z-C3>NDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.02 kN	7.88 kN	14100 rpm	16500 rpm	0.127 kg127 g
FAG6205-H-2Z>NDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.02 kN	7.88 kN	14100 rpm	16500 rpm	0.133 kg133 g
FAG6205-H>NDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	14.02 kN	7.88 kN	14100 rpm	19400 rpm	0.133 kg133 g
TIMKEN6205-2RSDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RS-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RS-C3/VSL609Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RS-C4Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RS-L671Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RS-NRDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RS-NR-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RS/VSL609Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RZDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RZ-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RZ-NRDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-2RZ-NR-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-NRDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-NR-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-RSDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-RS-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205/VSL609Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-ZDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-Z-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-Z-NRDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-Z-NR-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-ZZDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-ZZ-C3Deep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
TIMKEN6205-ZZ-NRDeep groove ball bearing	Recorded bore (d) 25 mm 0.984252 in Recorded outside dimension (D) 52 mm 2.047244 in Catalogue width (symbol unverified) 15 mm 0.590551 in	14 kN	7.88 kN	—	—	0.13 kg130 g
NSK6205DDUDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	15.4 kN	7.85 kN	—	—	—
NSK6205VVDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	15.4 kN	7.85 kN	—	—	—
NSK6205ZZDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	15.4 kN	7.85 kN	—	—	—
KOYO6205 2RDDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	17.5 kN	7.85 kN	—	12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1	0.128 kg128 g
KOYO6205 2RSDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	17.5 kN	7.85 kN	—	8400 rpmLimiting Speeds(Grease Lub.): 8400 min-1	0.128 kg128 g
KOYO6205 2RUDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	17.5 kN	7.85 kN	—	13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1	0.128 kg128 g
KOYO6205NRDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	17.5 kN	7.85 kN	—	13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 15000 min-1	0.128 kg128 g
KOYO6205RDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	22.1 kN	9.3 kN	—	13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 16000 min-1	0.138 kg138 g
KOYO6205RS1C3Automotive bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	—	—	—	—	0.132 kg132 g
KOYO6205 ZZDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Width (B) 15 mm 0.590551 in	17.5 kN	7.85 kN	—	13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1	0.128 kg128 g
NACHI6205-2NKE9Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	17.7 kN	7.9 kN	—	—	—
NACHI6205-2NSE9Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	17.7 kN	7.9 kN	—	—	—
NACHI6205NKE9Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	17.7 kN	7.9 kN	—	—	—
NACHI6205NSE9Deep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	17.7 kN	7.9 kN	—	—	—
NACHI6205ZEDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	17.7 kN	7.9 kN	—	—	—
NACHI6205ZZEDeep groove ball bearing	Bore diameter (d) 25 mm 0.984252 in Outside diameter (D) 52 mm 2.047244 in Bearing width (B) 15 mm 0.590551 in	17.7 kN	7.9 kN	—	—	—
NTN6205LUDeep groove ball bearing	Internal diameter (d) 25 mm 0.984252 in External diameter (D) 52 mm 2.047244 in Bearing/Inner ring width (B) 15 mm 0.590551 in	15.5 kN	7.85 kN	—	—	0.128 kg128 g
NTN6205ZDeep groove ball bearing	Internal diameter (d) 25 mm 0.984252 in External diameter (D) 52 mm 2.047244 in Bearing/Inner ring width (B) 15 mm 0.590551 in	15.5 kN	7.85 kN	—	—	0.128 kg128 g

Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designation	Closure	Original precision	Clearance	Cage	Material	Lubricant
SKF 6205	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
TIMKEN 6205	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6205	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6205	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6205	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6205-2RS2/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSF/C3GJN8	Seal on both sides	P6 and tighter width tolerance	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSF/C3GJN8/AG	Seal on both sides	P6 and tighter width tolerance	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSF/C4GJN7	Seal on both sides	P6 and tighter width tolerance	C4	Sheet metal	Bearing steel	Grease
SKF 6205-2RSF/C4GJN7/AG	Seal on both sides	P6 and tighter width tolerance	C4	Sheet metal	Bearing steel	Grease
SKF 6205-2RSF/GJN7	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2RSF/GJN8	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2RSF/GJN8/AG	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH/C3	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH/C3LHT23	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH/C3WT	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH/C4	Seal on both sides	Not recorded	c4	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH/GJN	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH/HC5C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	Grease
SKF 6205-2RSHK	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2RSHNR	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2RSH/VA947	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Food grade grease
SKF 6205-2RSH/W64	Seal on both sides	Not recorded	CN	Sheet metal	Bearing steel	Solid Oil
SKF 6205 2RSJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSL	Seal on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2RSL/C3GJN	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2RSLTN9/C3VT162	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6205-2RSLTN9/HC5C3WT	Seal on both sides	Not recorded	C3	Non-metallic	Hybrid (ceramic balls)	Grease
SKF 6205 2RSNRJEM	Seal on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2Z	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6205-2Z/C3	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2Z/C3GJN	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2Z/C3LHT23	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2Z/C3WT	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2Z/C4	Shield on both sides	Not recorded	C4	Sheet metal	Bearing steel	Grease
SKF 6205 2ZJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2ZNR	Shield on both sides	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	Grease
SKF 6205 2ZNRJEM	Shield on both sides	Not recorded	C3	Sheet metal	Bearing steel	Grease
SKF 6205-2Z/VA201	Shield on both sides	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6205-2Z/VA208	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6205-2Z/VA228	Shield on both sides	Not recorded	Multiples of C5	Non-metallic	High temperature steel	Solid lubricant
SKF 6205/AXD	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6205/C3	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6205/C4	Without	Not recorded	C4	Sheet metal	Bearing steel	None
SKF 6205 ETN9	Without	Normal	CN	Non-metallic	Bearing steel	None
SKF 6205 ETN9/C4	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6205/HC5C3	Without	Not recorded	C3	Sheet metal	Hybrid (ceramic balls)	None
SKF 6205 JEM	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6205 MA/C3	Without	Not recorded	C3	Machined brass	Bearing steel	None
SKF 6205 N	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6205 NR	Without	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
SKF 6205 NRJEM	Without	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6205-RS2/C3S0	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6205-RSH	Seal on one side	Not recorded	CN	Sheet metal	Bearing steel	None
SKF 6205-RSH/C3	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6205 RSJEM	Seal on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6205 TN9/C3	Without	Not recorded	C3	Non-metallic	Bearing steel	None
SKF 6205 TN9/C4	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
SKF 6205 TN9/HC5C3	Without	Not recorded	C3	Non-metallic	Hybrid (ceramic balls)	None
SKF 6205/VA201	Without	Not recorded	Multiples of C5	Sheet metal	High temperature steel	Solid lubricant
SKF 6205-Z	Shield on one side	Not recorded	CN	Sheet metal	Bearing steel	None
SKF 6205-Z/C3	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6205 ZJEM	Shield on one side	Not recorded	C3	Sheet metal	Bearing steel	None
SKF 6205-ZNR	Shield on one side	P6 and tighter width tolerance	CN	Sheet metal	Bearing steel	None
FAG 6205-C-2BRS-L038-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6205-C-2BRS-TVH-L138-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	L138 — Grease (L138/customer specific)
FAG 6205-C-2BRS-TVH-L178-C3>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	L178 — Grease (L178/customer specific)
FAG 6205-C-2BRS>V	2BRS — Non-contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2HRS-C2>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C2 (Group 2) — Internal clearance smaller than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2HRS-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2HRS-C4>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2HRS-L038-C2>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C2 (Group 2) — Internal clearance smaller than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6205-C-2HRS-L038-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6205-C-2HRS-L038-C4>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6205-C-2HRS-L038>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6205-C-2HRS-L069-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6205-C-2HRS-L069>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6205-C-2HRS-L091-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L091 — Grease (L091/customer specific)
FAG 6205-C-2HRS-L100-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6205-C-2HRS-L138-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6205-C-2HRS-L138>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6205-C-2HRS-L140-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L140 — Grease (L140/customer specific)
FAG 6205-C-2HRS-L207-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6205-C-2HRS-L408-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L408 — Grease (L408/customer specific)
FAG 6205-C-2HRS-N-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2HRS-NR-C3>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2HRS>V	2HRS — Contact seal on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2Z-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2Z-C4>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2Z-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2Z-L038-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6205-C-2Z-L038>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L038 — Grease (L038/customer specific)
FAG 6205-C-2Z-L055-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L055 — Grease (L055/customer specific)
FAG 6205-C-2Z-L069-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6205-C-2Z-L069>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L069 — Low noise high-temperature grease, interchangeable with grease L207
FAG 6205-C-2Z-L100-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L100 — Grease (L100/customer specific)
FAG 6205-C-2Z-L138-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6205-C-2Z-L138-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6205-C-2Z-L138>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L138 — Grease (L138/customer specific)
FAG 6205-C-2Z-L207-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6205-C-2Z-L207>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	L207 — Low noise high-temperature grease, interchangeable with grease L069
FAG 6205-C-2Z-L408-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	L408 — Grease (L408/customer specific)
FAG 6205-C-2Z-L506-CM>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CM (Group M) — Internal clearance limited for electric motors	JN — Steel sheet metal	Not recorded	L506 — Grease (L506/customer specific)
FAG 6205-C-2Z-TVH-C3>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-2Z>V	2Z — Non-contact shield on both sides	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	GA14 — Ball bearing grease, low noise
FAG 6205-C-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-C4>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-H305-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-H305>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-HRS-C3>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-HRS-C4>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-HRS>V	HRS — Contact seal on one side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-NR-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-NR>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-TVH-C3>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	Without — Bearing not greased
FAG 6205-C-TVH-C4>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	C4 (Group 4) — Internal clearance larger than C3	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	Without — Bearing not greased
FAG 6205-C-TVH>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	TVH — Solid cage made of glass-fiber reinforced polyamid PA66	Not recorded	Without — Bearing not greased
FAG 6205-C>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-W61B-H305>V	Without — Not sealed	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-Z-C3>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-C-Z>V	Z — Non-contact shield on one Side	P6 — Class 6 (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
FAG 6205-H-2RSR-C3>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6205-H-2RSR>N	2RSR — Contact seal on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6205-H-2Z-C3>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	C3 (Group 3) — Internal clearance larger than CN	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6205-H-2Z>N	2Z — Non-contact shield on both sides	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Lubricating grease
FAG 6205-H>N	Without — Not sealed	PN — Normal (ISO 492:2023)	CN (Group N) — Normal internal clearance	JN — Steel sheet metal	Not recorded	Without — Bearing not greased
TIMKEN 6205-2RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RS-C3/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RS-C4	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RS-L671	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RS-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RS-NR-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RS/VSL609	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RZ	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RZ-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RZ-NR	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-2RZ-NR-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-NR	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-NR-C3	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-RS	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-RS-C3	Sealed	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205/VSL609	Open	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-Z	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-Z-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-Z-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-Z-NR-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-ZZ	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-ZZ-C3	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
TIMKEN 6205-ZZ-NR	Shielded	Not recorded	Not recorded	Steel cage	Not recorded	Not recorded
NSK 6205DDU	Contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6205VV	Non-contact rubber seals on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NSK 6205ZZ	Metal shields on both sides	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6205 2RD	Extremely light contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6205 2RS	Contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6205 2RU	Non-contact sealed	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6205NR	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6205R	Open	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6205RS1C3	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
KOYO 6205 ZZ	Shielded ZZ	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6205-2NKE9	Two non-contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6205-2NSE9	Two contact seals	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6205NKE9	One non-contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6205NSE9	One contact seal	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6205ZE	One shield	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NACHI 6205ZZE	Two shields	Not recorded	Not recorded	Not recorded	Not recorded	Not recorded
NTN 6205LU	contact seal on one side	Not recorded	CN	pressed steel cage	Not recorded	Not recorded
NTN 6205Z	shield on one side	Not recorded	CN	pressed steel cage	Not recorded	Not recorded

How to compare these values

Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.

View full technical record →TIMKEN

6205-2RS-C3

Deep groove ball bearing

View full technical record →

Filter all 172 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Find by measured dimensions

6205 — PEER catalogue dimensions

Read ratings without transferring them to another execution

6205 — source-labelled NSK dimensions

6205 dimensions and recorded technical data

Read the original dimensions for 6205

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Bearing and component measurements

Mounting limits and abutments

Catalogue parameters for 6205

Dimensions

Performance

Properties

Logistics

Engineering — Dimensions

Engineering — Abutment dimensions

Engineering — Calculation data

Engineering — Tolerances of run-out

Technical Data

Dimensions and properties

Performance

Mounting dimensions

Product characteristics

Boundary dimensions

Load ratings

Mounting dimensions

Lubrication-qualified speed

Reference mass

Construction

Boundary dimensions

Load ratings

Equivalent-load factors

Mounting dimensions

Construction

Reference mass

Lubrication-qualified speed

Classification

Technical Data

Classification

Technical Data

How to compare these values

Related prefix matches — other model numbers may appear

6205

6205

6205

6205

6205

6205-2NKE9

6205-2NSE9

6205 2RD

6205-2RS

6205 2RS

6205-2RS2/C3GJN

6205-2RS-C3

Check the drawing before substituting

Reference basis & data limits

Find, filter and compare bearing model data in one place.