6034 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6034. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6034 dimensions and recorded technical data
The recorded 6034 base designation measures 170×260×42 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 21 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| FAG6034Deep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 3400 rpm | 7.1 kg7100 g |
| NSK6034Deep groove ball bearing |
| 177 kN | 161 kN | — | — | 6.89 kg6890 g |
| KOYO6034Deep groove ball bearing |
| 201 kN | 161 kN | — | 2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1Limiting Speeds(Oil Lub.): 2800 min-1 | 6.8 kg6800 g |
| SKF6034 MDeep groove ball bearing |
| 168 kN | 173 kN | 5300 rpm | 4300 rpm | 7.94 kg7940 g |
| SKF6034 M/C3Deep groove ball bearing |
| 168 kN | 173 kN | 5300 rpm | 4300 rpm | 7.94 kg7940 g |
| SKF6034 M/C4Deep groove ball bearing |
| 168 kN | 173 kN | 5300 rpm | 4300 rpm | 7.94 kg7940 g |
| FAG6034-2RSRDeep groove ball bearing |
| 179 kN | 172 kN | — | 1340 rpm | 7.2 kg7200 g |
| FAG6034-C3Deep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 3400 rpm | 7.1 kg7100 g |
| FAG6034-MDeep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 4400 rpm | 8.025 kg8025 g |
| FAG6034-MADeep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 4400 rpm | 8.025 kg8025 g |
| FAG6034-MA-C3Deep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 4400 rpm | 8.025 kg8025 g |
| FAG6034-MA-C4Deep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 4400 rpm | 8.025 kg8025 g |
| FAG6034-M-C3Deep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 4400 rpm | 8.025 kg8025 g |
| FAG6034-M-C4Deep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 4400 rpm | 8.025 kg8025 g |
| FAG6034-M-J20CDeep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 4400 rpm | 8.2 kg8200 g |
| FAG6034-M-J20C-C3Deep groove ball bearing |
| 179 kN | 172 kN | 3550 rpm | 4400 rpm | 8.2 kg8200 g |
| TIMKEN6034MDeep groove ball bearing |
| 168 kN | 172 kN | — | — | 8.32 kg8320 g |
| NSK6034VVDeep groove ball bearing |
| 177 kN | 161 kN | — | — | — |
| NSK6034ZZSDeep groove ball bearing |
| 177 kN | 161 kN | — | — | — |
| KOYO6034 2RUDeep groove ball bearing |
| 201 kN | 161 kN | — | 2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1 | 6.8 kg6800 g |
| KOYO6034 ZZXDeep groove ball bearing |
| 201 kN | 161 kN | — | 2400 rpmLimiting Speeds(Grease Lub.): 2400 min-1 | 6.8 kg6800 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| FAG 6034 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| NSK 6034 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6034 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6034 M | Without | Normal | CN | Machined brass | Bearing steel | None |
| SKF 6034 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6034 M/C4 | Without | Not recorded | C4 | Machined brass | Bearing steel | None |
| FAG 6034-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6034-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6034-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6034-MA | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | MA — Solid brass cage, outer ring guided | Not recorded | Without — Bearing not greased |
| FAG 6034-MA-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | MA — Solid brass cage, outer ring guided | Not recorded | Without — Bearing not greased |
| FAG 6034-MA-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | MA — Solid brass cage, outer ring guided | Not recorded | Without — Bearing not greased |
| FAG 6034-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6034-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6034-M-J20C | Not recorded | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6034-M-J20C-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| TIMKEN 6034M | Open | Not recorded | Not recorded | Brass cage | Not recorded | Not recorded |
| NSK 6034VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6034ZZS | Shielded ZZS catalogue type | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6034 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6034 ZZX | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6034
Deep groove ball bearing
View full technical record →KOYO6034
Deep groove ball bearing
View full technical record →NSK6034
Deep groove ball bearing
View full technical record →FAG6034-2RSR
Deep groove ball bearing
View full technical record →KOYO6034 2RU
Deep groove ball bearing
View full technical record →FAG6034-C3
Deep groove ball bearing
View full technical record →SKF6034 M
Deep groove ball bearing
View full technical record →FAG6034-M
Deep groove ball bearing
View full technical record →TIMKEN6034M
Deep groove ball bearing
View full technical record →FAG6034-MA
Deep groove ball bearing
View full technical record →FAG6034-MA-C3
Deep groove ball bearing
View full technical record →FAG6034-MA-C4
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.