Find · understand · compare
6014 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6014. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6014 dimensions and recorded technical data
The recorded 6014 base designation measures 70×110×20 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 88 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6014
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6014 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.012 to 0 mm |
| Outside diameter | D | 110 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.013 to 0 mm |
| Width | B | 20 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 82.85 mm |
| Recess diameter | D 2 | ≈ 99.9 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 76 mm |
| Diameter of housing abutment | D a | max. 104 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
FAG 6014 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Outside diameter | D | 110 mm |
| Width | B | 20 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 97.28 mm |
| Caliber diameter outer ring | D2 | 100.04 mm |
| Shoulder diameter inner ring | d1 | 82.75 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 76 mm |
| Maximum diameter of housing shoulder | Da max | 104 mm |
| Maximum fillet radius | ra max | 1 mm |
KOYO 6014 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Outside diameter | D | 110 mm |
| Width | B | 20 mm |
KOYO 6014 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Outside diameter | D | 110 mm |
| Width | B | 20 mm |
KOYO 6014 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 70 mm |
| Outside diameter | D | 110 mm |
| Width | B | 20 mm |
TIMKEN 6014-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 70 mm |
| O.D. (D) | D | 110 mm / 4.331 in |
| Width (B) | B | 20 mm / 0.787 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6014 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 70 mm |
| O.D. (D) | D | 110 mm / 4.331 in |
| Width (B) | B | 20 mm / 0.787 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6014-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 70 mm |
| O.D. (D) | D | 110 mm / 4.331 in |
| Width (B) | B | 20 mm / 0.787 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6014Deep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.597 kg597 g |
| FAG6014Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.606 kg606 g |
| TIMKEN6014Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| NSK6014Deep groove ball bearing |
| 42 kN | 31 kN | — | — | 0.608 kg608 g |
| KOYO6014Deep groove ball bearing |
| 47.6 kN | 30.9 kN | — | 6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1Limiting Speeds(Oil Lub.): 7200 min-1 | 0.602 kg602 g |
| SKF6014-2RS1Deep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | — | 3600 rpm | 0.631 kg631 g |
| SKF6014-2RS1/C3Deep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | 13000 rpm | 3600 rpm | 0.617 kg617 g |
| SKF6014-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | — | 3600 rpm | 0.62 kg620 g |
| SKF6014-2RS1/MTVM121Deep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | 13000 rpm | 3600 rpm | 0.631 kg631 g |
| SKF6014 2RSJEMDeep groove ball bearing |
| 39.7 kN | 31 kN | — | 3600 rpm | 0.62 kg620 g |
| SKF6014 2RSNRJEMDeep groove ball bearing |
| 39.7 kN | 31 kN | — | 3600 rpm | 0.639 kg639 g |
| SKF6014-2ZDeep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | 13000 rpm | 6300 rpm | 0.625 kg625 g |
| SKF6014-2Z/C3Deep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | 13000 rpm | 6300 rpm | 0.625 kg625 g |
| SKF6014-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | 13000 rpm | 6300 rpm | 0.629 kg629 g |
| SKF6014 2ZJEMDeep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 6300 rpm | 0.629 kg629 g |
| SKF6014/AXDDeep groove ball bearing |
| 47.5 kN | 31 kN | 13000 rpm | 8000 rpm | 0.597 kg597 g |
| SKF6014/C3Deep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.597 kg597 g |
| SKF6014/C4Deep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.597 kg597 g |
| SKF6014/HC5C3Hybrid ceramic deep groove ball bearing |
| 37.7 kN | 31 kN | 14000 rpm | 9000 rpm | 0.521 kg521 g |
| SKF6014 JEMDeep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.601 kg601 g |
| SKF6014 MDeep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 11000 rpm | 0.683 kg683 g |
| SKF6014 M/C3Deep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 11000 rpm | 0.688 kg688 g |
| SKF6014 M/C3S0Deep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 11000 rpm | 0.683 kg683 g |
| SKF6014 M/HC5C4Hybrid ceramic deep groove ball bearing |
| 37.7 kN | 31 kN | 14000 rpm | 11000 rpm | 0.631 kg631 g |
| SKF6014 NRDeep groove ball bearing with snap ring |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.624 kg624 g |
| SKF6014 NR/C4Deep groove ball bearing with snap ring |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.62 kg620 g |
| SKF6014 NRJEMDeep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.62 kg620 g |
| SKF6014-RS1Deep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | — | 3600 rpm | 0.611 kg611 g |
| SKF6014 RSJEMDeep groove ball bearing |
| 39.7 kN | 31 kN | — | 3600 rpm | 0.607 kg607 g |
| SKF6014-ZDeep groove ball bearing with seals or shields |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.608 kg608 g |
| SKF6014 ZJEMDeep groove ball bearing |
| 39.7 kN | 31 kN | 13000 rpm | 8000 rpm | 0.612 kg612 g |
| FAG6014-2RSRDeep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.615 kg615 g |
| FAG6014-2RSR-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.615 kg615 g |
| FAG6014-2RSR-C4Deep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.615 kg615 g |
| FAG6014-2RSR-L038Deep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.615 kg615 g |
| FAG6014-2RSR-L038-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.615 kg615 g |
| FAG6014-2RSR-L100-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.62 kg620 g |
| FAG6014-2RSR-L207Deep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.62 kg620 g |
| FAG6014-2RSR-L237-C4Deep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.615 kg615 g |
| FAG6014-2ZDeep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 7300 rpm | 0.596 kg596 g |
| FAG6014-2Z-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 7300 rpm | 0.596 kg596 g |
| FAG6014-2Z-L038Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 7300 rpm | 0.596 kg596 g |
| FAG6014-2Z-L038-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 7300 rpm | 0.596 kg596 g |
| FAG6014-2Z-L069-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 7300 rpm | 0.61 kg610 g |
| FAG6014-2Z-L140Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 7300 rpm | 0.63 kg630 g |
| FAG6014-2Z-L140-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 7300 rpm | 0.63 kg630 g |
| FAG6014-2Z-L207Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 7300 rpm | 0.61 kg610 g |
| FAG6014-C2Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.606 kg606 g |
| FAG6014-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.606 kg606 g |
| FAG6014-C4Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.606 kg606 g |
| FAG6014-H-2RSR-SN-C3>NDeep groove ball bearing |
| 36.77 kN | 29.08 kN | — | 3250 rpm | 0.588 kg588 g |
| FAG6014-H-2RSR-SN>NDeep groove ball bearing |
| 36.77 kN | 29.08 kN | — | 3250 rpm | 0.588 kg588 g |
| FAG6014-H-2Z-SN-C3>NDeep groove ball bearing |
| 36.77 kN | 29.08 kN | 6800 rpm | 7300 rpm | 0.58 kg580 g |
| FAG6014-H-2Z-SN>NDeep groove ball bearing |
| 36.77 kN | 29.08 kN | 6800 rpm | 7300 rpm | 0.58 kg580 g |
| FAG6014-H-SN-C3>NDeep groove ball bearing |
| 36.77 kN | 29.08 kN | 6800 rpm | 8600 rpm | 0.596 kg596 g |
| FAG6014-H-SN>NDeep groove ball bearing |
| 36.77 kN | 29.08 kN | 6800 rpm | 8600 rpm | 0.596 kg596 g |
| FAG6014-MDeep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 11200 rpm | 0.709 kg709 g |
| FAG6014-M-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 11200 rpm | 0.709 kg709 g |
| FAG6014-M-C4Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 11200 rpm | 0.709 kg709 g |
| FAG6014-NDeep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.574 kg574 g |
| FAG6014-N-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.574 kg574 g |
| FAG6014-NRDeep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.62 kg620 g |
| FAG6014-RSRDeep groove ball bearing |
| 40.5 kN | 31 kN | — | 3250 rpm | 0.613 kg613 g |
| FAG6014-ZDeep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.595 kg595 g |
| FAG6014-Z-C3Deep groove ball bearing |
| 40.5 kN | 31 kN | 6800 rpm | 8600 rpm | 0.595 kg595 g |
| TIMKEN6014-2RSDeep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-2RS-C3Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-2RS-C3/VSL609Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-2RS/VSL609Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-2RZ-C3Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.57 kg570 g |
| TIMKEN6014-2RZ-NRDeep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-C3Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-NRDeep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.57 kg570 g |
| TIMKEN6014-NR-C3Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.57 kg570 g |
| TIMKEN6014-RSDeep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014/VSL609Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-ZDeep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-Z-C3Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.57 kg570 g |
| TIMKEN6014-Z-NR-C3Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.57 kg570 g |
| TIMKEN6014-ZZDeep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| TIMKEN6014-ZZ-C3Deep groove ball bearing |
| 38 kN | 30.9 kN | — | — | 0.58 kg580 g |
| NSK6014DDUDeep groove ball bearing |
| 42 kN | 31 kN | — | — | — |
| NSK6014VVDeep groove ball bearing |
| 42 kN | 31 kN | — | — | — |
| NSK6014ZZDeep groove ball bearing |
| 42 kN | 31 kN | — | — | — |
| KOYO6014 2RSDeep groove ball bearing |
| 47.6 kN | 30.9 kN | — | 3500 rpmLimiting Speeds(Grease Lub.): 3500 min-1 | 0.602 kg602 g |
| KOYO6014 2RUDeep groove ball bearing |
| 47.6 kN | 30.9 kN | — | 6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1 | 0.602 kg602 g |
| KOYO6014NRDeep groove ball bearing |
| 47.6 kN | 30.9 kN | — | 6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1Limiting Speeds(Oil Lub.): 7200 min-1 | 0.602 kg602 g |
| KOYO6014 ZZDeep groove ball bearing |
| 47.6 kN | 30.9 kN | — | 6100 rpmLimiting Speeds(Grease Lub.): 6100 min-1 | 0.602 kg602 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6014 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6014 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6014 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6014 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6014 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6014-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6014-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6014-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6014-2RS1/MTVM121 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6014 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6014 2RSNRJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6014-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6014-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6014-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6014 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6014/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6014/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6014/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6014/HC5C3 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6014 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6014 M | Without | P6 and tighter width tolerance | CN | Machined brass | Bearing steel | None |
| SKF 6014 M/C3 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6014 M/C3S0 | Without | Not recorded | C3 | Machined brass | Bearing steel | None |
| SKF 6014 M/HC5C4 | Without | Not recorded | C4 | Machined brass | Hybrid (ceramic balls) | None |
| SKF 6014 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6014 NR/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6014 NRJEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6014-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6014 RSJEM | Seal on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6014-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6014 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| FAG 6014-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6014-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6014-2RSR-C4 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6014-2RSR-L038 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6014-2RSR-L038-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6014-2RSR-L100-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6014-2RSR-L207 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6014-2RSR-L237-C4 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L237 — Grease (L237/customer specific) |
| FAG 6014-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6014-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6014-2Z-L038 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6014-2Z-L038-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6014-2Z-L069-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6014-2Z-L140 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6014-2Z-L140-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6014-2Z-L207 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6014-C2 | Without — Not sealed | PN — Normal (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-H-2RSR-SN-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6014-H-2RSR-SN>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6014-H-2Z-SN-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6014-H-2Z-SN>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6014-H-SN-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-H-SN>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6014-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6014-M-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6014-N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-N-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-NR | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-RSR | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6014-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6014-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-2RZ-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-NR-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6014-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6014DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6014VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6014ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6014 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6014 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6014NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6014 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6014
Deep groove ball bearing
View full technical record →FAG6014
Deep groove ball bearing
View full technical record →TIMKEN6014
Deep groove ball bearing
View full technical record →KOYO6014
Deep groove ball bearing
View full technical record →NSK6014
Deep groove ball bearing
View full technical record →TIMKEN6014-2RS
Deep groove ball bearing
View full technical record →KOYO6014 2RS
Deep groove ball bearing
View full technical record →SKF6014-2RS1
Deep groove ball bearing with seals or shields
View full technical record →SKF6014-2RS1/C3
Deep groove ball bearing with seals or shields
View full technical record →SKF6014-2RS1/C3GJN
Deep groove ball bearing with seals or shields
View full technical record →SKF6014-2RS1/MTVM121
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6014-2RS-C3
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.