Find · understand · compare
6013 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6013. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6013 dimensions and recorded technical data
The recorded 6013 base designation measures 65×100×18 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 86 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6013
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6013 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 65 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.012 to 0 mm |
| Outside diameter | D | 100 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.013 to 0 mm |
| Width | B | 18 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 76.3 mm |
| Recess diameter | D 2 | ≈ 91.5 mm |
| Chamfer dimension | r 1,2 | min. 1.1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 71 mm |
| Diameter of housing abutment | D a | max. 94 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
FAG 6013 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 65 mm |
| Outside diameter | D | 100 mm |
| Width | B | 18 mm |
| Minimum chamfer dimension | rmin | 1.1 mm |
| Shoulder diameter outer ring | D1 | 88.8 mm |
| Caliber diameter outer ring | D2 | 91.52 mm |
| Shoulder diameter inner ring | d1 | 76.225 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 71 mm |
| Maximum diameter of housing shoulder | Da max | 94 mm |
| Maximum fillet radius | ra max | 1 mm |
KOYO 6013 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 65 mm |
| Outside diameter | D | 100 mm |
| Width | B | 18 mm |
KOYO 6013 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 65 mm |
| Outside diameter | D | 100 mm |
| Width | B | 18 mm |
KOYO 6013 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 65 mm |
| Outside diameter | D | 100 mm |
| Width | B | 18 mm |
TIMKEN 6013 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 65 mm |
| O.D. (D) | D | 100 mm / 3.937 in |
| Width (B) | B | 18 mm / 0.709 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6013-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 65 mm |
| O.D. (D) | D | 100 mm / 3.937 in |
| Width (B) | B | 18 mm / 0.709 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
TIMKEN 6013-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 65 mm |
| O.D. (D) | D | 100 mm / 3.937 in |
| Width (B) | B | 18 mm / 0.709 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1.1 mm / 0.043 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6013Deep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.427 kg427 g |
| FAG6013Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 9500 rpm | 0.418 kg418 g |
| TIMKEN6013Deep groove ball bearing |
| 30.4 kN | 23 kN | — | — | 0.42 kg420 g |
| NSK6013Deep groove ball bearing |
| 33.5 kN | 25.2 kN | — | — | 0.439 kg439 g |
| KOYO6013Deep groove ball bearing |
| 38.1 kN | 25.2 kN | — | 6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 7800 min-1 | 0.435 kg435 g |
| SKF6013-2RS1Deep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | — | 4000 rpm | 0.441 kg441 g |
| SKF6013-2RS1/C3Deep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | 14000 rpm | 4000 rpm | 0.441 kg441 g |
| SKF6013-2RS1/GJNDeep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | 14000 rpm | 4000 rpm | 0.422 kg422 g |
| SKF6013 2RSJEMDeep groove ball bearing |
| 31.9 kN | 25 kN | — | 4000 rpm | 0.422 kg422 g |
| SKF6013 2RSNRJEMDeep groove ball bearing |
| 31.9 kN | 25 kN | — | 4000 rpm | 0.44 kg440 g |
| SKF6013-2ZDeep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | 14000 rpm | 7000 rpm | 0.449 kg449 g |
| SKF6013-2Z/C3Deep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | 14000 rpm | 7000 rpm | 0.449 kg449 g |
| SKF6013-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | 14000 rpm | 7000 rpm | 0.42 kg420 g |
| SKF6013-2Z/C4VT127Deep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | 14000 rpm | 7000 rpm | 0.457 kg457 g |
| SKF6013 2ZJEMDeep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 7000 rpm | 0.42 kg420 g |
| SKF6013 2ZNRJEMDeep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 7000 rpm | 0.45 kg450 g |
| SKF6013/AXDDeep groove ball bearing |
| 39 kN | 25 kN | 14000 rpm | 9000 rpm | 0.438 kg438 g |
| SKF6013/C3Deep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.427 kg427 g |
| SKF6013/C4Deep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.427 kg427 g |
| SKF6013/DFC125Double row deep groove ball bearing |
| 51.7 kN | 50 kN | 14000 rpm | 9000 rpm | 0.854 kg854 g |
| SKF6013 JEMDeep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.411 kg411 g |
| SKF6013 MDeep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 12000 rpm | 0.501 kg501 g |
| SKF6013 M/HC5C4HS0Hybrid ceramic deep groove ball bearing |
| 30.7 kN | 25 kN | 15000 rpm | 12000 rpm | 0.48 kg480 g |
| SKF6013 NRDeep groove ball bearing with snap ring |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.443 kg443 g |
| SKF6013 NR/C3Deep groove ball bearing with snap ring |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.443 kg443 g |
| SKF6013 NRJEMDeep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.44 kg440 g |
| SKF6013-RS1Deep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | — | 4000 rpm | 0.432 kg432 g |
| SKF6013 RSJEMDeep groove ball bearing |
| 31.9 kN | 25 kN | — | 4000 rpm | 0.44 kg440 g |
| SKF6013-ZDeep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.436 kg436 g |
| SKF6013-Z/C3Deep groove ball bearing with seals or shields |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.436 kg436 g |
| SKF6013 ZJEMDeep groove ball bearing |
| 31.9 kN | 25 kN | 14000 rpm | 9000 rpm | 0.415 kg415 g |
| FAG6013-2RSRDeep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.437 kg437 g |
| FAG6013-2RSR-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.437 kg437 g |
| FAG6013-2RSR-C4Deep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.437 kg437 g |
| FAG6013-2RSR-L038Deep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.447 kg447 g |
| FAG6013-2RSR-L038-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.447 kg447 g |
| FAG6013-2RSR-L140Deep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.442 kg442 g |
| FAG6013-2RSR-L140-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.442 kg442 g |
| FAG6013-2RSR-L140-C4Deep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.442 kg442 g |
| FAG6013-2ZDeep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 8100 rpm | 0.44 kg440 g |
| FAG6013-2Z-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 8100 rpm | 0.44 kg440 g |
| FAG6013-2Z-L038Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 8100 rpm | 0.448 kg448 g |
| FAG6013-2Z-L038-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 8100 rpm | 0.448 kg448 g |
| FAG6013-2Z-L069-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 8100 rpm | 0.47 kg470 g |
| FAG6013-2Z-L140Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 8100 rpm | 0.44 kg440 g |
| FAG6013-C2Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 9500 rpm | 0.418 kg418 g |
| FAG6013-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 9500 rpm | 0.418 kg418 g |
| FAG6013-C4Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 9500 rpm | 0.418 kg418 g |
| FAG6013-H-2RSR-SN-C3>NDeep groove ball bearing |
| 32.04 kN | 24.92 kN | — | 3550 rpm | 0.402 kg402 g |
| FAG6013-H-2RSR-SN>NDeep groove ball bearing |
| 32.04 kN | 24.92 kN | — | 3550 rpm | 0.402 kg402 g |
| FAG6013-H-2Z-SN-C3>NDeep groove ball bearing |
| 32.04 kN | 24.92 kN | 7000 rpm | 7900 rpm | 0.401 kg401 g |
| FAG6013-H-2Z-SN>NDeep groove ball bearing |
| 32.04 kN | 24.92 kN | 7000 rpm | 7900 rpm | 0.401 kg401 g |
| FAG6013-H-SN-C3>NDeep groove ball bearing |
| 32.04 kN | 24.92 kN | 7000 rpm | 9300 rpm | 0.416 kg416 g |
| FAG6013-H-SN>NDeep groove ball bearing |
| 32.04 kN | 24.92 kN | 7000 rpm | 9300 rpm | 0.416 kg416 g |
| FAG6013-MDeep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 12400 rpm | 0.511 kg511 g |
| FAG6013-M-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 12400 rpm | 0.495 kg495 g |
| FAG6013-NDeep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 9500 rpm | 0.423 kg423 g |
| FAG6013-NRDeep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 9500 rpm | 0.427 kg427 g |
| FAG6013-RSRDeep groove ball bearing |
| 32.5 kN | 25 kN | — | 3500 rpm | 0.425 kg425 g |
| FAG6013-ZDeep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 9500 rpm | 0.427 kg427 g |
| FAG6013-Z-C3Deep groove ball bearing |
| 32.5 kN | 25 kN | 7100 rpm | 9500 rpm | 0.427 kg427 g |
| TIMKEN6013-2RSDeep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-2RS-C3Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-2RS-C3/VSL609Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-2RS-NRDeep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-2RS/VSL609Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-2RZDeep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.43 kg430 g |
| TIMKEN6013-2RZ-C3Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.43 kg430 g |
| TIMKEN6013-C3Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-NRDeep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-NR-C3Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-RSDeep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.43 kg430 g |
| TIMKEN6013-RS-C3Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013/VSL609Deep groove ball bearing |
| 30.4 kN | 23 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-ZDeep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-Z-C3Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-Z-NRDeep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.43 kg430 g |
| TIMKEN6013-ZZDeep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| TIMKEN6013-ZZ-C3Deep groove ball bearing |
| 5.17 kN | 24.9 kN | — | — | 0.42 kg420 g |
| NSK6013DDUDeep groove ball bearing |
| 33.5 kN | 25.2 kN | — | — | — |
| NSK6013VVDeep groove ball bearing |
| 33.5 kN | 25.2 kN | — | — | — |
| NSK6013ZZDeep groove ball bearing |
| 33.5 kN | 25.2 kN | — | — | — |
| KOYO6013 2RSDeep groove ball bearing |
| 38.1 kN | 25.2 kN | — | 3700 rpmLimiting Speeds(Grease Lub.): 3700 min-1 | 0.435 kg435 g |
| KOYO6013 2RUDeep groove ball bearing |
| 38.1 kN | 25.2 kN | — | 6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1 | 0.435 kg435 g |
| KOYO6013NRDeep groove ball bearing |
| 38.1 kN | 25.2 kN | — | 6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1Limiting Speeds(Oil Lub.): 7800 min-1 | 0.435 kg435 g |
| KOYO6013 ZZDeep groove ball bearing |
| 38.1 kN | 25.2 kN | — | 6600 rpmLimiting Speeds(Grease Lub.): 6600 min-1 | 0.435 kg435 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6013 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6013 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6013 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6013 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6013 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6013-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6013-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6013-2RS1/GJN | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6013 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6013 2RSNRJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6013-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6013-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6013-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6013-2Z/C4VT127 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6013 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6013 2ZNRJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6013/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6013/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6013/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6013/DFC125 | Without | Not recorded | NSTD | Sheet metal | Bearing steel | None |
| SKF 6013 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6013 M | Without | P6 and tighter width tolerance | CN | Machined brass | Bearing steel | None |
| SKF 6013 M/HC5C4HS0 | Without | Not recorded | C4H | Machined brass | Hybrid (ceramic balls) | None |
| SKF 6013 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6013 NR/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6013 NRJEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6013-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6013 RSJEM | Seal on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6013-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6013-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6013 ZJEM | Shield on one side | Not recorded | C3 | Not recorded | Bearing steel | None |
| FAG 6013-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6013-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6013-2RSR-C4 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6013-2RSR-L038 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6013-2RSR-L038-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6013-2RSR-L140 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6013-2RSR-L140-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6013-2RSR-L140-C4 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6013-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6013-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6013-2Z-L038 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6013-2Z-L038-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6013-2Z-L069-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6013-2Z-L140 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6013-C2 | Without — Not sealed | PN — Normal (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-H-2RSR-SN-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6013-H-2RSR-SN>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6013-H-2Z-SN-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6013-H-2Z-SN>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6013-H-SN-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-H-SN>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-M | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6013-M-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | M — Solid brass cage, rolling element guided | Not recorded | Without — Bearing not greased |
| FAG 6013-N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-NR | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-RSR | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6013-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6013-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-NR-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6013-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6013DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6013VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6013ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6013 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6013 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6013NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6013 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6013
Deep groove ball bearing
View full technical record →FAG6013
Deep groove ball bearing
View full technical record →TIMKEN6013
Deep groove ball bearing
View full technical record →KOYO6013
Deep groove ball bearing
View full technical record →NSK6013
Deep groove ball bearing
View full technical record →TIMKEN6013-2RS
Deep groove ball bearing
View full technical record →KOYO6013 2RS
Deep groove ball bearing
View full technical record →SKF6013-2RS1
Deep groove ball bearing with seals or shields
View full technical record →SKF6013-2RS1/C3
Deep groove ball bearing with seals or shields
View full technical record →SKF6013-2RS1/GJN
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6013-2RS-C3
Deep groove ball bearing
View full technical record →TIMKEN6013-2RS-C3/VSL609
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.