6009 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6009. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6009 dimensions and recorded technical data
The recorded 6009 base designation measures 45×75×16 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, FAG, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 102 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6009
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6009-Z — 13 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 75 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 16 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 54.75 mm |
| Recess diameter | D 2 | ≈ 67.8 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 50.8 mm |
| Diameter of shaft abutment | d a | max. 54.7 mm |
| Diameter of housing abutment | D a | max. 69.2 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
SKF 6009 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 75 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 16 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 54.75 mm |
| Recess diameter | D 2 | ≈ 67.8 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 50.8 mm |
| Diameter of housing abutment | D a | max. 69.2 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
FAG 6009 — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 75 mm |
| Width | B | 16 mm |
| Minimum chamfer dimension | rmin | 1 mm |
| Shoulder diameter outer ring | D1 | 65.6 mm |
| Caliber diameter outer ring | D2 | 67.98 mm |
| Shoulder diameter inner ring | d1 | 54.2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 49.6 mm |
| Maximum diameter of housing shoulder | Da max | 70.4 mm |
| Maximum fillet radius | ra max | 1 mm |
FAG 6009-Z — 10 dimension fields
Deep groove ball bearing. Source: Schaeffler medias — FAG; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 75 mm |
| Width | B | 16 mm |
| Minimum chamfer dimension | rmin | 1 mm |
| Shoulder diameter outer ring | D1 | 65.6 mm |
| Caliber diameter outer ring | D2 | 67.98 mm |
| Shoulder diameter inner ring | d1 | 54.2 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Minimum diameter shaft shoulder | da min | 49.6 mm |
| Maximum diameter of housing shoulder | Da max | 70.4 mm |
| Maximum fillet radius | ra max | 1 mm |
KOYO 6009 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 75 mm |
| Width | B | 16 mm |
KOYO 6009 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 75 mm |
| Width | B | 16 mm |
KOYO 6009 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 45 mm |
| Outside diameter | D | 75 mm |
| Width | B | 16 mm |
TIMKEN 6009-RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 75 mm / 2.953 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6009-Z — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 75 mm / 2.953 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6009-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 75 mm / 2.953 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6009-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 75 mm / 2.953 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6009 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 75 mm / 2.953 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6009-RS-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 45 mm |
| O.D. (D) | D | 75 mm / 2.953 in |
| Width (B) | B | 16 mm / 0.630 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6009Deep groove ball bearing |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.235 kg235 g |
| FAG6009Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 13100 rpm | 0.236 kg236 g |
| TIMKEN6009Deep groove ball bearing |
| 19.9 kN | 14 kN | — | — | 0.24 kg240 g |
| NSK6009Deep groove ball bearing |
| 23 kN | 15.2 kN | — | — | 0.241 kg241 g |
| KOYO6009Deep groove ball bearing |
| 26.2 kN | 15.1 kN | — | 9200 rpmLimiting Speeds(Grease Lub.): 9200 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.245 kg245 g |
| NACHI6009Deep groove ball bearing |
| 26.4 kN | 15.2 kN | — | — | 0.246 kg246 g |
| SKF6009-2RS1Deep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.244 kg244 g |
| SKF6009-2RS1/C3Deep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.244 kg244 g |
| SKF6009-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.244 kg244 g |
| SKF6009-2RS1/C4Deep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.244 kg244 g |
| SKF6009-2RS1/C4GJNDeep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.244 kg244 g |
| SKF6009-2RS1/LT10Deep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.244 kg244 g |
| SKF6009 2RSJEMDeep groove ball bearing |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.243 kg243 g |
| SKF6009-2ZDeep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | 20000 rpm | 10000 rpm | 0.245 kg245 g |
| SKF6009-2Z/C3Deep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | 20000 rpm | 10000 rpm | 0.245 kg245 g |
| SKF6009-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | 20000 rpm | 10000 rpm | 0.245 kg245 g |
| SKF6009-2Z/C3WTDeep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | 20000 rpm | 10000 rpm | 0.245 kg245 g |
| SKF6009-2Z/HC5C5VT376Hybrid ceramic deep groove ball bearing with shields |
| 20.8 kN | 14.6 kN | 22000 rpm | 11000 rpm | 0.245 kg245 g |
| SKF6009 2ZJEMDeep groove ball bearing |
| 22.1 kN | 14.6 kN | 20000 rpm | 10000 rpm | 0.245 kg245 g |
| SKF6009-2ZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with shields |
| 20.8 kN | 14.6 kN | 22000 rpm | 11000 rpm | 0.233 kg233 g |
| SKF6009/AXDDeep groove ball bearing |
| 26.5 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.242 kg242 g |
| SKF6009/C2Deep groove ball bearing |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.235 kg235 g |
| SKF6009/C3Deep groove ball bearing |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.235 kg235 g |
| SKF6009/C4Deep groove ball bearing |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.235 kg235 g |
| SKF6009 JEMDeep groove ball bearing |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.244 kg244 g |
| SKF6009 NRDeep groove ball bearing with snap ring |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.243 kg243 g |
| SKF6009 NRJEMDeep groove ball bearing |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.244 kg244 g |
| SKF6009-RS1Deep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.238 kg238 g |
| SKF6009-RS1/C3Deep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | — | 5600 rpm | 0.225 kg225 g |
| SKF6009-ZDeep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.239 kg239 g |
| SKF6009-Z/C3Deep groove ball bearing with seals or shields |
| 22.1 kN | 14.6 kN | 20000 rpm | 12000 rpm | 0.239 kg239 g |
| FAG6009-2RSRDeep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.24 kg240 g |
| FAG6009-2RSR-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.24 kg240 g |
| FAG6009-2RSR-C4Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.24 kg240 g |
| FAG6009-2RSR-L038Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.25 kg250 g |
| FAG6009-2RSR-L038-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.24 kg240 g |
| FAG6009-2RSR-L140-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.24 kg240 g |
| FAG6009-2RSR-L195Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.24 kg240 g |
| FAG6009-2RSR-L195-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.243 kg243 g |
| FAG6009-2RSR-L207Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.25443 kg254.43 g |
| FAG6009-2RSR-L207-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.24 kg240 g |
| FAG6009-2RSR-NRDeep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.24 kg240 g |
| FAG6009-2RSR-NR-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.25 kg250 g |
| FAG6009-2ZDeep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 11200 rpm | 0.241 kg241 g |
| FAG6009-2Z-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 11200 rpm | 0.241 kg241 g |
| FAG6009-2Z-L038Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 11200 rpm | 0.24 kg240 g |
| FAG6009-2Z-L038-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 11200 rpm | 0.22968 kg229.68 g |
| FAG6009-2Z-L069-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 11200 rpm | 0.24 kg240 g |
| FAG6009-2Z-L138Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 11200 rpm | 0.241 kg241 g |
| FAG6009-2Z-L207Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 11200 rpm | 0.241 kg241 g |
| FAG6009-2Z-L207-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 11200 rpm | 0.241 kg241 g |
| FAG6009-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 13100 rpm | 0.236 kg236 g |
| FAG6009-C4Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 13100 rpm | 0.236 kg236 g |
| FAG6009-CMDeep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 13100 rpm | 0.24 kg240 g |
| FAG6009-H-2RSR-C3>NDeep groove ball bearing |
| 19.89 kN | 13.99 kN | — | 4900 rpm | 0.242 kg242 g |
| FAG6009-H-2RSR>NDeep groove ball bearing |
| 19.89 kN | 13.99 kN | — | 4900 rpm | 0.242 kg242 g |
| FAG6009-H-2Z-C3>NDeep groove ball bearing |
| 19.89 kN | 13.99 kN | 9800 rpm | 11100 rpm | 0.253 kg253 g |
| FAG6009-H-2Z>NDeep groove ball bearing |
| 19.89 kN | 13.99 kN | 9800 rpm | 11100 rpm | 0.253 kg253 g |
| FAG6009-H-C3>NDeep groove ball bearing |
| 19.89 kN | 13.99 kN | 9800 rpm | 13100 rpm | 0.247 kg247 g |
| FAG6009-H>NDeep groove ball bearing |
| 19.89 kN | 13.99 kN | 9800 rpm | 13100 rpm | 0.247 kg247 g |
| FAG6009-NRDeep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 13100 rpm | 0.239 kg239 g |
| FAG6009-RSRDeep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.234 kg234 g |
| FAG6009-RSR-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | — | 4950 rpm | 0.23661 kg236.61 g |
| FAG6009-ZDeep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 13100 rpm | 0.235 kg235 g |
| FAG6009-Z-C3Deep groove ball bearing |
| 21.2 kN | 14.4 kN | 9700 rpm | 13100 rpm | 0.235 kg235 g |
| TIMKEN6009-2RSDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-2RS-C3Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-2RS-C3/VSL609Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-2RS-NRDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-2RS-NR-C3Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.23 kg230 g |
| TIMKEN6009-2RS/VSL609Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-2RZDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.23 kg230 g |
| TIMKEN6009-2RZ-C3Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.23 kg230 g |
| TIMKEN6009-2RZ-NRDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.23 kg230 g |
| TIMKEN6009-C3Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009HDeep groove ball bearing |
| 16.9 kN | 11.2 kN | — | — | 0.24 kg240 g |
| TIMKEN6009H/FVSL525Deep groove ball bearing |
| 16.9 kN | 11.2 kN | — | — | 0.24 kg240 g |
| TIMKEN6009H/FVSL613Deep groove ball bearing |
| 16.9 kN | 11.2 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-NRDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.23 kg230 g |
| TIMKEN6009-RSDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.28 kg280 g |
| TIMKEN6009-RS-C3Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.23 kg230 g |
| TIMKEN6009/VSL609Deep groove ball bearing |
| 19.9 kN | 14 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-ZDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-Z-C3Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.23 kg230 g |
| TIMKEN6009-Z-NRDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.23 kg230 g |
| TIMKEN6009-ZZDeep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-ZZ-C3Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| TIMKEN6009-ZZ-L671Deep groove ball bearing |
| 21 kN | 15.1 kN | — | — | 0.24 kg240 g |
| NSK6009DDUDeep groove ball bearing |
| 23 kN | 15.2 kN | — | — | — |
| NSK6009VVDeep groove ball bearing |
| 23 kN | 15.2 kN | — | — | — |
| NSK6009ZZDeep groove ball bearing |
| 23 kN | 15.2 kN | — | — | — |
| KOYO6009 2RDDeep groove ball bearing |
| 26.2 kN | 15.1 kN | — | 8300 rpmLimiting Speeds(Grease Lub.): 8300 min-1 | 0.245 kg245 g |
| KOYO6009 2RSDeep groove ball bearing |
| 26.2 kN | 15.1 kN | — | 5300 rpmLimiting Speeds(Grease Lub.): 5300 min-1 | 0.245 kg245 g |
| KOYO6009 2RUDeep groove ball bearing |
| 26.2 kN | 15.1 kN | — | 9200 rpmLimiting Speeds(Grease Lub.): 9200 min-1 | 0.245 kg245 g |
| KOYO6009NRDeep groove ball bearing |
| 26.2 kN | 15.1 kN | — | 9200 rpmLimiting Speeds(Grease Lub.): 9200 min-1Limiting Speeds(Oil Lub.): 11000 min-1 | 0.245 kg245 g |
| KOYO6009 ZZDeep groove ball bearing |
| 26.2 kN | 15.1 kN | — | 9200 rpmLimiting Speeds(Grease Lub.): 9200 min-1 | 0.245 kg245 g |
| NACHI6009-2NKE9Deep groove ball bearing |
| 26.4 kN | 15.2 kN | — | — | — |
| NACHI6009-2NSE9Deep groove ball bearing |
| 26.4 kN | 15.2 kN | — | — | — |
| NACHI6009NKE9Deep groove ball bearing |
| 26.4 kN | 15.2 kN | — | — | — |
| NACHI6009NSE9Deep groove ball bearing |
| 26.4 kN | 15.2 kN | — | — | — |
| NACHI6009ZEDeep groove ball bearing |
| 26.4 kN | 15.2 kN | — | — | — |
| NACHI6009ZZEDeep groove ball bearing |
| 26.4 kN | 15.2 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6009 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| FAG 6009 | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6009 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6009 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6009 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6009 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6009-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6009-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6009-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6009-2RS1/C4 | Seal on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6009-2RS1/C4GJN | Seal on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6009-2RS1/LT10 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6009 2RSJEM | Seal on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6009-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6009-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6009-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6009-2Z/C3WT | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6009-2Z/HC5C5VT376 | Shield on both sides | Not recorded | C5 | Sheet metal | Hybrid (ceramic balls) | Grease |
| SKF 6009 2ZJEM | Shield on both sides | Not recorded | C3 | Not recorded | Bearing steel | Grease |
| SKF 6009-2ZTN9/HC5C3WT | Shield on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6009/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6009/C2 | Without | Not recorded | C2 | Sheet metal | Bearing steel | None |
| SKF 6009/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6009/C4 | Without | Not recorded | C4 | Sheet metal | Bearing steel | None |
| SKF 6009 JEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6009 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6009 NRJEM | Without | Not recorded | C3 | Not recorded | Bearing steel | None |
| SKF 6009-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6009-RS1/C3 | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6009-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6009-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6009-2RSR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6009-2RSR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6009-2RSR-C4 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6009-2RSR-L038 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6009-2RSR-L038-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6009-2RSR-L140-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L140 — Grease (L140/customer specific) |
| FAG 6009-2RSR-L195 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L195 — Grease (L195/customer specific) |
| FAG 6009-2RSR-L195-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L195 — Grease (L195/customer specific) |
| FAG 6009-2RSR-L207 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6009-2RSR-L207-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6009-2RSR-NR | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6009-2RSR-NR-C3 | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6009-2Z | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6009-2Z-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA13 — Ball bearing and insert bearing grease |
| FAG 6009-2Z-L038 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6009-2Z-L038-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6009-2Z-L069-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6009-2Z-L138 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6009-2Z-L207 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6009-2Z-L207-C3 | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6009-C3 | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-C4 | Without — Not sealed | PN — Normal (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-CM | Without — Not sealed | PN — Normal (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6009-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6009-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6009-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6009-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-NR | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-RSR | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-RSR-C3 | RSR — Contact seal on one side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-Z | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6009-Z-C3 | Z — Non-contact shield on one Side | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6009-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-2RS-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-2RZ-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009H | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6009H/FVSL525 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6009H/FVSL613 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6009-ZZ-L671 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6009DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6009VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6009ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6009 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6009 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6009 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6009NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6009 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6009-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6009-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6009NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6009NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6009ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6009ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6009
Deep groove ball bearing
View full technical record →FAG6009
Deep groove ball bearing
View full technical record →TIMKEN6009
Deep groove ball bearing
View full technical record →KOYO6009
Deep groove ball bearing
View full technical record →NSK6009
Deep groove ball bearing
View full technical record →NACHI6009
Deep groove ball bearing
View full technical record →NACHI6009-2NKE9
Deep groove ball bearing
View full technical record →NACHI6009-2NSE9
Deep groove ball bearing
View full technical record →KOYO6009 2RD
Deep groove ball bearing
View full technical record →TIMKEN6009-2RS
Deep groove ball bearing
View full technical record →KOYO6009 2RS
Deep groove ball bearing
View full technical record →SKF6009-2RS1
Deep groove ball bearing with seals or shields
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.