6007 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6007. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6007 — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6007 | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007DDU | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007DDUNR | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007DU | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007NR | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007VV | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007Z | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007ZNR | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007ZZ | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
| NSK catalogue record6007ZZNR | 35 mm | 62 mm | 14 mm | Printed p. 45Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6007 dimensions and recorded technical data
The recorded 6007 base designation measures 35×62×14 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 98 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6007
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6007-Z — 13 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 35 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 62 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 14 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 43.75 mm |
| Recess diameter | D 2 | ≈ 55.61 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 39.6 mm |
| Diameter of shaft abutment | d a | max. 43.7 mm |
| Diameter of housing abutment | D a | max. 57.4 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
SKF 6007/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 35.0 mm |
| Outside diameter | Not supplied separately | 62.0 mm |
| Width | Not supplied separately | 14.0 mm |
SKF 6007 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 35 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.01 to 0 mm |
| Outside diameter | D | 62 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 14 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 43.75 mm |
| Recess diameter | D 2 | ≈ 55.61 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 39.6 mm |
| Diameter of housing abutment | D a | max. 57.4 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
KOYO 6007 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 35 mm |
| Outside diameter | D | 62 mm |
| Width | B | 14 mm |
KOYO 6007 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 35 mm |
| Outside diameter | D | 62 mm |
| Width | B | 14 mm |
KOYO 6007 ZZ — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 35 mm |
| Outside diameter | D | 62 mm |
| Width | B | 14 mm |
TIMKEN 6007-RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 35 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 14 mm / 0.551 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6007-Z — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 35 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 14 mm / 0.551 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6007-ZZ — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 35 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 14 mm / 0.551 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6007-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 35 mm |
| O.D. (D) | D | 62 mm |
| Width (B) | B | 14 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm |
TIMKEN 6007-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 35 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 14 mm / 0.551 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6007 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 35 mm |
| O.D. (D) | D | 62 mm / 2.441 in |
| Width (B) | B | 14 mm / 0.551 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6007Deep groove ball bearing |
| 16.8 kN | 10.2 kN | 24000 rpm | 15000 rpm | 0.148 kg148 g |
| TIMKEN6007Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| NSK6007Deep groove ball bearing |
| 17.6 kN | 10.3 kN | — | — | 0.151 kg151 g |
| KOYO6007Deep groove ball bearing |
| 19.9 kN | 10.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 13000 min-1 | 0.155 kg155 g |
| NACHI6007Deep groove ball bearing |
| 20.1 kN | 10.3 kN | — | — | 0.156 kg156 g |
| SKF6007-2RS1Deep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.154 kg154 g |
| SKF6007-2RS1/C3Deep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.154 kg154 g |
| SKF6007-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.154 kg154 g |
| SKF6007-2RS1/GFJDeep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.159 kg159 g |
| SKF6007-2RS1/GJNDeep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | 24000 rpm | 7000 rpm | 0.154 kg154 g |
| SKF6007-2RS1NRDeep groove ball bearing with snap ring and integral sealing |
| 16.8 kN | 10.2 kN | 24000 rpm | 7000 rpm | 0.159 kg159 g |
| SKF6007-2RS1TN9/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 15.9 kN | 10.2 kN | — | 7000 rpm | 0.136 kg136 g |
| SKF6007-2RSFTN9/C3GJNSKF Deep groove ball bearing for highly contaminated environments |
| 16.8 kN | 10.2 kN | — | 3000 rpm | 0.155 kg155 g |
| SKF6007 2RSJEMDeep groove ball bearing |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.154 kg154 g |
| SKF6007 2RSNRJEMDeep groove ball bearing |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.159 kg159 g |
| SKF6007-2RZDeep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | 24000 rpm | 12000 rpm | 0.154 kg154 g |
| SKF6007-2RZ/C3LTDeep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | 24000 rpm | 12000 rpm | 0.154 kg154 g |
| SKF6007-2RZTN9/C3VT162Deep groove ball bearing with seals or shields |
| — | — | 24000 rpm | 12000 rpm | 0.151 kg151 g |
| SKF6007-2RZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 15.9 kN | 10.2 kN | 26000 rpm | 14000 rpm | 0.137 kg137 g |
| SKF6007-2ZDeep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | 24000 rpm | 12000 rpm | 0.155 kg155 g |
| SKF6007-2Z/C3Deep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | 24000 rpm | 12000 rpm | 0.155 kg155 g |
| SKF6007-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | 24000 rpm | 12000 rpm | 0.155 kg155 g |
| SKF6007 2ZJEMDeep groove ball bearing |
| 16.8 kN | 10.2 kN | 24000 rpm | 12000 rpm | 0.155 kg155 g |
| SKF6007-2Z/MT33Deep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | 24000 rpm | 12000 rpm | 0.155 kg155 g |
| SKF6007 2ZNRJEMDeep groove ball bearing |
| 16.8 kN | 10.2 kN | 24000 rpm | 12000 rpm | 0.163 kg163 g |
| SKF6007-2ZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with shields |
| 15.9 kN | 10.2 kN | 26000 rpm | 14000 rpm | 0.147 kg147 g |
| SKF6007/AXDDeep groove ball bearing |
| 20.3 kN | 10.2 kN | 24000 rpm | 15000 rpm | 0.153 kg153 g |
| SKF6007/C3Deep groove ball bearing |
| 16.8 kN | 10.2 kN | 24000 rpm | 15000 rpm | 0.148 kg148 g |
| SKF6007/HC5C3Hybrid ceramic deep groove ball bearing |
| 15.9 kN | 10.2 kN | 26000 rpm | 17000 rpm | 0.15 kg150 g |
| SKF6007 JEMDeep groove ball bearing |
| 16.8 kN | 10.2 kN | 24000 rpm | 15000 rpm | 0.148 kg148 g |
| SKF6007 NDeep groove ball bearing with snap ring groove |
| 16.8 kN | 10.2 kN | 24000 rpm | 15000 rpm | 0.146 kg146 g |
| SKF6007-RS1Deep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.15 kg150 g |
| SKF6007-RS1/C3Deep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.15 kg150 g |
| SKF6007 RSJEMDeep groove ball bearing |
| 16.8 kN | 10.2 kN | — | 7000 rpm | 0.15 kg150 g |
| SKF6007 TN9/HC5C3Hybrid ceramic deep groove ball bearing |
| 15.9 kN | 10.2 kN | 26000 rpm | 17000 rpm | 0.13 kg130 g |
| SKF6007-ZDeep groove ball bearing with seals or shields |
| 16.8 kN | 10.2 kN | 24000 rpm | 15000 rpm | 0.15 kg150 g |
| SKF6007-Z/C3Deep groove ball bearings |
| — | — | — | — | 0.15 kg150 g |
| SKF6007 ZJEMDeep groove ball bearing |
| 16.8 kN | 10.2 kN | 24000 rpm | 15000 rpm | 0.15 kg150 g |
| FAG6007-C-2BRS>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 15000 rpm | 0.148 kg148 g |
| FAG6007-C-2HRS-C3>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | — | 9300 rpm | 0.148 kg148 g |
| FAG6007-C-2HRS-L038-C3>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | — | 9300 rpm | 0.15 kg150 g |
| FAG6007-C-2HRS-L038>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | — | 9300 rpm | 0.15 kg150 g |
| FAG6007-C-2HRS-L069>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | — | 9300 rpm | 0.148 kg148 g |
| FAG6007-C-2HRS>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | — | 9300 rpm | 0.148 kg148 g |
| FAG6007-C-2Z-C3>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 15000 rpm | 0.148 kg148 g |
| FAG6007-C-2Z-L038-C3>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 15000 rpm | 0.148 kg148 g |
| FAG6007-C-2Z-L038>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 15000 rpm | 0.148 kg148 g |
| FAG6007-C-2Z-L069-C3>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 15000 rpm | 0.148 kg148 g |
| FAG6007-C-2Z>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 15000 rpm | 0.148 kg148 g |
| FAG6007-C-C3>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 17700 rpm | 0.14 kg140 g |
| FAG6007-C-CM>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 17700 rpm | 0.14 kg140 g |
| FAG6007-C-HRS-C3>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | — | 9300 rpm | 0.146 kg146 g |
| FAG6007-C-HRS>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | — | 9300 rpm | 0.146 kg146 g |
| FAG6007-C>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 17700 rpm | 0.14 kg140 g |
| FAG6007-C-Z>VDeep groove ball bearing |
| 17.5 kN | 10.3 kN | 12600 rpm | 17700 rpm | 0.144 kg144 g |
| FAG6007-H-2RSR-C3>NDeep groove ball bearing |
| 15.98 kN | 10.28 kN | — | 6200 rpm | 0.148 kg148 g |
| FAG6007-H-2RSR>NDeep groove ball bearing |
| 15.98 kN | 10.28 kN | — | 6200 rpm | 0.148 kg148 g |
| FAG6007-H-2Z-C3>NDeep groove ball bearing |
| 15.98 kN | 10.28 kN | 11600 rpm | 13700 rpm | 0.148 kg148 g |
| FAG6007-H-2Z>NDeep groove ball bearing |
| 15.98 kN | 10.28 kN | 11600 rpm | 13700 rpm | 0.148 kg148 g |
| FAG6007-H-C3>NDeep groove ball bearing |
| 15.98 kN | 10.28 kN | 11600 rpm | 16100 rpm | 0.148 kg148 g |
| FAG6007-H>NDeep groove ball bearing |
| 15.98 kN | 10.28 kN | 11600 rpm | 16100 rpm | 0.148 kg148 g |
| TIMKEN6007-2RSDeep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-2RS-C3Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-2RS-C3/VSL609Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-2RS-NRDeep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-2RS-NR-C3Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-2RS/VSL609Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-2RZDeep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.15 kg150 g |
| TIMKEN6007-2RZ-C3Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.15 kg150 g |
| TIMKEN6007-2RZ-NRDeep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.15 kg150 g |
| TIMKEN6007-2RZ-NR-C3Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.15 kg150 g |
| TIMKEN6007-C3Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007HDeep groove ball bearing |
| 13.6 kN | 8.24 kN | — | — | 0.16 kg160 g |
| TIMKEN6007H/FVSL525Deep groove ball bearing |
| 13.6 kN | 8.24 kN | — | — | 0.16 kg160 g |
| TIMKEN6007H/FVSL613Deep groove ball bearing |
| 13.6 kN | 8.24 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-NRDeep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-RSDeep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-RS-C3Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-ZDeep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-Z-C3Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-ZZDeep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| TIMKEN6007-ZZ-C3Deep groove ball bearing |
| 16 kN | 10.3 kN | — | — | 0.16 kg160 g |
| NSK6007DDUDeep groove ball bearing |
| 17.6 kN | 10.3 kN | — | — | — |
| NSK6007VVDeep groove ball bearing |
| 17.6 kN | 10.3 kN | — | — | — |
| NSK6007ZZDeep groove ball bearing |
| 17.6 kN | 10.3 kN | — | — | — |
| KOYO6007 2RDDeep groove ball bearing |
| 19.9 kN | 10.3 kN | — | 9900 rpmLimiting Speeds(Grease Lub.): 9900 min-1 | 0.155 kg155 g |
| KOYO6007 2RSDeep groove ball bearing |
| 19.9 kN | 10.3 kN | — | 6500 rpmLimiting Speeds(Grease Lub.): 6500 min-1 | 0.155 kg155 g |
| KOYO6007 2RUDeep groove ball bearing |
| 19.9 kN | 10.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1 | 0.155 kg155 g |
| KOYO6007NRDeep groove ball bearing |
| 19.9 kN | 10.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1Limiting Speeds(Oil Lub.): 13000 min-1 | 0.155 kg155 g |
| KOYO6007RKB-9C3Automotive bearing |
| — | — | — | — | 0.138 kg138 g |
| KOYO6007RKBSH4CS28Automotive bearing |
| — | — | — | — | 0.15 kg150 g |
| KOYO6007 ZZDeep groove ball bearing |
| 19.9 kN | 10.3 kN | — | 11000 rpmLimiting Speeds(Grease Lub.): 11000 min-1 | 0.155 kg155 g |
| NACHI6007-2NKE9Deep groove ball bearing |
| 20.1 kN | 10.3 kN | — | — | — |
| NACHI6007-2NSE9Deep groove ball bearing |
| 20.1 kN | 10.3 kN | — | — | — |
| NACHI6007NKE9Deep groove ball bearing |
| 20.1 kN | 10.3 kN | — | — | — |
| NACHI6007NSE9Deep groove ball bearing |
| 20.1 kN | 10.3 kN | — | — | — |
| NACHI6007ZEDeep groove ball bearing |
| 20.1 kN | 10.3 kN | — | — | — |
| NACHI6007ZZEDeep groove ball bearing |
| 20.1 kN | 10.3 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6007 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6007 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6007 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6007 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6007 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6007-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RS1/GFJ | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RS1/GJN | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RS1NR | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RS1TN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6007-2RSFTN9/C3GJN | Seal on both sides | P6 and tighter width tolerance | C3 | Non-metallic | Bearing steel | Grease |
| SKF 6007 2RSJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007 2RSNRJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RZ | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RZ/C3LT | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007-2RZTN9/C3VT162 | Seal on both sides | Not recorded | C3 | Non-metallic | Bearing steel | Grease |
| SKF 6007-2RZTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6007-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6007-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007 2ZJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007-2Z/MT33 | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6007 2ZNRJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6007-2ZTN9/HC5C3WT | Shield on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6007/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6007/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6007/HC5C3 | Without | Not recorded | C3 | Sheet metal | Hybrid (ceramic balls) | None |
| SKF 6007 JEM | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6007 N | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6007-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6007-RS1/C3 | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6007 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6007 TN9/HC5C3 | Without | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | None |
| SKF 6007-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6007-Z/C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6007 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6007-C-2BRS>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6007-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6007-C-2HRS-L038-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6007-C-2HRS-L038>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6007-C-2HRS-L069>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6007-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6007-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6007-C-2Z-L038-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6007-C-2Z-L038>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6007-C-2Z-L069-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6007-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6007-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6007-C-CM>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6007-C-HRS-C3>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6007-C-HRS>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6007-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6007-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6007-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6007-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6007-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6007-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6007-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6007-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6007-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RS-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RZ-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-2RZ-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007H | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6007H/FVSL525 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6007H/FVSL613 | Open | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6007-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6007DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6007VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6007ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6007 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6007 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6007 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6007NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6007RKB-9C3 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6007RKBSH4CS28 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6007 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6007-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6007-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6007NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6007NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6007ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6007ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6007
Deep groove ball bearing
View full technical record →TIMKEN6007
Deep groove ball bearing
View full technical record →KOYO6007
Deep groove ball bearing
View full technical record →NSK6007
Deep groove ball bearing
View full technical record →NACHI6007
Deep groove ball bearing
View full technical record →NACHI6007-2NKE9
Deep groove ball bearing
View full technical record →NACHI6007-2NSE9
Deep groove ball bearing
View full technical record →KOYO6007 2RD
Deep groove ball bearing
View full technical record →TIMKEN6007-2RS
Deep groove ball bearing
View full technical record →KOYO6007 2RS
Deep groove ball bearing
View full technical record →SKF6007-2RS1
Deep groove ball bearing with seals or shields
View full technical record →SKF6007-2RS1/C3
Deep groove ball bearing with seals or shields
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.