Find · understand · compare
6006 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6006. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6006 — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6006 | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006DDU | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006DDUNR | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006DU | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006NR | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006VV | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006Z | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006ZNR | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006ZZ | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
| NSK catalogue record6006ZZNR | 30 mm | 55 mm | 13 mm | Printed p. 41Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6006 dimensions and recorded technical data
The recorded 6006 base designation measures 30×55×13 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 93 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6006
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6006/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 30.0 mm |
| Outside diameter | Not supplied separately | 55.0 mm |
| Width | Not supplied separately | 13.0 mm |
SKF 6006 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 55 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 13 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 38.2 mm |
| Recess diameter | D 2 | ≈ 49 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 34.6 mm |
| Diameter of housing abutment | D a | max. 50.4 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
KOYO 6006 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 55 mm |
| Width | B | 13 mm |
KOYO 6006 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Outside diameter | D | 55 mm |
| Width | B | 13 mm |
TIMKEN 6006 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 55 mm / 2.165 in |
| Width (B) | B | 13 mm / 0.512 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6006-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 55 mm / 2.165 in |
| Width (B) | B | 13 mm / 0.512 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
TIMKEN 6006-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 30 mm |
| O.D. (D) | D | 55 mm / 2.165 in |
| Width (B) | B | 13 mm / 0.512 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 1 mm / 0.039 in |
Catalogue parameters for 6006
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6006 — 45 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 30.0 mm |
| Outside diameter | Not separately recorded | 55.0 mm |
| Width | Not separately recorded | 13.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 13.8 kN |
| Basic static load rating | Not separately recorded | 8.3 kN |
| Reference speed | Not separately recorded | 28000.0 r/min |
| Limiting speed | Not separately recorded | 17000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 0.42 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.113 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 30 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 55 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.011 to 0 mm |
| Width | B | 13 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 38.2 mm |
| Recess diameter | D 2 | ≈ 49 mm |
| Chamfer dimension | r 1,2 | min. 1 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 34.6 mm |
| Diameter of housing abutment | D a | max. 50.4 mm |
| Radius of shaft or housing fillet | r a | max. 1 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 13.8 kN |
| Basic static load rating | C 0 | 8.3 kN |
| Fatigue load limit | P u | 0.355 kN |
| Reference speed | Not separately recorded | 28000 r/min |
| Limiting speed | Not separately recorded | 17000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 15 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 8 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 13 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P6 |
KOYO 6006 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 30 mm |
| D | Not separately recorded | 55 mm |
| B | Not separately recorded | 13 mm |
| R(Min.) | Not separately recorded | 1 mm |
| Basic Load Ratings : Cr | Not separately recorded | 16.5 kN |
| Basic Load Ratings : C0R | Not separately recorded | 8.25 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.530 kN |
| Factor : F0 | Not separately recorded | 14.7 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 13000 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 15000 min-1 |
| Da(Min.) | Not separately recorded | 35 mm |
| Da(Max.) | Not separately recorded | 50 mm |
| Ra(Max.) | Not separately recorded | 1 mm |
| Mass(Refer.) | Not separately recorded | 0.116 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6006Deep groove ball bearing |
| 13.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.113 kg113 g |
| TIMKEN6006Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| NSK6006Deep groove ball bearing |
| 14.6 kN | 8.3 kN | — | — | 0.116 kg116 g |
| KOYO6006Deep groove ball bearing |
| 16.5 kN | 8.25 kN | — | 13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 15000 min-1 | 0.116 kg116 g |
| NACHI6006Deep groove ball bearing |
| 16.7 kN | 8.3 kN | — | — | 0.117 kg117 g |
| SKF6006-2RS1Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.117 kg117 g |
| SKF6006-2RS1/C3Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.117 kg117 g |
| SKF6006-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.117 kg117 g |
| SKF6006-2RS1/C4Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 8000 rpm | 0.117 kg117 g |
| SKF6006-2RS1/GFJDeep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.121 kg121 g |
| SKF6006-2RS1NRDeep groove ball bearing with snap ring and integral sealing |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.119 kg119 g |
| SKF6006-2RS1/W64Deep groove ball bearing |
| 13.8 kN | 8.3 kN | — | 5600 rpm | 0.116 kg116 g |
| SKF6006-2RS2/C4GJNDeep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.117 kg117 g |
| SKF6006-2RSF/GJNSKF Deep groove ball bearing for highly contaminated environments |
| 13.8 kN | 8.3 kN | — | 3500 rpm | 0.122 kg122 g |
| SKF6006 2RSJEMDeep groove ball bearing |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.117 kg117 g |
| SKF6006 2RSNRJEMDeep groove ball bearing |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.119 kg119 g |
| SKF6006-2RZDeep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 14000 rpm | 0.118 kg118 g |
| SKF6006-2RZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with seals on both sides |
| 13.3 kN | 8.3 kN | 30000 rpm | 16000 rpm | 0.113 kg113 g |
| SKF6006-2ZDeep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 14000 rpm | 0.118 kg118 g |
| SKF6006-2Z/C3Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 14000 rpm | 0.116 kg116 g |
| SKF6006-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 14000 rpm | 0.118 kg118 g |
| SKF6006-2Z/C4GJNVT901Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 14000 rpm | 0.118 kg118 g |
| SKF6006 2ZJEMDeep groove ball bearing |
| 13.8 kN | 8.3 kN | 28000 rpm | 14000 rpm | 0.118 kg118 g |
| SKF6006-2ZTN9/HC5C3WTHybrid ceramic deep groove ball bearing with shields |
| 13.3 kN | 8.3 kN | 30000 rpm | 16000 rpm | 0.104 kg104 g |
| SKF6006-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 8.3 kN | — | 100 rpm | 0.118 kg118 g |
| SKF6006/32-2RS1/VB005Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 8000 rpm | 0.106 kg106 g |
| SKF6006/AXDDeep groove ball bearing |
| 16.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.116 kg116 g |
| SKF6006/C3Deep groove ball bearing |
| 13.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.113 kg113 g |
| SKF6006 JEMDeep groove ball bearing |
| 13.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.113 kg113 g |
| SKF6006 NDeep groove ball bearing with snap ring groove |
| 13.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.111 kg111 g |
| SKF6006-RS1Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.114 kg114 g |
| SKF6006-RS1/C3Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.114 kg114 g |
| SKF6006 RSJEMDeep groove ball bearing |
| 13.8 kN | 8.3 kN | — | 8000 rpm | 0.114 kg114 g |
| SKF6006-ZDeep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.115 kg115 g |
| SKF6006-Z/C3Deep groove ball bearing with seals or shields |
| 13.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.115 kg115 g |
| SKF6006 ZJEMDeep groove ball bearing |
| 13.8 kN | 8.3 kN | 28000 rpm | 17000 rpm | 0.115 kg115 g |
| FAG6006-C-2BRS>VDeep groove ball bearing |
| — | — | — | — | 0.113 kg113 g |
| FAG6006-C-2HRS-C3>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | — | 10500 rpm | 0.114 kg114 g |
| FAG6006-C-2HRS-C4>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | — | 10500 rpm | 0.113 kg113 g |
| FAG6006-C-2HRS-L038-C3>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | — | 10500 rpm | 0.114 kg114 g |
| FAG6006-C-2HRS-L038>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | — | 10500 rpm | 0.114 kg114 g |
| FAG6006-C-2HRS>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | — | 10500 rpm | 0.113 kg113 g |
| FAG6006-C-2Z-C3>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 17100 rpm | 0.11 kg110 g |
| FAG6006-C-2Z-L038-C3>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 17100 rpm | 0.11 kg110 g |
| FAG6006-C-2Z-L038>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 17100 rpm | 0.12 kg120 g |
| FAG6006-C-2Z-L069-C3>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 17100 rpm | 0.113 kg113 g |
| FAG6006-C-2Z>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 17100 rpm | 0.113 kg113 g |
| FAG6006-C-C3>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 20100 rpm | 0.107 kg107 g |
| FAG6006-C>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 20100 rpm | 0.108 kg108 g |
| FAG6006-C-Z-C3>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 20100 rpm | 0.11 kg110 g |
| FAG6006-C-Z>VDeep groove ball bearing |
| 14.5 kN | 8.3 kN | 13800 rpm | 20100 rpm | 0.11 kg110 g |
| FAG6006-H-2RSR-C3>NDeep groove ball bearing |
| 13.23 kN | 8.3 kN | — | 7000 rpm | 0.126 kg126 g |
| FAG6006-H-2RSR>NDeep groove ball bearing |
| 13.23 kN | 8.3 kN | — | 7000 rpm | 0.126 kg126 g |
| FAG6006-H-2Z-C3>NDeep groove ball bearing |
| 13.23 kN | 8.3 kN | 12800 rpm | 15500 rpm | 0.126 kg126 g |
| FAG6006-H-2Z>NDeep groove ball bearing |
| 13.23 kN | 8.3 kN | 12800 rpm | 15500 rpm | 0.126 kg126 g |
| FAG6006-H-C3>NDeep groove ball bearing |
| 13.23 kN | 8.3 kN | 12800 rpm | 18300 rpm | 0.122 kg122 g |
| FAG6006-H>NDeep groove ball bearing |
| 13.23 kN | 8.3 kN | 12800 rpm | 18300 rpm | 0.122 kg122 g |
| TIMKEN6006-2RSDeep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-2RS-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-2RS-C3/VSL609Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-2RS-NRDeep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-2RS-NR-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-2RS/VSL609Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-2RZDeep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.11 kg110 g |
| TIMKEN6006-2RZ-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.11 kg110 g |
| TIMKEN6006-2RZ-NR-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.11 kg110 g |
| TIMKEN6006-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-RSDeep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-RS-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-ZDeep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-Z-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-Z-NRDeep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.11 kg110 g |
| TIMKEN6006-Z-NR-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.11 kg110 g |
| TIMKEN6006-ZZDeep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-ZZ-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-ZZ-L671Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| TIMKEN6006-ZZ-NRDeep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.11 kg110 g |
| TIMKEN6006-ZZ-NR-C3Deep groove ball bearing |
| 13.2 kN | 8.28 kN | — | — | 0.12 kg120 g |
| NSK6006DDUDeep groove ball bearing |
| 14.6 kN | 8.3 kN | — | — | — |
| NSK6006VVDeep groove ball bearing |
| 14.6 kN | 8.3 kN | — | — | — |
| NSK6006ZZDeep groove ball bearing |
| 14.6 kN | 8.3 kN | — | — | — |
| KOYO6006 2RDDeep groove ball bearing |
| 16.5 kN | 8.25 kN | — | 12000 rpmLimiting Speeds(Grease Lub.): 12000 min-1 | 0.116 kg116 g |
| KOYO6006 2RSDeep groove ball bearing |
| 16.5 kN | 8.25 kN | — | 7500 rpmLimiting Speeds(Grease Lub.): 7500 min-1 | 0.116 kg116 g |
| KOYO6006 2RUDeep groove ball bearing |
| 16.5 kN | 8.25 kN | — | 13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1 | 0.116 kg116 g |
| KOYO6006NRDeep groove ball bearing |
| 16.5 kN | 8.25 kN | — | 13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1Limiting Speeds(Oil Lub.): 15000 min-1 | 0.116 kg116 g |
| KOYO6006QAutomotive bearing |
| — | — | — | — | 0.135 kg135 g |
| KOYO6006 ZZDeep groove ball bearing |
| 16.5 kN | 8.25 kN | — | 13000 rpmLimiting Speeds(Grease Lub.): 13000 min-1 | 0.116 kg116 g |
| NACHI6006-2NKE9Deep groove ball bearing |
| 16.7 kN | 8.3 kN | — | — | — |
| NACHI6006-2NSE9Deep groove ball bearing |
| 16.7 kN | 8.3 kN | — | — | — |
| NACHI6006NKE9Deep groove ball bearing |
| 16.7 kN | 8.3 kN | — | — | — |
| NACHI6006NSE9Deep groove ball bearing |
| 16.7 kN | 8.3 kN | — | — | — |
| NACHI6006ZEDeep groove ball bearing |
| 16.7 kN | 8.3 kN | — | — | — |
| NACHI6006ZZEDeep groove ball bearing |
| 16.7 kN | 8.3 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6006 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6006 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6006 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6006 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6006 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6006-2RS1 | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RS1/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RS1/C4 | Seal on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RS1/GFJ | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RS1NR | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RS1/W64 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Solid Oil |
| SKF 6006-2RS2/C4GJN | Seal on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RSF/GJN | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6006 2RSJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6006 2RSNRJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RZ | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6006-2RZTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6006-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6006-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6006-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6006-2Z/C4GJNVT901 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6006 2ZJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6006-2ZTN9/HC5C3WT | Shield on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6006-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6006/32-2RS1/VB005 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6006/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6006/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6006 JEM | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6006 N | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6006-RS1 | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6006-RS1/C3 | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6006 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6006-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6006-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6006 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6006-C-2BRS>V | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| FAG 6006-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6006-C-2HRS-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6006-C-2HRS-L038-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6006-C-2HRS-L038>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6006-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6006-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6006-C-2Z-L038-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6006-C-2Z-L038>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6006-C-2Z-L069-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6006-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6006-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6006-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6006-C-Z-C3>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6006-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6006-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6006-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6006-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6006-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6006-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6006-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6006-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-2RS-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-2RZ-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-ZZ-L671 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6006-ZZ-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6006DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6006VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6006ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6006 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6006 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6006 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6006NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6006Q | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6006 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6006-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6006-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6006NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6006NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6006ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6006ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6006
Deep groove ball bearing
View full technical record →TIMKEN6006
Deep groove ball bearing
View full technical record →KOYO6006
Deep groove ball bearing
View full technical record →NSK6006
Deep groove ball bearing
View full technical record →NACHI6006
Deep groove ball bearing
View full technical record →NACHI6006-2NKE9
Deep groove ball bearing
View full technical record →NACHI6006-2NSE9
Deep groove ball bearing
View full technical record →KOYO6006 2RD
Deep groove ball bearing
View full technical record →TIMKEN6006-2RS
Deep groove ball bearing
View full technical record →KOYO6006 2RS
Deep groove ball bearing
View full technical record →SKF6006-2RS1
Deep groove ball bearing with seals or shields
View full technical record →SKF6006-2RS1/C3
Deep groove ball bearing with seals or shields
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.