Find · understand · compare
6005 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6005. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6005 — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6005 | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005DDU | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005DDUNR | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005DU | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005NR | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005VV | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005Z | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005ZNR | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005ZZ | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
| NSK catalogue record6005ZZNR | 25 mm | 47 mm | 12 mm | Printed p. 38Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6005 dimensions and recorded technical data
The recorded 6005 base designation measures 25×47×12 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 104 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6005
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6005/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 25.0 mm |
| Outside diameter | Not supplied separately | 47.0 mm |
| Width | Not supplied separately | 12.0 mm |
SKF 6005 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 25 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 47 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.009 to 0 mm |
| Width | B | 12 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 32 mm |
| Recess diameter | D 2 | ≈ 42.2 mm |
| Chamfer dimension | r 1,2 | min. 0.6 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 28.2 mm |
| Diameter of housing abutment | D a | max. 43.8 mm |
| Radius of shaft or housing fillet | r a | max. 0.6 mm |
KOYO 6005 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 25 mm |
| Outside diameter | D | 47 mm |
| Width | B | 12 mm |
KOYO 6005 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 25 mm |
| Outside diameter | D | 47 mm |
| Width | B | 12 mm |
TIMKEN 6005-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 25 mm |
| O.D. (D) | D | 47 mm / 1.850 in |
| Width (B) | B | 12 mm / 0.472 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
TIMKEN 6005-2RS-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 25 mm |
| O.D. (D) | D | 47 mm / 1.850 in |
| Width (B) | B | 12 mm / 0.472 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
TIMKEN 6005 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 25 mm |
| O.D. (D) | D | 47 mm / 1.850 in |
| Width (B) | B | 12 mm / 0.472 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
Catalogue parameters for 6005
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6005/C3 — 21 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 25.0 mm |
| Outside diameter | Not separately recorded | 47.0 mm |
| Width | Not separately recorded | 12.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 11.9 kN |
| Basic static load rating | Not separately recorded | 6.55 kN |
| Reference speed | Not separately recorded | 32000.0 r/min |
| Limiting speed | Not separately recorded | 20000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | C3 |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 0.27 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.0738 kg |
SKF 6005 — 49 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 25.0 mm |
| Outside diameter | Not separately recorded | 47.0 mm |
| Width | Not separately recorded | 12.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 11.9 kN |
| Basic static load rating | Not separately recorded | 6.55 kN |
| Reference speed | Not separately recorded | 32000.0 r/min |
| Limiting speed | Not separately recorded | 20000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 0.29 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.0776 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 25 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 47 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.009 to 0 mm |
| Width | B | 12 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 32 mm |
| Recess diameter | D 2 | ≈ 42.2 mm |
| Chamfer dimension | r 1,2 | min. 0.6 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 28.2 mm |
| Diameter of housing abutment | D a | max. 43.8 mm |
| Radius of shaft or housing fillet | r a | max. 0.6 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 11.9 kN |
| Basic static load rating | C 0 | 6.55 kN |
| Fatigue load limit | P u | 0.275 kN |
| Reference speed | Not separately recorded | 32000 r/min |
| Limiting speed | Not separately recorded | 20000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 14 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 4 µm |
| Maximum run-out of inner ring side face to the bore | t Sd | 8 µm |
| Maximum axial run-out of inner ring of assembled bearing | t Sia | 8 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 7 µm |
| Perpendicularity of outer ring outside surface | t SD | 4 µm |
| Maximum axial run-out of outer ring of assembled bearing | t Sea | 8 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P5 |
KOYO 6005 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 25 mm |
| D | Not separately recorded | 47 mm |
| B | Not separately recorded | 12 mm |
| R(Min.) | Not separately recorded | 0.6 mm |
| Basic Load Ratings : Cr | Not separately recorded | 12.6 kN |
| Basic Load Ratings : C0R | Not separately recorded | 5.85 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.380 kN |
| Factor : F0 | Not separately recorded | 14.5 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 15000 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 18000 min-1 |
| Da(Min.) | Not separately recorded | 29 mm |
| Da(Max.) | Not separately recorded | 43 mm |
| Ra(Max.) | Not separately recorded | 0.6 mm |
| Mass(Refer.) | Not separately recorded | 0.080 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6005Deep groove ball bearing |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.0776 kg77.6 g |
| TIMKEN6005Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| NSK6005Deep groove ball bearing |
| 11.1 kN | 5.85 kN | — | — | 0.079 kg79 g |
| KOYO6005Deep groove ball bearing |
| 12.6 kN | 5.85 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1Limiting Speeds(Oil Lub.): 18000 min-1 | 0.08 kg80 g |
| NACHI6005Deep groove ball bearing |
| 12.7 kN | 5.85 kN | — | — | 0.079 kg79 g |
| SKF6005-2RSHDeep groove ball bearing with seals |
| 11.9 kN | 6.55 kN | — | 9500 rpm | 0.0797 kg79.7 g |
| SKF6005-2RSH/C3Deep groove ball bearing with seals |
| 11.9 kN | 6.55 kN | 32000 rpm | 9500 rpm | 0.0797 kg79.7 g |
| SKF6005-2RSH/C3GJNDeep groove ball bearing with seals |
| 11.9 kN | 6.55 kN | — | 9500 rpm | 0.0785 kg78.5 g |
| SKF6005-2RSH/C4Deep groove ball bearing |
| — | — | — | — | 0.078 kg78 g |
| SKF6005-2RSHNRDeep groove ball bearing |
| 11.9 kN | 6.55 kN | — | 9500 rpm | 0.081 kg81 g |
| SKF6005-2RSH/VA947SKF Food line deep groove ball bearing with seals |
| 11.9 kN | 6.55 kN | — | 9500 rpm | 0.081 kg81 g |
| SKF6005-2RSH/W64Deep groove ball bearing |
| 11.9 kN | 6.55 kN | — | 6600 rpm | 0.0785 kg78.5 g |
| SKF6005 2RSJEMDeep groove ball bearing |
| 11.9 kN | 6.55 kN | — | 9500 rpm | 0.0785 kg78.5 g |
| SKF6005-2RSLDeep groove ball bearing with seals |
| 11.9 kN | 6.55 kN | 32000 rpm | 16000 rpm | 0.0786 kg78.6 g |
| SKF6005-2RSLTN9/C3VT162Deep groove ball bearing with seals |
| 11.9 kN | 6.55 kN | 32000 rpm | 15000 rpm | 0.072 kg72 g |
| SKF6005-2RSLTN9/HC5C3WTHybrid ceramic deep groove ball bearing with low-friction seals on both sides |
| 11.2 kN | 6.55 kN | 36000 rpm | 16000 rpm | 0.0674 kg67.4 g |
| SKF6005-2ZDeep groove ball bearing with seals or shields |
| 11.9 kN | 6.55 kN | 32000 rpm | 16000 rpm | 0.08 kg80 g |
| SKF6005-2Z/C3Deep groove ball bearing with seals or shields |
| 11.9 kN | 6.55 kN | 32000 rpm | 16000 rpm | 0.08 kg80 g |
| SKF6005-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 11.9 kN | 6.55 kN | 32000 rpm | 16000 rpm | 0.08 kg80 g |
| SKF6005-2Z/C3VT127Deep groove ball bearing with seals or shields |
| 11.9 kN | 6.55 kN | — | — | 0.08 kg80 g |
| SKF6005 2ZJEMDeep groove ball bearing |
| 11.9 kN | 6.55 kN | 32000 rpm | 16000 rpm | 0.08 kg80 g |
| SKF6005-2Z/LHT23Deep groove ball bearing with seals or shields |
| 11.9 kN | 6.55 kN | 32000 rpm | 16000 rpm | 0.08 kg80 g |
| SKF6005-2Z/MT33Deep groove ball bearing with seals or shields |
| 11.9 kN | 6.55 kN | 32000 rpm | 16000 rpm | 0.08 kg80 g |
| SKF6005-2ZNRDeep groove ball bearing with snap ring and integral sealing |
| 11.9 kN | 6.55 kN | 32000 rpm | 16000 rpm | 0.0822 kg82.2 g |
| SKF6005-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 6.55 kN | — | 120 rpm | 0.08 kg80 g |
| SKF6005-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 6.55 kN | — | 120 rpm | 0.077 kg77 g |
| SKF6005/AXDDeep groove ball bearing |
| 14.3 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.078 kg78 g |
| SKF6005/C3Deep groove ball bearing |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.0738 kg73.8 g |
| SKF6005 JEMDeep groove ball bearing |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.076 kg76 g |
| SKF6005 NRDeep groove ball bearing with snap ring |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.0785 kg78.5 g |
| SKF6005-RSHDeep groove ball bearing with seals |
| 11.9 kN | 6.55 kN | — | 20000 rpm | 0.0732 kg73.2 g |
| SKF6005 RSJEMDeep groove ball bearing |
| 11.9 kN | 6.55 kN | — | 9500 rpm | 0.0765 kg76.5 g |
| SKF6005-RSLDeep groove ball bearing with seals |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.0781 kg78.1 g |
| SKF6005 TN9/C3Deep groove ball bearing |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.0723 kg72.3 g |
| SKF6005/VA201Deep groove ball bearing for high temperature applications |
| — | 6.55 kN | — | 120 rpm | 0.0755 kg75.5 g |
| SKF6005-ZDeep groove ball bearing with seals or shields |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.077 kg77 g |
| SKF6005-Z/C3Deep groove ball bearing with seals or shields |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.077 kg77 g |
| SKF6005 ZJEMDeep groove ball bearing |
| 11.9 kN | 6.55 kN | 32000 rpm | 20000 rpm | 0.077 kg77 g |
| FAG6005-C-2BRS>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 20200 rpm | 0.075 kg75 g |
| FAG6005-C-2HRS-C2>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.075 kg75 g |
| FAG6005-C-2HRS-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.075 kg75 g |
| FAG6005-C-2HRS-L038-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.075 kg75 g |
| FAG6005-C-2HRS-L038>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.075 kg75 g |
| FAG6005-C-2HRS-L069>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.076 kg76 g |
| FAG6005-C-2HRS-L138-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.075 kg75 g |
| FAG6005-C-2HRS-L207-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.075 kg75 g |
| FAG6005-C-2HRS>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.076 kg76 g |
| FAG6005-C-2Z-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 20200 rpm | 0.075 kg75 g |
| FAG6005-C-2Z-L038-C2>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 20200 rpm | 0.074 kg74 g |
| FAG6005-C-2Z-L038-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 20200 rpm | 0.074 kg74 g |
| FAG6005-C-2Z-L038>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 20200 rpm | 0.08 kg80 g |
| FAG6005-C-2Z-L207-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 20200 rpm | 0.074 kg74 g |
| FAG6005-C-2Z>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 20200 rpm | 0.074 kg74 g |
| FAG6005-C-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 23700 rpm | 0.07 kg70 g |
| FAG6005-C-C4>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 23700 rpm | 0.07 kg70 g |
| FAG6005-C-HRS-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.072 kg72 g |
| FAG6005-C-HRS>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | — | 12900 rpm | 0.072 kg72 g |
| FAG6005-C>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 23700 rpm | 0.07 kg70 g |
| FAG6005-C-Z-C3>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 23700 rpm | 0.072 kg72 g |
| FAG6005-C-Z>VDeep groove ball bearing |
| 12.6 kN | 6.5 kN | 16400 rpm | 23700 rpm | 0.072 kg72 g |
| FAG6005-H-2RSR-C3>NDeep groove ball bearing |
| 10.07 kN | 5.85 kN | — | 8400 rpm | 0.085 kg85 g |
| FAG6005-H-2RSR>NDeep groove ball bearing |
| 10.07 kN | 5.85 kN | — | 8400 rpm | 0.085 kg85 g |
| FAG6005-H-2Z-C3>NDeep groove ball bearing |
| 10.07 kN | 5.85 kN | 15200 rpm | 18600 rpm | 0.083 kg83 g |
| FAG6005-H-2Z>NDeep groove ball bearing |
| 10.07 kN | 5.85 kN | 15200 rpm | 18600 rpm | 0.083 kg83 g |
| FAG6005-H-C3>NDeep groove ball bearing |
| 10.07 kN | 5.85 kN | 15200 rpm | 21900 rpm | 0.081 kg81 g |
| FAG6005-H>NDeep groove ball bearing |
| 10.07 kN | 5.85 kN | 15200 rpm | 21900 rpm | 0.081 kg81 g |
| TIMKEN6005-2RSDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-2RS-C3Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-2RS-C3/VSL609Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-2RS-NRDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-2RS/VSL609Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-2RZDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-2RZ-C3Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.8 kg800 g |
| TIMKEN6005-2RZ-NRDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.8 kg800 g |
| TIMKEN6005-2RZ-NR-C3Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.8 kg800 g |
| TIMKEN6005-C3Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005H-2RSDeep groove ball bearing |
| 5.89 kN | 4.68 kN | — | — | 0.08 kg80 g |
| TIMKEN6005H-2RS/FVSL531Deep groove ball bearing |
| 5.89 kN | 4.68 kN | — | — | 0.08 kg80 g |
| TIMKEN6005H-2RS/FVSL613Deep groove ball bearing |
| 5.89 kN | 4.68 kN | — | — | 0.08 kg80 g |
| TIMKEN6005H-2RS/VSL609Deep groove ball bearing |
| 5.89 kN | 4.68 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-RSDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-RS-C3Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-ZDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-Z-C3Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.8 kg800 g |
| TIMKEN6005-Z-NRDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.8 kg800 g |
| TIMKEN6005-ZZDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-ZZ-C2Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-ZZ-C3Deep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| TIMKEN6005-ZZ-NRDeep groove ball bearing |
| 10.1 kN | 5.83 kN | — | — | 0.08 kg80 g |
| NSK6005DDUDeep groove ball bearing |
| 11.1 kN | 5.85 kN | — | — | — |
| NSK6005VVDeep groove ball bearing |
| 11.1 kN | 5.85 kN | — | — | — |
| NSK6005ZZDeep groove ball bearing |
| 11.1 kN | 5.85 kN | — | — | — |
| KOYO6005 2RDDeep groove ball bearing |
| 12.6 kN | 5.85 kN | — | 14000 rpmLimiting Speeds(Grease Lub.): 14000 min-1 | 0.08 kg80 g |
| KOYO6005 2RSDeep groove ball bearing |
| 12.6 kN | 5.85 kN | — | 9000 rpmLimiting Speeds(Grease Lub.): 9000 min-1 | 0.08 kg80 g |
| KOYO6005 2RUDeep groove ball bearing |
| 12.6 kN | 5.85 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1 | 0.08 kg80 g |
| KOYO6005NRDeep groove ball bearing |
| 12.6 kN | 5.85 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1Limiting Speeds(Oil Lub.): 18000 min-1 | 0.08 kg80 g |
| KOYO6005 ZZDeep groove ball bearing |
| 12.6 kN | 5.85 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1 | 0.08 kg80 g |
| NACHI6005-2NKE9Deep groove ball bearing |
| 12.7 kN | 5.85 kN | — | — | — |
| NACHI6005-2NSE9Deep groove ball bearing |
| 12.7 kN | 5.85 kN | — | — | — |
| NACHI6005NKE9Deep groove ball bearing |
| 12.7 kN | 5.85 kN | — | — | — |
| NACHI6005NSE9Deep groove ball bearing |
| 12.7 kN | 5.85 kN | — | — | — |
| NACHI6005ZEDeep groove ball bearing |
| 12.7 kN | 5.85 kN | — | — | — |
| NACHI6005ZZEDeep groove ball bearing |
| 12.7 kN | 5.85 kN | — | — | — |
| NTN6005LUDeep groove ball bearing |
| 11.2 kN | 5.85 kN | — | — | 0.08 kg80 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6005 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6005 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6005 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6005 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6005 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6005-2RSH | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6005-2RSH/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6005-2RSH/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6005-2RSH/C4 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6005-2RSHNR | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6005-2RSH/VA947 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Food grade grease |
| SKF 6005-2RSH/W64 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Solid Oil |
| SKF 6005 2RSJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6005-2RSL | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6005-2RSLTN9/C3VT162 | Seal on both sides | Not recorded | C3 | Non-metallic | Bearing steel | Grease |
| SKF 6005-2RSLTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6005-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6005-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6005-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6005-2Z/C3VT127 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6005 2ZJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6005-2Z/LHT23 | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6005-2Z/MT33 | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6005-2ZNR | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6005-2Z/VA201 | Shield on both sides | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6005-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6005/AXD | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6005/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6005 JEM | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6005 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6005-RSH | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6005 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6005-RSL | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6005 TN9/C3 | Without | Not recorded | C3 | Non-metallic | Bearing steel | None |
| SKF 6005/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6005-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6005-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6005 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6005-C-2BRS>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6005-C-2HRS-C2>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6005-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6005-C-2HRS-L038-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6005-C-2HRS-L038>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6005-C-2HRS-L069>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6005-C-2HRS-L138-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6005-C-2HRS-L207-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6005-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6005-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6005-C-2Z-L038-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6005-C-2Z-L038-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6005-C-2Z-L038>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6005-C-2Z-L207-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6005-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6005-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6005-C-C4>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6005-C-HRS-C3>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6005-C-HRS>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6005-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6005-C-Z-C3>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6005-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6005-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6005-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6005-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6005-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6005-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6005-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6005-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-2RZ-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-2RZ-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005H-2RS | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6005H-2RS/FVSL531 | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6005H-2RS/FVSL613 | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6005H-2RS/VSL609 | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-Z-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-ZZ-C2 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6005-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6005DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6005VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6005ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6005 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6005 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6005 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6005NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6005 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6005-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6005-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6005NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6005NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6005ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6005ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NTN 6005LU | contact seal on one side | Not recorded | CN | pressed steel cage | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
SKF
6005
Deep groove ball bearing
View full technical record →TIMKEN6005
Deep groove ball bearing
View full technical record →KOYO6005
Deep groove ball bearing
View full technical record →NSK6005
Deep groove ball bearing
View full technical record →NACHI6005
Deep groove ball bearing
View full technical record →NACHI6005-2NKE9
Deep groove ball bearing
View full technical record →NACHI6005-2NSE9
Deep groove ball bearing
View full technical record →KOYO6005 2RD
Deep groove ball bearing
View full technical record →TIMKEN6005-2RS
Deep groove ball bearing
View full technical record →KOYO6005 2RS
Deep groove ball bearing
View full technical record →TIMKEN6005-2RS-C3
Deep groove ball bearing
View full technical record →TIMKEN6005-2RS-C3/VSL609
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.