6004Z bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6004Z. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6004Z — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6004Z | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6004Z dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 13 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6004Z
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6004-Z — 3 dimension fields
Deep groove ball bearing with seals or shields. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 20.0 mm |
| Outside diameter | Not supplied separately | 42.0 mm |
| Width | Not supplied separately | 12.0 mm |
TIMKEN 6004-Z — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 20 mm |
| O.D. (D) | D | 42 mm / 1.654 in |
| Width (B) | B | 12 mm / 0.472 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6004-ZDeep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0671 kg67.1 g |
| TIMKEN6004-ZDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| SKF6004-Z/C3Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0671 kg67.1 g |
| SKF6004 ZJEMDeep groove ball bearing |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.069 kg69 g |
| TIMKEN6004-Z-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-Z-NR-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-ZZDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-ZZ-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-ZZ-NRDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| NSK6004ZZDeep groove ball bearing |
| 10.3 kN | 5 kN | — | — | — |
| KOYO6004 ZZDeep groove ball bearing |
| 11.7 kN | 5.05 kN | — | 17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1 | 0.069 kg69 g |
| NACHI6004ZEDeep groove ball bearing |
| 11.8 kN | 5 kN | — | — | — |
| NACHI6004ZZEDeep groove ball bearing |
| 11.8 kN | 5 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6004-Z | Shield on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6004-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| SKF 6004-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6004 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| TIMKEN 6004-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6004ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6004 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6004-Z
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6004-Z
Deep groove ball bearing
View full technical record →SKF6004-Z/C3
Deep groove ball bearing with seals or shields
View full technical record →TIMKEN6004-Z-C3
Deep groove ball bearing
View full technical record →NACHI6004ZE
Deep groove ball bearing
View full technical record →SKF6004 ZJEM
Deep groove ball bearing
View full technical record →TIMKEN6004-Z-NR-C3
Deep groove ball bearing
View full technical record →TIMKEN6004-ZZ
Deep groove ball bearing
View full technical record →KOYO6004 ZZ
Deep groove ball bearing
View full technical record →NSK6004ZZ
Deep groove ball bearing
View full technical record →TIMKEN6004-ZZ-C3
Deep groove ball bearing
View full technical record →NACHI6004ZZE
Deep groove ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.