6004 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6004. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6004 — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6004 | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
| NSK catalogue record6004DDU | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
| NSK catalogue record6004DDUNR | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
| NSK catalogue record6004DU | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
| NSK catalogue record6004NR | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
| NSK catalogue record6004VV | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
| NSK catalogue record6004Z | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
| NSK catalogue record6004ZZ | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
| NSK catalogue record6004ZZNR | 20 mm | 42 mm | 12 mm | Printed p. 35Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6004 dimensions and recorded technical data
The recorded 6004 base designation measures 20×42×12 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 128 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6004
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6004/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 20.0 mm |
| Outside diameter | Not supplied separately | 42.0 mm |
| Width | Not supplied separately | 12.0 mm |
SKF 6004 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 20 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 42 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.009 to 0 mm |
| Width | B | 12 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 27.2 mm |
| Recess diameter | D 2 | ≈ 37.19 mm |
| Chamfer dimension | r 1,2 | min. 0.6 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 23.2 mm |
| Diameter of housing abutment | D a | max. 38.8 mm |
| Radius of shaft or housing fillet | r a | max. 0.6 mm |
KOYO 6004 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 20 mm |
| Outside diameter | D | 42 mm |
| Width | B | 12 mm |
KOYO 6004 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 20 mm |
| Outside diameter | D | 42 mm |
| Width | B | 12 mm |
TIMKEN 6004-2RS-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 20 mm |
| O.D. (D) | D | 42 mm / 1.654 in |
| Width (B) | B | 12 mm / 0.472 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
TIMKEN 6004 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 20 mm |
| O.D. (D) | D | 42 mm / 1.654 in |
| Width (B) | B | 12 mm / 0.472 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
TIMKEN 6004-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 20 mm |
| O.D. (D) | D | 42 mm / 1.654 in |
| Width (B) | B | 12 mm / 0.472 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.6 mm / 0.024 in |
Catalogue parameters for 6004
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6004/C3 — 21 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 20.0 mm |
| Outside diameter | Not separately recorded | 42.0 mm |
| Width | Not separately recorded | 12.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 9.95 kN |
| Basic static load rating | Not separately recorded | 5.0 kN |
| Reference speed | Not separately recorded | 38000.0 r/min |
| Limiting speed | Not separately recorded | 24000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | C3 |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 0.24 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.0656 kg |
SKF 6004 — 49 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
SKF 6004 dimensional tolerances: the nominal bearing size is not the finished shaft or housing size. The following limits are calculated from this exact product record by adding the signed deviation to the nominal bearing dimension.
Bore mid-range size: nominal 20 mm; recorded deviation -0.008 to 0 mm; calculated interval 19.992–20.000 mm. Source symbol: t Δdmp.
Outside-diameter mid-range size: nominal 42 mm; recorded deviation -0.009 to 0 mm; calculated interval 41.991–42.000 mm. Source symbol: t ΔDmp.
Ring width: nominal 12 mm; recorded deviation -0.06 to 0 mm; calculated interval 11.940–12.000 mm. Source symbol: t ΔBs.
The source lists dimensional class "P6 and tighter width tolerance" and geometrical class "P5" separately. Do not collapse those two statements into one ABEC label or transfer them to another brand or suffix.
For cylindrical bores, the mid-range diameter is formed from the largest and smallest two-point sizes in a cross-section. Its allowable deviation is not a limit on every individual two-point measurement. Form variation and run-out are separate checks (SKF Rolling bearings, Table 13, printed pages 49–50).
A shaft/housing fit must be chosen separately for load direction, ring rotation, temperature and installation conditions. These bearing dimensions alone do not approve H7, k6, an interference fit, or an operating clearance.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 20.0 mm |
| Outside diameter | Not separately recorded | 42.0 mm |
| Width | Not separately recorded | 12.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 9.95 kN |
| Basic static load rating | Not separately recorded | 5.0 kN |
| Reference speed | Not separately recorded | 38000.0 r/min |
| Limiting speed | Not separately recorded | 24000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 0.24 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.0656 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 20 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.008 to 0 mm |
| Outside diameter | D | 42 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.009 to 0 mm |
| Width | B | 12 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 27.2 mm |
| Recess diameter | D 2 | ≈ 37.19 mm |
| Chamfer dimension | r 1,2 | min. 0.6 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 23.2 mm |
| Diameter of housing abutment | D a | max. 38.8 mm |
| Radius of shaft or housing fillet | r a | max. 0.6 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 9.95 kN |
| Basic static load rating | C 0 | 5 kN |
| Fatigue load limit | P u | 0.212 kN |
| Reference speed | Not separately recorded | 38000 r/min |
| Limiting speed | Not separately recorded | 24000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 14 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 4 µm |
| Maximum run-out of inner ring side face to the bore | t Sd | 8 µm |
| Maximum axial run-out of inner ring of assembled bearing | t Sia | 8 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 7 µm |
| Perpendicularity of outer ring outside surface | t SD | 4 µm |
| Maximum axial run-out of outer ring of assembled bearing | t Sea | 8 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P5 |
KOYO 6004 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
The plain KOYO 6004 record is open. For a sealed candidate, inspect the separate KOYO 6004 2RS record; for a shielded candidate, inspect KOYO 6004 ZZ. Both are listed in this page’s exact-designation references with their own parameters. The base number alone does not specify a closure.
These are distinct catalogue constructions, not a suggestion to add a loose seal to an open bearing. Seal replacement or removal requires the original assembly information; no loose-seal part number or equipment fitment is established by these records.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 20 mm |
| D | Not separately recorded | 42 mm |
| B | Not separately recorded | 12 mm |
| R(Min.) | Not separately recorded | 0.6 mm |
| Basic Load Ratings : Cr | Not separately recorded | 11.7 kN |
| Basic Load Ratings : C0R | Not separately recorded | 5.05 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.350 kN |
| Factor : F0 | Not separately recorded | 13.9 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 17000 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 21000 min-1 |
| Da(Min.) | Not separately recorded | 24 mm |
| Da(Max.) | Not separately recorded | 38 mm |
| Ra(Max.) | Not separately recorded | 0.6 mm |
| Mass(Refer.) | Not separately recorded | 0.069 kg |
NSK 6004 — 15 recorded parameters
Single row deep groove ball bearings
Reference: NSK Rolling Bearings catalogue E1103c, Part C; source snapshot 2026-10-02.
For this exact NSK 6004 record, the nominal envelope is 20×42×12 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.
Calculated inch equivalent: 0.787402×1.653543×0.472441 in, in the same axis order. The conversion uses exactly 25.4 mm per inch and rounds to six decimals; it is not an inch-series designation or a machining tolerance.
Recorded closure for 6004: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.
Use grease- and oil-qualified speed entries only for the named lubrication condition. Dynamic C and static C0 are catalogue ratings, not a universal safe load or installation approval; shoulder and fillet limits are separate from boundary size.
Boundary dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 20 mm |
| Outside diameter | D | 42 mm |
| Bearing width | B | 12 mm |
| Minimum bearing chamfer | r min. | 0.6 mm |
Load ratings
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic radial load rating | Cr | 10300 N |
| Basic static radial load rating | C0r | 5000 N |
| Equivalent-load calculation factor | f0 | 13.8 |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum shaft shoulder diameter | da min. | 24 mm |
| Maximum shaft shoulder diameter | da max. | 25.5 mm |
| Maximum housing shoulder diameter | Da max. | 38 mm |
| Maximum shaft or housing fillet radius | ra max. | 0.6 mm |
Lubrication-qualified speed
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Limiting speed with grease | Not separately recorded | 20000 r/min |
| Limiting speed with oil (open bearing) | Not separately recorded | 24000 r/min |
Reference mass
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Approximate catalogue mass (open reference) | Not separately recorded | 0.068 kg |
Construction
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue closure construction | Not separately recorded | Open |
NACHI 6004 — 15 recorded parameters
Deep groove ball bearing
Reference: NACHI Deep Groove Ball Bearings catalogue B3402E-2; source snapshot 2026-10-02.
For this exact NACHI 6004 record, the nominal envelope is 20×42×12 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.
Calculated inch equivalent: 0.787402×1.653543×0.472441 in, in the same axis order. The conversion uses exactly 25.4 mm per inch and rounds to six decimals; it is not an inch-series designation or a machining tolerance.
Recorded closure for 6004: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.
Use grease- and oil-qualified speed entries only for the named lubrication condition. Dynamic C and static C0 are catalogue ratings, not a universal safe load or installation approval; shoulder and fillet limits are separate from boundary size.
Boundary dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 20 mm |
| Outside diameter | D | 42 mm |
| Bearing width | B | 12 mm |
| Minimum bearing chamfer | r min. | 0.6 mm |
Load ratings
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic radial load rating | Cr | 11800 N |
| Basic static radial load rating | C0r | 5000 N |
Equivalent-load factors
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue load calculation factor | f0 | 13.9 |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum shaft shoulder diameter | da min. | 24 mm |
| Maximum housing shoulder diameter | Da max. | 38 mm |
| Maximum adjacent fillet radius | ra max. | 0.6 mm |
Construction
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Closure arrangement | Not separately recorded | Open |
| Listed closure suffix | Not separately recorded | None (open type) |
Reference mass
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue row mass (variants not individually specified) | Not separately recorded | 0.07 kg |
Lubrication-qualified speed
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Limiting speed with grease (open) | Not separately recorded | 18000 r/min |
| Limiting speed with oil (open) | Not separately recorded | 21000 r/min |
KOYO 6004 2RS — 16 recorded parameters
Deep groove ball bearing
Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.
Looking for a 6004 sealed bearing? KOYO 6004 2RS is a recorded catalogue candidate with contact seals on both sides. Its recorded nominal size is 20×42×12 mm, in the order bore d × outside diameter D × width B.
In JTEKT / KOYO Table 6-2, 2RS identifies contact seals on both sides. The corresponding one-sided code is RS. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6004 base record into a sealed or shielded version.
Select the full marking, not the base number alone. Compare the grease-qualified speed, clearance, material and mounting dimensions of the candidate record before using it. A closure designation does not supply a waterproof rating, chemical-resistance certificate or approved replacement relationship.
The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.
Classification
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Official Category Path | Not separately recorded | Deep groove ball bearings - Single-row - Shielded/sealed type - Contact sealed |
| Official Classification 1 | Not separately recorded | Deep groove ball bearings / Single-row / Shielded/sealed type / Contact sealed |
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 20 mm |
| D | Not separately recorded | 42 mm |
| B | Not separately recorded | 12 mm |
| R(Min.) | Not separately recorded | 0.6 mm |
| Basic Load Ratings : Cr | Not separately recorded | 11.7 kN |
| Basic Load Ratings : C0R | Not separately recorded | 5.05 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.350 kN |
| Factor : F0 | Not separately recorded | 13.9 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 10000 min-1 |
| Da(Min.) | Not separately recorded | 24 mm |
| Da(Max.) | Not separately recorded | 25 mm |
| Da(Max.) | Not separately recorded | 38 mm |
| Ra(Max.) | Not separately recorded | 0.6 mm |
| Mass(Refer.) | Not separately recorded | 0.069 kg |
KOYO 6004 ZZ — 16 recorded parameters
Deep groove ball bearing
Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.
Looking for a 6004 shielded bearing? KOYO 6004 ZZ is a recorded catalogue candidate with fixed shields on both sides. Its recorded nominal size is 20×42×12 mm, in the order bore d × outside diameter D × width B.
In JTEKT / KOYO Table 6-2, ZZ identifies fixed shields on both sides. The corresponding one-sided code is Z. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6004 base record into a sealed or shielded version.
Select the full marking, not the base number alone. Compare the grease-qualified speed, clearance, material and mounting dimensions of the candidate record before using it. A closure designation does not supply a waterproof rating, chemical-resistance certificate or approved replacement relationship.
The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.
Classification
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Official Category Path | Not separately recorded | Deep groove ball bearings - Single-row - Shielded/sealed type - Shielded ZZ |
| Official Classification 1 | Not separately recorded | Deep groove ball bearings / Single-row / Shielded/sealed type / Shielded ZZ |
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 20 mm |
| D | Not separately recorded | 42 mm |
| B | Not separately recorded | 12 mm |
| R(Min.) | Not separately recorded | 0.6 mm |
| Basic Load Ratings : Cr | Not separately recorded | 11.7 kN |
| Basic Load Ratings : C0R | Not separately recorded | 5.05 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.350 kN |
| Factor : F0 | Not separately recorded | 13.9 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 17000 min-1 |
| Da(Min.) | Not separately recorded | 24 mm |
| Da(Max.) | Not separately recorded | 25 mm |
| Da(Max.) | Not separately recorded | 38 mm |
| Ra(Max.) | Not separately recorded | 0.6 mm |
| Mass(Refer.) | Not separately recorded | 0.069 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6004Deep groove ball bearing |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0656 kg65.6 g |
| TIMKEN6004Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| NSK6004Deep groove ball bearing |
| 10.3 kN | 5 kN | — | — | 0.068 kg68 g |
| KOYO6004Deep groove ball bearing |
| 11.7 kN | 5.05 kN | — | 17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 21000 min-1 | 0.069 kg69 g |
| NACHI6004Deep groove ball bearing |
| 11.8 kN | 5 kN | — | — | 0.07 kg70 g |
| SKF6004-2RS1/C3VM045Deep groove ball bearing |
| — | — | — | — | 0.0685 kg68.5 g |
| SKF6004-2RS2/C3GWPDeep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0674 kg67.4 g |
| SKF6004-2RSHDeep groove ball bearing with seals |
| 9.95 kN | 5 kN | — | 11000 rpm | 0.0676 kg67.6 g |
| SKF6004-2RSH/C3Deep groove ball bearing with seals |
| 9.95 kN | 5 kN | 38000 rpm | 11000 rpm | 0.0638 kg63.8 g |
| SKF6004-2RSH/C3GJNDeep groove ball bearing with seals |
| 9.95 kN | 5 kN | — | 11000 rpm | 0.0676 kg67.6 g |
| SKF6004-2RSH/C4GJNDeep groove ball bearing with seals |
| 9.95 kN | 5 kN | — | 11000 rpm | 0.0676 kg67.6 g |
| SKF6004-2RSHNRDeep groove ball bearing |
| 9.95 kN | 5 kN | — | 11000 rpm | 0.0691 kg69.1 g |
| SKF6004-2RSHTN9/C4HTDeep groove ball bearing |
| — | — | — | — | 0.063 kg63 g |
| SKF6004-2RSH/VA947SKF Food line deep groove ball bearing with seals |
| 9.95 kN | 5 kN | — | 11000 rpm | 0.069 kg69 g |
| SKF6004-2RSH/W64Deep groove ball bearing |
| 9.95 kN | 5 kN | — | 7600 rpm | 0.07 kg70 g |
| SKF6004 2RSJEMDeep groove ball bearing |
| 9.95 kN | 5 kN | — | 11000 rpm | 0.0708 kg70.8 g |
| SKF6004-2RSLDeep groove ball bearing with seals |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0676 kg67.6 g |
| SKF6004-2RSL/C3Deep groove ball bearing with seals |
| 9.95 kN | 5 kN | 38000 rpm | — | 0.0677 kg67.7 g |
| SKF6004-2RSLTN9/C3VT162Deep groove ball bearing |
| — | — | — | — | 0.0635 kg63.5 g |
| SKF6004-2RSLTN9/HC5C3WTHybrid ceramic deep groove ball bearing with low-friction seals on both sides |
| 9.36 kN | 5 kN | 43000 rpm | 19000 rpm | 0.062 kg62 g |
| SKF6004-2RZ/LHT23Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0676 kg67.6 g |
| SKF6004-2RZTN9/C3VT162Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0684 kg68.4 g |
| SKF6004-2ZDeep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0721 kg72.1 g |
| SKF6004-2Z/C2ELHT23Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | — | — | 0.0684 kg68.4 g |
| SKF6004-2Z/C3Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0684 kg68.4 g |
| SKF6004-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0684 kg68.4 g |
| SKF6004-2Z/C3LHT23Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0712 kg71.2 g |
| SKF6004 2ZJEMDeep groove ball bearing |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0714 kg71.4 g |
| SKF6004-2Z/LHT23Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | — | — | 0.0684 kg68.4 g |
| SKF6004-2ZNRDeep groove ball bearing with snap ring and integral sealing |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.077 kg77 g |
| SKF6004-2ZTN9/C3LLHT23Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | — | — | 0.0649 kg64.9 g |
| SKF6004-2Z/VA201Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 5 kN | — | 140 rpm | 0.069 kg69 g |
| SKF6004-2Z/VA208Deep groove ball bearing for high temperature applications with shields on both sides |
| — | 5 kN | — | 140 rpm | 0.0656 kg65.6 g |
| SKF6004/C3Deep groove ball bearing |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0656 kg65.6 g |
| SKF6004 JEMDeep groove ball bearing |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0674 kg67.4 g |
| SKF6004 NRDeep groove ball bearing with snap ring |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0697 kg69.7 g |
| SKF6004-RSHDeep groove ball bearing with seals |
| 9.95 kN | 5 kN | — | 11000 rpm | 0.0641 kg64.1 g |
| SKF6004 RSJEMDeep groove ball bearing |
| 9.95 kN | 5 kN | — | 11000 rpm | 0.0687 kg68.7 g |
| SKF6004-RSLDeep groove ball bearing with seals |
| 9.95 kN | 5 kN | 38000 rpm | 19000 rpm | 0.0641 kg64.1 g |
| SKF6004 TN9/C3Deep groove ball bearing |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0618 kg61.8 g |
| SKF6004/VA201Deep groove ball bearing for high temperature applications |
| — | 5 kN | — | 140 rpm | 0.07 kg70 g |
| SKF6004-ZDeep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0671 kg67.1 g |
| SKF6004-Z/C3Deep groove ball bearing with seals or shields |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.0671 kg67.1 g |
| SKF6004 ZJEMDeep groove ball bearing |
| 9.95 kN | 5 kN | 38000 rpm | 24000 rpm | 0.069 kg69 g |
| FAG6004-C-2BRS-L091-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2BRS>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.066 kg66 g |
| FAG6004-C-2HRS-C2>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2HRS-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2HRS-C4>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2HRS-L038-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2HRS-L038>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2HRS-L069>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2HRS-L100-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.063 kg63 g |
| FAG6004-C-2HRS-L100-C4>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.063 kg63 g |
| FAG6004-C-2HRS-L138-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.066 kg66 g |
| FAG6004-C-2HRS-L138-CM>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.066 kg66 g |
| FAG6004-C-2HRS-L138>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.066 kg66 g |
| FAG6004-C-2HRS-L207-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2HRS-L207>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2HRS>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-C2>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-C4>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-L038-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-L038-C4>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-L038>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-L069-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-L138-C2>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.066 kg66 g |
| FAG6004-C-2Z-L138-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.066 kg66 g |
| FAG6004-C-2Z-L138-CM>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.066 kg66 g |
| FAG6004-C-2Z-L138>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.066 kg66 g |
| FAG6004-C-2Z-L207-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-L207>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-2Z-NR>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.068 kg68 g |
| FAG6004-C-2Z-TVH-C2>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.063 kg63 g |
| FAG6004-C-2Z-TVH-L038-CM>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.063 kg63 g |
| FAG6004-C-2Z>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 23200 rpm | 0.065 kg65 g |
| FAG6004-C-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 27500 rpm | 0.061 kg61 g |
| FAG6004-C-C4>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 27500 rpm | 0.061 kg61 g |
| FAG6004-C-H305>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 27500 rpm | 0.065 kg65 g |
| FAG6004-C-HRS-C2>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.061 kg61 g |
| FAG6004-C-HRS-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.061 kg61 g |
| FAG6004-C-HRS>VDeep groove ball bearing |
| 10.6 kN | 5 kN | — | 15300 rpm | 0.061 kg61 g |
| FAG6004-C-L138-C2>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 27500 rpm | 0.062 kg62 g |
| FAG6004-C-TVH-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 27500 rpm | 0.06 kg60 g |
| FAG6004-C>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 27500 rpm | 0.061 kg61 g |
| FAG6004-C-Z-C3>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 27500 rpm | 0.063 kg63 g |
| FAG6004-C-Z>VDeep groove ball bearing |
| 10.6 kN | 5 kN | 19700 rpm | 27500 rpm | 0.063 kg63 g |
| FAG6004-H-2RSR-C3>NDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | 9900 rpm | 0.071 kg71 g |
| FAG6004-H-2RSR>NDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | 9900 rpm | 0.071 kg71 g |
| FAG6004-H-2Z-C3>NDeep groove ball bearing |
| 9.38 kN | 5.03 kN | 18200 rpm | 21100 rpm | 0.071 kg71 g |
| FAG6004-H-2Z>NDeep groove ball bearing |
| 9.38 kN | 5.03 kN | 18200 rpm | 21100 rpm | 0.071 kg71 g |
| FAG6004-H-C3>NDeep groove ball bearing |
| 9.38 kN | 5.03 kN | 18200 rpm | 24800 rpm | 0.069 kg69 g |
| FAG6004-H>NDeep groove ball bearing |
| 9.38 kN | 5.03 kN | 18200 rpm | 24800 rpm | 0.069 kg69 g |
| TIMKEN6004-2RSDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-2RS-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-2RS-C3/VSL609Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-2RS-NRDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-2RS-NR-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-2RS/VSL609Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-2RZDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-2RZ-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-2RZ-NRDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-NRDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-RSDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-RS-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-ZDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-Z-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-Z-NR-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-ZZDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-ZZ-C3Deep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| TIMKEN6004-ZZ-NRDeep groove ball bearing |
| 9.38 kN | 5.03 kN | — | — | 0.07 kg70 g |
| NSK6004DDUDeep groove ball bearing |
| 10.3 kN | 5 kN | — | — | — |
| NSK6004VVDeep groove ball bearing |
| 10.3 kN | 5 kN | — | — | — |
| NSK6004ZZDeep groove ball bearing |
| 10.3 kN | 5 kN | — | — | — |
| KOYO6004 2RDDeep groove ball bearing |
| 11.7 kN | 5.05 kN | — | 15000 rpmLimiting Speeds(Grease Lub.): 15000 min-1 | 0.069 kg69 g |
| KOYO6004 2RSDeep groove ball bearing |
| 11.7 kN | 5.05 kN | — | 10000 rpmLimiting Speeds(Grease Lub.): 10000 min-1 | 0.069 kg69 g |
| KOYO6004 2RUDeep groove ball bearing |
| 11.7 kN | 5.05 kN | — | 17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1 | 0.069 kg69 g |
| KOYO6004NRDeep groove ball bearing |
| 11.7 kN | 5.05 kN | — | 17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1Limiting Speeds(Oil Lub.): 21000 min-1 | 0.069 kg69 g |
| KOYO6004RDeep groove ball bearing |
| 14.4 kN | 5.85 kN | — | 18000 rpmLimiting Speeds(Grease Lub.): 18000 min-1Limiting Speeds(Oil Lub.): 21000 min-1 | 0.073 kg73 g |
| KOYO6004 ZZDeep groove ball bearing |
| 11.7 kN | 5.05 kN | — | 17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1 | 0.069 kg69 g |
| NACHI6004-2NKE9Deep groove ball bearing |
| 11.8 kN | 5 kN | — | — | — |
| NACHI6004-2NSE9Deep groove ball bearing |
| 11.8 kN | 5 kN | — | — | — |
| NACHI6004NKE9Deep groove ball bearing |
| 11.8 kN | 5 kN | — | — | — |
| NACHI6004NSE9Deep groove ball bearing |
| 11.8 kN | 5 kN | — | — | — |
| NACHI6004ZEDeep groove ball bearing |
| 11.8 kN | 5 kN | — | — | — |
| NACHI6004ZZEDeep groove ball bearing |
| 11.8 kN | 5 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6004 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6004 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6004 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6004 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6004-2RS1/C3VM045 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6004-2RS2/C3GWP | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSH | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSH/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSH/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSH/C4GJN | Seal on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSHNR | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSHTN9/C4HT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6004-2RSH/VA947 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Food grade grease |
| SKF 6004-2RSH/W64 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Solid Oil |
| SKF 6004 2RSJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSL | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSL/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RSLTN9/C3VT162 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6004-2RSLTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6004-2RZ/LHT23 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6004-2RZTN9/C3VT162 | Seal on both sides | Not recorded | C3 | Non-metallic | Bearing steel | Grease |
| SKF 6004-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6004-2Z/C2ELHT23 | Shield on both sides | Not recorded | Not recorded | Sheet metal | Bearing steel | Grease |
| SKF 6004-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2Z/C3LHT23 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004 2ZJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6004-2Z/LHT23 | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6004-2ZNR | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6004-2ZTN9/C3LLHT23 | Shield on both sides | Not recorded | C3L | Non-metallic | Bearing steel | Grease |
| SKF 6004-2Z/VA201 | Shield on both sides | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6004-2Z/VA208 | Shield on both sides | Not recorded | Multiples of C5 | Non-metallic | High temperature steel | Solid lubricant |
| SKF 6004/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6004 JEM | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6004 NR | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6004-RSH | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6004 RSJEM | Seal on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6004-RSL | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6004 TN9/C3 | Without | Not recorded | C3 | Non-metallic | Bearing steel | None |
| SKF 6004/VA201 | Without | Not recorded | Multiples of C5 | Sheet metal | High temperature steel | Solid lubricant |
| SKF 6004-Z | Shield on one side | Not recorded | CN | Sheet metal | Bearing steel | None |
| SKF 6004-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6004 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6004-C-2BRS-L091-C3>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L091 — Grease (L091/customer specific) |
| FAG 6004-C-2BRS>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2HRS-C2>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2HRS-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2HRS-L038-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6004-C-2HRS-L038>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6004-C-2HRS-L069>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6004-C-2HRS-L100-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6004-C-2HRS-L100-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6004-C-2HRS-L138-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6004-C-2HRS-L138-CM>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6004-C-2HRS-L138>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6004-C-2HRS-L207-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6004-C-2HRS-L207>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6004-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2Z-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2Z-C4>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2Z-L038-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6004-C-2Z-L038-C4>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6004-C-2Z-L038>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6004-C-2Z-L069-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6004-C-2Z-L138-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6004-C-2Z-L138-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6004-C-2Z-L138-CM>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6004-C-2Z-L138>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6004-C-2Z-L207-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6004-C-2Z-L207>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6004-C-2Z-NR>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2Z-TVH-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-2Z-TVH-L038-CM>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6004-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6004-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-C-C4>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-C-H305>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-C-HRS-C2>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-C-HRS-C3>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-C-HRS>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-C-L138-C2>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6004-C-TVH-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 6004-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-C-Z-C3>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6004-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6004-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6004-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6004-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6004-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6004-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-2RS-NR-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-2RZ-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-NR | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-Z-NR-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6004-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6004DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6004VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6004ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6004 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6004 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6004 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6004NR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6004R | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6004 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6004ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6004
Deep groove ball bearing
View full technical record →TIMKEN6004
Deep groove ball bearing
View full technical record →KOYO6004
Deep groove ball bearing
View full technical record →NSK6004
Deep groove ball bearing
View full technical record →NACHI6004
Deep groove ball bearing
View full technical record →NACHI6004-2NKE9
Deep groove ball bearing
View full technical record →NACHI6004-2NSE9
Deep groove ball bearing
View full technical record →KOYO6004 2RD
Deep groove ball bearing
View full technical record →TIMKEN6004-2RS
Deep groove ball bearing
View full technical record →KOYO6004 2RS
Deep groove ball bearing
View full technical record →SKF6004-2RS1/C3VM045
Deep groove ball bearing
View full technical record →SKF6004-2RS2/C3GWP
Deep groove ball bearing with seals or shields
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.