6001 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 6001. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page6 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
6001 — source-labelled NSK dimensions
Nominal dimensions from the NSK Bearing Replacement Guide, reference BRG/C/E/11.15. This is a historical catalogue reference, checked 2026-10-03; it is not a current product-availability list or an interchange approval. Each row preserves its complete printed designation.
| Complete NSK designation | Bore d | Outside D | Width B | Source page / boundary |
|---|---|---|---|---|
| NSK catalogue record6001 | 12 mm | 28 mm | 8 mm | Printed p. 30Nominal envelope only; complete execution as marked |
| NSK catalogue record6001DDU | 12 mm | 28 mm | 8 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6001DU | 12 mm | 28 mm | 8 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6001VV | 12 mm | 28 mm | 8 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6001Z | 12 mm | 28 mm | 8 mm | Printed p. 31Nominal envelope only; complete execution as marked |
| NSK catalogue record6001ZZ | 12 mm | 28 mm | 8 mm | Printed p. 31Nominal envelope only; complete execution as marked |
Read d×D×B together. Equal outside dimensions do not prove equal seals, internal clearance, precision, load ratings, lubricant or speed limits. Those properties are not supplied by this dimensional table. A DU, DDU, Z, ZZ, VV, DD or other marking is kept as printed; missing suffix records are not created from a base model.
6001 dimensions and recorded technical data
The recorded 6001 base designation measures 12×28×8 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from SKF, NSK, KOYO, NACHI. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 110 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 6001
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
SKF 6001/C3 — 3 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
The source gives named dimensions but no drawing symbol for some values. An unqualified width is not relabelled as inner-ring B or assembly T.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not supplied separately | 12.0 mm |
| Outside diameter | Not supplied separately | 28.0 mm |
| Width | Not supplied separately | 8.0 mm |
SKF 6001 — 12 dimension fields
Deep groove ball bearing. Source: SKF product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Minimum and maximum mounting dimensions are limits, not nominal bearing dimensions. Check shaft/housing shoulders and fillets against the current drawing before designing a seat.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.007 to 0 mm |
| Outside diameter | D | 28 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.008 to 0 mm |
| Width | B | 8 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 17 mm |
| Recess diameter | D 2 | ≈ 24.72 mm |
| Chamfer dimension | r 1,2 | min. 0.3 mm |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 14 mm |
| Diameter of housing abutment | D a | max. 26 mm |
| Radius of shaft or housing fillet | r a | max. 0.3 mm |
KOYO 6001 — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Outside diameter | D | 28 mm |
| Width | B | 8 mm |
KOYO 6001 2RS — 3 dimension fields
Deep groove ball bearing. Source: JTEKT / Koyo product catalogue; recorded snapshot 2026-09-02.
Use the complete designation shown here. A seal, cage, clearance or precision suffix can matter even when nominal boundary dimensions match.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Outside diameter | D | 28 mm |
| Width | B | 8 mm |
TIMKEN 6001-C3 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 12 mm |
| O.D. (D) | D | 28 mm / 1.102 in |
| Width (B) | B | 8 mm / 0.315 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.3 mm / 0.012 in |
TIMKEN 6001 — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 12 mm |
| O.D. (D) | D | 28 mm / 1.102 in |
| Width (B) | B | 8 mm / 0.315 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.3 mm / 0.012 in |
TIMKEN 6001-2RS — 4 dimension fields
Deep groove ball bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
Keep the full marking shown for this record. Equal nominal dimensions do not establish matching closure, clearance, precision, material or operating limits.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 12 mm |
| O.D. (D) | D | 28 mm / 1.102 in |
| Width (B) | B | 8 mm / 0.315 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 0.3 mm / 0.012 in |
Catalogue parameters for 6001
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 6001 — 49 recorded parameters
Deep groove ball bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 12.0 mm |
| Outside diameter | Not separately recorded | 28.0 mm |
| Width | Not separately recorded | 8.0 mm |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 5.4 kN |
| Basic static load rating | Not separately recorded | 2.36 kN |
| Reference speed | Not separately recorded | 60000.0 r/min |
| Limiting speed | Not separately recorded | 38000.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Filling slots | Not separately recorded | Without |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Matched arrangement | Not separately recorded | No |
| Radial internal clearance | Not separately recorded | CN |
| Material, bearing | Not separately recorded | Bearing steel |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Indicative carbon footprint for new product | Not separately recorded | 0.07 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 0.0195 kg |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Deviation limits of mid-range bore diameter | t Δdmp | -0.007 to 0 mm |
| Outside diameter | D | 28 mm |
| Deviation limits of mid-range outside diameter | t ΔDmp | -0.008 to 0 mm |
| Width | B | 8 mm |
| Deviation limits of ring width | t ΔBs | -0.06 to 0 mm |
| Shoulder diameter | d 1 | ≈ 17 mm |
| Recess diameter | D 2 | ≈ 24.72 mm |
| Chamfer dimension | r 1,2 | min. 0.3 mm |
| ISO tolerance class for dimensions | Not separately recorded | P6 and tighter width tolerance |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | min. 14 mm |
| Diameter of housing abutment | D a | max. 26 mm |
| Radius of shaft or housing fillet | r a | max. 0.3 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 5.4 kN |
| Basic static load rating | C 0 | 2.36 kN |
| Fatigue load limit | P u | 0.1 kN |
| Reference speed | Not separately recorded | 60000 r/min |
| Limiting speed | Not separately recorded | 38000 r/min |
| Minimum load factor | k r | 0.03 |
| Calculation factor | f 0 | 13 |
Engineering — Tolerances of run-out
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Range of section height at inner ring of assembled bearing | t Kia | 4 µm |
| Maximum run-out of inner ring side face to the bore | t Sd | 7 µm |
| Maximum axial run-out of inner ring of assembled bearing | t Sia | 7 µm |
| Range of section height at outer ring of assembled bearing | t Kea | 6 µm |
| Perpendicularity of outer ring outside surface | t SD | 4 µm |
| Maximum axial run-out of outer ring of assembled bearing | t Sea | 8 µm |
| ISO tolerance class for geometrical tolerances | Not separately recorded | P5 |
KOYO 6001 — 14 recorded parameters
Deep groove ball bearing
Reference: JTEKT / Koyo catalogue; source snapshot 2026-09-02.
The plain KOYO 6001 record is open. For a sealed candidate, inspect the separate KOYO 6001 2RS record; for a shielded candidate, inspect KOYO 6001 ZZ. Both are listed in this page’s exact-designation references with their own parameters. The base number alone does not specify a closure.
These are distinct catalogue constructions, not a suggestion to add a loose seal to an open bearing. Seal replacement or removal requires the original assembly information; no loose-seal part number or equipment fitment is established by these records.
Read the complete suffix and recorded construction. Similar dimensions do not prove identical seals, clearance, precision or material.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 12 mm |
| D | Not separately recorded | 28 mm |
| B | Not separately recorded | 8 mm |
| R(Min.) | Not separately recorded | 0.3 mm |
| Basic Load Ratings : Cr | Not separately recorded | 6.40 kN |
| Basic Load Ratings : C0R | Not separately recorded | 2.40 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.120 kN |
| Factor : F0 | Not separately recorded | 13.2 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 27000 min-1 |
| Limiting Speeds(Oil Lub.) | Not separately recorded | 32000 min-1 |
| Da(Min.) | Not separately recorded | 14 mm |
| Da(Max.) | Not separately recorded | 26 mm |
| Ra(Max.) | Not separately recorded | 0.3 mm |
| Mass(Refer.) | Not separately recorded | 0.022 kg |
NSK 6001 — 15 recorded parameters
Single row deep groove ball bearings
Reference: NSK Rolling Bearings catalogue E1103c, Part C; source snapshot 2026-10-02.
For this exact NSK 6001 record, the nominal envelope is 12×28×8 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.
Calculated inch equivalent: 0.472441×1.102362×0.314961 in, in the same axis order. The conversion uses exactly 25.4 mm per inch and rounds to six decimals; it is not an inch-series designation or a machining tolerance.
Recorded closure for 6001: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.
Use grease- and oil-qualified speed entries only for the named lubrication condition. Dynamic C and static C0 are catalogue ratings, not a universal safe load or installation approval; shoulder and fillet limits are separate from boundary size.
Boundary dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Outside diameter | D | 28 mm |
| Bearing width | B | 8 mm |
| Minimum bearing chamfer | r min. | 0.3 mm |
Load ratings
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic radial load rating | Cr | 5600 N |
| Basic static radial load rating | C0r | 2370 N |
| Equivalent-load calculation factor | f0 | 13 |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum shaft shoulder diameter | da min. | 14 mm |
| Maximum shaft shoulder diameter | da max. | 15.5 mm |
| Maximum housing shoulder diameter | Da max. | 26 mm |
| Maximum shaft or housing fillet radius | ra max. | 0.3 mm |
Lubrication-qualified speed
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Limiting speed with grease | Not separately recorded | 32000 r/min |
| Limiting speed with oil (open bearing) | Not separately recorded | 38000 r/min |
Reference mass
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Approximate catalogue mass (open reference) | Not separately recorded | 0.022 kg |
Construction
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue closure construction | Not separately recorded | Open |
NACHI 6001 — 15 recorded parameters
Deep groove ball bearing
Reference: NACHI Deep Groove Ball Bearings catalogue B3402E-2; source snapshot 2026-10-02.
For this exact NACHI 6001 record, the nominal envelope is 12×28×8 mm (d = bore diameter; D = outside diameter; B = bearing width). These are bearing or washer dimensions, not shaft/housing fit limits.
Calculated inch equivalent: 0.472441×1.102362×0.314961 in, in the same axis order. The conversion uses exactly 25.4 mm per inch and rounds to six decimals; it is not an inch-series designation or a machining tolerance.
Recorded closure for 6001: Open. Match the entire marking, including one-sided versus two-sided closure. A shared base number does not establish the same seal or shield across brands.
Use grease- and oil-qualified speed entries only for the named lubrication condition. Dynamic C and static C0 are catalogue ratings, not a universal safe load or installation approval; shoulder and fillet limits are separate from boundary size.
Boundary dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 12 mm |
| Outside diameter | D | 28 mm |
| Bearing width | B | 8 mm |
| Minimum bearing chamfer | r min. | 0.3 mm |
Load ratings
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic radial load rating | Cr | 6450 N |
| Basic static radial load rating | C0r | 2390 N |
Equivalent-load factors
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue load calculation factor | f0 | 13.2 |
Mounting dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Minimum shaft shoulder diameter | da min. | 14 mm |
| Maximum housing shoulder diameter | Da max. | 26 mm |
| Maximum adjacent fillet radius | ra max. | 0.3 mm |
Construction
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Closure arrangement | Not separately recorded | Open |
| Listed closure suffix | Not separately recorded | None (open type) |
Reference mass
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Catalogue row mass (variants not individually specified) | Not separately recorded | 0.023 kg |
Lubrication-qualified speed
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Limiting speed with grease (open) | Not separately recorded | 28000 r/min |
| Limiting speed with oil (open) | Not separately recorded | 32000 r/min |
KOYO 6001 2RS — 16 recorded parameters
Deep groove ball bearing
Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.
Looking for a 6001 sealed bearing? KOYO 6001 2RS is a recorded catalogue candidate with contact seals on both sides. Its recorded nominal size is 12×28×8 mm, in the order bore d × outside diameter D × width B.
In JTEKT / KOYO Table 6-2, 2RS identifies contact seals on both sides. The corresponding one-sided code is RS. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6001 base record into a sealed or shielded version.
Select the full marking, not the base number alone. Compare the grease-qualified speed, clearance, material and mounting dimensions of the candidate record before using it. A closure designation does not supply a waterproof rating, chemical-resistance certificate or approved replacement relationship.
The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.
Classification
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Official Category Path | Not separately recorded | Deep groove ball bearings - Single-row - Shielded/sealed type - Contact sealed |
| Official Classification 1 | Not separately recorded | Deep groove ball bearings / Single-row / Shielded/sealed type / Contact sealed |
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 12 mm |
| D | Not separately recorded | 28 mm |
| B | Not separately recorded | 8 mm |
| R(Min.) | Not separately recorded | 0.3 mm |
| Basic Load Ratings : Cr | Not separately recorded | 6.40 kN |
| Basic Load Ratings : C0R | Not separately recorded | 2.40 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.120 kN |
| Factor : F0 | Not separately recorded | 13.2 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 17000 min-1 |
| Da(Min.) | Not separately recorded | 14 mm |
| Da(Max.) | Not separately recorded | 15 mm |
| Da(Max.) | Not separately recorded | 26 mm |
| Ra(Max.) | Not separately recorded | 0.3 mm |
| Mass(Refer.) | Not separately recorded | 0.022 kg |
KOYO 6001 ZZ — 16 recorded parameters
Deep groove ball bearing
Reference: JTEKT / KOYO public product catalogue; source snapshot 2026-09-02.
Looking for a 6001 shielded bearing? KOYO 6001 ZZ is a recorded catalogue candidate with fixed shields on both sides. Its recorded nominal size is 12×28×8 mm, in the order bore d × outside diameter D × width B.
In JTEKT / KOYO Table 6-2, ZZ identifies fixed shields on both sides. The corresponding one-sided code is Z. This manufacturer-specific explanation is consistent with the classification of this exact product record; it does not turn every 6001 base record into a sealed or shielded version.
Select the full marking, not the base number alone. Compare the grease-qualified speed, clearance, material and mounting dimensions of the candidate record before using it. A closure designation does not supply a waterproof rating, chemical-resistance certificate or approved replacement relationship.
The original product parameters below retain their source units. An absent or dash-valued oil speed is unknown, not zero and not permission to use the grease speed for an oil-lubricated arrangement.
Classification
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Official Category Path | Not separately recorded | Deep groove ball bearings - Single-row - Shielded/sealed type - Shielded ZZ |
| Official Classification 1 | Not separately recorded | Deep groove ball bearings / Single-row / Shielded/sealed type / Shielded ZZ |
Technical Data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| d | Not separately recorded | 12 mm |
| D | Not separately recorded | 28 mm |
| B | Not separately recorded | 8 mm |
| R(Min.) | Not separately recorded | 0.3 mm |
| Basic Load Ratings : Cr | Not separately recorded | 6.40 kN |
| Basic Load Ratings : C0R | Not separately recorded | 2.40 kN |
| Fatigue Load Limit : Cu | Not separately recorded | 0.120 kN |
| Factor : F0 | Not separately recorded | 13.2 |
| Limiting Speeds(Grease Lub.) | Not separately recorded | 27000 min-1 |
| Da(Min.) | Not separately recorded | 14 mm |
| Da(Max.) | Not separately recorded | 15 mm |
| Da(Max.) | Not separately recorded | 26 mm |
| Ra(Max.) | Not separately recorded | 0.3 mm |
| Mass(Refer.) | Not separately recorded | 0.022 kg |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF6001Deep groove ball bearing |
| 5.4 kN | 2.36 kN | 60000 rpm | 38000 rpm | 0.0195 kg19.5 g |
| TIMKEN6001Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| NSK6001Deep groove ball bearing |
| 5.6 kN | 2.37 kN | — | — | 0.022 kg22 g |
| KOYO6001Deep groove ball bearing |
| 6.4 kN | 2.4 kN | — | 27000 rpmLimiting Speeds(Grease Lub.): 27000 min-1Limiting Speeds(Oil Lub.): 32000 min-1 | 0.022 kg22 g |
| NACHI6001Deep groove ball bearing |
| 6.45 kN | 2.39 kN | — | — | 0.023 kg23 g |
| SKF6001-2RS1/C3GJNDeep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | — | 17000 rpm | 0.0213 kg21.3 g |
| SKF6001-2RSHDeep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | — | 17000 rpm | 0.0206 kg20.6 g |
| SKF6001-2RSH/C3Deep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | 60000 rpm | 17000 rpm | 0.0201 kg20.1 g |
| SKF6001-2RSH/C3GJNDeep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | — | 17000 rpm | 0.0212 kg21.2 g |
| SKF6001-2RSH/LHT23Deep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | — | 17000 rpm | 0.0206 kg20.6 g |
| SKF6001-2RSH/VA947SKF Food line deep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | — | 17000 rpm | 0.021 kg21 g |
| SKF6001-2RSH/W64Deep groove ball bearing |
| 5.4 kN | 2.36 kN | — | 12000 rpm | 0.02 kg20 g |
| SKF6001 2RSJEMDeep groove ball bearing |
| 5.4 kN | 2.36 kN | — | 17000 rpm | 0.0245 kg24.5 g |
| SKF6001-2RSLDeep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0208 kg20.8 g |
| SKF6001-2RSL/C3Deep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0214 kg21.4 g |
| SKF6001-2RSLTN9/C3LHT23Deep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0196 kg19.6 g |
| SKF6001-2RSLTN9/HC5C3WTHybrid ceramic deep groove ball bearing with low-friction seals on both sides |
| 5.07 kN | 2.36 kN | 63000 rpm | 30000 rpm | 0.0178 kg17.8 g |
| SKF6001-2ZDeep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0217 kg21.7 g |
| SKF6001-2Z/C2Deep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0217 kg21.7 g |
| SKF6001-2Z/C3Deep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0217 kg21.7 g |
| SKF6001-2Z/C3GJNDeep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | — | — | 0.0217 kg21.7 g |
| SKF6001-2Z/C3LHT23Deep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0217 kg21.7 g |
| SKF6001-2Z/C3WTDeep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.021 kg21 g |
| SKF6001-2Z/C4S1VT127Deep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0206 kg20.6 g |
| SKF6001 2ZJEMDeep groove ball bearing |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0217 kg21.7 g |
| SKF6001-2Z/LHT23Deep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 30000 rpm | 0.0225 kg22.5 g |
| SKF6001/C3Deep groove ball bearing |
| 5.4 kN | 2.36 kN | 60000 rpm | 38000 rpm | 0.0201 kg20.1 g |
| SKF6001-RSHDeep groove ball bearing with seals |
| 5.4 kN | 2.36 kN | — | 17000 rpm | 0.0205 kg20.5 g |
| SKF6001-ZDeep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 38000 rpm | 0.0203 kg20.3 g |
| SKF6001-Z/C3Deep groove ball bearing with seals or shields |
| 5.4 kN | 2.36 kN | 60000 rpm | 38000 rpm | 0.0208 kg20.8 g |
| SKF6001 ZJEMDeep groove ball bearing |
| 5.4 kN | 2.36 kN | 60000 rpm | 38000 rpm | 0.0208 kg20.8 g |
| FAG6001-C-2BRS-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.02 kg20 g |
| FAG6001-C-2BRS-L091-C4>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.02 kg20 g |
| FAG6001-C-2BRS>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L038-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L038>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L069>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L100-C4>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L138-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L138-CM>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L138>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L207-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS-L207>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2HRS>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-2Z-C2>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.021 kg21 g |
| FAG6001-C-2Z-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.021 kg21 g |
| FAG6001-C-2Z-L038-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.021 kg21 g |
| FAG6001-C-2Z-L038>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.021 kg21 g |
| FAG6001-C-2Z-L069-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.02 kg20 g |
| FAG6001-C-2Z-L069>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.02 kg20 g |
| FAG6001-C-2Z-L138-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.021 kg21 g |
| FAG6001-C-2Z-L138>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.021 kg21 g |
| FAG6001-C-2Z-L207>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.021 kg21 g |
| FAG6001-C-2Z-TVH-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.019 kg19 g |
| FAG6001-C-2Z>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 36000 rpm | 0.021 kg21 g |
| FAG6001-C-C2>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.021 kg21 g |
| FAG6001-C-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.021 kg21 g |
| FAG6001-C-C4>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.021 kg21 g |
| FAG6001-C-H305-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.021 kg21 g |
| FAG6001-C-H305>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.021 kg21 g |
| FAG6001-C-HRS-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.021 kg21 g |
| FAG6001-C-HRS>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | — | 24900 rpm | 0.02 kg20 g |
| FAG6001-C-TVH-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.018 kg18 g |
| FAG6001-C>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.021 kg21 g |
| FAG6001-C-Z-C3>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.019 kg19 g |
| FAG6001-C-Z-C4>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.02 kg20 g |
| FAG6001-C-Z-TVH>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.019 kg19 g |
| FAG6001-C-Z>VDeep groove ball bearing |
| 5.9 kN | 2.37 kN | 26000 rpm | 42500 rpm | 0.019 kg19 g |
| FAG6001-H-2RSR-C3>NDeep groove ball bearing |
| 5.4 kN | 2.36 kN | — | 15400 rpm | 0.02 kg20 g |
| FAG6001-H-2RSR>NDeep groove ball bearing |
| 5.4 kN | 2.36 kN | — | 15400 rpm | 0.021 kg21 g |
| FAG6001-H-2Z-C3>NDeep groove ball bearing |
| 5.4 kN | 2.36 kN | 23200 rpm | 32000 rpm | 0.021 kg21 g |
| FAG6001-H-2Z>NDeep groove ball bearing |
| 5.4 kN | 2.36 kN | 23200 rpm | 32000 rpm | 0.021 kg21 g |
| FAG6001-H-C3>NDeep groove ball bearing |
| 5.4 kN | 2.36 kN | 23200 rpm | 37500 rpm | 0.019 kg19 g |
| FAG6001-H>NDeep groove ball bearing |
| 5.4 kN | 2.36 kN | 23200 rpm | 37500 rpm | 0.021 kg21 g |
| TIMKEN6001-2RSDeep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-2RS-C3Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-2RS-C3/VSL609Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-2RS-L671Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-2RS-NRDeep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-2RS/VSL609Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-2RZDeep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-2RZ-C3Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-C3Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001H-2RSDeep groove ball bearing |
| 4.34 kN | 1.9 kN | — | — | 0.02 kg20 g |
| TIMKEN6001H-2RS/FVSL528Deep groove ball bearing |
| 4.34 kN | 1.9 kN | — | — | 0.02 kg20 g |
| TIMKEN6001H-2RS/FVSL531Deep groove ball bearing |
| 4.34 kN | 1.9 kN | — | — | 0.02 kg20 g |
| TIMKEN6001H-2RS/FVSL613Deep groove ball bearing |
| 4.34 kN | 1.9 kN | — | — | 0.02 kg20 g |
| TIMKEN6001H-2RS/VSL609Deep groove ball bearing |
| 4.34 kN | 1.9 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-RSDeep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-RS-C3Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001/VSL609Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-ZDeep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-Z-C3Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-ZZDeep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-ZZ-C3Deep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| TIMKEN6001-ZZ-NRDeep groove ball bearing |
| 5.11 kN | 2.38 kN | — | — | 0.02 kg20 g |
| NSK6001DDUDeep groove ball bearing |
| 5.6 kN | 2.37 kN | — | — | — |
| NSK6001VVDeep groove ball bearing |
| 5.6 kN | 2.37 kN | — | — | — |
| NSK6001ZZDeep groove ball bearing |
| 5.6 kN | 2.37 kN | — | — | — |
| KOYO6001 2RDDeep groove ball bearing |
| 6.4 kN | 2.4 kN | — | 24000 rpmLimiting Speeds(Grease Lub.): 24000 min-1 | 0.022 kg22 g |
| KOYO6001 2RSDeep groove ball bearing |
| 6.4 kN | 2.4 kN | — | 17000 rpmLimiting Speeds(Grease Lub.): 17000 min-1 | 0.022 kg22 g |
| KOYO6001 2RUDeep groove ball bearing |
| 6.4 kN | 2.4 kN | — | 27000 rpmLimiting Speeds(Grease Lub.): 27000 min-1 | 0.022 kg22 g |
| KOYO6001 ZZDeep groove ball bearing |
| 6.4 kN | 2.4 kN | — | 27000 rpmLimiting Speeds(Grease Lub.): 27000 min-1 | 0.022 kg22 g |
| NACHI6001-2NKE9Deep groove ball bearing |
| 6.45 kN | 2.39 kN | — | — | — |
| NACHI6001-2NSE9Deep groove ball bearing |
| 6.45 kN | 2.39 kN | — | — | — |
| NACHI6001NKE9Deep groove ball bearing |
| 6.45 kN | 2.39 kN | — | — | — |
| NACHI6001NSE9Deep groove ball bearing |
| 6.45 kN | 2.39 kN | — | — | — |
| NACHI6001ZEDeep groove ball bearing |
| 6.45 kN | 2.39 kN | — | — | — |
| NACHI6001ZZEDeep groove ball bearing |
| 6.45 kN | 2.39 kN | — | — | — |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 6001 | Without | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| TIMKEN 6001 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6001 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6001 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6001 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| SKF 6001-2RS1/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2RSH | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6001-2RSH/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2RSH/C3GJN | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2RSH/LHT23 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6001-2RSH/VA947 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Food grade grease |
| SKF 6001-2RSH/W64 | Seal on both sides | Not recorded | CN | Sheet metal | Bearing steel | Solid Oil |
| SKF 6001 2RSJEM | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2RSL | Seal on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6001-2RSL/C3 | Seal on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2RSLTN9/C3LHT23 | Seal on both sides | Not recorded | C3 | Non-metallic | Bearing steel | Grease |
| SKF 6001-2RSLTN9/HC5C3WT | Seal on both sides | Not recorded | C3 | Non-metallic | Hybrid (ceramic balls) | Grease |
| SKF 6001-2Z | Shield on both sides | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | Grease |
| SKF 6001-2Z/C2 | Shield on both sides | Not recorded | C2 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2Z/C3 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2Z/C3GJN | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2Z/C3LHT23 | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2Z/C3WT | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2Z/C4S1VT127 | Shield on both sides | Not recorded | C4 | Sheet metal | Bearing steel | Grease |
| SKF 6001 2ZJEM | Shield on both sides | Not recorded | C3 | Sheet metal | Bearing steel | Grease |
| SKF 6001-2Z/LHT23 | Shield on both sides | Not recorded | CN | Sheet metal | Bearing steel | Grease |
| SKF 6001/C3 | Without | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6001-RSH | Seal on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6001-Z | Shield on one side | P6 and tighter width tolerance | CN | Sheet metal | Bearing steel | None |
| SKF 6001-Z/C3 | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| SKF 6001 ZJEM | Shield on one side | Not recorded | C3 | Sheet metal | Bearing steel | None |
| FAG 6001-C-2BRS-C3>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6001-C-2BRS-L091-C4>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L091 — Grease (L091/customer specific) |
| FAG 6001-C-2BRS>V | 2BRS — Non-contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6001-C-2HRS-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6001-C-2HRS-L038-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6001-C-2HRS-L038>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6001-C-2HRS-L069>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6001-C-2HRS-L100-C4>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | L100 — Grease (L100/customer specific) |
| FAG 6001-C-2HRS-L138-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6001-C-2HRS-L138-CM>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CM (Group M) — Internal clearance limited for electric motors | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6001-C-2HRS-L138>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6001-C-2HRS-L207-C3>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6001-C-2HRS-L207>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6001-C-2HRS>V | 2HRS — Contact seal on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6001-C-2Z-C2>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6001-C-2Z-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6001-C-2Z-L038-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6001-C-2Z-L038>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L038 — Grease (L038/customer specific) |
| FAG 6001-C-2Z-L069-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6001-C-2Z-L069>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L069 — Low noise high-temperature grease, interchangeable with grease L207 |
| FAG 6001-C-2Z-L138-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6001-C-2Z-L138>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L138 — Grease (L138/customer specific) |
| FAG 6001-C-2Z-L207>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | L207 — Low noise high-temperature grease, interchangeable with grease L069 |
| FAG 6001-C-2Z-TVH-C3>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6001-C-2Z>V | 2Z — Non-contact shield on both sides | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | GA14 — Ball bearing grease, low noise |
| FAG 6001-C-C2>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C2 (Group 2) — Internal clearance smaller than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-C4>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-H305-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-H305>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-HRS-C3>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-HRS>V | HRS — Contact seal on one side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-TVH-C3>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 6001-C>V | Without — Not sealed | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-Z-C3>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-Z-C4>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | C4 (Group 4) — Internal clearance larger than C3 | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-C-Z-TVH>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | TVH — Solid cage made of glass-fiber reinforced polyamid PA66 | Not recorded | Without — Bearing not greased |
| FAG 6001-C-Z>V | Z — Non-contact shield on one Side | P6 — Class 6 (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-H-2RSR-C3>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6001-H-2RSR>N | 2RSR — Contact seal on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6001-H-2Z-C3>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6001-H-2Z>N | 2Z — Non-contact shield on both sides | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Lubricating grease |
| FAG 6001-H-C3>N | Without — Not sealed | PN — Normal (ISO 492:2023) | C3 (Group 3) — Internal clearance larger than CN | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| FAG 6001-H>N | Without — Not sealed | PN — Normal (ISO 492:2023) | CN (Group N) — Normal internal clearance | JN — Steel sheet metal | Not recorded | Without — Bearing not greased |
| TIMKEN 6001-2RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-2RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-2RS-C3/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-2RS-L671 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-2RS-NR | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-2RS/VSL609 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-2RZ | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-2RZ-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-C3 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001H-2RS | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6001H-2RS/FVSL528 | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6001H-2RS/FVSL531 | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6001H-2RS/FVSL613 | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6001H-2RS/VSL609 | Sealed | Not recorded | Not recorded | Stainless Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-RS | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-RS-C3 | Sealed | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001/VSL609 | Open | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-Z | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-Z-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-ZZ | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-ZZ-C3 | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| TIMKEN 6001-ZZ-NR | Shielded | Not recorded | Not recorded | Steel cage | Not recorded | Not recorded |
| NSK 6001DDU | Contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6001VV | Non-contact rubber seals on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 6001ZZ | Metal shields on both sides | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6001 2RD | Extremely light contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6001 2RS | Contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6001 2RU | Non-contact sealed | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 6001 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6001-2NKE9 | Two non-contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6001-2NSE9 | Two contact seals | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6001NKE9 | One non-contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6001NSE9 | One contact seal | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6001ZE | One shield | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NACHI 6001ZZE | Two shields | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
6001
Deep groove ball bearing
View full technical record →TIMKEN6001
Deep groove ball bearing
View full technical record →KOYO6001
Deep groove ball bearing
View full technical record →NSK6001
Deep groove ball bearing
View full technical record →NACHI6001
Deep groove ball bearing
View full technical record →NACHI6001-2NKE9
Deep groove ball bearing
View full technical record →NACHI6001-2NSE9
Deep groove ball bearing
View full technical record →KOYO6001 2RD
Deep groove ball bearing
View full technical record →KOYO60012RDC4
Automotive bearing
View full technical record →TIMKEN6001-2RS
Deep groove ball bearing
View full technical record →KOYO6001 2RS
Deep groove ball bearing
View full technical record →SKF6001-2RS1/C3GJN
Deep groove ball bearing with seals or shields
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.