5206 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 5206. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
5206 dimensions and recorded technical data
The recorded 5206 base designation measures 30×62×23.8 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from NSK, KOYO. It does not assign the same dimensions or operating ratings to every suffix.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 6 recorded variants are listed. A dash means the value is missing, not zero.
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| NSK5206Angular contact ball bearing |
| 32.5 kN | 21.1 kN | — | — | 0.3 kg300 g |
| KOYO5206Angular contact ball bearing |
| 37.2 kN | 21.3 kN | — | 6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8600 min-1 | 0.29 kg290 g |
| NSK5206BDDUAngular contact ball bearing |
| 27.8 kN | 18.2 kN | — | — | — |
| NSK5206BZZAngular contact ball bearing |
| 27.8 kN | 18.2 kN | — | — | — |
| KOYO5206 2RSAngular contact ball bearing |
| 31.7 kN | 18.3 kN | — | 6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8600 min-1 | 0.29 kg290 g |
| KOYO5206 ZZAngular contact ball bearing |
| 31.7 kN | 18.3 kN | — | 6400 rpmLimiting Speeds(Grease Lub.): 6400 min-1Limiting Speeds(Oil Lub.): 8600 min-1 | 0.29 kg290 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| NSK 5206 | Open | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 5206 | Open | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| NSK 5206BDDU | Double contact sealed (DDU) | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| NSK 5206BZZ | Double shielded (ZZ) | Not recorded | Not recorded | Pressed steel | Not recorded | Not recorded |
| KOYO 5206 2RS | Sealed 2RS | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 5206 ZZ | Shielded ZZ | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
5206
Angular contact ball bearing
View full technical record →NSK5206
Angular contact ball bearing
View full technical record →KOYO5206 2RS
Angular contact ball bearing
View full technical record →NSK5206BDDU
Angular contact ball bearing
View full technical record →NSK5206BZZ
Angular contact ball bearing
View full technical record →KOYO5206 ZZ
Angular contact ball bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.