99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

3314 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 3314. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

3314 dimensions and recorded technical data

The recorded 3314 base designation measures 70×150×63.5 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 16 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO3314Angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
188 kN160 kN—2700 rpmLimiting Speeds(Grease Lub.): 2700 min-1Limiting Speeds(Oil Lub.): 3600 min-15.04 kg5040 g
SKF3314 ADouble row angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
163 kN125 kN5000 rpm4300 rpm4.47 kg4470 g
SKF3314 A-2Z/C3Double row angular contact ball bearing with seals or shields
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
63.5 mm
2.5 in
163 kN125 kN5000 rpm4300 rpm4.43 kg4430 g
SKF3314 A-2ZTN9/C3VT113Double row angular contact ball bearing with seals or shields
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
63.5 mm
2.5 in
163 kN125 kN5000 rpm4300 rpm4.42 kg4420 g
SKF3314 A/C3Double row angular contact ball bearing
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
63.5 mm
2.5 in
163 kN125 kN5000 rpm4300 rpm4.47 kg4470 g
SKF3314 ANRDouble row angular contact ball bearing
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
63.5 mm
2.5 in
163 kN125 kN5000 rpm4300 rpm4.47 kg4470 g
SKF3314 ANR/C3Double row angular contact ball bearing
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
63.5 mm
2.5 in
163 kN125 kN5000 rpm4300 rpm4.47 kg4470 g
SKF3314 A-Z/C3Double row angular contact ball bearing with seals or shields
Recorded bore (d)
70 mm
2.755906 in
Recorded outside dimension (D)
150 mm
5.905512 in
Catalogue width (symbol unverified)
63.5 mm
2.5 in
163 kN125 kN5000 rpm4300 rpm4.42 kg4420 g
FAG3314-BD-XLAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
172 kN135 kN5100 rpm4550 rpm4.59 kg4590 g
FAG3314-BD-XL-2HRS-TVHAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
172 kN135 kN—3400 rpm4.54 kg4540 g
FAG3314-BD-XL-2Z-TVHAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
172 kN135 kN5100 rpm3400 rpm4.5 kg4500 g
FAG3314-BD-XL-2Z-TVH-L140-C3Angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
172 kN135 kN5100 rpm3400 rpm4.55 kg4550 g
FAG3314-BD-XL-C3Angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
172 kN135 kN5100 rpm4550 rpm4.59 kg4590 g
FAG3314-BD-XL-TVHAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
172 kN135 kN5100 rpm4550 rpm4.48 kg4480 g
FAG3314-BD-XL-TVH-C3Angular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
172 kN135 kN5100 rpm4550 rpm4.5 kg4500 g
FAG3314-DAAngular contact ball bearing
Bore diameter (d)
70 mm
2.755906 in
Outside diameter (D)
150 mm
5.905512 in
Width (B)
63.5 mm
2.5 in
157 kN157 kN4550 rpm4800 rpm5.21 kg5210 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 3314OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 3314 AWithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3314 A-2Z/C3Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3314 A-2ZTN9/C3VT113Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3314 A/C3WithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3314 ANRWithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3314 ANR/C3WithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3314 A-Z/C3Shield on one sideNot recordedNot recordedSheet metalBearing steelGrease
FAG 3314-BD-XLWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3314-BD-XL-2HRS-TVH2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3314-BD-XL-2Z-TVH2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3314-BD-XL-2Z-TVH-L140-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL140 — Grease (L140/customer specific)
FAG 3314-BD-XL-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3314-BD-XL-TVHWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3314-BD-XL-TVH-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3314-DAWithout — Not sealedPN — Normal (ISO 492:2023)Not recordedJP — Steel sheet metalNot recordedWithout — Bearing not greased

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

3314

Angular contact ball bearing

View full technical record →SKF

331480 G

Four-row tapered roller bearing

View full technical record →SKF

3314 A

Double row angular contact ball bearing

View full technical record →SKF

3314 A-2Z/C3

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3314 A-2ZTN9/C3VT113

Double row angular contact ball bearing with seals or shields

View full technical record →SKF

3314 A/C3

Double row angular contact ball bearing

View full technical record →SKF

3314 ANR

Double row angular contact ball bearing

View full technical record →SKF

3314 ANR/C3

Double row angular contact ball bearing

View full technical record →SKF

3314 A-Z/C3

Double row angular contact ball bearing with seals or shields

View full technical record →FAG

3314-BD-XL

Angular contact ball bearing

View full technical record →FAG

3314-BD-XL-2HRS-TVH

Angular contact ball bearing

View full technical record →FAG

3314-BD-XL-2Z-TVH

Angular contact ball bearing

View full technical record →
Filter all 17 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search