99,016 bearing records · search, filter and compare

info@bearingscope.com
Find · understand · compare

3310 bearing dimensions & suffix variants

Look up recorded dimensions for designations beginning with 3310. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.

On this page5 sections

Find by measured dimensions

Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.

For tapered assemblies use total width T; for units or flanged bearings also check the mounting drawing.

Exact model evidence

3310 dimensions and recorded technical data

The recorded 3310 base designation measures 50×110×44.4 mm (inside diameter d × outside diameter D × width B). This answer uses unsuffixed records from KOYO. It does not assign the same dimensions or operating ratings to every suffix.

The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 33 recorded variants are listed. A dash means the value is missing, not zero.

Brand / full designationNamed dimensions (mm / in)Dynamic C (kN)Static C0 (kN)Reference speed (rpm)Limiting speed (rpm)Mass (kg / g)
KOYO3310Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
108 kN88.6 kN—3800 rpmLimiting Speeds(Grease Lub.): 3800 min-1Limiting Speeds(Oil Lub.): 5000 min-11.95 kg1950 g
SKF3310 ADouble row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.72 kg1720 g
SKF3310 A-2RS1Double row angular contact ball bearing with seals or shields
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
95 kN69.5 kN—4300 rpm1.71 kg1710 g
SKF3310 A-2RS1/C3Double row angular contact ball bearing with seals or shields
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN—4300 rpm1.71 kg1710 g
SKF3310 A-2RS1/C3MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN—4300 rpm1.71 kg1710 g
SKF3310 A-2RS1NR/C3Double row angular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN—4300 rpm1.73 kg1730 g
SKF3310 A-2ZDouble row angular contact ball bearing with seals or shields
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.71 kg1710 g
SKF3310 A-2Z/C3Double row angular contact ball bearing with seals or shields
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.71 kg1710 g
SKF3310 A-2Z/C3MT33Double row angular contact ball bearing with seals or shields
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.71 kg1710 g
SKF3310 A-2ZTN9/C3VT113Double row angular contact ball bearing with seals or shields
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.67 kg1670 g
SKF3310 A/C3Double row angular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.72 kg1720 g
SKF3310 ANRDouble row angular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.73 kg1730 g
SKF3310 ANR/C3Double row angular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.73 kg1730 g
SKF3310 ATN9Double row angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.68 kg1680 g
SKF3310 ATN9/C3Double row angular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN6000 rpm6000 rpm1.68 kg1680 g
SKF3310 A/W64Double row angular contact ball bearing
Recorded bore (d)
50 mm
1.968504 in
Recorded outside dimension (D)
110 mm
4.330709 in
Catalogue width (symbol unverified)
44.4 mm
1.748031 in
95 kN69.5 kN—1800 rpm1.94 kg1940 g
SKF3310 DMADouble row angular contact ball bearing with two-piece inner ring
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93.6 kN85 kN6700 rpm5600 rpm2.15 kg2150 g
SKF3310 DNRCBMDouble row angular contact ball bearing with snap ring and split inner ring
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
81.9 kN69.5 kN6700 rpm5600 rpm2.02 kg2020 g
FAG3310-BD-XLAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm6500 rpm1.79 kg1790 g
FAG3310-BD-XL-2HRSAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN—4900 rpm1.82 kg1820 g
FAG3310-BD-XL-2HRS-C3Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN—4900 rpm1.82 kg1820 g
FAG3310-BD-XL-2HRS-TVHAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN—4900 rpm1.78 kg1780 g
FAG3310-BD-XL-2HRS-TVH-C3Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN—4900 rpm1.78 kg1780 g
FAG3310-BD-XL-2ZAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm4900 rpm1.81 kg1810 g
FAG3310-BD-XL-2Z-C3Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm4900 rpm1.81 kg1810 g
FAG3310-BD-XL-2Z-TVHAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm4900 rpm1.77 kg1770 g
FAG3310-BD-XL-2Z-TVH-C3Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm4900 rpm1.78 kg1780 g
FAG3310-BD-XL-C3Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm6500 rpm1.79 kg1790 g
FAG3310-BD-XL-TVHAngular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm6500 rpm1.75 kg1750 g
FAG3310-BD-XL-TVH-C3Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm6500 rpm1.75 kg1750 g
FAG3310-BD-XL-TVH-L285Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm6500 rpm1.75 kg1750 g
FAG3310-BD-XL-TVH-L285-C3Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm6500 rpm1.75 kg1750 g
FAG3310-BD-XL-TVH-L285-C4Angular contact ball bearing
Bore diameter (d)
50 mm
1.968504 in
Outside diameter (D)
110 mm
4.330709 in
Width (B)
44.4 mm
1.748031 in
93 kN70 kN6300 rpm6500 rpm1.75 kg1750 g
Compare recorded seals, clearance, precision and materials

Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.

Brand / designationClosureOriginal precisionClearanceCageMaterialLubricant
KOYO 3310OpenNot recordedNot recordedNot recordedNot recordedNot recorded
SKF 3310 AWithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3310 A-2RS1Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3310 A-2RS1/C3Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3310 A-2RS1/C3MT33Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3310 A-2RS1NR/C3Seal on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3310 A-2ZShield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3310 A-2Z/C3Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3310 A-2Z/C3MT33Shield on both sidesNot recordedNot recordedSheet metalBearing steelGrease
SKF 3310 A-2ZTN9/C3VT113Shield on both sidesNot recordedNot recordedNon-metallicBearing steelGrease
SKF 3310 A/C3WithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3310 ANRWithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3310 ANR/C3WithoutNot recordedNot recordedSheet metalBearing steelNone
SKF 3310 ATN9WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3310 ATN9/C3WithoutNot recordedNot recordedNon-metallicBearing steelNone
SKF 3310 A/W64WithoutNot recordedNot recordedSheet metalBearing steelSolid Oil
SKF 3310 DMAWithoutNot recordedNot recordedMachined brassBearing steelNone
SKF 3310 DNRCBMWithoutNot recordedNot recordedMachined brassBearing steelNone
FAG 3310-BD-XLWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3310-BD-XL-2HRS2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3310-BD-XL-2HRS-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3310-BD-XL-2HRS-TVH2HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3310-BD-XL-2HRS-TVH-C32HRS — Contact seal on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3310-BD-XL-2Z2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3310-BD-XL-2Z-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedGA13 — Ball bearing and insert bearing grease
FAG 3310-BD-XL-2Z-TVH2Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3310-BD-XL-2Z-TVH-C32Z — Non-contact shield on both sidesP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedGA13 — Ball bearing and insert bearing grease
FAG 3310-BD-XL-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedJH — Steel sheet metalNot recordedWithout — Bearing not greased
FAG 3310-BD-XL-TVHWithout — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3310-BD-XL-TVH-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedWithout — Bearing not greased
FAG 3310-BD-XL-TVH-L285Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3310-BD-XL-TVH-L285-C3Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)
FAG 3310-BD-XL-TVH-L285-C4Without — Not sealedP6 — Class 6 (ISO 492:2023)Not recordedTVH — Solid cage made of glass-fiber reinforced polyamide PA66Not recordedL285 — Grease (L285/customer specific)

How to compare these values

  • Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
  • Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
  • C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
  • Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
  • A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Check load calculations →Estimate rating life →Decode the complete marking →Check replacement evidence →

Related prefix matches — other model numbers may appear

These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.

KOYO

3310

Angular contact ball bearing

View full technical record →FAG

33108

Tapered roller bearing

View full technical record →TIMKEN

33108

Tapered roller bearing

View full technical record →SKF

33108

Single row tapered roller bearing

View full technical record →TIMKEN

33108-90KA2

Tapered roller bearing

View full technical record →FAG

33108-DY

Tapered roller bearing

View full technical record →FAG

33108-H

Tapered roller bearing

View full technical record →KOYO

33108JR

Tapered roller bearing

View full technical record →FAG

33108-W60C

Tapered roller bearing

View full technical record →FAG

33108-XL

Tapered roller bearing

View full technical record →FAG

33109

Tapered roller bearing

View full technical record →TIMKEN

33109

Tapered roller bearing

View full technical record →
Filter all 52 prefix results →

Check the drawing before substituting

Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.

Measurement guide →Cross-reference checks →

Reference basis & data limits

Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.

Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.

Search the consolidated catalogue

Find, filter and compare bearing model data in one place.

Open model search