32240 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32240. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32240 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 20 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 32240
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
TIMKEN 32240 — 14 dimension fields
Tapered roller bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
This assembly is identified by cone X32240 and cup Y32240. T is the assembled width; B and C are the separate ring widths. A loose cone, a loose cup and the complete assembly are not the same item.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
The source lists differing metric/inch values for Shaft Backing Shoulder Dia. - Frontface (da). These values are retained as a visible source discrepancy; confirm the current drawing before using them.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 200 mm / 7.874 in |
| O.D. (D) | D | 360 mm / 14.1732 in |
| Width (T) | T | 104.000 mm / 4.0945 in |
| Inner Ring Width (B) | B | 98 mm / 3.8583 in |
| Outer Ring Width (C) | C | 82 mm / 3.2283 in |
| Effective Center Location | Not supplied separately | -20.3 mm / -0.8 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 5 mm / 0.197 in |
| Max Housing Fillet Radius | Not supplied separately | 4 mm / 0.16 in |
| Shaft Backing Shoulder Dia. - Frontface (da) | da | 229 mm / 9.21 in — source units differ; verify before use |
| Shaft Backing Shoulder Dia. - Backface (db) | db | 240 mm / 9.45 in |
| Housing Backing Shoulder Dia. - Frontface (Da) | Da | 340 mm / 13.39 in |
| Housing Backing Shoulder Dia. - Backface (Db) | Db | 326 mm / 12.83 in |
| Cage Location rel. to BF (Aa) | Aa | 15.5 mm / 0.61 in |
| Cage Location rel. to FF (Ab) | Ab | 7.4 mm / 0.29 in |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF32240Single row tapered roller bearing |
| 1300 kN | 2000 kN | 1300 rpm | 1700 rpm | 42.4 kg42400 g |
| TIMKEN32240Tapered roller bearing |
| 1390 kN | 2250 kN | — | — | 42.61 kg42610 g |
| SKF32240/DFMatched tapered roller bearings arranged face-to-face |
| 2229 kN | 4000 kN | 1000 rpm | 1700 rpm | 85 kg85000 g |
| SKF32240/DFC430Matched tapered roller bearings arranged face-to-face |
| 2229 kN | 4000 kN | 1000 rpm | 1700 rpm | 88.1 kg88100 g |
| SKF32240/DFC500Matched tapered roller bearings arranged face-to-face |
| 2229 kN | 4000 kN | 1000 rpm | 1700 rpm | 88.1 kg88100 g |
| FAG32240-A-J30PCTapered roller bearing |
| 1320 kN | 2080 kN | 1080 rpm | 1850 rpm | 42.9 kg42900 g |
| FAG32240-XLTapered roller bearing |
| 1570 kN | 2080 kN | 1080 rpm | 2230 rpm | 42.42 kg42420 g |
| FAG32240-XL>ATapered roller bearing |
| 1570 kN | 2080 kN | 1080 rpm | 2230 rpm | 42.8 kg42800 g |
| FAG32240-XL-DF-A0-50Tapered roller bearing set |
| 2700 kN | 4150 kN | 890 rpm | 2230 rpm | 88.3 kg88300 g |
| FAG32240-XL-DF-A350-400Tapered roller bearing set |
| 2700 kN | 4150 kN | 890 rpm | 2230 rpm | 88.7 kg88700 g |
| FAG32240-XL-DF-A350-400>CTapered roller bearing set |
| 2700 kN | 4150 kN | 890 rpm | 2230 rpm | 88.7 kg88700 g |
| FAG32240-XL-DF-A400-450Tapered roller bearing set |
| 2700 kN | 4150 kN | 890 rpm | 2230 rpm | 88.7 kg88700 g |
| FAG32240-XL-DF-A400-450>ATapered roller bearing set |
| 2700 kN | 4150 kN | 890 rpm | 2230 rpm | 88.7 kg88700 g |
| FAG32240-XL-DF-A500-550Tapered roller bearing set |
| 2700 kN | 4150 kN | 890 rpm | 2230 rpm | 88.7 kg88700 g |
| FAG32240-XL-DF-A500-550>BTapered roller bearing set |
| 2700 kN | 4150 kN | 890 rpm | 2230 rpm | 89 kg89000 g |
| FAG32240-XL-DF-J30PC-A500-550Tapered roller bearing set |
| 2700 kN | 4150 kN | 890 rpm | 2230 rpm | 88.2 kg88200 g |
| FAG32240-XL-J30PCTapered roller bearing |
| 1570 kN | 2080 kN | 1080 rpm | 2230 rpm | 42.8 kg42800 g |
| FAG32240-XL-P5Tapered roller bearing |
| 1570 kN | 2080 kN | 1080 rpm | 2230 rpm | 42.42 kg42420 g |
| TIMKEN32240-90KA2Tapered roller bearing |
| 1390 kN | 2250 kN | — | — | 42.61 kg42610 g |
| KOYO32240JRTapered roller bearing |
| 1550 kN | 1880 kN | — | 960 rpmLimiting Speeds(Grease Lub.): 960 min-1Limiting Speeds(Oil Lub.): 1300 min-1 | 44.2 kg44200 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 32240 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| TIMKEN 32240 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| SKF 32240/DF | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32240/DFC430 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| SKF 32240/DFC500 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32240-A-J30PC | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL>A | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-DF-A0-50 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-DF-A350-400 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-DF-A350-400>C | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-DF-A400-450 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-DF-A400-450>A | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-DF-A500-550 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-DF-A500-550>B | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-DF-J30PC-A500-550 | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-J30PC | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32240-XL-P5 | Not recorded | P5 — Class 5 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| TIMKEN 32240-90KA2 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| KOYO 32240JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
32240
Tapered roller bearing
View full technical record →SKF32240
Single row tapered roller bearing
View full technical record →TIMKEN32240-90KA2
Tapered roller bearing
View full technical record →FAG32240-A-J30PC
Tapered roller bearing
View full technical record →SKF32240/DF
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32240/DFC430
Matched tapered roller bearings arranged face-to-face
View full technical record →SKF32240/DFC500
Matched tapered roller bearings arranged face-to-face
View full technical record →KOYO32240JR
Tapered roller bearing
View full technical record →FAG32240-XL
Tapered roller bearing
View full technical record →FAG32240-XL>A
Tapered roller bearing
View full technical record →FAG32240-XL-DF-A0-50
Tapered roller bearing set
View full technical record →FAG32240-XL-DF-A350-400
Tapered roller bearing set
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.