32213 bearing dimensions & suffix variants
Look up recorded dimensions for designations beginning with 32213. The table retains complete manufacturer designations so special suffixes and different dimensional variants remain visible.
On this page5 sections ⌄
Find by measured dimensions
Enter bore d, outside diameter D and width B. Use decimals or inch fractions such as 1/2 or 1 1/4.
32213 dimensions and recorded technical data
Use the named dimensions for each complete record below. A generic d×D×B answer is not asserted where the base record is missing, dimension symbols are unverified, or the product uses a different geometry such as a housing or thrust assembly. Suffix records are not substituted for a missing base specification.
The numeric series boundary is preserved: a longer number is not included merely because its first digits match. 16 recorded variants are listed. A dash means the value is missing, not zero.
Read the original dimensions for 32213
Boundary size alone does not describe every ring, shoulder or assembled unit. These tables retain the recorded manufacturer labels, symbols, units and limits for each complete marking. Expand a record to check its detailed measurements.
Important: an approximate value, a minimum or a maximum keeps that qualifier. These reference extracts are not CAD drawings, fit recommendations or replacement approvals.
TIMKEN 32213 — 14 dimension fields
Tapered roller bearing. Source: Timken official dimensional catalogue; recorded snapshot 2026-10-01.
Metric and inch measurements below are the values published together in this dated manufacturer record. Their displayed rounding is retained; the inch column does not turn a metric design into an inch-series design.
This assembly is identified by cone X32213 and cup Y32213. T is the assembled width; B and C are the separate ring widths. A loose cone, a loose cup and the complete assembly are not the same item.
Shaft and housing backing-shoulder dimensions, maximum fillet radii and signed offsets answer different installation questions. Preserve the named face, limit and sign; they are not additional bearing outside diameters or nominal widths.
This factual extract is a dimensional reference, not an OEM fitment statement, a replacement approval or a downloadable CAD model.
Bearing and component measurements
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Bore (d) | d | 65 mm / 2.5591 in |
| O.D. (D) | D | 120 mm / 4.7244 in |
| Width (T) | T | 32.750 mm / 1.2894 in |
| Inner Ring Width (B) | B | 31.000 mm / 1.2205 in |
| Outer Ring Width (C) | C | 27 mm / 1.063 in |
| Effective Center Location | Not supplied separately | -5.6 mm / -0.22 in |
Mounting limits and abutments
| Measurement | Source symbol | Recorded value |
|---|---|---|
| Max Shaft Fillet Radius | Not supplied separately | 2.030 mm / 0.080 in |
| Max Housing Fillet Radius | Not supplied separately | 1.52 mm / 0.06 in |
| Shaft Backing Shoulder Dia. - Frontface (da) | da | 73 mm / 2.87 in |
| Shaft Backing Shoulder Dia. - Backface (db) | db | 77 mm / 3.03 in |
| Housing Backing Shoulder Dia. - Frontface (Da) | Da | 115.06 mm / 4.53 in |
| Housing Backing Shoulder Dia. - Backface (Db) | Db | 107.95 mm / 4.25 in |
| Cage Location rel. to BF (Aa) | Aa | 3 mm / 0.12 in |
| Cage Location rel. to FF (Ab) | Ab | 4.1 mm / 0.16 in |
Catalogue parameters for 32213
Choose the complete brand and marking before reading a value. These source-labelled records add dimensions, construction and engineering properties where they were recorded; a shared model number does not establish interchangeability.
Units, ranges and minimum/maximum qualifiers are retained. The data is a dated catalogue reference, not a certified drawing, a complete current specification or an operating approval.
SKF 32213 — 52 recorded parameters
Single row tapered roller bearing
Reference: SKF product catalogue; source snapshot 2026-09-02.
Keep total assembly width distinct from inner- and outer-ring widths. The same nominal bore does not establish a matching cup/cone set.
Values shown are retained from the recorded source. Zero boundary dimensions and zero load ratings from incomplete legacy feeds are withheld rather than presented as usable specifications.
Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | Not separately recorded | 65.0 mm |
| Outside diameter | Not separately recorded | 120.0 mm |
| Width, total | Not separately recorded | 32.75 mm |
| Width, inner ring | Not separately recorded | 31.0 mm |
| Width, outer ring | Not separately recorded | 27.0 mm |
| Contact angle | Not separately recorded | 15.1 ° |
Performance
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Basic dynamic load rating | Not separately recorded | 186.0 kN |
| Basic static load rating | Not separately recorded | 193.0 kN |
| Reference speed | Not separately recorded | 4500.0 r/min |
| Limiting speed | Not separately recorded | 5600.0 r/min |
| SKF performance class | Not separately recorded | SKF Explorer |
Properties
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bearing part | Not separately recorded | Complete bearing |
| Number of rows | Not separately recorded | 1 |
| Locating feature, bearing outer ring | Not separately recorded | Without |
| Bore type | Not separately recorded | Cylindrical |
| Cage | Not separately recorded | Sheet metal |
| Arrangement of contact angle (double-row bearing) | Not separately recorded | Not applicable |
| Matched arrangement | Not separately recorded | No |
| Coating | Not separately recorded | Without |
| Sealing | Not separately recorded | Without |
| Relubrication feature | Not separately recorded | Without |
| Unit system | Not separately recorded | Metric |
| Indicative carbon footprint for new product | Not separately recorded | 5.5 kg CO 2 e |
Logistics
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Product net weight | Not separately recorded | 1.48 kg |
Engineering — Engineering specifications
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Dimension series | Not separately recorded | 3EC |
Engineering — Dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Bore diameter | d | 65 mm |
| Outside diameter | D | 120 mm |
| Bearing width, total | T | 32.75 mm |
| Shoulder diameter of inner ring | d 1 | ≈ 90.3 mm |
| Width of inner ring | B | 31 mm |
| Width of outer ring | C | 27 mm |
| Chamfer dimension of inner ring | r 1,2 | min. 2 mm |
| Chamfer dimension of outer ring | r 3,4 | min. 1.5 mm |
| Distance side face to pressure point | a | 26.55 mm |
Engineering — Abutment dimensions
| Parameter | Source symbol | Recorded value |
|---|---|---|
| Diameter of shaft abutment | d a | max. 76 mm |
| Diameter of shaft abutment | d b | min. 75.5 mm |
| Diameter of housing abutment | D a | min. 104 mm |
| Diameter of housing abutment | D a | max. 111.5 mm |
| Diameter of housing abutment | D b | min. 115 mm |
| Minimum width of space required in housing on large side face | C a | min. 4 mm |
| Minimum width of space required in housing on small side face | C b | min. 5.5 mm |
| Radius of shaft fillet | r a | max. 2 mm |
| Radius of housing fillet | r b | max. 1.5 mm |
Engineering — Calculation data
| Parameter | Source symbol | Recorded value |
|---|---|---|
| SKF performance class | Not separately recorded | SKF Explorer |
| Basic dynamic load rating | C | 186 kN |
| Basic static load rating | C 0 | 193 kN |
| Fatigue load limit | P u | 22.8 kN |
| Reference speed | Not separately recorded | 4500 r/min |
| Limiting speed | Not separately recorded | 5600 r/min |
| Limiting value | e | 0.4 |
| Calculation factor | Y | 1.5 |
| Calculation factor | Y 0 | 0.8 |
No recorded variant matches these filters. Clear a filter to see other records; no substitute has been inferred.
| Brand / full designation | Named dimensions (mm / in) | Dynamic C (kN) | Static C0 (kN) | Reference speed (rpm) | Limiting speed (rpm) | Mass (kg / g) |
|---|---|---|---|---|---|---|
| SKF32213Single row tapered roller bearing |
| 186 kN | 193 kN | 4500 rpm | 5600 rpm | 1.48 kg1480 g |
| TIMKEN32213Tapered roller bearing |
| 174 kN | 209 kN | — | — | 1.51 kg1510 g |
| SKF32213/VA983Special single row tapered roller bearing |
| 172 kN | 208 kN | 4000 rpm | 5600 rpm | 1.55 kg1550 g |
| FAG32213-ATapered roller bearing |
| 156 kN | 200 kN | 3600 rpm | 5900 rpm | 1.553 kg1553 g |
| FAG32213-A>BTapered roller bearing |
| 156 kN | 200 kN | 3600 rpm | 5900 rpm | 1.224 kg1224 g |
| FAG32213-A-P5Tapered roller bearing |
| 156 kN | 200 kN | 3600 rpm | 5900 rpm | 1.551 kg1551 g |
| FAG32213-BTapered roller bearing |
| 147 kN | 185 kN | 3750 rpm | 5900 rpm | 1.53 kg1530 g |
| FAG32213-B-XLTapered roller bearing |
| 183 kN | 185 kN | 3750 rpm | 7100 rpm | 1.53 kg1530 g |
| FAG32213-DYTapered roller bearing |
| 149 kN | 189 kN | 3650 rpm | 6000 rpm | 1.56 kg1560 g |
| FAG32213-HTapered roller bearing |
| 148 kN | 200 kN | 3600 rpm | 4720 rpm | 1.56 kg1560 g |
| FAG32213-XLTapered roller bearing |
| 195 kN | 202 kN | 3600 rpm | 7200 rpm | 1.55 kg1550 g |
| KOYO32213CRTapered roller bearing |
| 190 kN | 198 kN | — | 3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4300 min-1 | 1.55 kg1550 g |
| KOYO32213JAutomotive bearing |
| — | — | — | — | 1.49 kg1490 g |
| KOYO32213JRTapered roller bearing |
| 196 kN | 203 kN | — | 3200 rpmLimiting Speeds(Grease Lub.): 3200 min-1Limiting Speeds(Oil Lub.): 4300 min-1 | 1.58 kg1580 g |
| KOYO32213JR-9Automotive bearing |
| — | — | — | — | 1.55 kg1550 g |
| KOYO32213JRHR4LFTAutomotive bearing |
| — | — | — | — | 1.55 kg1550 g |
Compare recorded seals, clearance, precision and materials
Manufacturer wording is retained. A missing property is not inferred from another brand or a similar suffix.
| Brand / designation | Closure | Original precision | Clearance | Cage | Material | Lubricant |
|---|---|---|---|---|---|---|
| SKF 32213 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| TIMKEN 32213 | Open | ABMA Class K | Not recorded | Steel cage | Not recorded | Not recorded |
| SKF 32213/VA983 | Without | Not recorded | Not recorded | Sheet metal | Not recorded | None |
| FAG 32213-A | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32213-A>B | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32213-A-P5 | Not recorded | P5 — Class 5 (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32213-B | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32213-B-XL | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32213-DY | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32213-H | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| FAG 32213-XL | Not recorded | PN — Normal (ISO 492:2023) | Not recorded | Standard — Sheet steel cage, window cage, roller-guided | Not recorded | Not recorded |
| KOYO 32213CR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 32213J | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 32213JR | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 32213JR-9 | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
| KOYO 32213JRHR4LFT | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded | Not recorded |
How to compare these values
- Use the displayed dimension names and original symbols. Housing length L, height H2 and flange width are not bearing outside diameter D. A catalogue width with an unverified symbol must not be assumed to be inner-ring width B or assembly width T. Open the product record for mounting dimensions and geometry.
- Inch values are calculated from the recorded millimetres using 25.4 mm per inch, rounded to six decimal places. They do not change a metric bearing into an inch-series bearing. Gram values are converted from the recorded mass in kilograms.
- C and C0 describe different rating conditions. They are not a single safe working-load limit and cannot replace an application load calculation.
- Reference and limiting speeds are separate catalogue values. The source grease/oil context is shown where recorded. Lubricant, seals, loads, fit, clearance and cooling affect the usable operating speed.
- A common base number does not prove equivalent seals, clearance, precision, material or interchangeability. Open the full designation for these fields.
Related prefix matches — other model numbers may appear
These discovery results can contain a longer number or a different component. They are not specifications for the requested exact model. Open the complete product to inspect its original geometry.
32213
Tapered roller bearing
View full technical record →SKF32213
Single row tapered roller bearing
View full technical record →FAG32213-A
Tapered roller bearing
View full technical record →FAG32213-A>B
Tapered roller bearing
View full technical record →FAG32213-A-P5
Tapered roller bearing
View full technical record →FAG32213-B
Tapered roller bearing
View full technical record →FAG32213-B-XL
Tapered roller bearing
View full technical record →KOYO32213CR
Tapered roller bearing
View full technical record →FAG32213-DY
Tapered roller bearing
View full technical record →FAG32213-H
Tapered roller bearing
View full technical record →KOYO32213J
Automotive bearing
View full technical record →KOYO32213JR
Tapered roller bearing
View full technical record →Check the drawing before substituting
Nominal dimensions are not shaft-fit tolerances. Different variants can add grooves, flanges, wider rings or assembly components. When the table has different dimensions, the complete designation—not the shared prefix—controls.
Reference basis & data limits
Manufacturer terminology is retained in the product records. Technical reference basis: JTEKT Basic Bearing Knowledge (boundary dimensions, tolerance classes and lubrication); NSK Bearing ABCs (lubrication, designations and clearance); NTN technical FAQs (closure codes and component interchange); SKF rolling-bearing selection and maintenance references.
Selection workflows and catalogue grouping are BearingScope editorial aids. Verify the current drawing and application requirements before using a candidate. Missing database information is not converted into an assumed match.